absorption trap
General usage:
Absorption of noxious acid fumes and gasses without mechanical
fume extraction. It is usually used in conjunction with Kjeldahl
digestions and Friedel-Craft reactions
Material:
Boro-silicate glass
Features:
An apparatus consisting of a bulb trap on top of which is fitted a
cylinder comprising of a porosity 1 sintered disc, a drip tube and
ground cones and sockets on each component
Modifications:
Alternate socket and cone sizes
Operation:
The assembled trap is fitted onto a Kjeldahl flask and the bulb is
half filled with a 10% sodium hydroxide solution. Fumes that are
evolved force the solution into the cylinder until the level drops
below the drip tube in the bulb. Fumes then pass up through the
sintered disc which assists absorption by fine division of the bubbles
Blocked pores of the sintered disc could cause the apparatus to
blow apart
CAPACITY ml
250
JOINTS
B24
CATALOGUE #
24068365
acid bottles
General usage:
Storage of acids and other corrosive liquids
Material:
Soda-lime glass
Features:
A bottle with a ground socket neck and penny-head stopper
A ground in cap fits over the neck to give added protection against leakage of fumes
CAPACITY ml
500
1000
CATALOGUE #
052127544
052127554
552
adapters - apparatus joint manipulation
General usage:
Connecting dissimilar sized ground joints in apparatus assemblies
Material:
Boro-silicate glass
Modifications:
Addition of spring hooks
Accessories:
● Keck clip for clamping the joints
● High vacuum grease
● Holding springs
CONICAL/SPHERICAL ADAPTERS
Specific usage:
Connecting conical and spherical joints
Features:
● The cone/cup adapter has a cup at the top and cone at the bottom
● The socket/ball adapter has a socket at the top and ball at the bottom
CODE
CC3/35
SB3/35
CONICAL JOINTS
B24 cone
B24 socket
SPHERICAL JOINTS
S35 cup
S35 ball
CATALOGUE #
242065
242075
EXPANSION AND REDUCTION CONICAL ADAPTERS
Specific usage:
● Expand from socket to cone
● Reduce from socket to cone
Features:
● The expansion adapter has a large socket at the top and small cone at the bottom
● The reduction adapter has a small socket at the top and large cone at the bottom
CODE
JOINTS
cone to socket
B10 to B14
B14 to B19
B14 to B24
B14 to B29
B19 to B24
B19 to B29
B19 to B34
B24 to B29
B24 to B34
B29 to B24
B29 to B34
B29 to B40
B29 to B45
XA10
XA21
XA31
XA41
XA32
XA42
XA52
XA43
XA53
XA54
XA64
XA74
CATALOGUE #
CODE
2420831
2420843
2420853
2420863
2420854
2420864
2420874
2420865
2420875
2420876
2420884
2420886
2420896
DA01
DA12
DA13
DA14
DA23
DA24
DA34
DA25
DA35
DA45
DA48
JOINTS
cone to socket
B14 to B10
B19 to B14
B24 to B14
B29 to B14
B24 to B10
B24 to B19
B29 to B19
B29 to B24
B34 to B19
B34 to B24
B34 to B29
B50 to B29
CATALOGUE #
2420913
2420934
2420935
2420936
2420941
2420945
5420946
2420956
2420947
2420957
2420967
2420960
adapters - flexible joint manipulation
Usage:
Joining misaligned conical joints in apparatus assemblies
Material:
PTFE
Features:
Bellows tube with a cone on one end and a socket on the other end
JOINTS
B24
B29
B34
CATALOGUE #
1K1047
1K1048
1K1049
553
adapters - multiple connection
General usage:
Multiple connection of ground joints in apparatus assemblies
Material:
Boro-silicate glass
Modifications:
Addition of spring hooks
Accessories:
● Keck clip for clamping the joints
● High vacuum grease
● Holding springs
Features:
●
●
●
●
TYPE
2 necks parallel
CODE
MA1/00
MA1/11
MA1/2
MA1/3
MA1/33
MA1/44
MA2/2
MA2/3
RA4/11
RA4/22
RA4/23
MA4/23
-
2 necks, 1 at 450
2 necks, 1 at 150
3 necks, 1 at 450
The
The
The
The
adapter
adapter
adapter
adapter
with
with
with
with
parallel necks has two sockets at the top and a cone at the bottom
two necks, one at 45 º, has two sockets at the top and a cone at the bottom
two necks, one at 15 º, has two sockets at the top and a cone, with a drip-tip, at the bottom
three necks has two vertical and one at 45 º with sockets at the top and a cone at the bottom
JOINTS
B10
B14
B19
B19/B24
B19/B29
B24
B24/B29
B29
B19
B19/B24
B14
B19
B19/B24
B24/B29
B24
B29
CATALOGUE #
2422411
2422433
2422444
2422445
2422446
2422455
2422456
2422466
2422544
2422545
2422633
2422644
2422645
2422656
2422744
2422755
2422766
adapters - pourers
General usage:
Facilitate pouring from ground neck bottles and flasks
Material:
Boro-silicate glass
Features:
Ground cone fitted with a pouring spout
Modifications:
Addition of hooks to hold springs
Accessories:
● Keck clip for clamping the joints
● High vacuum grease
● Holding springs
NECK mm
B14
B19
B24
B29
CATALOGUE #
240003
240004
240005
240006
554
adapters - receivers
General usage:
Directing delivery and distribution of end product from reactions in apparatus assemblies
Material:
Boro-silicate glass
Modifications:
Addition of hooks to hold springs
Accessories:
● Keck clip for clamping the joints
● High vacuum grease
● Holding springs
VERTICAL DELIVERY TUBE
Specific usage:
In conjunction with a distribution chamber to avoid having to interrupt a reaction when a receiving vessel becomes full
Features:
A socket with a cone underneath and a sideways drip tip
BENDS
Specific usage:
Usually at the delivery end of a condenser used angled in an assembly for distributing into a flask. An optional tube prevents
vacuum build up
Features:
A bent tube with a socket at one end and a skirted cone at the other
FEEDERS
Specific usage:
Delivery into vessels allowing receiving vessels to be removed without interruption of reactions with slow delivery
Features:
A socket with a straight or bent delivery tube
TYPE
Vertical delivery
Bend
CODE
RA11/2
RA9/11
RA9/22
RA9/23
RA9/33
RA9/44
RA1/01
RA1/02
RA1/03
RA1/04
RA1/11
RA1/12
RA1/13
RA1/14
RA1/22
RA1/23
-
Short stem bent feeder
Long stem bent feeder
Short stem feeder
Long stem feeder
JOINTS
B19
B14
B19
B19/B24
B24
B29
B14
B19
B24
B29
B14
B19
B24
B29
B14
B19
B24
B29
B14
B19
B24
B29
CATALOGUE #
2421044
2423033
2423044
2423045
2423055
2423066
2423213
2423214
2423215
2423216
2423223
2423224
2423225
2423226
2423313
2423314
2423315
2423316
2423413
2423414
2423415
2423416
555
adapters - stopcocks
General usage:
Connection of stopcocks to ground joints in apparatus assemblies
Material:
Boro-silicate glass
Features:
Stopcocks with conical jointed, and/or tubing connection, inlets
and outlets
Modifications:
● Addition of hooks to hold springs
● Screwthread tubing connector
● Alternate joints
Accessories:
● Keck clip for clamping the joints
● High vacuum grease
● Holding springs
TYPE
Cone and socket
Cone and socket
Cone and socket
Cone and tubing
Cone and tubing
Cone and tubing
Socket and tubing
Distillate
Vacuum/cone
CODE
EF6T/55
MF/11/1B
MF/11/2B
MF/11/3B
MF/11/4B
MF/11/5B
MF14/2
FC15/2
TF6/24/2
JOINTS
B24
B14
B19
B24
B29
B34
B19
B19
B19
CATALOGUE #
242155
242163
242164
242165
242166
242167
24217
24218
24219
adapters - thermometer
General usage:
Introduction of thermometers into apparatus assemblies
Material:
Boro-silicate glass
Features:
Cone with thermometer receiving inlet. The insertion and swan-neck
adapters have GL14 screw threads for receiving standard width
thermometers
Modifications:
● Addition of hooks to hold springs
● Alternate joints
Accessories:
● Keck clip for clamping the joints
● Screwcap for thermometer
● Holding springs
● Thermometer
● High vacuum grease
TYPE
Insertion
CODE
ST51/13
ST52/13
ST53/13
ST54/13
MA6/11
MA6/22
MA6/23
MA6/33
SH4A
CATALOGUE #
240273
240274
240275
240276
2422833
2422844
2422845
2422855
243153
Swan-neck
Pocket
JOINTS
B14 cone
B19 cone
B24 cone
B29 cone
B14 socket & cone
B19 socket & cone
B19 socket, B24 cone
B24 socket & cone
B14 cone
556
adapters - tubing
General usage:
Receiving and distribution of end product from reactions
Material:
Boro-silicate glass
Features:
A cone with or without a socket and a tubing connection olive
Modifications:
● Alternative screw thread tubing connection
● Addition of hooks to hold springs
Accessories:
● Keck clip for clamping the joints
● Springs
● High vacuum grease
CODE
MF10/1B
MF10/2B
MF10/3B
MF10/4B
MF10/5B
MF18/2
MF18/33
MF18/44
JOINTS
B14 cone
B19 cone
B24 cone
B29 cone
B34 cone
B19 cone & socket
B24 cone & socket
B29 cone & socket
CATALOGUE #
242123
242124
242125
242126
242127
242144
242145
242146
aneroid barometer
Usage:
Measuring atmospheric pressure
Features:
●
●
●
●
Wooden case
Glass front
Stainless steel dial
Setting screw
CATALOGUE #
AB001
arsenic determination set
Usage:
Determination of arsenic and antimony
Material:
Boro-silicate glass
Components:
● Absorption tube
● 100ml Erlenmeyer flask
Modifications:
● Alternate size joints
● Addition of hooks to hold springs
Operation:
The apparatus is designed for the estimation of arsenic by the method that uses the formation of a complex
between arsine silver diethyldithiocarbamate with subsequent measurement at 538 nanometers.
Arsine is liberated in the flask and reacts with the reagent, that is placed in the limb of the U-tube
JOINTS
B24
CATALOGUE #
ZGA010001
557
aspirators
Usage:
Storage and dispensing of liquids.
Material:
Boro-silicate glass
Features:
●
●
●
●
●
●
CAPACITY litres
.5
1
2
5
10
20
25
50
Soda-lime glass
Polyethylene
Screwcap
Spindle valve
Stopper
Stopcock
Carry handles
Stopcock
BORO-SILICATE GLASS
STOPPERED
CATALOGUE #
2470144
2470154
2470163
2470173
2470186
2470191
SCREWCAP
CATALOGUE #
2470354
2470363
052470373
052470386
SODA-LIME GLASS
POLYETHYLENE
CATALOGUE #
CATALOGUE #
05769203
05769204
1K1660
1K1662
1K1664
1K1666
SPARE STOPCOCKS
NECK
B19 cone
B24 cone
B29 cone
GL32 4mm bore
GL32 8mm bore
¾" BSP thread
GLASS KEY
CATALOGUE #
241484G
241486G
241487G
PTFE KEY
CATALOGUE #
241484T
241486T
241487T
SPINDLE VALVE
CATALOGUE #
241482V
241481V
241480V
2414703
052414704
PLASTIC
CATALOGUE #
1K375
558
beakers - glass
Usage:
Mixing and boiling of liquids. The tall form is usually used in a water or sand bath
Material:
Boro-silicate glass
Features:
● Graduations
● Lipped rim
Accessories:
●
●
●
●
●
CAPACITY ml
5
10
25
50
100
150
250
400
600
800
1000
2000
3000
5000
Watch glass for cover
Brush
Stirring rods
Magnetic stirrer bars
Tongs
SQUAT
CATALOGUE #
0521106070
0521106080
0521106140
0521106170
0521106240
0521106290
0521106360
0521106410
0521106480
0521106530
0521106540
0521106630
0521106680
0521106730
TALL spout
CATALOGUE #
0521116170
0521116240
0521116290
0521116360
0521116410
0521116480
0521116530
0521116540
0521116630
0521116680
TALL no spout
CATALOGUE #
052111724
052111736
052111748
559
beakers - glass, special purpose
Material:
Boro-silicate glass
Accessories:
●
●
●
●
●
HEAVY WALL
Specific usage:
Features:
JACKETED
Specific usage:
Watch glass for cover
Brush
Stirring rods
Magnetic stirrer bars
Tongs
Boiling and mixing of very corrosive or hot liquids
●
●
●
●
Extra thick glass
Graduations
Straight rim
Spout
Maintaining liquids at a constant temperature
Features:
Rimless tall form beaker inside a closed jacket with standard 9mm
water inlet and outlet tubing connection olives
Modifications:
Alternate screw thread tubing connections
Specific accessory:
Screw thread tubing connectors
PHILIPS
Specific usage:
Reduction of evaporation due to the smaller surface area for the volume
Features:
CAPACITY ml
100
150
250
500
600
1000
2000
5000
● Conical shape
● Spout
● Lipped rim
HEAVY WALL
CATALOGUE #
0521131240
0521131290
0521131360
0521131440
JACKETED
CATALOGUE #
2401424
2401436
PHILIPS
CATALOGUE #
0521141290
0521141360
0521141440
2401448
0521131540
0521131630
0521131730
beakers - plastic
Material:
Plastic
Features:
● Spout
● Lipped rim
● Graduations
Accessories:
●
●
●
●
●
Watch glass for cover
Brush
Stirring rods
Magnetic stirrer bars
Tongs
A 250ml beaker is available in PFA
CAPACITY ml
25
50
100
150
250
500
600
1000
2000
POLYPROPYLENE
CATALOGUE #
1K1801
1K1802
1K1803
06609-081
1K1805
1K1806
06612081
1K1808
1K1809
PMA (TPX)
CATALOGUE #
1K1541
1K1542
1K1543
PTFE
CATALOGUE #
1K717
1K718
PFA
CATALOGUE #
1K1534
1K1535
1K1536
1K1544
1K1545
1K720
1K721
1K1537
1K1538
1K1546
1K1547
1K723
1K1539
560
beehive shelf
General usage:
Supporting gas jars in apparatus assemblies for the collection of lighter than air gasses
Material:
Porcelain
Operation:
The bee hive shelf is usually placed in a trough of water. A bent glass tube from the gas
generating apparatus is led under the shelf through the arch. The gas bubbles upwards
through the hole for collection
SIZE mm
40 x 100
CATALOGUE #
0600420
bell jar
General usage:
Collecting gasses from a reaction
Material:
Soda-lime-glass
Features:
● Bell shaped vessel with ground neck and flat flange ground base
● Penny-head stopper
CAPACITY ml
2000
CATALOGUE #
BJ250150
bench blotter
Usage:
Fluid barrier for laboratory benches; to absorb spillages
Material:
Blotting paper
Properties:
● Super absorbent
● Impermeable polyethylene backing
● Ashes readily on incineration
AVAILABILITY
Sheet
Roll
SIZE m
4.6 x .5
4.6 x 57
CATALOGUE #
02-2000-100
02-2000-050
561
bio steam chambers
Usage:
Reservoir flask in essential oil distillation apparatus assemblies
Material:
Boro-silicate glass
Features:
● B34 socket on single neck chamber and B34 angled neck with B24 centre neck on 2 neck chamber
● B24 cone and short Vigreux column above the cone
Modifications:
● Alternate cone and socket/s.
● Addition of hooks to hold springs
NECKS
1
2
CAPACITY ml
2000
2000
CATALOGUE #
240616
240626
boiling flasks - ground necks
General usage:
Boiling of liquids in apparatus assemblies. They are usually heated by
heating mantles, liquid baths or burners. Round bottom flasks can be
used under vacuum, but only if the surface of the glass is undamaged
Material:
Boro-silicate glass
Features:
● Spherical vessel with round or flat bottom
● Ground neck to receive manipulative conical joints
Modifications:
● Retaining hooks for springs
Accessories:
● Stopper
● Magnetic stirrer bar
CAPACITY ml
25
50
50
50
100
100
100
250
250
250
500
500
500
1000
1000
1000
2000
2000
NECK mm
B14
B14
B19
B24
B14
B19
B24
B19
B24
B29
B24
B29
B34
B24
B29
B34
B29
B34
ROUND BOTTOM
CATALOGUE #
2417012
2417013
2417014
2417015
2417024
2417025
2417026
2417034
2417036
2417037
2417044
2417046
2417047
2417054
2417056
2417057
2417063
2417067
FLAT BOTTOM
CATALOGUE #
2417112
2417113
2417114
2417115
2417123
2417124
2417126
2417134
2417136
2417137
2417144
2417146
2417147
2417154
2417156
2417157
2417163
2417167
562
boiling flasks - straight necks
General usage:
Boiling of liquids in distillation, reaction, extraction, freeze drying etc. They are usually heated by heating mantles, liquid baths or burners.
Round bottom flasks can be used under vacuum, but only if the surface of the glass is undamaged (bruising, scratching, etc.)
Material:
● Boro-silicate glass
Features:
● Round or flat bottomed spherical vessel
● Narrow or wide neck with lipped rim
Modifications:
● Addition of side arm for septum
● Retaining hooks for springs
Accessories:
● Rubber bung
● Magnetic stirrer bar
● Support for round bottom flask
Do not use flat bottom flasks under pressure
CAPACITY ml
NARROW NECK 50
100
250
500
1000
2000
5000
10000
WIDE NECK 50
100
250
500
1000
2000
SUPPORT
NECK mm
34
22
34
34
42
42
50
65
35
34
50
50
50
72
ROUND BOTTOM
CATALOGUE #
0521721170
0521721240
0521721360
0521721440
0521721540
0521721640
0521721730
0521721860
0521741170
0521741240
0521741360
0521741440
0521741540
0521741640
FLAT BOTTOM
CATALOGUE #
0521711170
0521711240
0521711360
0521711440
0521711540
0521711640
0521731170
0521731240
0521731360
0521731440
0521731540
0521731640
1B38950
boiling rod
General usage:
Stirring of boiling liquids
Material:
Boro-silicate glass
Features:
Rod with tubular end
SIZE mm
6 x 250
CATALOGUE #
BR2506
bosshead
º
General usage:
Clamping scaffold components at 90
Material:
Stainless steel
Features:
● Moulded casing with cut-outs at 90 to each other
● Thumb screws
Accessories:
● Retort stand
º
CATALOGUE #
08080310
563
bottle top dispensers
General usage:
Dispensing of liquids from bottles
Material:
PTFE, PFA, FEP and borosilicate glass
Specifications:
●
●
●
●
Conforms to DIN 12600
Accuracy <+ 0.5% (Nominal volume 2.5ml <+0.6%)
Coefficient of variation < 0.1%
Completely autoclavable at 121ºC
Box contents:
●
●
●
●
●
●
Dispenser
Telescopic intake tube
Three adapters
Instruction manual
Certificate of conformity
Mounting tool
Features:
● Recirculation valve and media-specific recalibration
● Positive displacement plunger to minimise crystallisation of liquids and clogging with
360º swivel head
● The Genius and Simplex have variable volume;
the Simple Fix has fixed volume.
● The Genius has a recirculation valve and media-specific recalibration
Accessories:
● Reservoir bottle of choice
● Adapter for ground neck bottle
● GL thread adapter
CAPACITY ml &
GRADUATION ml
0.1 - 2.5 / 0.05
0.5 - 5 / 0.1
1.0 - 10 / 0.2
2.5 - 25 / 0.5
5 - 50 / 1
10 - 100 / 2
1,0 - 10ml
GL THREAD &
ADAPTER
32 - GL 28, 40, 45
32 - GL 28, 40, 45
32 - GL 28, 40, 45
45 - GL 32, 38, S 40
45 - GL 32, 38, S 40
45 - GL 32, 38, S 40
GL32 - GL28, 40, 45
MICRO
Material:
Features:
GENIUS
CATALOGUE #
1605503
1605504
1605505
1605506
1605507
1605508
1606515
SIMPLEX
CATALOGUE #
1601503
1601504
1601505
1601506
1601507
1601508
For hydrofluoric acid (HF)
SIMPLEX FIX
CATALOGUE #
1602502
1602504
1602505
PTFE, FEP, ETFE, PFA,
borosilicate glass, platinum/iridium.
Piccolo 1
● GL 28 screwthread. 360 º swivel head
● Glass dispensing tip
Piccolo 2
● As for Piccolo 1
● Switchable head for choice between two volumes
Not suited, among other chemicals, for fuming acids and carbon disulphide
MODEL
PICCOLO 1
PICCOLO 2
CAPACITY ml
100
250
500
1000
100/250
500/1000
1000/2000
CATALOGUE #
1610501
1610503
1610504
1610506
1611503
1611506
1611508
brewer's flask
General usage:
Determination of malts in the analysis of brewer's extracts
Material:
Boro-silicate glass
Features:
●
●
●
●
Modifications:
Ground neck of choice
Accessories:
● Rubber bung
● Glass or plastic stopper for ground neck
● Cleaning brush
CAPACITY ml
500
CATALOGUE #
241114
Straight neck
Beaded rim
Modified volumetric flask
Marks at 500ml and 515ml
brushes
General usage:
Cleaning laboratory ware
Material:
Nylon bristles on twisted galvanised wire
TYPE
Beaker/bottle
Beaker/bottle, black
Beaker/bottle, red
Beaker/bottle, blue
Beaker/bottle, green
Beaker/bottle, yellow
Burette
Swivel head for flasks
Test tube
BRUSH SIZE mm
50 x 135
50 x 140
50 x 140
50 x 140
50 x 140
50 x 140
12 x 90
45 x 330
15 x 90
CATALOGUE #
08086301
08020200
08020202
08020203
08020204
08020205
08086304
1B17068
08072950
564
buchner flasks
Alternate names:
Filter flasks, suction flask, vacuum flask
General usage:
Vacuum filtration and drawing off liquids. Used usually in conjunction with a Buchner funnel or filter (Gooch) crucible
Material:
Heavy duty boro-silicate glass = Guko - EPDM rubber
Features:
●
●
●
●
Modifications:
● Keck tubing connector assembly
● Screwthread tubing connector
● Side-arm socket
Accessories:
●
●
●
●
●
●
●
●
CAPACITY ml
100
250
500
1000
2000
3000
5000
NECK mm & GUKO
24 - 2 or 3
36 - 4 or 5
36 - 4 or 5
45 - 5
60 - 6 or 7
60 - 6 or 7
70 - 7 or 8
CATALOGUE #
052120124
052120136
052120144
052120154
052120163
052119168
052119173
SIZE mm
No. 2 16
No. 3 22
No. 4 27
No. 5 33
No. 6 43
No. 7 52
No. 8 61
CATALOGUE #
082920217
082920223
082920227
082920232
082920236
082920239
082920243
GUKO
x
x
x
x
x
x
x
29
36
44
53
63
73
84
Safety precaution:
Conical or bottle shape(3 & 5 litre)
Tubing connection olive
Straight neck
Beaded rim
Guko
Tubing
Suction pump
Rubber bung
Buchner funnel
FILTECH filter paper
Cleaning brush
Filter crucible
Operation:
A Buchner funnel, filter funnel with sintered disc or filter head is fitted in the flask
neck, using a guko conical rubber gasket, ensuring that the stem of the funnel
extends beyond the opening of the suction connection. Vacuum tubing is
attached to the tubing olive or connection. A vacuum is then created in the flask
by sucking air from the flask using a water jet pump or vacuum pump. Filtration is
accelerated by the suction created inside the flask.
A tubulature, screwthread tubing connector or a Keck tubing connector assembly is recommended
565
buchner funnels
General usage:
Vacuum filtration, generally with a Buchner flask
Material:
Porcelain, polypropylene, boro-silicate glass
Features:
Conical shape with a perforated base. The plastic funnel has a detachable top
Accessories:
● FILTECH filter paper
● Guko (See buchner flasks)
APPROXIMATE
CAPACITY ml
50
130
220
500
580
795
1250
4300
5800
10600
FILTER PAPER cm
4.7
7
9
11
11
12.5
15
24
27
32
INNER DIAM. mm
45
70
90
106
110
125
150
240
270
320
PORCELAIN
CATALOGUE #
07127C0a
07127C2
POLYPROPYLENE
CATALOGUE #
BORO-SILICATE
GLASS
CATALOGUE #
1K439
1K441
1K442
052134128
052134134
052134144
07127C3
07127C4
07127C4a
07127C6
07127C6a
07127C8
BUCHNER FUNNEL FILTRATION TECHNIQUES
After completion of a reaction, filtration of a mixture will often be necessary to either isolate a
solid which has separated out or remove insoluble impurities or reactants, in which case the
desired material remains in solution.
COLD SOLUTIONS
When substantial quantities of a solid are to be filtered from suspension in a liquid, a Buchner
funnel of convenient size is employed. Suction causes rapid filtration and results in a more
complete removal of the base liquid than in normal atmospheric filtration. Select a filter paper
of such size that it covers the entire perforated plate without being folded up against the sides
of the funnel (it should be slightly smaller than the plate). Moisten the filter paper with the liquid
to be filtered, place it on the perforated plate and apply the suction. The filter paper will adhere
firmly to, and completely cover, the plate of the funnel thereby preventing any solid matter from
passing underneath the filter paper and into the flask. Pour as much of the liquid into the funnel
and allow it to be filtered before transferring the residual slurry into the funnel for filtration.
This method allows quicker filtration than if the mixture had been stirred to bring more particles
into suspension and pouring it directly unto the funnel. Initial gentle suction leads to more
effective filtration than powerful suction which could cause finer particles of solid to be drawn
into the pores of the filter paper reducing the rate of filtration. After completion of a reaction,
filtration of a mixture will often be necessary to either isolate a solid which has separated out or
remove insoluble impurities or reactants, in which case the desired material remains in solution.
Any solid remaining in the reaction flask can be easily transferred to the filter funnel by rinsing
with a bit of the filtrate and stirring well to remove any solids adhering to the sides of the
reaction flask. Be sure to disconnect the pump from the Buchner flask before switching off the
pump otherwise suck back will occur and ruin any reaction products in the filtrate.
HOT SOLUTIONS
Pre-heat the Buchner funnel and use a close-grained, or glass microfibre, filter paper.
566
burettes
General usage:
Measured and accurate titration of liquids
Material:
Boro-silicate glass
Specifications:
Class A. Calibrated 0.1ml to deliver at a reference temperature of 20ºC
Features:
● Graduated volumetric tube with choice of black or white enamel graduations on standard burettes
● Stopcock with 2-2.5mm bore glass key or PTFE key or spindle valve
● Intermediate stopcock with key of choice and spindle valve on the Bang pattern micro burette
Modifications:
●
●
●
●
Schellbach strip (standard with conformity certified burettes)
Amberise
Double bore stopcock with key of choice
Lateral valve
CAPACITY ml
Standard 10
25
50
100
10
25
50
Conformity certified 25
50
Micro 2
5
With intermediate 2
stopcock (Bang pattern) 5
Dispensing (Class B) 250
500
1000
PLASTIC
Material:
GLASS KEY
CATALOGUE #
05721001211
05721002211
05721003211
05721004211
721121
721221
721321
05314170
05314175
24214G
24217G
24224G
24227G
24313G
24413G
24513G
PTFE KEY
CATALOGUE #
0561346512
0561346513
0561346515
0561346516
616512
616513
616515
05314370
05314375
24214T
24217T
24224T
24227T
24313T
24413T
24513T
SPINDLE VALVE
CATALOGUE #
05721314
05722314
05723314
05724314
05721315
05722315
05723315
24214S
24217S
24224S
24227S
24313S
24413S
24513S
PVC/PMP/FEP
CAPACITY ml
25
50
CATALOGUE #
105399
105199
TYPE
Plastic single
Plastic double
Metal, 3-point grip
Metal, 4-point grip
Retort stand
Brush
CATALOGUE #
1K139
1K140
08086303
08080352
08080302
08086304
ACCESSORIES
567
burettes - automated filling - daffert
General usage:
Measured and accurate titration of liquids with automated filling
Material:
Boro-silicate glass
Specifications:
Class A. 50ml. Calibrated 0.1ml to deliver at a reference temperature of 20ºC
Features:
● Graduated volumetric tube with choice of black or white enamel graduations
● Double bore stopcock
● Filling cut-out cup
Modifications:
● Schellbach strip
Accessories:
● Tubing
● Aspirator bottle for reservoir
Operation:
Place an aspirator bottle above the burette and attach it to the stopcock side-arm.
Attach tubing to the cup side-arm and lead it into a beaker at bench level. Turn the
stopcock so that the flow will be through the stopcock side-arm. Fill the aspirator
and open the aspirator tap. Allow the burette to fill until the liquid overflows into
the beaker. Close the burette stopcock. The liquid level will automatically be at
zero.
GLASS KEY
CATALOGUE #
2431717G
PTFE KEY
CATALOGUE #
2431717T
burettes - automated filling - digital
General usage:
Continuous titration of liquids from bottles
Material:
PTFE/PFA/ FEP and borosilicate glass
Specifications:
Conforms to DIN 12600. Accuracy <+ 0.2%. Coefficient of variation < 0.1%. Dispensing range: 0.01ml - 999.9ml.
25ml dispenses 2.5ml and 50ml dispenses 5ml
Box contents:
●
●
●
●
●
●
Burette head
Telescopic intake tube
Three adapters
Instruction manual
Conformity certificate
Two batteries
Features:
●
●
●
●
●
●
Recirculation valve
Calibration buttons
Digital display of titrated volume
360º swivel head
Adjustable titrating and intake tubes
Thread and adapter - 45 - GL 32, 38, S 40
Accessories:
● Reservoir bottle or flask
● Adapter for drying tube and filter
● GL/ground neck adapter
CAPACITY ml
25
50
CATALOGUE #
1620506
1620507
568
burettes - automated
filling, dr. schilling
laboratory
ware
General usage:
Measured and accurate titration of liquids through a directional spout and automatic filling from a reservoir
Material:
Boro-silicate glass or plastic burette and plastic auxiliary parts
Specifications:
Class B
Features:
●
●
●
●
Operation:
Fill the reservoir bottle with the titrating liquid and gently squeeze the
bottle to fill the burette. Excess liquid will drain back into the reservoir
CAPACITY ml
10
15
25
50
Graduated Schellbach volumetric tube with blue enamel graduations
Push-button release valve with directional flow spout
Discharge feeder tubing
1000ml reservoir bottle with support base
GLASS TUBE
CATALOGUE #
0572410112
72410612
0572410712
0572410312
PLASTIC TUBE
CATALOGUE #
06106399
06106499
burettes - automated filling, pellet
General usage:
Measured and accurate titration of liquids with automated filling to zero
Material:
Boro-silicate glass
Specifications:
Class A. 50ml. Calibrated 0.1ml to deliver at a reference temperature of 20ºC
Features:
●
●
●
●
●
●
Accessories:
● Tubing
● Reservoir bottle
Operation:
Insert the cone of the burette into the neck of the reservoir bottle. Attach the
tube of the filler bulb to the tubing connector. Place your thumb over the hole
above the tubing connector. Pump the ball to fill the burette. Release the
pressure to allow excess liquid to siphon back into the reservoir and set the level
in the burette to zero
For burette with intermediate stopcock:
Empty the burette by opening the intermediate stopcock
Graduated volumetric tube with black or white enamel graduations
Over flow bulb at top of tube
B29 cone at bottom of tube
Side-arm spindle valve
Optional intermediate stopcock
Tubing connector
BLOW BALL FILLER
Natural red rubber
RESERVOIR BOTTLE
Soda-lime glass
Features:
● Rubber tube
● Blow ball
● 2000ml
● B29 neck
CATALOGUE #
06200C
CATALOGUE #
0524357261
Material:
● Release valve
569
burners
General usage:
Heating apparatus in the laboratory
BUNSEN
Material:
Aluminium, brass and steel
Features:
●
●
●
●
Accessories:
Tubing
SPIRIT
Material:
Soda-lime glass
CATALOGUE #
08086100
Powder coated base
Flame tube
Hose connection
Flame-adjust swivel
Features:
● Container
● Polypropylene cap
● Porcelain wick holder
Accessories:
● Spirit fuel
● Spare wicks
CATALOGUE #
08086200
caps
burettes
- culture
- automated
vessels filling, pellet
General usage:
Closing culture bottles
Material:
Boro-silicate glass
Features:
● Dimpled top
● 33mm diameter neck
● Collar
laboratory ware
CATALOGUE #
2144118
caps - push-on
General usage:
Closing rimless culture bottles, tubes and flasks
Material:
Blue anodised aluminium
Features:
● Inner spring grip
● 38mm diameter
KAPSENBERG CAPS
Material:
Features:
Aluminium
● Inner spring grip
● 16 and 18mm diameter
● Finger grip
SIZE mm
16
18
CATALOGUE #
082901324
CATALOGUE #
082901009
082901011
● Release valve
570
caps - screw-on
General usage:
Closing laboratory bottles and screw thread tubes
Material:
Red - ETFE, others - polypropylene
Accessories:
Silicone rubber seals
THREAD
COLOUR
Blue
Red
White
Yellow
Green
Grey
Red with hole
GL14
CATALOGUE #
GL18
CATALOGUE #
082924008
082923913
082924011
082922705
082922706
SEALS
SIZE/HOLE mm
12/6
16/6
22/8
29/10
29/12
42/26
CATALOGUE #
082924605
082924606
082924609
082924608
082924610
GL25
CATALOGUE #
082923913
082924013
GL32
CATALOGUE #
082923919
082924019
082933919
082922709
082922708
GL45
CATALOGUE #
082923928
082924028
082933920
0829338280
0829338286
0829338288
082922710
WITH HOLE
CATALOGUE #
082923406
082923506
082923708
082923610
082923612
082923826
DG SAFETY WASTE CAPS
Specific usage:
Safely collecting liquid laboratory waste
Features:
● Drip-free collection of aggressive liquids
● Free rotation to enable container change
● Available with 1, 2 or 3 ports
Accessories:
● Charcoal filters to prevent gas emissions
● Stopcock to prevent tube drainage and air trapping
● Thread adapters
CATALOGUE #
1168401
1168402
1168413
Also available for ground neck vessels
TAMPER-EVIDENT SCREWCAP
Specific usage:
Safely close bottles and easily identify any tampering
CATALOGUE #
1017526
Material:
Polypropylene
Features:
● Can be used with all laboratory bottles having a GL45 thread
● Autoclavable and temperature resistant up to +140°C
Operation:
The cap is screwed tightly onto the bottle and after a soft 'click' the plastic ring
is fixed on the bottle neck. When the cap is opened for the first time, the
perforation of the plastic ring is broken thus showing that the bottle has been
opened
Pack size:
10
After the perforation of the plastic ring is broker, the cap may of course still be
used as and "ordinary" screw cap
571
capsules
General usage:
Ashing of samples
ROUND
Material:
Silica
RECTANGULAR
SIZE
48 x
54 x
69 x
56 x
78 x
75 x
87 x
60 x
68 x
52 x
78 x
mm
15
15
15
28
18
28
28
28 x
39 x
42 x
56 x
12
12
18
28
CATALOGUE #
2016
2017
2018
2019
2021
2022
2023
2024
2025
2026
2027
centrifuge tubes
Material:
Boro-silicate glass
Specifications:
DIN 58970 (Part 2) for a maximum acceleration of 4000pm and contents with a maximum density of 1.2g/ml
Features:
● Rimless
● Flame polished edge
CAPACITY ml
6
12
25
50
70
80
80
250
ROUND BOTTOM
Material:
ROUND BOTTOM
CATALOGUE #
052160110
052160111
052160114
052160117
ZGT101
052160124
052160126
CONICAL BOTTOM
CATALOGUE #
052426309
052161114
052161117
052160136
Polypropylene
Features:
Lipped rim
CAPACITY ml
7
16
31
48
70
110
SIZE mm
100x12
100x18
95x24
100x30
100x35
120x40
CATALOGUE #
1K302
1K303
1K305
1K306
1K307
1K308
SIZE mm
108x16
120x18
CATALOGUE #
1K300
1K301
CONICAL BOTTOM
POLYPROPYLENE
CAPACITY ml
10
15
POLYPROPYLENE
GRADUATED
CATALOGUE #
1K2300
1K2302
PMP (TPX)
GRADUATED
CATALOGUE #
1K1387
1K1388
572
ceran heating plate
Usage:
On a quadruped for protection, even distribution of heat and avoidance of soot
A better alternative to gauze wire supports with problem-free cleaning
Material:
● Plate: Glass ceramic
● Holder & quadruped: Chrome/nickel steel
Specifications:
● Application range from -200 ºC to +700ºC
● Extremely low expansion
● Very resistant to thermal shock
Accessories:
●
●
●
●
Plate holder
Bosshead
Quadruped.
Retort stand.
ITEM
135x135mm plate
Holder
Quadruped
CATALOGUE #
052382153
082907853
082907753
chromatography
Usage:
Liquid/solid column chromatography
Material:
Boro-silicate glass
Features:
●
●
●
●
Stopcocks with glass keys
Ground sockets and cones
Por. 0 sintered disc
24026 - GL18 screwcap
Modifications:
●
●
●
●
Alternate sockets and cones
PTFE-key stopcock
Built in 250ml reservoir
Spindle valve
Accessories:
●
●
●
●
Tamping rod
Flask or bottle for spray head
Solvents
Packing adsorbents, i.e. aluminium oxide
● Dropping funnels can be used as solvent reservoirs
TYPE
30ml, P1 filter disc
Socket & cone
Stopcock and socket
Stopcock, sock and cone
Adjustable spray head
Column holder
CATALOGUE #
24030
24031
24032
24033
24026
18202
573
claisen flasks
Usage:
Distillation apparatus assemblies
Material:
Boro-silicate glass
Features:
● Pear shape
● Two vertical B14 sockets for thermometers, dropping funnels etc.
● B14 side cone for condenser, receiver etc.
Modifications:
Alternate sockets and cone
CODE
MD3/25
MD3/50
MD3/100
CAPACITY ml
25
50
100
CATALOGUE #
2419914
2419917
2419924
claisen-vigreux flasks
Usage:
Distillation fractionating apparatus assemblies
Material:
Boro-silicate glass
Features:
●
●
●
●
Modifications:
Alternate size sockets and cone
CODE
MD4/25
MD4/50
MD4/100
Pear shape
Two vertical B14 sockets for thermometers, dropping funnels etc.
Built-in fractionating column
B14side cone for condenser, receiver etc.
CAPACITY ml
25
50
100
CATALOGUE #
2420114
2420117
2420124
574
clamps and clips
Usage:
Clamping and holding of laboratory apparatus
Material:
Stainless steel
BALLCUP CLAMP
Features:
● Tightening screw
● Spring loaded
SIZE NS mm
13
19
29
35
EXPANDING RETORT CLAMPS
Features:
● Thumb screw
● Cork- or plastic-lined jaws
Accessories:
CATALOGUE #
2863330
2863334
2863338
2863342
CATALOGUE #
3-JAW 08080350
4-JAW 08080315
● Bosshead (required)
QUICK RELEASE FLAT-FLANGE CLAMP
Features:
● Screw fastening
● Release lever
● Three retaining clips
SIZE mm
60
100
CATALOGUE #
082907134
082907146
TUBING CLAMPS:
HOFFMAN
Features:
MAXIMUM TUBING
DIAMETER mm
22
HOFFMAN
CATALOGUE #
08086902
MAXIMUM TUBING
DIAMETER mm
22
MOHR
CATALOGUE #
86910
MOHR
Features:
● Thumb screw clamp
● Hinged bottom bar
● Squeeze to open
● Spring-loaded
575
clamps and clips for glass joints
Usage:
Clamping and holding of laboratory apparatus
Material:
POM
KECK for conical joints
Operation:
Locate the wide end of the clip with the wide end of the joint and snap the clip over the cone and socket to hold them together
COLOUR
SET
Turquoise
Violet
Yellow
Blue
Green
Red
Orange
Yellow
Brown
TO FIT JOINT
B10 to B45
B10
B12
B14
B19
B24
B29
B34
B40
B45
CATALOGUE #
062903107
062903112
062903111
062903114
062903119
062903124
062903129
062903134
062903140
062903145
TO FIT KS JOINT
13/2
19/9
29/12
35/20
CATALOGUE #
2863405
2863406
2863408
2863409
KECK for spherical joints
COLOUR
Violet
Light blue
Dark red
Orange
clevenger trap
Usage:
Distillation apparatus assemblies
Material:
Boro-silicate glass
Features:
●
●
●
●
Modifications:
● Stopcock with PTFE-key
● Spindle valve
● Screwthread tubing connectors.
Accessories:
● Tubing
● Keck clips
CATALOGUE #
24243
Built-in Liebig condenser
Standard 9mm tubing olives
Glass-key stopcocks
Ground cones and sockets of choice
576
cold traps
General usage:
Trapping of condensation and prevention of it escaping into the system
Material:
Boro-silicate glass
VACUUM TRAP
Specific usage:
In vacuum apparatus assemblies to prevent entrainment of volatile materials from damaging pumps etc. Usually used in a train
Features:
Ground sockets of choice. Jacketed conical tube
Operation:
Load the vessel with a suitable refrigerant such as dry ice.
Volatile materials passing through the assembly freeze onto the cold surface
Accessories:
º
● 90 bend
● U-bend with spindle valve to easily drain off contaminants
CONDENSATION TRAP
Features:
CATALOGUE #
24069
● Bulb containing hook shaped tube
● Ground cone of choice
CATALOGUE #
24070
IMMERSION TRAP
Specific usage:
In vacuum apparatus assemblies to prevent corrosive vapours etc.
May also be used as an absorption trap Kjeldahl digestions from damaging pumps
CATALOGUE #
24071
Features:
● Tube
● Ground cone and socket of choice
Operation:
Immerse the trap into a Dewar vessel containing a suitable refrigerent such as dry ice. Volatile materials passing through the assembly
freeze onto the cold surface
577
combustion boats
General usage:
Combustion and weighing of dry samples
Material:
Porcelain and silica
Features:
● Finger grips
PORCELAIN
LENGTH mm
72
90
100
130
WIDTH mm
11
12
12
20
258
306
307
309
SILICA
LENGTH mm
50
78
103
WIDTH mm
9
11
12
CATALOGUE #
72375
72380
72382
CATALOGUE #
combustion tube
General usage:
Combustion of small amounts of solids. Can also be used as a drying
tube or screwthread connector in apparatus assemblies
Material:
Boro-silicate glass
Features:
● Screwcap with hole
● Threaded ends
Keep direct heat way from caps. Avoid temperatures above 500ºC as glass could distort
LENGTH mm
230
DIAMETER mm
22
CATALOGUE #
24193
condensers - coil
General usage:
Reflux or distillation applications in apparatus assemblies
Material:
Boro-silicate glass
Features:
● Two 9mm tubing olives
● Ground cone and optional socket
Modifications:
● Alternate effective lengths to suit requirements.
● Alternate screwthread tubing connection with connector for safety and convenience
● Alternate size sockets and cones.
COIL-DISTILLATE
Specific features:
● Distillate coil
● Coolant jacket
● Equal size joints
CODE
JOINT/S
2425371
2425372
B24
B29
EFFECTIVE
LENGTH mm
300
300
CATALOGUE #
2425305
2425306
578
condensers - coil
DALIN
Specific features:
●
●
●
●
Coolant coil
Distillate column
Flooding protector
Equal size joints
Operation:
The bypass prevents flooding in the condenser
CODE
JOINT/S
QC-4080
B24
DIMROTH
Specific usage:
For dry ice or solid coolants
EFFECTIVE
LENGTH mm
300
CATALOGUE #
2426405
Specific features:
●
●
●
●
Modifications:
Water connectors can be optionally placed on the same side or opposite each other
CODE
JOINT/S
2425461
2425471
2425472
2425482
B14
B24
B29
B29
ETHER
Specific usage:
For dry ice or solid coolants. Condensing very volatile liquids
Coolant coil
Distillate column
Water inlet and outlet both at the top
Equal size joints
EFFECTIVE
LENGTH mm
160
250
250
400
CATALOGUE #
2425403
2425405
2425406
2425506
Specific features:
●
●
●
●
Operation:
The main cooling surface area is jacketed by a Liebig type condenser, that is cooled by a
separate water supply, preventing vapour from creeping around the outside of the coil.
CODE
JOINT/S
C11/23
B24 cone & B19 socket
Inner coolant coil
Outer coolant jacket
Distillate column
Four hose connectors.
EFFECTIVE
LENGTH mm
165
CATALOGUE #
2426354
579
condensers - coil
GRAHAM
Specific features:
● Coolant coil
● Distillate column
● Equal size joints
Operation:
The internal coils give an increased cooling surface
CODE
JOINT/S
C3/12
C3/13
C3/14
C3/22
C3/23
C3/24
B19
B24
B29
B19
B24
B29
JACKETED COIL
Specific features:
●
●
●
●
●
EFFECTIVE
LENGTH mm
165
165
165
320
320
320
CATALOGUE #
24257104
24257105
24257106
24257204
24257205
24257206
Coolant coil
Distillate column
Outer coolant jacket
Equal size joints
Water inlet and outlet both at the top
Modifications:
Water connectors can be optionally placed on the same side or opposite each other
CODE
JOINT/S
CX6/22
CX6/33
CX6/44
B19
B24
B29
MULTI COIL
Specific features:
EFFECTIVE
LENGTH mm
160
160
160
CATALOGUE #
2425504
2425505
2425506
● Coolant coil
● Distillate column
● Equal size joints
CODE
JOINT/S
C13/55
C13/55/2
B34
B34
EFFECTIVE
LENGTH mm
230
420
CATALOGUE #
2426507
2426607
580
condensers - coil
REVERSIBLE COIL
Specific features:
● Coolant coil
● Distillate column
● Two cone joints
Operation:
The internal coils give an increased cooling surface
CODE
CONE JOINTS
CX3/23
CX3/35
B19 & B24
B24 & B34
EFFECTIVE
LENGTH mm
160
160
CATALOGUE #
2426245
2426257
THORPE (INLAND REVENUE)
Specific usage:
Testing and control methods by brewers and distillers and removing condensable vapours
from non-condensable gases
Specific features:
●
●
●
●
Modifications:
Water connectors can be optionally placed on the same side or opposite each other
Operation:
Vapour and distillate traverse down through the coil
Distillate coil
Coolant jacket
Water inlet and outlet both at the top
Equal size joints
Not recommended for fast rates of distillation
CODE
JOINT/S
C6/13
B24
TWIN COIL
Specific usage:
When maximum efficiency is required
Specific features:
●
●
●
●
CODE
JOINT/S
C4/13
B24
EFFECTIVE
LENGTH mm
205
CATALOGUE #
2425805
Two coolant coils
Separate water inlets and outlets
Distillate column
Equal size joints
EFFECTIVE
LENGTH mm
207
CATALOGUE #
2425905
581
condensers - immersion
COLD FINGER
Specific usage:
Immersion into distillation assemblies, etc.
Specific features:
● Jacketed tube
● Cone
● Water inlet and outlet
Operation:
Refluxing can be regulated by adjusting the air or water flow
through the condenser
CODE
JOINT/S
FC14/00
B24
EFFECTIVE
LENGTH mm
100
CATALOGUE #
2426104
condensers - jacketed
ALLIHN
Specific features:
● Bulb distillate chain
● Outer coolant jacket
● Equal size joints
Operation:
The internal bulbs give an increased cooling surface
CODE
JOINT/S
CX7/33
B24
DAVIES
Specific features:
●
●
●
●
EFFECTIVE
LENGTH mm
400
CATALOGUE #
2425205
Distillate column
Coolant bulb
Outer coolant jacket
Equal size joints
Operation:
The outer cooling surface prevents creep and loss of vapour with liquids that
have low boiling points
CODE
JOINT/S
C5/11
C5/12
C5/13
C5/22
C5/23
C5/24
B14
B19
B24
B19
B24
B29
DEWAR
Specific usage:
For dry ice or solid coolants
Specific features:
● Coolant chamber
● Distillate jacket
● Equal size joints
CODE
QC-5015
JOINT/S
B24
EFFECTIVE
LENGTH mm
160
160
160
200
200
200
CATALOGUE #
24256103
24256104
24256105
24256204
24256205
24256206
DEPTH mm
250
CATALOGUE #
2426605
582
condensers - jacketed
FRIEDRICH'S
Specific features:
● Inner coolant chamber
● Helical indentations
● Equal size joints
Operation:
The helical indentations inside the cooled surface promote turbulent flow with
increased heat transfer and efficiency. Creeping of vapour is avoided because
of the minimum annulus between the cooled surface and the outer jacket
CODE
JOINT/S
C10/22
B24
LIEBIG (WEST)
Specific features:
EFFECTIVE
LENGTH mm
100
CATALOGUE #
2426004
● Distillate column
● Outer coolant jacket
● Equal size joints
CODE
JOINT/S
C1/00
C1/11
C1/12
C1/13
C1/14
B10
B14
B19
B24
B29
EFFECTIVE
LENGTH mm
60
155
208
250
250
CATALOGUE #
24251001
24251103
24251204
24251305
24251405
condensers - tube
Specific features:
● Distillate column
● Equal size joints
Specific usage:
AIR
Simple condensation of substances with boiling points above 150ºC
AIR REFLUX
Reflux work with block heaters
CODE
AIR
C2/12
C2/11
FC7/23
C2/22
FC7/43
AIR REFLUX
C2/1
C2/3
JOINT/S
B19
B14
B24
B19
B24
EFFECTIVE
LENGTH mm
150
200
250
400
500
CATALOGUE #
24250154
24250203
24250255
24250404
24250505
B14
B24
150
510
24267153
24267515
583
conical measures
General usage:
Wider surface area for easier decanting from a larger vessel
Material:
Polypropylene and PMP
Features:
● Wide base for stability
● Graduated
CAPACITY ml
100
250
500
1000
GRADUATIONS ml
2
5
10
20
POLYPROPYLENE
CATALOGUE #
1K422
1K423
1K424
1K425
PMP (TPX)
CATALOGUE #
1K1422
1K1423
1K1424
1K1425
crucibles
General usage:
Melting dry chemicals, metals and minerals
Accessories:
●
●
●
●
Material:
Alsint 99.7(alumina, aluminium oxide)
Material:
CAPACITY ml
5
10
15
20
25
30
40
50
60
75
85
90
100
120
150
200
250
Tongs
Triangles
Gloves
Hot grips
CAPACITY ml
5
15
30
60
110
CATALOGUE #
0771A
0772A
0773A
0774A
0775A
MEDIUM FORM
CATALOGUE #
0779MF9
0779MF8
0779MF7
0779MF7a
TALL FORM
CATALOGUE #
Porcelain
LOW FORM
CATALOGUE #
0779000a
077900
07790
07791
07792
07792a
0779C0
0779C1
0779MF6
0779MF6a
0779MF5
0779C2
0779C3
0779C4
07793
0779MF4
0779MF3
0779C5
07794
0779MF2
0779MF1
0779MF1a
584
crucibles
General usage:
Melting dry chemicals, metals and minerals
Accessories:
●
●
●
●
●
●
Material:
Silica
Tongs
Triangles
Gloves
Hot grips
Lids
*included with 0720897 & 72031
Muffle tray for 0720897
COKING (VOLATILE)*
MUFFLE TRAY CAPACITY ml
OPEN END TRAYS 10
LOW FORM
CATALOGUE #
SWELLING
MOISTURE*
15
ROGA 20
25
30
50
80
Zirconium
Material:
Specifications:
TONGS
Material:
Features:
TALL FORM
CATALOGUE #
0720897
71331
71041
72034
72038
72101
72031
72061
72063
72065
72075
72077
Zirconium
Melting point 600ºC - 700ºC
CAPACITY ml
35
40
45
CATALOGUE #
08K567
08K516
08K452
SIZE mm
200
CATALOGUE #
08087300
Stainless steel
● Bow for easy grip
● Turned up ends
TRIANGLES
Material:
Ceramic and galvanised wire
Features:
Tube mounted on twisted wire
Accessories:
Tripod (required)
SIZE mm
PIPE CLAY 63
SILICA 50
CATALOGUE #
8086250
08S4530
585
crucibles - lids
Features:
Finger grip
TO FIT CRUCIBLE
PORCELAIN
0779MF9
0779000a, 0779C0, 0779MF8
077900, 0779C1,07 79MF7
07790, 0779C2, 0779MF7a
07791, 0779C3, 079MF6
07792, 0779C4, 0779MF5, 0779MF6a
07792A, 0779C5, 0779MF4
07793, 0779MF3, 0779MF2
07794, 0779MF1
0779MF1a
SILICA
72075
72061
72077
72063
72065
DIAM. mm
CATALOGUE #
25
30
35
40
45
50
60
70
80
90
0779D9
0779D8
0779D7
0779D7a
0779D6
0779D5
0779D4
0779D2
0779D1
0779D10
43
47
51
57
67
72076
72062
72078
72064
72066
crystalising dishes
General usage:
Crystallisation of solids. Receptacle for desiccant in desiccators
Material:
Boro-silicate glass
Features:
● Beaded rim
● Spout
CAPACITY ml
20
40
60
100
150
300
500
900
2000
CATALOGUE #
0521311240
0521311320
0521311340
0521311380
0521311410
0521311440
0521311490
0521311540
0521311590
culture bottle - breed-demeter
General usage:
Developing cultures in a growing media and storage
Material:
Boro-silicate glass
Features:
● Square
● Flanged lip on neck
Accessories:
Rubber bung (21x25x30)
Cotton wool plugs can be used for closing
CAPACITY ml
180
SIZE mm
48x148
CATALOGUE #
052148131
586
culture bottles
General usage:
Developing cultures in a growing media and storage
Material:
Boro-silicate glass
LONG NECK
Features:
Accessories:
● Straight flame-polished rim
● Choice of 16mm or 18mm neck size
Kapsenberg cap (as shown)
CAPACITY ml
50
100
200
MEDIA
Features:
Accessories:
SIZE mm
40x107
40x150
50x175
CATALOGUE #
214211
214212
214213
● Straight flame-polished rim
● Choice of 16mm, 18mm, 31mm or 38mm neck size
●
●
●
●
Kapsenberg cap
Blue anodised aluminium cap
Glass cap
Rubber bung
CAPACITY ml
FOR GLASS CAP 300
500
1000
WITH BEADED RIM 100
FOR RUBBER BUNG 300
500
FOR METAL CAP 100
300
500
SIZE mm
70x170
80x200
100x235
50x115
70x165
80x200
50x125
70x170
80x208
CATALOGUE #
214313
214314
214315
214512
214513
214514
217732
217733
217734
587
culture flasks
General usage:
Culture preparations when a large, flat bottom surface is required for growing cultures to a uniform thickness
Material:
Boro-silicate glass
ERLENMEYER-TYPE
Features:
Accessories:
CAPACITY ml
50
100
250
500
1000
2000
FERNBACH
Features:
● Straight flame-polished rim
● 38mm wide neck size for blue anodised aluminium cap
● Choice of 16mm or18mm narrow neck size for Kapsenberg cap
● Kapsenberg cap
● Blue anodised aluminium cap
● Rubber bung
WIDE NECK
CATALOGUE #
217712
217712
217713
217714
217715
217716
NARROW NECK
CATALOGUE #
214911
214912
● Straight flame-polished rim
● 38mm wide neck size for blue anodised aluminium cap
Accessories:
● Blue anodised aluminium cap
● Rubber bung
CAPACITY ml
1800
SIZE mm
200 x 175
CATALOGUE #
052177462
culture tubes
General usage:
Culture preparations and storage
Material:
Boro-silicate glass
Features:
● Straight rim for Kapsenburg cap
● crew thread for screwcap
Accessories:
● Kapsenburg cap
● Red screwcap
● Rubber bung
CAPACITY ml
10
12
20
25
DIAM. x LENGTH mm
12 x 100
16 x 100
16 x 160
18 x 180
SCREW THREAD
CATALOGUE #
0526135115
0523175145
0526135215
0526135235
STRAIGHT RIM
CATALOGUE #
052613221
052613223
588
culture tubes - single use
General usage:
Culture preparations and storage
Material:
Soda-lime glass
Features:
● Screw thread
● Black screwcap
Pack size:
100
SINGLE USE
Material:
Polystyrene
Features:
Pack size:
● Screw thread
● Screwcap
● The 15ml has a flat base
100
CAPACITY ml
10
12
20
25
DIAM. x LENGTH mm
12 x 100
16 x 100
16 x 160
18 x 180
CATALOGUE #
0523175115
0523175145
0523175215
0523175235
CAPACITY ml
10
15
DIAM. x LENGTH mm
13 x 90
17 x 120
CATALOGUE #
06Z10PSNL
06Z5PSNL
SIZE mm
11.85 x 50.8
11.9 x 34.5
18.65/11.25 x 22.8
18.65/11.25 x 22.8
CATALOGUE #
1K2618
1K2630
1K2631
1K82631
cuvettes
General usage:
Holding samples for spectroscopic experiments
Material:
Polystyrene
Features:
For single use
Pack size:
TYPE
For Olli-C-Analyser®
For Fibrintimer®
For Amelung®
589
desiccators - glass
Alternate names:
Drying chamber
General usage:
Cooling of heated substances and for the storage of dry substances that must not be exposed to the moisture normally present in the
atmosphere
Material:
Boro-silicate glass and soda-lime glass
Features:
● Base with flat flange
● Lid with matching flat flange
● Choice of glass or PTFE key or spindle valve stopcock in the lid of the
vacuum desiccator
Accessories:
●
●
●
●
Porcelain, plastic or metal perforated desiccator plate
Crystalising dish to hold desiccant
High vacuum grease for sealing the lid to the base
Desiccant
Suggested: silica gel orange, calcium chloride anhydrous and phosphorous
pentoxide
Operation:
A desiccator is an airtight container which maintains an atmosphere of low humidity through the use of a suitable drying agent which
occupies the bottom part of the desiccator. An ignited crucible or other very hot object should be cooled for about one minute before
being placed into the desiccator on a perforated plate. In either case, the lid of the desiccator should be slightly ajar for 30 seconds
prior to complete closing. This will prevent a partial vacuum from forming as the heated air cools. If such a vacuum forms it might
become very difficult to remove the lid without upsetting the samples within. A dried sample should remain in the desiccator for at least
5 minutes before being weighed. If the sample is to remain in the desiccator for an extended period of time before weighing, the top of the
weighing bottle of the lid of the vial should be put in place after 10 minutes of cooling. An airtight seal is maintained by applying a small
amount of silicone grease to the flanged surfaces where the lid and body of the desiccator meet. Once the desiccant has been added,
the lid to the desiccator should not be removed any more than is necessary
Drying agents should not be placed directly in the desiccator but rather in a crystalising dish
SIZE mm
100
150
200
250
300
SPARE STOPCOCKS
PLATE mm
90
140
190
240
280
Straight shank glass key
Straight shank PTFE key
B24 cone glass key
B24 cone PTFE key
B24 spindle valve
SODA-LIME GLASS
PLAIN
CATALOGUE #
05596111
05596112
05596113
05596114
05596115
VACUUM
CATALOGUE #
05596311
05596312
05596313
05596314
05596315
BORO-SILICATE GLASS
PLAIN
CATALOGUE #
2478146
2478157
2478161
2478166
2478169
VACUUM
CATALOGUE #
2478246
2478257
2478261
2478266
2478269
24149G
24149T
241495G
241495T
2479904
590
desiccators - plastic
Alternate names:
Drying chamber
General usage:
Cooling of heated substances and for the storage of dry substances that must not be exposed to the moisture normally present in the
atmosphere
Material:
Polycarbonate and polypropylene
Features:
●
●
●
●
Base with flat flange
Lid with matching flat flange
PTFE stopcock in the lid of the vacuum desiccator
Polypropylene perforated desiccator plate
Accessories:
●
●
●
●
Crystalising dish to hold desiccant
High vacuum grease for sealing the lid to the base
Desiccant
Suggested: silica gel orange, anhydrous calcium chloride, phosphorous pentoxide
Operation:
See previous page
LARGE INTERIOR VOLUME -- The space saving design of the desiccator dome provides maximum interior clearances. They provide
an average of 13% greater interior volume than standard hemispherical domes. EXTRA HEAVY WALLS -- Clear polycarbonate top and
white polypropylene or polycarbonate
SIZE mm
150
200
240
250
PLAIN
CATALOGUE #
1B42030
1B42031
1B42032
VACUUM
CATALOGUE #
1B42010
1B42020
1B42025
1K554
VACUUM*
CATALOGUE #
1B42012
1B42022
1B42027
desiccators - plates
General usage:
Supporting samples in desiccators
Features:
● Perforated
● The porcelain and plastic plates have a centre finger hole for lifting
DESICCATOR SIZE
100
150
200
230
250
300
POLYPROPYLENE
CATALOGUE #
1K551
1K231
08802-31
1K553
PORCELAIN
CATALOGUE #
07119C1
07119C2
07119C3
METAL
CATALOGUE #
082908046
082908057
082908061
07119C4
07119C5
082908066
082908069
591
digestion tubes
General usage:
To suit different applications and manual/automatic handling systems
Material:
Boro-silicate glass
Features:
The Bruker and Rangmat have flat bottoms and in addition the Rangmat bottom is concave
CAPACITY ml
PLAIN 15
75
100
250
350
KJELDAHL 75
100
250
BÜCHI 350
BRUKER 250
RANGMAT 50
DIAM. x LENGTH mm
16 x 145
26 x 255
26 x 300
42 x 300
46 x 296
260x 255
26 x 300
42 x 300
48 x 255
30 x 179
26 x 143
CATALOGUE #
2416209
2416221
2416224
2416236
2416239
2416421
2416424
2416436
2404739
2404836
24095
dissolution vessel
Specific usage:
Tablet dissolution in a dissolution bath in the pharmaceutical industry
Material:
Boro-silicate glass
Features:
16mm flat flange
Modifications:
Amberisation
CAPACITY ml
1000
DIAMETER mm
100
CATALOGUE #
279701
592
distilling flasks
General usage:
Distillation applications
Material:
Boro-silicate glass
Features:
●
●
●
●
Modifications:
● Ground socket on neck
● Ground cone on side arm
Round bottom
Long neck
Side arm
Beaded rim
CAPACITY ml
100
250
500
1000
ENGLER - ASTM 125
NECK mm
22
34
34
34
17
CATALOGUE #
2124324
2124336
2124344
2124354
052165328
distilling receivers
General usage:
Distillation apparatus assemblies
Specific usage:
24248: Determination of water content in petroleum products with solvent entrainers that are lighter than water
24241: Determination of water content in petroleum products with solvent entrainers that are heavier than water and for estimation of oil
content
24247: Vacuum distillation where it is desirable to change flasks without disturbing the vacuum within the system
Material:
Boro-silicate glass
Features:
● Ground cones and sockets - choice of sizes
● Glass key stopcocks
● Standard 9mm tubing olives on 24247
Modifications:
● PTFE-key stopcock
● Spindle valve
● Screwthread tubing connectors
Bidwell-Sterling
Dean and Stark, light entrainer with stopcock
Heavy entrainer
Heavy entrainer with stopcock and thermo socket
Modified Bidwell-Sterling with solvent return tube
Dean and Stark with stopcock and return tube
Perkin
CATALOGUE #
24239
24248
24241
24244
24240
24249
24247
593
distribution chamber
Alternate names:
Vacuum receiver
General usage:
Connection of four flasks to a condenser outlet under vacuum in an assembly
Material:
Boro-silicate glass
Features:
● B19 and four x B14 joints ground cones and sockets
● Standard 9mm tubing olive
Modifications:
● Alternate socket and cones
● Screwthread tubing connector
Accessories:
● Delivery adapter as shown
● Flasks
Operation:
Rotate the delivery adapter to empty into different limbs thus filling the receiver flasks without interruption
CATALOGUE #
2423643
dropping bottles
General usage:
Storage and dispensing of small amounts of liquids
Material:
Soda-lime glass
Features:
●
●
●
●
●
CAPACITY ml
30
50
100
125
Ground neck socket
Dropping pipette with ground cone
Rubber teat
Screwthread neck on 05600198
Rubber teat in screwcap on 05600198
CLEAR
CATALOGUE #
AMBER
CATALOGUE #
0523270170
0523270240
0523270176
0523270246
AMBER OVAL
CATALOGUE #
05600198
POLYSTOPPER
CATALOGUE #
604003
604006
604125
Material:
Polyethylene
Features:
● Screw cap with dropper insert
● Dropping pipette with rubber teat
CAPACITY ml
50
100
RANVIER TYPE
50
100
250
500
1000
CATALOGUE #
0694587
0694687
1K388
1K389
1K391
1K392
1K393
594
dropping funnels
General usage:
Addition of measured amounts of liquid at a set rate. Solvent reservoir in chromatography. Can also be used as a separating funnel
Material:
Boro-silicate glass
Features:
● Ground cones and sockets
● Glass key stopcocks
● Glass stopper with vent hole
Modifications:
●
●
●
●
Accessories:
● Plastic stopper
● Cleaning brush
CAPACITY ml
50
100
250
500
1000
2000
SOCKET & CONE
B14
B14
B29
B29
B29
B29
Alternate socket and cone sizes
Open top
Without ground cone
Spindle valve
GLASS KEY
CATALOGUE #
052412417G
052412424G
052412436G
052412444G
052412454G
052412463G
PTFE KEY
CATALOGUE #
052412417T
052412424T
052412436T
052412444T
052412454T
052412463T
drying towers
General usage:
Drying of gasses
Material:
Boro-silicate glass
Features:
●
●
●
●
Modifications:
● Alternate ground socket size
● B14 bottom socket on Type A
● Screwthread tubing connectors on Type B
Accessories:
● Plastic stopper
● B34 glass stopper with vent hole
● Cleaning brush
Column on base
Base outlet of choice
Standard 9mm tubing olives on Type B
Height 250mm
Type A
Type B
B34 tubing adapter
B34 stopcock adapter
B14 stopcock adapter
CATALOGUE #
24038A
24038B
242127
242167
242163
595
drying tubes
General usage:
Drying of gasses by passing over a desiccant
Material:
Boro-silicate glass
Features:
●
●
●
●
Modifications:
● Alternate sockets and cones
● Glass key stopcocks on 24187
● Alternate screwthread connectors on 24187
Accessories:
● Desiccant, i.e. sodium chloride
Ground cones on straight tubes
Ground sockets on U tubes
Effective length of 100mm
Side arms on 24187
Angled with B14 cone
Angled with B19 cone
Angled with B24 cone
Straight with B14 cone
Straight with B19 cone
Straight with B24 cone
U with B14 sockets
U with B19 sockets
U with B24 sockets
U with sidearms
CATALOGUE #
241603
241604
241605
241613
241614
241615
241863
241864
241865
24187
596
erlenmeyer flasks - glass
Alternate names:
Conical flasks
General usage:
Boiling and swirling of liquids. Receiving components in apparatus assemblies. Can also be used as culture flasks
Material:
Boro-silicate glass
Features:
●
●
●
●
Modifications:
Retaining hooks and springs on 24193 series
Accessories:
●
●
●
●
●
Operation:
The conical shape greatly reduces the tendency for precipitates to stick to the inside surface as they slide down the wall
NARROW NECK
CAPACITY ml
25
50
100
250
300
500
1000
2000
5000
NECK SIZE mm
22
22
22
34
34
34
42
50
51
CATALOGUE #
0521216140
0521216170
0521216240
0521216360
0521216390
0521216440
0521216540
0521216630
0521216730
GROUND NECK
CAPACITY ml
25
50
50
50
100
100
100
100
250
250
250
500
500
500
1000
1000
1000
1000
2000
2000
2000
NECK SIZE mm
B14
B14
B19
B24
B14
B19
B24
B29
B19
B24
B29
B24
B29
B34
B24
B29
B34
B45
B29
B34
B45
CATALOGUE #
2419312
2419313
2419314
2419315
2419323
2419324
2419326
2419327
2419334
2419336
2419337
2419344
2419346
2419347
2419353
2419354
2419355
2419357
2419363
2419367
2419368
White enamel graduations
Lipped rim
Ground neck on 24193 series
Screwthread neck on 24118 series
Magnetic stirrer bar
Plastic or glass stopper for ground neck
Rubber bung
Red screwcap for 24118 series
Cleaning brush
WIDE NECK
NECK SIZE mm
31
34
34
50
CATALOGUE #
0521226140
0521226170
0521226240
0521226360
50
50
72
0521226440
0521226540
0521226630
SCREWTHREAD NECK
NECK SIZE mm
CATALOGUE #
GL18
24118172
GL25
24118243
GL32
24118364
GL32
24118444
GL32
24118544
GL32
24118634
597
erlenmeyer flasks - plastic
Alternate names:
Conical flasks
General usage:
Boiling and swirling of liquids. Receiving components in apparatus assemblies. Can also be used as culture flasks
Material:
Polypropylene and PMP(TPX))
Features:
●
●
●
●
Accessories:
● Plastic stopper as alternate to screwcap
● Rubber bung for 1K146 series and as alternate to screwcap
● Cleaning brush
CAPACITY ml
50
100
125
250
500
1000
2000
Red enamel graduations on polypropylene flasks
Blue enamel graduations on PMP(TPX)) flasks
Straight neck on 1K146 series
Screwcap on 0666 series
POLYPROPYLENE
Threaded neck
CATALOGUE #
POLYPROPYLENE
Straight neck
CATALOGUE #
1K1460
06667941
06668941
06669941
PMP (TPX)
CATALOGUE #
0666795
1K1461
1K1462
1K1463
1K1464
1K1465
0666895
0666995
evaporating dishes
General usage:
Evaporating of liquids
Material:
Boro-silicate glass, polypropylene, porcelain and silica
Features:
● Beaded rim
● Spout
CAPACITY ml
GLASS 15
45
60
90
170
PLASTIC 175
DIAMETER mm
80
90
100
110
130
150
FLAT FORM
CATALOGUE #
078884
RIM DIAM. Mm
50
60
70
80
95
100
PORCELAIN
ROUND BOTTOM
CATALOGUE #
1090
1091
1092
1094
1065
1096
CATALOGUE #
0521301320
0521301340
0521301380
0521301410
0521301440
40925
SILICA
FLAT FORM
CATALOGUE #
2011
2013
2014
598
extraction flask
Alternate names:
Mojonnier flask
General usage:
Extraction of fat from milk and milk products
Material:
Boro-silicate glass
Features:
Beaded rim
Accessories:
Rubber bung
SIZE mm
160x34
CATALOGUE #
24277
extraction tube
General usage:
In the mining industry.
Material:
Boro-silicate glass
Features:
● Capillary extrusion at top
● Round bottom
CATALOGUE #
24159
extractors - liquid/liquid
General usage:
Solvent extraction in liquid/liquid separation processes
Material:
Boro-silicate glass
Features:
● Ground cone and socket
● Distributor that fits inside the extractor body
Modifications:
● Alternate size cone and socket
● Retaining hooks and springs
Accessories:
● Keck retaining clips
BAFFLE DISC TYPE
Specific usage:
Continuous operation for volumes of 10ml to 500ml.
Operation:
Condensed solvent falls onto the baffles and is broken into small droplets which are distributed through the liquid sample and extract
the desired components and/or contamination. The solvent then returns to the boiling flask by way of the tube on the side of the
extractor
CODE
EX10/23
EX10/20
CAPACITY ml
60
Distributor
SOCKET & CONE
B45 & B24
-
CATALOGUE #
2414023
24143
599
extractors - liquid/liquid
General usage:
Solvent extraction in liquid/liquid separation processes
Material:
Boro-silicate glass
Features:
● Ground cone and socket
● Distributor that fits inside the extractor body
Modifications:
● Alternate size cone and socket
● Retaining hooks and springs
Accessories:
Keck retaining clips
LIGHT PHASE
Specific usage:
Continuous operation light phase extraction for volumes of 10ml to 500ml
CODE
EX8/25
EX8/20S
EX9/33
EX9/30S
CAPACITY ml
100
Distributor
200
Distributor
HEAVY PHASE
Specific usage:
Continuous operation heavy phase extraction for volumes of 500ml to 2500ml
CODE
EX10/53
EX12/33S
CAPACITY ml
400
Distributor
SOCKET & CONE
B34
B34 & B24
SOCKET & CONE
B34
B24 & B34
CATALOGUE #
2414125
24136
2414133
24137
CATALOGUE #
24142415
24138
extractors - liquid/solid
General usage:
Solvent extraction in liquid/solid separation processes
Material:
Boro-silicate glass
Features:
● Ground cone and socket
● Separate distributor support inside the extractor body
Modifications:
● Alternate size cone and socket
● Retaining hooks and springs
Accessories:
● Keck retaining clips
● Thimbles
CODE
EX7/13
FC8/23
EX13
CAPACITY ml
60
200
Distributor support
SOCKET & CONE
B34 & B24
B34 & B24
CATALOGUE #
2413013
2413023
24146
600
extractors - liquid/solid
General usage:
Solvent extraction in liquid/solid separation processes
Material:
Boro-silicate glass
Features:
● Ground socket and cone with drip tip
● Inner liner with integral siphon tube
Modifications:
● Alternate size cone
● Retaining hooks and springs
Accessories:
● Keck retaining clips
CODE
EX7/13
EX7/10
EX7/23
EX7/20
EX7/33
EX7/30
CAPACITY ml
20
Liner
50
Liner
100
Liner
SOCKET & CONE
B34 & B24
B45 & B24
B55 & B24
CATALOGUE #
2412913
241321
2412923
241322
24129245
2413230
extractors - soxhlet, liquid/solid
General usage:
Soxhlet solvent extraction in liquid/solid separation processes
Material:
Boro-silicate glass
Features:
● Ground cone and socket
● Siphoning tubes
● Flat flange body and lid with retaining clip allows
insertion of large thimbles
Modifications:
● Alternate size cone and socket
● Retaining hooks and springs
Accessories:
● Keck retaining clips
● Thimbles
CODE
EX5/21
EX5/32
EX5/43
EX5/53
EX5/55/100
EX5/63
EX5/83
CAPACITY ml
5
20
40
60
100
100
200
SOCKET & CONE
B19 & B14
B24 & B19
B29 & B24
B34 & B24
B34 & B34
B34 & B34
B50 & B24
CATALOGUE #
2413121
2413132
2413143
2413153
2413155
2413156
2413163
FLAT FLANGE TYPE
CODE
EX5/75
DA5/75
EX5/105
DA5/100
CAPACITY ml
600
Lid
2000
Lid
FLANGE & JOINTS
60 & B34
60
100 & B34
100
CATALOGUE #
2413375
2413575
24133105
24135100
601
extractors - thimbles
General usage:
In soxhlet extractors in liquid/solid extraction processes
Material:
Cellulose fibre
Pack size:
25
CAPACITY ml
6
20
40
60
100
200
600
2000
THIMBLE SIZE mm
10 x 50
18 x 65
22 x 80
28 x 80
28 x 120
41 x 123
60 X 160
90 X 290
CATALOGUE #
02-3000-025
eye-wash station
General usage:
Emergency first aid
Material:
● Backboard - green polystyrene
● Bottle - polyethylene
Features:
● Backboard: Wall mountable with recess to hold an eyewash bottle. Directions are clearly printed on the backboard
● Bottle: Eye cup with snap on cap. Head with an air vent valve. Perforated spray plate. Drain tube
Operation:
The bottle is ergonomically designed to allow quick and immediate flushing to remove foreign matter and prevent serious eye damage.
It can be filled with distilled water or any certified eyewash solution. The air vent in the head assures air refill of free space in the bottle
thus preventing draw back of contaminated wash into the bottle. The perforated spray plate in the cup centre breaks up the stream to
give the eye a gentle wash. A drain tube releases waste
ITEM
Station
Bottle
CATALOGUE #
1K2386
1K383
fermentation tubes
General usage:
Fermentation processes
Material:
Boro-silicate glass
CATALOGUE #
2 bulbs 24275
3 bulbs 24276
602
filter crucibles - glass
Alternate names:
Gooch crucible
General usage:
Applications in quantitative analysis. Precipitates that have to be dried to the constant weight
Material:
Boro-silicate glass
Features:
● Flame polished rim
● Sintered disc with porosity of choice
Operation:
After cleaning, the filter crucible quickly reaches constant weight at 110ºC, as the remaining water evaporates. After the filtration it is
placed with the moist precipitate in the hot drying cabinet at up to 150ºC where it is dried to the constant weight. Depending on the
method of determination, it can be cooled by exposure to air or in a desiccator. To calcine a precipitate the crucible is placed in a cold
oven and heated up to a maximum of 500ºC. After heating has been switched off it is allowed to cool down to about 200ºC in the oven
Accessories:
●
●
●
●
●
CAPACITY ml
10
10
10
10
10
15
15
15
15
15
30
30
30
30
30
50
50
50
50
50
60
60
60
60
60
POROSITY
P0
P1
P2
P3
P4
P0
P1
P2
P3
P4
P0
P1
P2
P3
P4
P0
P1
P2
P3
P4
P0
P1
P2
P3
P4
ADAPTERS
FOR CRUCIBLE ml
10
15
30
50
60
CATALOGUE #
2431608
2431609
2431615
2431617
2431619
Adapter
Gloves
Tongs
Rubber sealing sleeve
Hot grips
DIAMETER mm
24
24
24
24
24
26
26
26
26
26
36
36
36
36
36
56
56
56
56
56
56
56
56
56
56
DISC DIAMETER mm
20
20
20
20
20
20
20
20
20
20
30
30
30
30
30
40
40
40
40
40
40
40
40
40
40
CATALOGUE #
2406008
2406108
2406208
2406308
2406408
2406009
2406109
2406209
2406309
2406409
2406012
2406112
2406212
2406312
2406412
2406017
2406117
2406217
2406317
2406417
2406019
2406119
2406219
2406319
2406419
603
filter crucibles - ceramic
Alternate names:
Gooch crucible
General usage:
Applications in quantitative analysis.
Precipitates that have to be dried to the constant weight
Material:
Porcelain
Features:
Perforated base
Accessories:
● Tongs
● Gloves
● Lid with finger grip
● Hot grips
CAPACITY ml
20
25
35
10
17
25
DIAM. x HEIGHT mm
37 X 35
38 X 40
41 X 43
27 X 30
17 X 30
25 X 35
CATALOGUE #
0782A1
0782A2
0782A3
0782R2
0782R2a
0782R3
DIAM. mm
35
40
45
CATALOGUE #
0779D7
0779D7a
0779D6
TO FIT CRUCIBLE ml
8
15
30
50
CATALOGUE #
082920114
082920121
082920126
082920131
LIDS FOR CRUCIBLE
82R3, 841
82A1, 82A2
82A3
SLEEVES SIZE mm
26
33
41
49
filter apparatus
Alternate names:
Filter head. Screw filter
General usage:
Filtration through sintered media or filter paper
Material:
Boro-silicate glass
Features:
● Reservoir head with screwthread and white enamel graduations
● Screw-on funnel
● Two ring seals
Accessories:
● Slit sieve
● Filter disc with fused rim
● FILTECH filter paper
Operation:
To use filter paper circles insert the slit sieve into the screw-thread
and place the filter paper circle on top of it, between the two ring seals
CAPACITY ml
250
1000
ACCESSORIES POROSITY
Filter disc P1
P2
P3
P4
Slit sieve
CATALOGUE #
052472050
2472090
CATALOGUE #
052520501
052520502
052520503
052520504
082134131
604
filter funnels - conical
General usage:
Quantative analysis, preparative chemistry and sterile filtration
Material:
Boro-silicate glass
Features:
●
●
●
●
Modifications:
● Length of stem
● Ground cone on the stem
Accessories:
Guko
DIAM. & STEM mm
55
55
55
55
55
70
70
70
70
70
80
80
80
80
80
100
100
100
100
100
150
150
150
150
150
POROSITY
P0
P1
P2
P3
P4
P0
P1
P2
P3
P4
P0
P1
P2
P3
P4
P0
P1
P2
P3
P4
P0
P1
P2
P3
P4
Conical funnel
Flame polished rim
Sintered disc
Drip tip stem
DISC DIAMETER mm
25
26
27
28
29
30
30
30
30
30
30
30
30
30
30
40
40
40
40
40
60
60
60
60
60
CATALOGUE #
24051055
24051155
24051255
24051355
24051455
24051070
24051170
24051270
24051370
24051470
24051080
24051180
24051280
24051380
24051480
240510100
240511100
240512100
240513100
240514100
240510150
240511150
240512150
240513150
240514150
605
filter funnels - cylindrical
General usage:
Quantative analysis, preparative chemistry and sterile filtration
Material:
Boro-silicate glass
Accessories:
Guko
Features:
●
●
●
●
●
●
Modifications:
● Length of stem
● Ground cone on the stem
● Screwthread tubing olives
Accessories:
● Guko
● Screwthread tubing connectors
Cylindrical reservoir
Flame polished rim
Sintered disc
Drip tip stem
Integral water jacket on the jacketed funnel
Standard 9mm tubing olives on the jacketed funnel
JACKETED
Specific usage:
Filtration of liquids where a constant temperature needs to be maintained
Operation:
A temperature controlling medium is circulated through the integral jacket
CAPACITY ml
50
50
50
50
50
100
100
100
100
100
150
150
150
500
500
200
200
200
200
200
250
250
250
250
250
DIAMETER mm
50
50
50
50
50
100
100
100
100
100
150
150
150
150
150
200
200
200
200
200
250
250
250
250
250
POROSITY
P0
P1
P2
P3
P4
P0
P1
P2
P3
P4
P0
P1
P2
P3
P4
P0
P1
P2
P3
P4
P0
P1
P2
P3
P4
CATALOGUE #
24050217
24051217
24052217
24053217
24054217
24050224
24051224
24052224
24053224
24054224
24050229
24051229
24052229
24053229
24054229
24050232
24051232
24052232
24053232
24054232
24050036
24051036
24052036
24053036
24054036
JACKETED
CATALOGUE #
24040917
24041917
24042917
24043917
24044917
24040924
24041924
24042924
24043924
24044924
24040929
24041929
24042929
24043929
24044929
24040932
24041932
24042932
24043932
24044932
24040936
24041936
24042936
24043936
24044936
606
filter tubes
General usage:
Filtration apparatus assemblies for specialised filtration techniques
Material:
Boro-silicate glass
Features:
●
●
●
●
Modifications:
Screwthread tubing olives
ALLIHN
CAPACITY ml
30
30
30
30
30
100
100
100
100
100
MICRO FILTER TUBE
Specific usage:
Sintered disc or candle
Flame polished rim
Drip tip stem
Standard 9mm tubing olives
POROSITY
P0
P1
P2
P3
P4
P0
P1
P2
P3
P4
CATALOGUE #
24059013
24059113
24059213
24059313
24059413
24059024
24059124
24059224
24059324
24059424
Reactions between gasses and liquids
DIAM. x LENGTH mm
8 x 200
8 x 200
8 x 200
8 x 200
8 x 200
POROSITY
P0
P1
P2
P3
P4
CATALOGUE #
24056200
24056201
24056202
24056203
24056204
IMMERSION FILTER STICK
Specific usage:
Reverse filtration by connection to a vacuum supply to draw off supernatant liquid from a precipitate
Operation:
When the purpose of suction filtration is to recover large quantities of clear filtrate and not the solids content, reverse filtration is used.
The precipitate is allowed to settle and the above it is drawn off through an immersion filter. As there is little tendency for filter cakes to
form on the filter disc, high filtration speeds can be achieved
DIAM. x LENGTH mm
8 x 210
8 x 210
8 x 210
8 x 210
8 x 210
6 x 100
6 x 100
6 x 100
6 x 100
6 x 100
POROSITY
P0
P1
P2
P3
P4
P0
P1
P2
P3
P4
CATALOGUE #
24054100
24054101
24054102
24054103
24054104
24054210
24054211
24054212
24054213
24054214
607
filter tubes - pipe-line
Specific usage:
Connection to flexible pipe-lines for liquid and gas filtration. Pressure or suction
filtration of pharmaceutical solutions
Material:
Boro-silicate glass
Features:
● Sintered disc
● Standard 9mm tubing olives
Modifications:
● Screwthread tubing olives
FILTER DIAM. mm
30
30
30
30
30
40
40
40
40
40
POROSITY
P0
P1
P2
P3
P4
P0
P1
P2
P3
P4
CATALOGUE #
24055300
24055031
24055032
24055033
24055034
24055060
24055061
24055062
24055063
24055064
flat flange flasks
General usage:
When extra wide necks are required in apparatus assemblies
Material:
Boro-silicate glass
Features:
● Round bottom
● Wide neck
● Flat ground flange
Modifications:
● Alternate flange size
● Amberise
Accessories:
Lid
See REACTION VESSELS
CAPACITY ml
250
500
1000
2000
FLANGE BORE mm
75
75
100
100
CATALOGUE #
2411536
2411544
2411554
2411563
florentine flasks
Alternate names:
Evaporating flask. Rotary flask
General usage:
Rotary evaporators
Material:
Boro-silicate glass
Features:
● Ground neck socket
Modifications:
● Alternate ground neck socket size
● Amberise
● Retaining hooks and springs
CAPACITY ml
100
250
500
1000
2000
SOCKET mm
B24
B24
B24
B29
B29
CATALOGUE #
24120245
24120365
24120445
24120546
24120636
608
forceps
Alternate names:
Tweezers
General usage:
Holding small, delicate or sterile articles
Material:
● White PMP (sharp end)
● Yellow POM (blunt end)
Features:
● Length 115mm
Material:
● Stainless steel
Features:
Length 125mm
SHARP END
CATALOGUE #
067895
BLUNT END
CATALOGUE #
1K500
SHARP END
CATALOGUE #
08094010
BLUNT END
CATALOGUE #
08094011
fractionating columns
General usage:
Fractionating assemblies
Material:
Boro-silicate glass
Modifications:
● Alternate ground cone and socket sizes
● Coolant jacket
● Retaining hooks and springs
Accessories:
● Keck retaining clips
DUFTON
Specific usage:
Gas analysis
Features:
●
●
●
●
Operation:
Liquid spirals down the column and meets the ascending vapour
CODE
FC1/12
FC1/22
FC2/13
FC2/23
SOCKET & CONE mm
B19
B19
B24
B24
Ground cone and socket
Inner rod
Fitted glass spiral that can be removed for cleaning.
Drip tip
JACKET LENGTH mm
150
300
150
300
CATALOGUE #
24042204
24042404
24042205
24042405
609
fractionating columns
HEMPEL
Features:
● Ground cone and socket
● Packing support
Accessories:
Raschig rings, Fenske helices or glass beads
Operation:
Liquid cascades down the packing and meets the ascending vapour
CODE
FC7/23
FC7/43
FC7/44
FC7/53
FC8/23
FC8/43
SOCKET & CONE mm
B24
B24
B29
B24
B34 & B24
B34 & B24
JACKET LENGTH mm
250
500
500
750
272
522
CATALOGUE #
24040305
24040605
24040606
24040805
24040375
24040675
CODE
FC8/06
FC8/09
FC8/4S
EX13
SIZE mm
6
9
4
CATALOGUE #
2403906
2403909
2403904
2403905
PACKING
Raschig rings
Raschig rings
Fenske helices
Spiral support
PEAR/BULB
Features:
● Ground cone and socket
● Set of bulbs and pears which can be removed for cleaning
● Drip tip
Operation:
The bulbs are inserted into the column with the narrower diameter downwards.
They are each separated by a glass pear (bubble). A liquid seal is formed between
them and the column wall. Ascending vapour causes oscillation of the pears and
resultant efficient mixing of liquid and vapour. The castellations allow excess
liquid to flow down from bulb to bulb thereby reducing back-pressure and hold-ups
CODE
FC6/23A
SOCKET & CONE mm
B34 & B24
JACKET LENGTH mm
225
CATALOGUE #
2404375
PACKING
CODE
Bulb FC6/00
Pear FC6/10
SNYDER
Features:
CATALOGUE #
2404500
2404510
● Ground cone and socket
● Fitted glass spikes and plugs
Operation:
Liquid cascades down the column and meets the ascending vapour which pushes
the plugs upwards out of their sockets thus increasing the vapour-liquid contact
and preventing flooding
CODE
QD-3112
SOCKET & CONE mm
24/29
VIGREUX
Features:
JACKET LENGTH mm
350
CATALOGUE #
2404405
● Ground cone and socket
● Combination of horizontal and angled spikes
● Drip tip
Operation:
The horizontal spikes cause good vapour-liquid contact and the angled spikes
redistribute liquid from the column walls to the centre of the column
CODE
FC3/13
FC3/23
FC3/14
SOCKET & CONE mm
B24
B24
B29
JACKET LENGTH mm
360
600
360
CATALOGUE #
24041605
24041705
24041606
610
fractionating head
General usage:
Division of liquid in a fractional distillation process
Material:
Boro-silicate glass
Features:
●
●
●
●
●
●
Modifications:
● Alternate ground cone sizes
● Screwthread tubing connections
● Retaining hooks and springs
Accessories:
● Thermometer
● Keck retaining clips
Operation:
Fits on top of a fractionating column. Liquid leaving the integral condenser is directed
towards the spindle valve, adjustment of which controls the proportion of liquid
returned to the column or that is collected
Integral jacketed spiral condenser
Ground cones
Standard 9mm tubing olives
Screwcap for thermometer
Spindle valve
Side arm for venting or connection to a vacuum supply
CODE
SH30/42
CATALOGUE #
0524080
fractionating reflux divider
General usage:
To control the proportion of collected or returned liquid in a fractionating distillation assembly
Material:
Boro-silicate glass
Features:
●
●
●
●
●
●
Modifications:
Retaining hooks and springs
Accessories:
● Condenser
● Keck retaining clips
Operation:
Insert the sluice head into the fractionating column and the distillate adapter into the socket of a condenser.
Close the spindle valve to allow all liquid to return into the column. Open the spindle valve progressively to
allow a greater proportion of liquid to be directed to a receiver
Sluice head
Spindle valve
Ball and cup joint
Distillate head adapter
Sockets and drip tip cones
Retaining spring clip
CATALOGUE #
24170
It is recommended that a condenser be fitted to the outlet cone of the sluice head as the liquid leaving the
distillate head could be close to boiling point
freezing point determination set
General usage:
Determination of freezing point of a liquid
Material:
Boro-silicate glass
Components:
●
●
●
●
●
●
800ml beaker
Two test tubes one of which fits into the other
Lid with thermometer hole and centre hole
Two rubber stoppers
Agitator
Two thermometers
CATALOGUE #
ZGA010004
611
funnels - glass
General usage:
Facilitatory filling of vessels and qualitative and quantitative filtration
Features:
● Conical - 58-60
● All, except short stem and powder, are ribbed for rapid filtration and prevention of sealing
Accessories:
● FILTECH filter paper circles
● Stand
Material:
● Boro-silicate glass
Modifications:
Addition of a ground cone to the stem
RIM DIAM. mm
35
45
50
55
65
70
80
100
110
150
Material:
º
ANALYTICAL
CATALOGUE #
LONG STEM
CATALOGUE #
POWDER
CATALOGUE #
RIBBED, FLUTED
CATALOGUE #
SHORT STEM
CATALOGUE #
052135123
052135128
052135432
052135133
052133137
052133141
052135338
052135341
052135438
052135446
052135238
052135241
052135246
052135138
052135141
052135146
052133148
052135157
● Soda-lime glass
Not recommended for hot liquids
RIM DIAM. mm
50
60
70
75
100
120
150
THISTLE
Specific usage:
Material:
LONG STEM
CATALOGUE #
05793208
05793210
SHORT STEM
CATALOGUE #
0511241060
0511241080
0511241110
0511241190
0511241230
0511241310
● Containment of splashing
● Soda-lime glass
RIM DIAM. mm
40
CATALOGUE #
600399
612
funnels - plastic
General usage:
Facilitatory filling of vessels and qualitative and quantitative filtration
Material:
Polypropylene and HDPE. The Urbanti funnel is PMP (TPX)
Features:
● Conical - 58-60
● All, except powder, are ribbed for rapid filtration and prevention of sealing
● The Urbanti has internal spiral ribs for rapid filtration
Funnel diameter
50mm
55 - 65mm
70 & 80mm
RIM DIAM. mm
60
75
80
100
120
140
150
180
200
220
250
300
º
FILTER PAPER CHART
Filter paper to use
Funnel diameter
5.5 & 7cm
100 & 110mm
7 & 9cm
120mm
11 & 12.5cm
150mm
LONG STEM
CATALOGUE #
1K162
1K164
1K165
POLYPROPYLENE
SHORT STEM
CATALOGUE #
06413-94
1K150
1K152
1K153
1K155
1K156
06417-94
Filter paper to use
15 & 12.5cm
18.5 & 24cm
24 & 27cm
POWDER
CATALOGUE #
1K171
1K167
06709-94
1K169
1K170
1K166
PMP (TPX)
URBANTI
CATALOGUE #
063252-95
HDPE
GENERAL PURPOSE
1K4171
1K172
1K173
1K174
1K175
1K176
1K177
1K178
FUNNEL HOLDER
Material:
Polypropylene
Features:
● Supports two funnels
● Rod screw lock
Accessories:
● Retort stand
CATALOGUE #
18242
gas collection tube
General usage:
Collecting and weighing generated gasses
Material:
Boro-silicate glass
Features:
● Stopcocks with glass keys each end
● Standard 9mm tubing olive
Modifications:
●
●
●
●
CODE
GRF246
CAPACITY ml
250ml
Alternate screwthread tubing connectors
Alternate double oblique bore stopcocks
PTFE stopcock keys
Screwthread tube for septum
CATALOGUE #
2415836
613
gas jars
General usage:
Collecting generated gasses
Material:
Soda-lime glass
Features:
● Cylinder with lipped rim
● Flat ground flange
● Cover
SIZE mm
150 x 50
200 x 50
CATALOGUE #
05600405
05600410
Accessories:
● Beehive shelf
Operation:
The bee hive shelf is usually placed in a trough of water. A bent
glass tube from the gas generating apparatus is led under the shelf
through the arch. A gas jar is filled with water and placed upside
down over the hole in the bee hive shelf. The gas bubbles upwards
from the tube, displacing water which is forced down through the
hole. When the cylinder is full the cover is slid between the jar and
the shelf thus sealing in the gas.
gas washing bottles
General usage:
Wash or dry gases of unwanted constituents
Material:
Boro-silicate glass
ARNOLD ABSORPTION BULB
Features:
● Inner bulbs
● Straight tubing connectors
CODE
ARF008
DRECHSEL
Features:
CAPACITY ml
125
CATALOGUE #
24018
CAPACITY ml
125
150
250
500
CATALOGUE #
0524018
2402065
2402085
2402095
● Ground neck socket
● Solid base
CODE
MF29/3/125
MF29/3/250
MF29/3/500
WASHING HEADS
Features:
●
●
●
●
Ground cone
Sintered candle distributor
Straight tubing connection pipe
Dip tube - fixed or adjustable
Dreschel, plain dip tube
Dreschel, sintered candle distributor
Dreschel, adjustable dip tube
Dreschel, adjsable dip tube and distributor
CODE
MF28
MF48
MF27
-
CATALOGUE #
240215
240225
240235
240245
614
gas washing bottles
General usage:
Wash or dry gases of unwanted constituents
Material:
Boro-silicate glass
MIDVALE ABSORPTION BOTTLE (BULB)
Features:
● Bulbous base
● Outlet tube in ground neck socket
● Hollow glass stopper with hole to match outlet tube
Outlet tube is in the socket allowing flow-closure by a turn of the stopper
Operation:
CODE
ARF010
SCHOTT
Features:
●
●
●
●
●
Modifications:
CATALOGUE #
24017
Wash head
Distribution tube
GL45 screwcap
Screwthread tubing connectors
White enamel graduations
Sintered candle of choice on distribution tube
CAPACITY ml
250
500
1000
2000
WASH HEAD
CATALOGUE #
2401936
2401944
2401954
2401963
24065
gloves - disposable
Material:
Latex and nitrile rubber
Features:
● Available in small, medium and large. Latex available in powdered and powder-free
Pack size:
100
SIZE
Small
Medium
Large
LATEX
POWDERED
CATALOGUE #
08093717
08093727
08093737
NITRILE
POWDER-FREE
CATALOGUE #
08093718
08093728
08093738
CATALOGUE #
08093719
08093729
08093739
615
gloves & hand protectors
General usage:
Handling hot and biohazard items, hot objects out of the autoclave or oven and where other heat protection is needed
"CLAVIES"
Replace hazardous asbestos gloves
Material:
Soft, pliant, all-cotton terry cloth
Features:
●
●
●
●
Heat resistant up to 232ºC
Machine wash, tumble dry
Gauntlets in two lengths provide wrist and forearm protection
The bright orange colour gives high visibility
GAUNTLET
LENGTH mm
130
280
HOT GRIPS
Material:
Features:
CATALOGUE #
08132010
08132011
Silicone rubber.
º
º
● Application range from -57 C to +250 C
● Multi-studded surfaces
CATALOGUE #
1K3915
hirschson flasks
Alternate names:
Phenol flask
General usage:
Determination of phenols in oils
Material:
Boro-silicate glass
Features:
● White enamel graduations
● Beaded rim
● Long neck
Modifications:
Addition of ground socket
Accessories:
Rubber bung
CAPACITY ml
150
200
CATALOGUE #
2411329
2411332
616
hydrometers
Alternate names:
Density meter. Aerometer
General usage:
Establishing the density of a liquid or preparation of an identified liquid based on Archimedes's Principle
Operation:
Allow the hydrometer to float freely and determine the reading at the surface level of the liquid
RANGE
0.8 to 0.9
0.9 to 1.0
1.0 to 1.1
1.1 to 1.2
1.2 to 1.3
1.3 to 1.4
1.4 to 1.5
1.5 to 1.6
1.6 to 1.7
1.7 to 1.8
1.8 to 1.9
1.9 to 2.0
CATALOGUE #
H0809
H0910
H1011
H1112
H1213
H1314
H1415
H1516
H1617
H1718
H1819
H1920
incinerating dishes
General usage:
Incineration of samples for analysis. The deep form is primarily used for incinerating flour
Material:
Porcelain
Features:
● Glazed inside and outside
● Spout on the deep form
CAPACITY ml
CYLINDRICAL 20
30
45
DEEP 35
FLAT 5
8
10
RECTANGULAR 10
15
12
15
SIZE
40 x
50 x
60 x
57
37 x
42 x
47 x
48 x
55 x
70 x
57 x
mm
20
25
30
10
11
12
25
40
45
23
CATALOGUE #
331
332
334
5032
33D2
33D3
33D4
33C00
33C00b
33C4b.
33C7
617
inlet tubes
General usage:
Introduction of air, steam or gas into reactions.
Material:
Boro-silicate glass
Features:
Ground cone
CODE
MF15/0
MF15/1
MF15/2
MF15/3
MF15/4
TYPE
Straight
Straight
Straight
Straight
Straight
-
100mm
100mm
150mm
150mm
150mm
CONE mm
B10
B14
B19
B24
B29
CATALOGUE #
24190150
24190151
24190152
24190153
24190154
iodine flasks
General usage:
Storage of iodine and other halogenous substances
Material:
Boro-silicate glass
Features:
● Ground neck socket
● White enamel graduations
● Neck collar
Modifications:
Amberise
STOPPER
Features:
CAPACITY ml
100
250
500
1000
NECK mm
B24
B24
B29
B29
CATALOGUE #
0524192270
0524192370
0524192460
0524192560
● Ground cone
● Hollow pointed
● Long shank
SIZE mm
B24
B29
CATALOGUE #
05243055
05243056
jack
General usage:
Supporting and elevating laboratory bench equipment
Material:
Polycarbonate
Features:
●
●
●
●
●
●
Steam autoclavable at 121°C
Large height adjusting knob to set heights from 76mm to 30cm
Supports lab items up to 6.8 Kg.
Electrically non-conductive
Top plate diameter of 21cm
Can be permanently mounted to the laboratory bench
Do not lift weight from the bottom position. Place weight after raising to the
desired position
CATALOGUE #
Jack 183911
Support rod 183912
618
jars
General usage:
Specimen storage
Material:
HDPE
Features:
● Screwcap
CAPACITY ml
100
250
500
1000
PACK SIZE
100
150
100
99
Material:
Polypropylene
Features:
● Screwcap
● Write-on section
CAPACITY ml
150
CATALOGUE #
1K5640
CATALOGUE #
2010032
2025032
2050032
2100032
kipp's apparatus
General usage:
Gas generation
Material:
Soda-lime glass
Features:
●
●
●
●
Reaction chamber
Reservoir
Glass key stopcock
Three-bulb fermentation tube
CAPACITY ml
500
1000
CATALOGUE #
600470
600471
619
kjeldahl distillation unit
General usage:
Kjeldahl distillations
Material:
Boro-silicate glass
Components:
●
●
●
●
●
●
Kjeldahl flask
Delivery adapter
Liebig condenser
Dropping funnel
Splash head
Two-neck multiple adapter
●
●
●
●
Regulate the heating source carefully
Use the least necessary concentration of potassium sulphate
Avoid excess of sodium hydroxide (caustic soda)
Avoid distilling to a low liquid level
CATALOGUE #
ZGA020006
kjeldahl flasks
General usage:
Kjeldahl distillations
Material:
Boro-silicate glass
Features:
● Long neck
● Beaded rim
● Round bottom
Modifications:
● Addition of ground socket
● Amberise
CAPACITY ml
50
100
250
500
1000
NECK DIAMETER mm
22
22
34
34
34
CATALOGUE #
0521231170
0521231240
0521231360
0521231440
0521231540
kohlrausch flasks
General usage:
Determination of viscosity of liquids
Material:
Boro-silicate glass
Features:
●
●
●
●
Widened neck above the volume level
Mark at volume level
Beaded rim
Flat bottom
CAPACITY ml
50
100
200
CATALOGUE #
2411217
2411224
2411232
620
labeling systems
General usage:
Laboratory labeling and marking
LABEL TAPES
Write-On TM Label Tape colours match the Chemical Industry's color-coding system, making chemical
labeling immediately identifiable. Six tape colours correspond with recognized hazard colour codes to
emphasize safety information written on the labels; use green for safety labels, blue for labels that indicate
health hazards, red for alerts about flammability, yellow for warnings about chemical reactivity, orange to note
biohazard issues and white to highlight specific hazards. Write-On TM Label tape adheres to any clean surface,
including PTFE fluoropolymer resin coated materials, and peels off without leaving a sticky residue that
could bond to the surface during autoclaving. The tape is custom manufactured from proprietary materials
that resist moisture and most solvents. The tape remains in place and withstands broad temperature and
environmental extremes; from steam autoclaving at 121ºC down to 73ºC, ensuring samples are always
"labeled". Pencil, ballpoint pen or solvent ink marker remains legible under the most demanding laboratory
conditions.
CATALOGUE #
34610
Holds and releases tape cut to required length. Accommodates tape rolls up to 133mm wide and the 7.0cm
core fits standard tape rolls up to 25mm wide. A writing platform accommodates both left and right handed
users for labeling tape prior to dispensing. The epoxy coated steel platform has finger holes for releasing the
tape with a cut off edge for one hand use. A weighted base with non skid pads prevent sliding or lifting. The
base is 213mm long x 87mm wide x 95mm high with a 102 x 152mm platform
DISPENSERS:
SINGLE ROLL
30meter x
WHITE
WHITE
WHITE
RED
RED
RED
YELLOW
YELLOW
YELLOW
GREEN
GREEN
GREEN
BLUE
BLUE
BLUE
ORANGE
ORANGE
ORANGE
WIDTH
13mm
19mm
25mm
13mm
19mm
25mm
13mm
19mm
25mm
13mm
19mm
25mm
13mm
19mm
25mm
13mm
19mm
25mm
CATALOGUE #
3463005
3463075
3463010
3463105
3463110
3463105
3463175
3463210
3463205
3463275
3463310
3463305
3463375
3463410
3463405
3463475
3463510
3463505
621
labeling systems
MULTI-ROLL
The Write-On TM multi-roll tape dispenser makes labeling easy and fast. Multiple colours and widths of labeling tape are readily positioned on a platform tha
provides a smooth surface for writing on each tape. When a tape is advanced and cut off on the serrated edge, a fresh length of label tape is positioned on the
writing platform. A variety of labeling tape widths from 12 - 25mm can be mixed together on the spindle which can easily accommodate 5 or more narrow rolls
12 - 19mm or four wider rolls 25mm. The spindle can be removed from the unit for loading and unloading tape and can be adjusted to hold either 25 or 75mm core
diameter rolls. Included with each dispenser are three plastic separating discs, which when placed between the rolls assure smooth, snag free dispensing for up to
four rolls of tape. Moulded -in pen holder wells on the dispenser help to keep writing instrument handy. The dispenser can also be wall mounted vertically o
horizontally with the platform, the mounted dispenser can be equipped with an optional U-shaped stainless steel foot accessory that presents the dispenser at a
45º angle off of the wall.
CATALOGUE #
Multi-roll dispenser 34730
Additional separator discs 34693
Wall mount bracket 34731
A highly popular, permanent labeling system that offers great flexibility and convenience for identifying containers, cabinets, drawers, books and lab equipment. This
unique system incorporates a tape dispenser, color-coded labels and clear, waterproof, wear-resistant plastic tape which fully covers and protect the label. The
durable tape dispenser (A) is molded of strong ABS plastic with a steel serrated cutting blade. The roll is held in place by a spring-loaded cover and features an
aluminium roller. 206 x 117 x 60mm. An optional weighted base (B) prevents surface spillage.
Dispenser
Weighted base
White labels: 12.5 x 38mm x 1000
25 x 76mm x 1000
38 x 76mm x 1000
Protective tape: 25mm x 30m
38mm x 30m
50mm x 30m
INK COLOUR
Belpen markers: pack of 3 Black
Blue
Manomark pens: Box of 12 Assorted*
Box of 12 Black
Tech pens: Black
Black
Waterproof ink that withstands autoclaving
Red
White
Yellow
Blue
Green
Orange
CATALOGUE #
34500
34501
34505
34510
34515
34310
34315
34320
CATALOGUE #
33740
33742
33770
33771
33820
33841
33842
33843
33844
33845
33846
33847
622
laboratory bottles
Alternate names:
Sample bottles. Schott bottles. Specimen bottles
General usage:
Storage of reagents
Material:
Boro-silicate glass
Features:
●
●
●
●
Modifications:
● Addition of side arm
● Addition of stopcock
Accessories:
● Different colour pouring rings
● Different colour screwcaps
Retrace code for batch traceability via the internet at www.duran-group.com/english/products/duran/certification/retrace.html
Pouring ring
White enamel graduations
Blue GL45 screwcap except 50ml which has GL32
Loosen caps before autoclaving
CAPACITY ml
50
100
250
500
1000
2000
5000
10000
15000
20000
CLEAR
CATALOGUE #
0521801175
0521801245
0521801365
0521801445
0521801545
0521801635
0521801735
0521801865
0521801885
0521801915
AMBER
CATALOGUE #
0521806175
0521806245
0521806365
0521806445
0521806545
0521806635
0521806735
0521806865
0521806885
0521806915
SQUARE
CATALOGUE #
0521820365
0521820445
0521820545
POURING RINGS & SCREWCAPS
Material:
Polypropylene except red which are ETFE
Blue
Red
White
Blue
Red
White
Green
Yellow
Grey
SIZE
GL32
GL32
GL32
GL45
GL45
GL45
GL45
GL45
GL45
POURING RINGS
CATALOGUE #
082924219
082924419
082924220
082924228
082924428
082924221
081089914
081089911
081089917
SCREWCAPS
082923919
082924019
082933919
082923928
082924028
082933920
0829338286
0829338280
0829338288
623
laboratory bottles - hplc
General usage:
Feeding solvents (eluents) to HPLC machines and collection of waste from HPLC processes of culture media under pressure
(e.g. fermenter). Can also be used in all self-contained systems entailing sterile transfer
Material:
Bottle: Boro-silicate glass . Cap: PTFE and polypropylene
Conformity:
The bottle has a special geometry according to ISO 4796, and is pressure/vacuum resistant in a range from –1 to +1.5 bar. The pressure
resistance has been safety tested as per EN 1596 and is TÜV-GS certified
Features:
●
●
●
●
●
●
●
●
Operation:
The four ports make it possible to serve three stations at the same time
from one container. At the same time, the fourth port can be used for
sterile pressure equalization. Unused ports can be closed with the
special seals
Accessories:
● Pressure equalisation set with 0.2µm membrane filter
● Tubing
● Cleaning brush
CAPACITY ml
500
1000
Retrace code for batch traceability via the internet at www.duran-group.com/english/products/duran/certification/retrace.html
Blue GL45 screwcap with 4 ports for tubing 1.6mm or 3.2mm
Pressure resistant bottle
4 seals for ports
4 seals for 1.6mm tubing
4 seals for 3.2mm tubing
Blue enamel graduations
Ready for immediate use
CATALOGUE #
0521129821
0521129820
laboratory bottles - wide neck
Alternate names:
Sample bottles. Schott bottles. Specimen bottles
General usage:
Storage of reagents
Material:
Boro-silicate glass
Features:
● Blue GL45 screwcap
● White enamel graduations
● Retrace code for batch traceability via the internet at
www.duran-group.com/english/products/duran/certification/ retrace.html
Loosen caps before
autoclaving
CAPACITY ml
500
1000
2000
5000
WIDE NECK
CATALOGUE #
051112627
051112713
051112715
051113949
CAP 081112716
624
magnetic stirrers
Alternate names:
ELECTRIC
Features:
Magnetic mixer
● Variable speed - 100 to 1000 rpm
● 240 volts
● Maximum stirring capacity 1000ml
CATALOGUE #
600471
ELECTRIC WITH HOT PLATE
Features:
● Variable speed - 0 to 1250 rpm
● 220 volts
● Heating temperature up to 500ºC
CATALOGUE #
73645
WATER/AIR TURBINE STIRRER
Material:
Polypropylene/ABS
Features:
● Operated by water or air pressure
● Can be used flat on the bench or clamped onto a retort stand
Accessories:
● Water pump
● Magnetic stirrer bars
● Tubing
CATALOGUE #
1K203
625
magnetic stirring bars
General usage:
Facilitates agitation of liquids in beakers, bottles or flasks
MAGNETIC STIRRING BAR SELECTION & USE
Matching the drive and stirring bar can dramatically improve results!
Magnetic stirring and mixing is used in a number of common laboratory procedures. The importance of selecting the best stirring bar for each particular application is often
overlooked. Varying the size, shape or length of the magnetic stirring bar will after the motion imparted to the solution. Thus, selection of the appropriate stirring bar for given
application should be done with great care.
Understanding the principles of magnetism is important. On the most basic level, we are aware that opposite poles attract. However, we must also understand the significance
of the drive element, magnetic coupling,” spin-out”, vessel shape, viscosity and turbulence.
The drive motor of a magnetic stirrer provides the rotation necessary to spin the drive magnet. The drive magnet is generally a bar or “U-shaped” alloy or a ceramic disk. The
magnetic poles are typically about 50mm apart in bench top models. The poles can be up to 140mm apart in units large enough to mix 190litres of liquid solution. For optimum
efficiency and magnetic coupling, the distance between the magnetic poles of the drive magnetic poles of the drive magnet and the length of the stirring bar should be equal.
Therefore, the drive magnet dictates the longest possible stirring bar that can be used effectively. A small metal washer moved around the surface plate of the stirrer will
naturally gravitate towards one of the poles of the drive magnet. A small magnetic stirring bar will provide similar results.
Another important parameter in choosing a magnetic stirring bar is the vertical distance between the drive magnet and stirring bar. The material and thickness of the cover plate
as well as that of the containing vessel can also influence stirring efficiency. Cover plates are made of paramagnetic materials such as ceramic or aluminum, which offer better
coupling of the drive magnet and stirring bar. The magnetic energy is not impeded as it might be if the top were made of magnetic materials.
The amount of magnetic energy that joins the two magnets (coupling) falls off as the distance between them increase. Stated mathematically, “the coupling energy of force is
inversely proportional to the square of the distance between them”. It stands to reason that for the best magnetic coupling, the distance between the magnets should be
minimized.
Magnetic stirring bars are generally made of ALNICO (an alloy of aluminum, nickel, iron and cobalt) encapsulated in an FDA approved PTFE coating. This combination offers
the best compromise of magnetic strength, usefulness and cost. The PTFE coating is only useful at temperatures up to 225 °C . Other coatings or coverings such as glass tubing,
polypropylene and polyethylene are also used. More exotic materials have not been found to be commercially viable. High energy materials, such as Samarium Cobalt and
Neodymium Iron Boron, though having a much higher energy product (Bd x Hd) than ALNICO V, do not always work better as drive magnets.
The geometry of the magnet, in the case of bar magnets, length/diameter (L/D), governs how effective the magnet will be. The aforementioned magnets have energy products
of three to six tomes that of ALNICO V in geometry of 1 to 1. When used in a 4 to 1 configuration, their relative levels are nearly the same or less than the ALNICO V.
Additionally, many of the exotic materials are extremely temperature sensitive and will demagnetize as the temperature increases.
Once a magnetic stirring bar has been placed in a container with a solution, it should be
positioned directly over the centre of the drive magnet. The stirring speed should be
increased slowly, until the desired vortex pattern is achieved. Should the magnetic stirring
bar lose its coupling with the drive magnet because of the speed of the drive magnet or the
viscosity of the fluid, it is said t have “spun-out”.
Improperly selected stirring bars are the
frequent cause of “spin-out”, as well as a drive magnet speed that is too fast. Matching the
drive and stirring magnet improves results dramatically. The selection of the shape of the
magnetic stirring bar also influences the resulting vortex.
626
magnetic stirring bars
Alternate names:
Spin bars
Material:
PTFE coated magnetic iron alloys
POLYGON & OCTAGON
Features:
● The 3712 series are polygon shape
● The 3711 series are polygon shape with a centre pivot ring
● The 3709 series are octagon, coloured, with a centre pivot ring
APPROXIMATE
SIZE mm
8 x 16
8 x 20
8 x 25
8 x 30
8 x 40
8 x 50
ELLIPTICAL (egg shaped)
Features:
CATALOGUE #
3712058
3712020
3712025
3712030
3712040
3712050
RED
CATALOGUE #
3710904
YELLOW
CATALOGUE #
3710905
BLUE
CATALOGUE #
3710906
3710910
3710911
3710912
3710919
3710920
3710921
● Provides its own pivot point
● Designed especially for round bottom flasks
APPROXIMATE
SIZE mm
10 x 19
16 x 38
19 x 40
19 x 50
KOMET
Features:
WITH PIVOT RING
CATALOGUE #
3711058
3711078
3711001
3711018
3712240
3712250
●
●
●
●
●
●
FOR ROUND
BOTTOM FLASK
>250ml
500ml
1000ml
2000ml
CATALOGUE #
3713034
3713012
3713058
3713002
Octagonal shape - 21x50mm
High energetic samarium-cobalt magnet
Generates strong turbulence
Produces exceptional power
No risk of demagnetization by external magnetic fields
Improved efficiency
CATALOGUE #
3717400
CIRCULUS (dumbbell)
Specific usage:
Features:
LENGTH mm
32
52
●
●
●
●
"Problem" liquids
Highly viscous mixtures
Mixtures containing metal particles in suspension
Containers with round or convex bottoms
●
●
●
●
Fast mixing action
High turbulence
Greater stability
Minimal drifting at high speeds
WHITE
CATALOGUE #
1B3717000
1B3717200
RED
CATALOGUE #
3717001
3717201
YELLOW
CATALOGUE #
3717002
3717202
BLUE
CATALOGUE #
3717003
3717203
627
magnetic stirring bars
SATURN (bulb)
Specific usage:
● Where powders in a liquid impedes stirring action
Features:
● Large central bulb
Operation:
The large bulb at the bar's center lifts the stirring bar ends while
spinning and thereby reduces the surface contact area to allow the
bar to spin with decreased drag.
LENGTH mm
40
SPINRING
Features:
Operation:
● Octagonal shape
● Removable stabilising ring
The stabilising ring keeps the bar centered in the vessel. The action creates a deep
vortex without splashing or chattering and resists spinout
APPROXIMATE
SIZE mm
8 x 12
8 x 25
8 x 38
8 x 50
SPINWEDGE
Specific usage:
Features:
● Sharply angled broad faces
● Strong mixing action
APPROXIMATE
SIZE mm
10 x 13
10 x 25
13 x 45
13 x 50
To fit exactly into beakers
Features:
Fits exactly the inside diameter of the beaker
Operation:
Creates a deep vortex at relatively low speeds
APPROXIMATE
SIZE mm
10 x 19
16 x 38
19 x 40
Operation:
CATALOGUE #
3714005
3714010
3714015
3714020
To plow up sediment for thorough dispersion of viscous solutions
SPINSTAR
Specific usage:
SPINPLUS
Features:
CATALOGUE #
3711602
CATALOGUE #
3712301
3712302
3712300
3712303
FOR BEAKER
100ml
250ml
400ml
CATALOGUE #
3714610
3714625
3714640
APPROXIMATE
SIZE mm
19
25
32
38
CATALOGUE #
3714434
3714410
3714414
3714412
● Fast and efficient mixing
● Stable, quiet operation
Creates a deep vortex
628
magnetic stirring bars
SPINFIN
Specific usage:
Features:
Agitation of liquids in round bottom test tubes, and where other stirring bars cannot be used
● Fins on top and bottom for complete agitation
● Will not wobble
APPROXIMATE
SIZE mm
13 x 13
19 x 16
16 x 13
CATALOGUE #
3712612
3712634
3712558
SPINVANE
Tapered
Half round
Triangular
Triangular
MAGNETIC PICK-UPS:
RETRIEVER
Material:
Features:
RETRIEVER FOLLOWER
Material:
Features:
CATALOGUE #
3713700
3713600
3713400
3713500
PE
●
●
●
●
Powerful Alnico magnet
Hang-up loop
305mm long
9.5mm diameter
CATALOGUE #
318293
PE
● Long ribbed handle
● 200mm long
● 9.5 mm diameter
CATALOGUE #
3777500
This retriever is able to remove a magnetic stirring bar without coming into
contact with the contents of the vessel. It eliminates contamination of contents
and does not need to be cleaned or autoclaved after use. The retriever is held in
contact with the vessel where the magnetic stirring bar rests. It is then moved
upward with the stirring bar following inside the vessel to a point where it can be
grasped
629
magnetic stirring bars
FLEXIBLE RETRIEVER
Specific usage:
Retrieving magnetic stirring bars from containers or from non-magnetic sink drains and traps
Material:
PTFE
Features:
● Flexible rod 330mm long
● Hanging loop
● Chemical resistant
POSITIONER/RETRIEVER
Material:
PE
Specific usage:
Position the stirring bar exactly where you want it without splashing. Remove bars without touching
or pouring out contents of the vessel
Features:
● Hanging loop
● 305 mm long
● 16 mm diameter
Operation:
To pick up a stirring bar, hold the polyethylene retriever down; to release a stirring bar, slide the retriever up
ARRESTER
Material:
PE
Specific usage:
To hold a stirring bar in place whilst pouring from a beaker or flask
Operation:
Place the arrester against the bottom of the container
WHITE
CATALOGUE #
Flexible retriever 3777400
Positioner/retriever 3778000
Arrester
RED
CATALOGUE #
3777401
BLUE
CATALOGUE #
3777402
YELLOW
CATALOGUE #
3777403
3778600
magnifier
Material:
Plastic
Features:
8031055 - the lens folds into the handle
MAGNIFICATION
3.4 x
10 x
DIAMETER. mm
50
25
CATALOGUE #
08031000
08031055
630
manifolds
General usage:
Distribution of, and control of, flow of vacuum in vacuum assemblies
Material:
Boro-silicate glass
Features:
●
●
●
●
●
Modifications:
● Screw thread tubing connector
● Addition of further ports
25mm diameter manifold body
Ground socket
Stopcock of choice
Standard 9mm tubing olive
Horizontal or vertical outlets
TYPE
2-port
3-port
LENGTH mm
210
280
CATALOGUE #
24280
24281
markham distillation unit
Specific usage:
Nitrogen determination
Material:
Boro-silicate glass
Features:
● Evaporator vessel enclosed in a steam jacket
● Liebig condenser
● Screw thread tubing connectors
Operation:
Cutting off steam supply to the distillation causes the apparatus to automatically
suck back in immediate preparation for the next determination
CATALOGUE #
ZGA020004
mccartney bottles
Alternate names:
Bijou bottles
General usage:
Storage of samples and specimens
Material:
Neutral glass
Features:
● Flat bottom
● Screwcap with inner seal
CAPACITY ml
7
14
28
DIAM. x HEIGHT mm
26 x 53
26 x 84
NARROW MOUTH
CATALOGUE #
05ZVN294
05ZVN288
05ZVN287
WIDE MOUTH
CATALOGUE #
05ZVN195
631
measuring cylinders
General usage:
Receive and accurately measure various quantities of liquids
Material:
Boro-silicate glass
Features:
●
●
●
●
Accessories:
● Cleaning brush
Class A volumetric vessel
Spout
Hexagonal base
White enamel graduations
CAPACITY ml
5
10
25
50
100
250
500
1000
2000
Material:
Plastic
Features:
● Spout
● Hexagonal base
CAPACITY ml
10
25
50
100
250
500
1000
2000
POLYPROPYLENE
CLASS A
CATALOGUE #
06647-04
06648-04
06649-04
06650-04
06651-04
06652-04
CATALOGUE #
0521396070
0521396080
0521396140
0521396170
0521396240
0521396360
0521396440
0521396540
0521396630
CONFORMITY
CERTIFIED
CATALOGUE #
052210154
052210160
052210170
052210175
052210180
052210186
052210190
052210193
052210194
CLASS B
CATALOGUE #
1K2560
1K2561
1K2562
1K2563
1K2564
1K2565
1K2566
1K2567
PMP (TPX))
CLASS B
CATALOGUE #
1K1570
1K1571
1K1572
1K1573
1K1574
1K1575
1K1576
1K1577
measuring jugs
General usage:
Decanting of measured amounts of liquids
Material:
Polypropylene
Features:
Moulded graduations overprinted in blue
CAPACITY ml
250
500
1000
2000
3000
5000
CATALOGUE #
1K1086
1K1087
1K1088
1K1089
1K1090
06445-081
632
medicine droppers
General usage:
Transferring liquids drop-by-drop
Material:
Neutral glass
Features:
● Dropping pipette
● Rubber teat
● Screwcap
SIZE mm
15 x 15
CATALOGUE #
600185
melting point tube
General usage:
Determination of melting points of substances
Material:
Neutral glass
Features:
Lipped rim
CATALOGUE #
24298
mercury collector
General usage:
Capture and contain spilled mercury beads
Operation:
To collect spilled mercury quickly, unscrew the lid with the foam pad the pad. When
the lid is screwed back onto the jar, the pad is compressed against the jar’s
free-standing perforated plate, releasing the mercury into the jar bottom
CATALOGUE #
Collector 1B36250
Spare foam pad 1B636251
633
microscope glasses
General usage:
Mounting and covering of samples or specimens on microscope slides
SIZE
COVER SLIPS 15 x
18 x
20 x
22 x
22 x
22 x
24 x
24 x
SLIDES: Frosted 26 x
Plain 26 x
STORAGE SYSTEMS:
Material:
BOX
Features:
DISPENSER
Features:
Operation:
MAILER
Material:
mm
15
18
20
22
40
50
24
40
76
76
PACK SIZE
100
50
CATALOGUE #
05CS1515
05CS1818
05CS2020
05CS2222
05CS2240
05CS2250
05CS2424
05CS2440
05MS7525
05MS7626
ABS/PS
● Accommodates 25,
50 and 100 slides
● Numbered slots
● Fit into the unit draw
CATALOGUE #
25 place 1K276
50 place 1K277
100 place 1K278
● Accommodates 50 slides
● Dust cover
Rotate the knurled knob on the side of the base. Rubber rollers ease out the
slides which may then be handled on the edges
CATALOGUE #
1K540
Polypropylene
Can also be used as a 12ml specimen vial
CATALOGUE #
1K922
TRAY
Features:
Accessories:
UNIT
Features:
Accessories:
● Accommodates 100 slides
● Numbered slide cavity
● Dust cover
●
●
●
●
Five draws
Addition of more draws
420x420x725mm
Removable top lid
●
●
●
●
Additional draws
Slide tray (10 per draw) for 100 slides
Set of four castors
Dust cover for slide support
CATALOGUE #
1K921
1K920
CATALOGUE #
1K930
634
mixing cylinders
Alternate names:
Stoppered measuring cylinders
General usage:
Volumetric vessel for diluting solutions and accurately measuring and mixing several liquids in a given quantity ratio
Material:
Boro-silicate glass
Features:
●
●
●
●
●
Accessories:
● Glass stopper
● Cleaning brush
CAPACITY ml
10
25
50
100
250
500
1000
2000
Class A
Ground neck socket
Plastic stopper
Hexagonal base
White enamel graduations
CATALOGUE #
B10
B14
B19
B24
B29
B34
B45
B45
SCHOTT
CATALOGUE #
0521618080
0521618140
0521618170
0521618240
0521618360
0521618440
0521618540
0521618630
CONFORMITY
CERTIFIED
CATALOGUE #
052340170
052340175
052340180
052340186
052340190
052340193
moisture trap
General usage:
In distillation apparatus assemblies
Material:
Boro-silicate glass
Features:
● B24 ground neck socket and cone
● Glass key stopcock
Modifications:
● Alternate sizes ground neck socket and cone
● PTFE key stopcock
CATALOGUE #
24064
moreton flasks
General usage:
Improved stirring caused by the indentations
Material:
Boro-silicate glass
Features:
● B24 ground neck socket
● Indentations for increased agitation
● Round bottom
Accessories:
● Stopper
● Cleaning brush
CAPACITY ml
500
1000
2000
CATALOGUE #
24110445
24110546
24110636
635
mortars & pestles
General usage:
Crushing and grinding solids
Material:
Porcelain and melamine
CAPACITY ml
DIAMETER mm
500
100
130
160
500
PORCELAIN
CATALOGUE #
07600420
07600527
07600528
07600530
MELAMINE
CATALOGUE #
0672998
multi-neck flasks
General usage:
Multi-function apparatus assemblies
Material:
Boro-silicate glass
Features:
● Ground neck socket
● Round bottom
● Choice of angled or parallel necks
Modifications:
● Alternate size ground neck sockets
● Flat bottom
Accessories:
● Stopper
● Cleaning brush
CAPACITY ml
50
100
100
250
250
250
250
250
500
500
500
500
500
1000
1000
1000
1000
2000
2000
2000
2000
2000
CENTER NECK mm
B14
B19
B24
B19
B24
B19
B29
B29
B19
B24
B24
B29
B29
B24
B24
B29
B29
B24
B24
B29
B29
B34
SIDE NECK/S mm
B14
B14
B14
B14
B14
B19
B14
B19
B14
B14
B19
B14
B19
B14
B19
B19
B19
B14
B19
B14
B19
B14
2 NECKS
CATALOGUE #
242021733
242022443
242022453
242023643
242023653
242023663
242024443
242024453
242024463
242025453
3 NECKS
CATALOGUE #
242031333
242034433
242032544
242033433
242033533
242033544
242033633
242033644
242034533
05242034544
242034633
242034644
242035433
242035544
242035644
242035666
242025463
242036544
242026363
242036644
242026373
nessler cylinders
Alternate names:
Comparison tubes
General usage:
Comparison of liquids to a standard.
Material:
Soda-lime glass
Features:
●
●
●
●
RACK
Material:
Features:
Matched pair
Flat bottom
Spout
Ring marks at 50ml and 100ml
Polypropylene
● Easy snap together assembly
● Lower deck has reflective surface
CAPACITY ml
100
DIAM. x HEIGHT mm
31 x 200
CATALOGUE #
05NT-100
18986
636
nmr sample tubes
General usage:
Contain samples in NMR spectroscopy
Material:
Boro-silicate glass
Features:
● 5mm diameter
● Three qualities available, each meeting the highest requirements
● Every tube is subjected to a Laser Check System and is individually tested
against its own particular specification
● Coloured caps
QUALITY
Economic
Professional
Scientific
PACK SIZE
250
250
5
CAMBER mm
0.07
0.03
0.013
CATALOGUE #
23170117
23170211
23170314
NMR guarantees reproducible spectra
Various investigations have shown that the specifications of NMR tubes that have been available in the past were often not capable of ensuring a good
quality of spectrum. A new range of NMR tubes has now been developed which caters for all the quality criteria for obtaining optimum spectra that
were only conceivable before.
What is so interesting about NMR tubes that it is worth writing about? Now all NMR users know how very much the quality of their spectra depend on
the quality of the sample vessel they are using. There are initially two reasons for this:
The sample tube is also measured as part of the measuring process. This means that its material and geometry properties should have preferably no
influence on the measurement or at least an influence which can be eliminated by calculation. The sample vessel itself is in an
inaccessible position in the measuring instrument during the measurement process, namely in the middle of the magnet. It should not be disturbed
there under any circumstances since it is very difficult to interfere with it in this position. The material and dimensions of NMR
tubes are subject, therefore, to very stringent requirements – and they are accordingly expensive to manufacture. Before a new range of NMR sample
tubes comes on the market, a large number of tests have to be carried out before the products agree with the specifications laid down. Then, when
they are in full production, measures have to be implemented to ensure that the specifications laid down are adhered to.
NMR quality criteria
The decisive factor for the quality of a spectrum is how accurately the magnetic field is adjusted to the sample in the NMR tube. As this adjustment (or
shimming) can be a complicated process, both the absolute geometry of the tube and the comparability of different tubes are a important quality
criteria. For this reason, the adjustments between the different tubes, e.g. in the sample changer, should be as identical as possible. Shimming is then
only required once and not for each tube. From this the various quality criteria for a good NMR tube can be derived:
Identical sample quantities should come to the same level in several tubes in the sample changer. Otherwise the magnetic field must be readjusted.
● All tubes should have the same diameter as far as possible.
● The wall thickness should be the same at every point.
● The tube must be straight.
● All the tubes must sit firmly in the spinner without moving and must be a good fit.
● The tubes should be robust so that they cannot be damaged in the NMR unit.
● The glass should be chemically resistant and inert to all samples.
● The glass may not contain any paramagnetic impurities that can result in problems in the spectrum.
● The tubes must be labeled so that different qualities can be clearly distinguished.
Nowadays, many samples are measured without rotating them as in former times. The reason here too can be found in the homogeneity of the
magnetic field. If they are not rotated completely evenly the result is a worse spectrum. It is, therefore, better in many cases to compensate for any
irregularities by shimming. However, it is even better to ensure that as few irregularities as possible occur with an accurately specified quality. Most
NMR spectroscopy workers have got used to rolling NMR tubes on a flat surface as a rough test. This way of sorting out the “bananas” makes sense as
a preliminary test in practice, but of course it is not adequate for production development and production control purposes.
637
parafilm
General usage:
Wrapping and sealing samples
CATALOGUE #
08PM996
pasteur pipettes
General usage:
Taking up a small amount of liquid for transfer
Material:
Neutral glass
Accessories:
Rubber teat
Pack size:
250
Material:
Polyethylene
Pack size:
500
LENGTH mm
150
230
CATALOGUE #
05PP150
05PP230
CAPACITY ml
1.5
5.0
CATALOGUE #
1K88336
1K88337
Can be deep-frozen with contents. Tips can be heat-sealed to from a closed
ampoule. Ideal for aliquots
TEAT CAPACITY ml
3ml
CATALOGUE #
086660141
pear shape flasks
General usage:
Micro and semi-micro distillation assemblies
Material:
Boro-silicate glass
Features:
● Ground neck sockets
● B14 ground cone on side arm of 24198 series
Modifications:
Alternate size ground joints
CAPACITY ml
50
50
100
100
100
SOCKET mm
B14
B19
B14
B19
B24
SINGLE NECK
CATALOGUE #
0524195173
24195174
24195243
24195244
24195245
WITH SIDE ARM
CATALOGUE #
24198173
24198174
24198243
24198244
24198245
DOUBLE NECK
CATALOGUE #
24196173
24196174
24196243
24196244
24196245
TRIPLE NECK
CATALOGUE #
24197173
24197174
24197243
24197244
24197245
638
petri dishes
General usage:
Biological and medical applications especially in microscopical studies
Features:
Lid
Material:
Neutral glass
Material:
Polystyrene
Pack size:
500
DIAMETER mm
65
90
DIAM. x HEIGHT mm
60 x 15
100 x 15
CATALOGUE #
054006015
054010015
STERILE
CATALOGUE #
0611265
0611290
NON-STERILE
CATALOGUE #
0611165
0611190
pipette tips
General usage:
Attaching to pipettors for dispensing
Material:
Polypropylene
Features:
Universal fitting for most popular brands of pipettors
Pack size:
1000
CAPACITY ml
2-200
100-1000
COLOUR
Yellow
Blue
CATALOGUE #
1K960
1K961
639
pipettes
General usage:
Accurate measurement and recharging of liquids
Features:
●
●
●
●
Accessories:
● Pipette filler
Class AS
Colour code rings
Graduated, 0 at top
Calibrated to deliver for a reference temperature of 20ºC
Do not fill by mouth - use a suitable pipette filler
Insertion of cotton wool will prolong evacuation time
MEASURING, GRADUATED, TRANSFER
Material:
Soda-lime glass
CATALOGUE #
0563336111
0563336112
05711101211
05711102211
05711103211
05711104211
05711106211
CERTIFIED
CATALOGUE #
CAPACITY ml
0.1
0.2
0.5
1
2
5
10
20
25
50
COLOUR-CODE
2 x green
2 x blue
2 x yellow
yellow
black
red
orange
2 x yellow
white
nil
Material:
Polypropylene
CAPACITY ml
1
2
5
10
25
COLOUR-CODE
yellow
green
blue
orange
red
CATALOGUE #
06163094
06163194
06163294
06163394
SINGLE USE
CATALOGUE #
06160119
06160219
06160519
06161019
CAPACITY ml
0.5
1
2
5
10
20
25
50
100
COLOUR-CODE
2 x black
blue
orange
white
red
yellow
blue
red
yellow
CATALOGUE #
0571200122
0571200222
0571200322
0571200422
0571200522
0571200622
0571200722
0571200822
0571200922
CERTIFIED
CATALOGUE #
050340129
051340133
051340140
051340155
051340160
051340165
051340170
051340175
051340180
Material:
Polypropylene
CAPACITY ml
1
2
5
10
25
50
CATALOGUE #
06164094
06164194
06164294
06164394
06164494
06164594
05711107211
05711108211
051101129
051101133
051101141
051101153
051101160
051101165
051101170
STERILE
CATALOGUE #
06160110
06160210
06160510
06161010
06162510
VOLUMETRIC, BULB
640
pipettes - fillers
PIPETTE BALLS (PRO-PIPETTE) - A
Moulded 60ml rubber bulb with three glass ball valves that can be controlled by finger pressure. Suitable for use with all liquids except those that attack rubber
PIPEO ELECTRONIC - B
Pipette handling made simple and comfortable. Ergonomic light weight handle and excellent balance contribute to operating ease. Freely and precisely adjust the
speed of liquid discharge with one hand, using the two easily accessible buttons. A 50ml pipette can be filled quietly and with minimum vibration in less than 10 sec
Can be set to release liquid either in gravity delivery or blow-out mode using the rechargeable battery-operated motor. A LED lamp changes from green to red
approx. two hours before recharge is necessary and the Pipeo can still be used during recharging. Handles pipettes up to 100ml
MANEUS - C
Allow other left and right handed operation easily, tirelessly and safely with all common pipettes from 0.1ml to 100ml. Easy handling with high sensitivity lets even
inexperienced users to set the meniscus precisely. Easy to dismantle, very simple to clean and completely autoclavable
PIPETTE PUMPS (PI-PUMP) - D
Suction and dispensing is achieved by rotating the thumb wheel. A pressure lever ensures all liquid is evacuated. Available in three different volumes, each colour
coded for easy identification. Made of polypropylene.
PLUNGER - E
Comfortable grip. Press the plunger and release to fill pipette. The knurled cap adjusts the plunger stroke for repeating preset volume. A rubber chuck holds
pipettes securely and safely. Handles pipettes up to 10ml. Graduations on the body
VADOSA - F
Safety pipetting device, easy to use, delivering the smallest quantities with precision and speed. It can draw up and measure any liquid, even the most viscous ones
Fits every type and size of pipette from 0.1ml to 25ml. Simple one handed operation with no hand squeezing, sucking or guessing. Made of polypropylene
ECONOMY PIPETTE PUMPS - G
The ergonomic design enhances comfort, utility and precision dispensing while reducing repetitive and awkward pipetting motions. This lightweight device provides
accurate, trouble free pipetting with simple, one-handed operation. The optimally located thumb wheel rotates easily for precision aspirating or dispensing, down to a
volume of one drop at a time all while using a more relaxed grip. The thumb wheel also can be used to "blow out" the pipette. Available in three different pipette
volumes, each colour coded for easy identification. It resists acids, alkalis and most solvents and can be easily disassembled for cleaning. Over all length 171 mm
A
CAPACITY ml
Standard 0-10
Universal 10-100
CATALOGUE #
08104099
08104199
E
CATALOGUE #
1K198
B
CATALOGUE #
1631500
D
CAPACITY ml
2
10
25
C
CATALOGUE #
061630500
F
CAPACITY ml
>25
CATALOGUE #
1K199
CATALOGUE #
37897
37898
37899
G
CAPACITY ml
2
10
25
CATALOGUE #
3790202
3790210
3790225
641
pipettes - holders
RACKS
CONFIGURATION
PLASTIC 94 Rotary
Box
WOOD 12 Horizontal
12 Vertical
24 Vertical
CATALOGUE #
1K261
1K255
80509
80501
80500
DRAW TRAYS
L x W x H mm
PVC 420 x 300 x 30
285 x 215 x 40
CATALOGUE #
1K252
1K996
pressure equalising funnels
General usage:
Addition of measured amounts of liquid at a set rate under vacuum. Solvent trap to facilitate recovery at the end of a soxhlet extraction
Material:
Boro-silicate glass
Features:
●
●
●
●
Modifications:
● Alternate size ground cone and socket
● PTFE-key stopcock
● Spindle valve
Operation:
The side tube allows equalisation of pressure between the funnel and vessel
Accessories:
● Cleaning brush
Pressure equalisation side tube
Ground cone and socket
Glass-key stopcock
Plastic stopper
CAPACITY
50ml
100ml
250ml
500ml
1000ml
2000ml
NECK
B14
B14
B29
B29
B29
B29
GLASS KEY
CATALOGUE #
24125173G
24125243G
4125366G
24125446G
24125546G
24125636G
PTFE KEY
CATALOGUE #
24125173T
24125243T
24125366T
24125446T
24125546T
24125636T
642
pumps
General usage:
Evacuation of vessels such as Buchner flasks. Can also be used to vacuum up spilled chemicals
WATER-JET VACUUM
Material:
Polypropylene
Features:
●
●
●
●
Break-apart for easy cleaning
Integral non-return valve to prevent back-streaming
Evacuation of 5 litres in 20 minutes
Withstands pressure up to 10 bar
CATALOGUE #
1K1395
HAND
Material:
Features:
High impact polystyrene
●
●
●
●
●
Pressure gauge
Pumping rate is 15 ml per stroke
Attains a vacuum of 625 mm Hg (25")
Built in vacuum release valve
Nozzle fits standard 6 mm (1/4") i.d. tubing
Can be used as pressure pump by transferring release
valve cap to vacuum port
CATALOGUE #
1K1398
pycnometers
Alternate names:
Density bottle. Specific gravity bottle
Material:
Boro-silicate glass
GAY-LUSSAC
Features:
● Ground neck socket
● Matched ground-in glass capillary stopper
● Conforms to DIN 12797
TEMPERATURE MONITORED
Features:
● Ground neck socket
● Adjusted and calibrated
● Side capillary tube with cap
● Conforms to DIN 12810
● Temperature range 100ºC-350ºC
● Ground-in thermometer
CAPACITY ml
25
50
GAY-LUSSAC
CATALOGUE #
0575100261
0575100361
TEMPERATURE
MONITORED
CATALOGUE #
0575110251
0575110351
643
reaction vessels
General usage:
Reactions in apparatus assemblies
Material:
Boro-silicate glass
Features:
● Ground flat flange vessel
● Flange retaining clip
● Lid to order - sockets and sizes
Modifications:
Addition of jacket with inlet and outlet tubing connections to order
Accessories:
● Silicone grease
● Cleaning brush
CAPACITY ml
100
250
500
1000
2000
CATALOGUE #
2410124
2410136
2410144
2410154
2410163
Flat flange reaction vessels may be used to operating wall temperatures up to 250ºC but the temperature difference in the glass should not
exceed 300ºC
Vessels and lids available separately
FLAT FLANGE LIDS
SOCKETS
1
2
3
4
CATALOGUE #
24306
24307
24308
24309
SIZE mm
60
100
CATALOGUE #
082907134
082907146
When ordering please state the number of sockets
required and their sizes
QUICK RELEASE CLAMP
644
reagent bottles
General usage:
Storage of reagents, etc.
Material:
Soda-lime glass
Features:
● Ground neck socket
● Glass stopper
Accessories:
● Cleaning brush
NARROW NECK
NECK mm
B12
B14
B14
B19
B24
B29
B29
B60
B60
CLEAR
CATALOGUE #
0523165150
0523165170
0523165240
0523165360
0523165440
0523165540
0523165630
0521164860
0521164910
AMBER
CATALOGUE #
0523168150
0523168170
0523168240
0523168360
0523168440
0523168540
0523168630
0521167860
0521167910
CAPACITY ml
30
50
100
250
500
1000
2000
NECK mm
B19
B24
B29
B34
B45
B60
B60
CLEAR
CATALOGUE #
0523185150
0523185170
0523185240
0523185360
0523185440
0523185540
0523185630
AMBER
CATALOGUE #
0523188150
0523188170
0523188240
0523188360
0523188440
0523188540
0523188630
Material:
Polypropylene
Features:
● Neck socket
● Plastic stopper
Accessories:
● Cleaning brush
CAPACITY ml
100
250
500
1000
2000
NARROW NECK
NECK mm
B14
B19
B24
B29
B29
CATALOGUE #
061003-94
061004-94
061005-94
061006-94
061007-94
WIDE NECK
NECK mm
B29
B34
B45
B60
B60
CAPACITY ml
30
50
100
250
500
1000
2000
10000
20000
WIDE NECK
CATALOGUE #
061015-94
061016-94
061017-94
061018-94
061019-94
645
receiver tubes
General usage:
Small scale filtrations
Material:
Boro-silicate glass
Features:
●
●
●
●
●
●
Round bottom
Side arm with standard 9mm tubing olive
Beaded rim
Ground socket
Screwthread and cap
Screw thread tubing connector on side arm
SIZE
16 x
18 x
24 x
30 x
40 x
mm
125
150
150
180
250
CATALOGUE #
241941
241942
241943
241944
241945
retort rings
General usage:
Supporting funnels etc. on laboratory scaffold or retort stand
Material:
Galvanised steel
Accessories:
● Bosshead
● Retort stand
SIZE mm
80mm
100mm
CATALOGUE #
08080318
08080320
scalpel
General usage:
Dissecting
Material:
Stainless steel
CATALOGUE #
Blades (N0. 23) 93706
KENSB23
scissors
General usage:
Dissecting
Material:
Stainless steel
Features:
125mm
CATALOGUE #
93902
646
scoops & spoons
General usage:
Scooping of powder for sampling and transfer from wide mouth containers
Material:
Polyethylene
Features:
Stand flat
CAPACITY ml
15
25
65
110
150
STERILE
Material:
Features:
LENGTH mm
115
135
185
215
250
CATALOGUE #
06400-93
06401-93
06402-93
06403-93
06404-93
Polystyrene
●
●
●
●
Individually sterilized and sealed in a polyethylene bag
Issued with individual certificates of sterilisation and production number for accurate traceability
The 3692 series has a specially designed detachable lid thus eliminating the need for a sampling bag
Remain upright when filled or empty
To use the 3692 series simply remove the scoop from the bag and detach the lid using the convenient tab. After taking the sample
replace the snap-on lid and use the scoop as a container for transport
Can be used as weighing boats
CAPACITY ml
60
125
250
LENGTH mm
203
221
216
WHITE
CATALOGUE #
369020
369040
369060
RED
CATALOGUE #
369022
369044
369068
WITH LID
CATALOGUE #
369220
369240
scribe pen
General usage:
Inscribing on glass, ceramics and plastic
Features:
● Retractable tungsten carbide tip
● Pocket clip
CATALOGUE #
1B44150
647
seals
General usage:
In screw caps. Suba seal for bottles and tubes. The seals can also be used as septums for piercing
Material:
Silicone rubber
CAP THREAD SIZE
GL14
GL18
GL25
GL32
SIZE mm
12
16
22
29
CATALOGUE #
082924605
082924606
082924609
082924608
GL45
42
082924610
SUBA SEAL
Material:
Natural rubber
HOLE DIAM. mm
6
6
8
10
12
26
CATALOGUE #
082923406
082923506
082923708
082923610
082923612
082923826
Features:
● Ringed section for complete sealing
● Flap section
Operation:
Insert the ringed part into the bottle neck or tube and bend the flap down over the bottle neck or tube
SIZE mm
14
CATALOGUE #
082410814
HEIGHT mm
475
CATALOGUE #
0675991
1K1056
sedimentation cone
Alternate names:
Imhoff cone
General usage:
Sewage analysis
Material:
Styrene-acrylonitrile
Features:
● Moulded graduations
● Screwcap at tip
CAPACITY ml
1000
STAND
648
separating cylinder
General usage:
Oil separation
Material:
Boro-silicate glass
Features:
●
●
●
●
Order requirements:
● Ground socket size
● Stopcock type
Ground socket
Round base
Stopcock
250ml capacity
CATALOGUE #
24052
separating funnels - glass
General usage:
Draining of separated layers of liquids in a mixture from heaviest to lightest
Material:
Boro-silicate glass
Features:
●
●
●
●
Ground neck socket
Stopcock
Plastic stopper
Drip tip outlet
Modifications:
●
●
●
●
●
Spindle valve
Alternate size socket
Amberise
Ground cone outlet
Side arm
Accessories:
● Glass stopper
● Cleaning brush
● Stand
CAPACITY ml
50
100
250
500
1000
2000
SOCKET mm
B19
B19
B24
B29
B29
B29
PEAR SHAPE
GLASS KEY
CATALOGUE #
052429417G
052429424G
052429436G
052429444G
052429454G
052429463G
PTFE KEY
CATALOGUE #
052429417T
052429424T
052429436T
052429444T
052429454T
052429463T
SQUIBB PATTERN
GLASS KEY
CATALOGUE #
0561165101
0561165102
0561165103
0561165104
0561165105
0561165106
PTFE KEY
CATALOGUE #
0561165620
0561165621
0561165622
0561165623
0561165624
0561165625
CATALOGUE #
ROTARY STAND for 10 x 100,250ml funnels 18963
ROTARY STAND for 6 x 500,1000ml funnels 18964
ADJUSTABLE RACK 18967
649
separating funnels - plastic
General usage:
Draining of separated layers of liquids in a mixture from heaviest to lightest
Material:
Polypropylene and PMP(TPX))
Features:
●
●
●
●
Neck socket
Stopper
Stopcock
1K978 can be dismantled for easy cleaning
CAPACITY ml
PP 125
PP 250
PMP 500
SOCKET mm
B19
B19
B29
CATALOGUE #
14810
14811
1K978
spatulas
General usage:
Transferring small amounts of powders
Material:
Stainless steel
Chattaway, double
Chattaway, micro
Chattaway, single
Nuffield
Nuffield HK
Spoon/flat
MICRO WEIGHING SET
Contents:
Features:
SIZE mm
150
210
150
130
140
150
●
●
●
●
CATALOGUE #
08073405
08073407
08073411
08073400
08073403
08073401
Forceps
Two double spatulas
Four spoon/spatulas
Pouch
Each piece 150mm long
CATALOGUE #
1B36705
VIBRATING SPATULA
Features:
PLASTIC
Material:
● Toothed thumb wheel causes vibration when moved
● Brown FEP coated tip to reduce sticking losses
Polyamide with fibre-glass filling
LENGTH mm
DOUBLE 150
SPOON/FLAT 180
CATALOGUE #
1K594
1K596
STIRRING SPATULA, POLICEMAN
Material:
Polypropylene
Features:
● Flattened ends.
● Length 245mm
CATALOGUE #
08828
650
splash heads
General usage:
To prevent carry-over of liquid splashes in distillations. Introduction of steam into flasks
Material:
Boro-silicate glass
Features:
●
●
●
●
Modifications:
● Length of arm
● Screwthread tubing connector
Operation:
Fits between a flask and a condenser
Standard 9mm tubing olives
Ground sockets and/or cones
Alternate socket and/or cone
Drip tip
CODE
VERTICAL SH17/23
SLOPING SH7/02
SH7/43
SH7/0/44
LONG ARM SH7/12
SH7/13
SH7/53
VACUUM
SH7/23/SC
SH7/25/SC
JOINTS mm
B19/B24
B19
B24
B29
B19
B24/B19
B24
B24/B19
B24/B19
B34/B19
CATALOGUE #
2417245
241734
241735
241736
2417444
2417454
2417455
2417554
2417645
2417745
spreader
General usage:
Spreading powders or gels over a surface
Material:
Boro-silicate glass
Features:
● Coat hanger shape
● 5 x 205 x 58mm
● Flame polished ends
CATALOGUE #
24301
springs
General usage:
Holding joints with hooks on glassware.
Material:
Boro-silicate glass
Features:
● Supplied in pairs
● Stretch
● Looped ends
SIZE mm
25
200
CATALOGUE #
0824107
08LS2006
651
staining jars & trays
General usage:
Holding microscope slides for staining
Material:
Soda-lime glass
Tray - boro-silicate glass
SIZE mm
COPLIN 45 x 100
HELLENDAHL 90 x 40 x 90
60 x 60 x 100
SCHIEFFERDECKER 90 x 70 x 40
STAINING TRAY + HANDLE 88 x 40 x 70
STORAGE BOX 108 x 90 x 70
Material:
CATALOGUE #
0523319
0523314
0523315
0523316
23317
23318
PMP(TPX))
SIZE mm
81 x 101 x 70
RACK (polypropylene)
HELLENDAHL 58 x 53.5 x 86
SCHIEFFERDECKER 85 x 70 x 50
79.6 x 92
STORAGE BOX
CATALOGUE #
1K353
1K354
1K355
1K351
1K1100
1K1101
stands
General usage:
Supporting of apparatus
Features:
●
●
●
●
The tripod stand is powder coated steel with a triangular top
The quadruped stand is made of chrome nickel and the top is recessed to receive a Ceran plate
The retort stand base is powder coated cast iron with a threaded hole to receive a stainless steel threaded rod
The electrode holder has a flexible arm with molded acetyl copolymer links and ball-and-socket joints. One end has a 12.7mm
diameter stainless steel pin for attachment to a clamp or base. The base has 13mm rod-holding wells with thumbscrews at the centre
of each edge
SIZE mm
TRIPOD
QUADRUPED
RETORT STAND 500
750
FLEXIBLE ELECTRODE HOLDER 23x16
FLEXIBLE ARM & BASE 460
CATALOGUE #
08080400
082907753
08080301
08080302
183152
183171
652
still heads
Alternate names:
Distillation heads
General usage:
Connecting flasks to condensers in distillation assemblies
Material:
Boro-silicate glass
Features:
● Ground sockets and/or cones
● The extra sockets on the 24180 and 24181 series allow the acceptance of dropping funnels, stirrers and thermometers etc.
Modifications:
● Alternate size socket and/or cone
● Screw thread inlet for thermometer
● Retaining hooks and springs
Accessories:
● Thermometer adapter
● Screwcap for thermometer
● Thermometer
CODE
RECOVERY SH1/11
SH1/22
SH1/23
SH1/33
SH1/44
VERTICAL RECOVERY SH2/11
SH2/22
SH2/23
SH2/33
B14 SOCKET INLET SH4/1
SH4/22
SH4/23
SH4/33
SH4/24
SH4/44
CLAISEN, SH6/1
B14 SOCKETS SH6/22
SH6/23
SH6/33
SH6/44
VIGREAUX, QD-3050
B14 SOCKETS
CLAISEN-VIGREAUX, QD-3040
B14 SOCKETS
CONES mm
B14
B19
B24 & B19
B24
B29 & B24
B29
B14
B19
B24 & B19
B24
B14
B19
B24 & B19
B24
B29 & B19
B29
B14
B19
B24 & B19
B24
29/32
B14
B19
B24 & B19
B24
B29
B14
B19
B29
B24
B29
CATALOGUE #
2417833
2417844
2417845
2417855
2417846
2417866
2417933
2417944
2417945
2417955
2418033
2418044
2418045
2418055
2418046
2418066
2418133
2418144
2418145
2418155
2418166
2418233
2418244
2418245
2418255
2418266
2418333
2418344
2418345
2418355
2418366
653
stirring rods
General usage:
Agitating and stirring of liquids
Material:
Boro-silicate glass
Features:
● Flame polished ends
● Rubber policeman on SR1805RT
Material:
SIZE mm
3 x 150
4 x 150
4 x 200
5 x 150
5 x 180
5 x 200
5 x 300
6 x 150
6 x 300
6 x 450
8 x 100
8 x 150
8 x 200
8 x 250
8 x 300
10 x 300
10 x 400
10 X 500
CATALOGUE #
SR1503
SR1504
SR2004
SR1505
SR1805RT
SR2005
SR3005
SR1506
SR3006
SR4508
SR8100
SR1508
SR2008
SR2508
SR3008
SR30010
SR40010
SR50010
SIZE mm
250 x 8
CATALOGUE #
804-97
PVC with metal core
stohlman flask
Alternate names:
Shaking flask
General usage:
Shaking apparatus.
Material:
Boro-silicate glass
Features:
●
●
●
●
Modifications:
● Alternate capacity
● Ground neck socket
Accessories:
● Rubber bung
Ring mark at 500ml
Beaded rim
Long neck 24mm id
Flat bottom
CATALOGUE #
2411944
654
stopcocks
Alternate names:
Taps
Material:
Boro-silicate glass
General usage:
Releasing liquids from vessels and flow-closing or reduction in air and water lines in apparatus assemblies
Features:
● Glass barrel - ground for glass key, polished for PTFE key
● Keys of same size barrels are interchangeable
Modifications:
Tubes can be bent to suit application
SINGLE, GLASS KEY, 12.5/2.5
SINGLE, GLASS KEY, 14.5/2.5
SINGLE, GLASS KEY, 14.5/4
SINGLE, GLASS KEY, 18.8/6
SINGLE, PTFE KEY, 12.5/2.5
SINGLE, PTFE KEY, 14.5/2.5
SINGLE, PTFE KEY, 14.5/4
SINGLE, PTFE KEY, 18.8/4
HIGH VACUUM, GLASS KEY
DOUBLE OBLIQUE, GLASS KEY, 14.5/2.5
DOUBLE OBLIQUE, GLASS KEY, 18.8/4
DOUBLE OBLIQUE, PTFE KEY, 14.5/2.5
DOUBLE OBLIQUE, PTFE KEY, 18.8/4
THREE WAY (T), GLASS KEY, 18.8/2.5
THREE WAY (T), PTFE KEY, 18.8/2.5
SPINDLE VALVE, GU, 0-2.5
SPINDLE VALVE, GU, 0-4
SPINDLE VALVE, VACUUM, 0-4
CATALOGUE #
042864036
042864048
042864054
042864072
042864128
042864134
042864136
042864138
042864106
042864228
042864250
042864242
042864256
042864184
042864198
042860585
042860586
042860568
stoppers - glass
Material:
Solid: soda-lime glass
Hollow: boro-silicate glass
Features:
Ground cone
SIZE mm
B7
B10
B12
B14
B19
B24
B29
SOLID CLEAR
CATALOGUE #
082162401
082162402
082162404
082162406
082162407
082162408
082162409
SOLID AMBER
CATALOGUE #
HOLLOW CLEAR
CATALOGUE #
082162706
082162707
082162708
05243042
05243043
05243044
05243045
05243046
655
stoppers - plastic
Material:
Polypropylene
Features:
● Ridged shank
● Hexagonal grip top
SIZE mm
B10
B12
B14
B19
B24
B29
B34
B45
TUBING CONNECTORS B29
CATALOGUE #
08906-94
08907-94
08908-94
08908-94
08910-94
08911-94
08912-94
08913-94
1K1816
stoppers - rubber
Alternate names:
Bungs
Material:
Natural rubber except the *grey which are silicone rubber
Sizes:
The diameter of the bottom of the bung is given first followed by the top measurement and then the length
SIZE mm
5x7x16
7x10x20
8x10x20
9x13x20
11x13x20*
11x13x20
11x14x25
13x16x25
15x18x25
17x21x25*
17x21x25
19x23x28
21x25x28
23x26x28
25x28x26
19X26x28
31x36x35
32x37x35
28x37x37
37x42x42
37x48x50
52x65x70
CATALOGUE #
08SRR050816
08SRR071020
08SRR081020
08SRR091320
08SRG111320
08SRR111320
08SRR111419
08SRR131625
08SRR151825
08SRG172125
08SRR172125
08SRR192328
0872613
08SRR293332
08SRR252826
1K1138
08SRR334136
08SRR354535
1K1142
08SRR374242
1K1145
1K1148
656
storage bottles - plastic
General usage:
Storage of laboratory reagents
Material:
Polyethylene
Features:
Screwcap
WIDE MOUTH
ROUND
CAPACITY ml
25
50
100
250
500
1000
1500
2000
CATALOGUE #
06WM50
0693489
06WM250
06WM500
06WM1000
06WM1500
06WM2000
WIDE MOUTH
ROUND
GRADUATED
CATALOGUE #
SQUARE
GRADUATED
CATALOGUE #
1K408
1K409
1K410
1K411
1K412
0609-89
06924-89
06926-89
06927-89
06928-89
1K413
NARROW MOUTH
SQUARE
GRADUATED
1K608
1K609
1K610
1K611
1K612
1K613
NATURAL
5010024
5025038
5050038
5100038
1K614
sugar flasks
General usage:
Analysis of sugar solutions in a dilution of 1 in 10
Material:
Boro-silicate glass
Features:
●
●
●
●
Modifications:
● Addition of ground socket
Accessories:
● Rubber bung
● Cleaning brush
Beaded rim
Long neck
Flat bottom
Ring marks at volume level and 10% more for correct dilution
CAPACITY ml
100
200
CATALOGUE #
24114100
24114200
657
swabs
General usage:
Cleaning and sample taking
Features:
● Plastic stick with cotton bud tip
● Stick attached to closure for transport swab
● Tube for transport swab
PACK SIZE
PLAIN 100
TRANSPORT 50
CATALOGUE #
F155K
F165C
syringes
General usage:
Injection or extraction through a septum
Material:
Plastic
Pack size:
100
Accessories:
● Needles
SIZE mm
2/3
5
10
20
50
NEEDLES 18g
CATALOGUE #
600902
600905
600910
600920
600950
81815
tablet tubes
Alternate names:
Pill or polytop vials
Features:
● Push in plastic stoppers for glass tubes
● Hinged caps on plastic tubes
APPROXIMATE
CAPACITY ml
7
10
11
20
25
30
35
50
75
100
DIAM. x LENGTH
mm
50 x 15
50 x 18
60 x 18
50 x 25
60 x 25
75 x 25
90 x 25
PACK SIZE
100
100 & 1000
100
100 & 1000
100
100 & 1000
50
1000
500
500
GLASS
CATALOGUE #
T1000
T1001
T1002
T1003
T1004
T1005
T1006
PLASTIC
CATALOGUE #
3010491
3020491
3030491
3050491
3075491
3100491
658
test sieves
General usage:
Separation of solids from water
Material:
Stainless steel
Features:
● 200mm diameter
● Supplied with certificate
Accessories:
●
●
●
●
●
Adapter
Receiver
Lid
Separating pan
Wet wash receiver
MESH SIZE
MICRON MESH 20
25
32
38
45
53
63 & 75
90 to 850
MILLIMETER MESH 1 to 3.35
4 to 19
ADAPTER
RECEIVER
LID
SEPARATING PAN
WET WASH RECEIVER
MICRO SIEVE SET
Material:
CATALOGUE #
6020
6025
6032
6038
6045
6053
6375
6400
6490
6500
7201
7202
7203
7204
7205
● Polypropylene
● Phosphor-bronze mesh inserts
Contents:
●
●
●
●
●
Features:
● The holding sections are 55.9mm I.D. x 41mm high with a capacity of about 60ml
● The complete stack with basin and cover is 72.1mm maximum O.D. x 216mm high
Spares:
Pack of 8 mesh inserts
Operation:
The sections unscrew easily for changing mesh inserts or cleaning thoroughly, and
screw together snugly to lock the mesh in place
CATALOGUE #
SIEVE 37845
Four interchangeable screen holding sections
Catch pan
Cover
Four screen retaining rings
Eight phosphor-bronze mesh inserts, one each of eight sizes:
25, 35, 45, 60, 80, 120, 170 and 230 linear openings per inch
mesh
659
test tubes - glass
Alternate names:
Boiling tubes
General usage:
Simple experiments for qualitative chemical analyses. Rimmed test tubes should be used for frequent pouring or shaking
Features:
● Flame-polished rim
● Round bottom
Pack sizes:
● Soda-lima & neutral glass in packs of 100 *pack of 80
● Boro-silicate glass in packs of 10
Accessories:
●
●
●
●
Rubber bung
Plastic cap
Cleaning brush
Holder
Soda-lime test tubes are not recommended for heating
RIMLESS
APPROX. CAP. ml
6
8
10
12
15
18
19
20
20
30
40
45
50
DIAM. X LENGTH mm
10 x 75
12 x 75
12 x 100
15 x 88
15 x 100
16 x 100
16 x 125
16 x 150
18 x 100
18 x 150
20 x 150
24 x 125
24 x 150
NEUTRAL
CATALOGUE #
05TT1075N
05TT1275N
05TT12100N
SODA-LIME
CATALOGUE #
05TT1075S
05TT1275S
BORO-SILICATE
CATALOGUE #
05TT1588S
05TT15100S
05TT16100N
05TT16125N
05TT16150N
2419116100
2419116125
2419116150
2419118100
2419118150
2419120150
05TT18150N
05TT20150N
05TT24125N
05TT24150N
2419124150
RIMMED
APPROX. CAP. ml
15
18
19
20
20
30
40*
50*
DIAM. X LENGTH mm
15 x 100
16 x 100
16 x 125
16 x 150
18 x 100
18 x 150
20 x 150
24 x 150
CAPS
Material:
Polyurethane
Pack size:
100
NEUTRAL
CATALOGUE #
SODA-LIME
CATALOGUE #
05TT15100SR
2419216100
2419216125
2419218100
2419218100
2419218150
2419220150
2419224150
05TT16125NR
05TT16150NR
05TT20150NR
05TT24150NR
FOR TUBE SIZE mm
12
16
18
24
30
35
40
BORO-SILICATE
CATALOGUE #
CATALOGUE #
1K650
1K651
1K654
1K655
1K656
1K657
1K658
660
test tubes - plastic, single use
Material:
Polypropylene
Features:
● Coloured screw caps: 1K88 series - red, blue, yellow or white caps
● Conical bottoms on the 1K84 series
Pack sizes:
●
●
●
●
CAPACITY
15ml
15ml
50ml
SIZE
16 x 100mm
17 X 120mm
30 X 115mm
1K84000
1K84002
1K88303
1K88304
& 1K84001 - 100
& 1K84003 - 150
- 1000
- 100
CATALOGUE #
STERILE
CATALOGUE #
1K84000
1K84002
1K84001
1K84003
RACKS CAPACITY & SIZE
POLYPROPYLENE COLLAPSIBLE 55 x 16mm
& STACKABLE 55 x 18mm
40 x 20mm
IN-LINE 10 x 16mm
9 x 18mm
8 x 20mm
BASE PLATE 156x202mm
BOX 12 x 21mm
24 x 21mm
HOLE 'n PEG 12
WOOD
CATALOGUE #
1K88303
STERILE
CATALOGUE #
1K88304
CATALOGUE #
063191940
063192940
063193940
IK130
IK131
IK135
1K134
1K560
1K562
08TTR6H6P
08080200
Material:
Spring steel with wooden handle
HOLDER
CATALOGUE #
08087700
BRUSH
CATALOGUE #
08072950
661
thermometers
General usage:
Ascertaining temperatures
Features:
● Solid 6-7mm stem, calibrated for total immersion
● Yellow enamel backing
0
RANGE C/TYPE
-10 to + 50/60
-10 to + 110
-10 to + 150
-10 to + 250
-10 to + 360
-40 to + 50 max/min
Soil
MERCURY
CATALOGUE #
08MT050
08MT110
08MT150
08MT250
08MT360
08MMT3050
RED SPIRIT
CATALOGUE #
08ST050
08ST110
08ST150
08ST80S
thimbles
General usage:
In a soxhlet extractor when it is required that the extracted material be weighed
Material:
Boro-silicate glass
Features:
● Sintered disc
● Flame polished rim
Order requirements:
Porosity of sintered disc
Operation:
The thimble is slid into a soxhlet extractor that has a B34, or bigger, socket
SIZE mm
26 x 95
36 x 95
CATALOGUE #
240902
240903
662
tilt measures
Alternate names:
Kipp's measures
General usage:
Dispensing fixed amounts of liquid
Material:
Boro-silicate glass
Features:
● B24 ground cone
Set:
● Body
● GL32 screwcap
● Inner bulb measures
Modifications:
● Screw cap instead of ground cone
● Alternate size ground cone
● Hooks for retaining springs
CAPACITY ml
1
2
5
10
15
20
25
30
40
50
SET 2, 5 & 10
20, 25 & 30
40 & 50
CATALOGUE #
052400102
052400104
052400106
052400108
052400109
052400111
052400112
052400113
052400114
052400117
2400300
2400400
2400500
timers
Features:
●
●
●
●
●
●
LCD display
Count down and up to 99 minutes
Memory storage
08220 has mode select and clock
Battery
Magnet
CATALOGUE #
08221
08220
663
tubing
General usage:
Generally for air and water lines in apparatus assemblies
Accessories:
● Connectors
● Tubing clamps
Pack size:
15 meter roll
ID x OD mm
LATEX 5 x 10
6 x 10
6 X 11
6 x 13
SILICONE 4 x 7
5x8
6 x 10
6 X 11
8 x 11
PVC 3 x 5
8 x 11
NATURAL RUBBER: Red 8 x 11
Orange 8 x 12
NITRILE 8 x 12
JOINERS
Material:
Boro-silicate glass
Features:
For 8mm id tubing
Material:
Polypropylene
CATALOGUE #
08202L
08203L
08204L
08206L
08200AS
08201S
08203S
08204S
08205S
08200P
08205P
0670019
1K3865
0680019
CATALOGUE #
042860222
TUBING ID mm
DISCONNECTOR 6-7-8
8-9-10
CONNECTOR 6-7-8
8-9-10
Y CONNECTOR 6
ADAPTERS 4-6-8/10-12
4-6-8/12-14-16
8-10-12/14-16
CATALOGUE #
1K435
1K436
1K511
1K512
1K465
1K877
1K878
1K879
SCREWTHREAD & KECK QUICK CONNECTORS
DETACHABLE: Straight
Bent
KECK:
suction kit
adapter for Buchner flask
CLAMPS
Material:
CATALOGUE #
2924704
2924705
042863431
042863450
Stainless steel
CATALOGUE #
HOFFMAN 86902
MOHR 86910
664
vacuum drying pistol
General usage:
Distillation apparatus assemblies
Material:
Boro-silicate glass
Components:
●
●
●
●
●
Modifications:
● Tubing screw thread connection
● Hooks for retaining springs
Order requirements:
● Sizes of sockets and cones
● Stopcock key
Two round bottom flasks
Still head
Stopcock/tubing adapter
Jacketed drying tube
Reversible coil condenser
CATALOGUE #
ZGA020012
vigreux flasks
General usage:
Distillation apparatus assemblies
Material:
Boro-silicate glass
Features:
●
●
●
●
Modifications:
● Alternate ground sockets and cone
● Hooks for retaining springs
Pear shape flask
Fractionating column
B14 ground neck socket and
Side ground cone
CAPACITY ml
25
50
100
CATALOGUE #
24200025
24200050
24200100
665
viscometers
General usage:
Obtaining kinematic viscosities of liquids
Material:
Boro-silicate glass
CATALOGUE #
24270
24271
24272
24273
BSU REVERSE FLOW
CANNON-FENSKE OPAQUE
CANNON-FENSKE ROUTINE
UBBELOHDE
volatile oil traps
General usage:
Oil separation at the end-stage of a distillation assembly
Material:
Boro-silicate glass
Features:
● Ground cones and sockets
● Stopcock with choice of glass or PTFE key
Order requirements:
● Sizes of sockets and cones
● Stopcock key
CATALOGUE #
24063
BRANIGAN 24242
volume dispensers
General usage:
Dispensing measured amounts of liquids
Material:
Polyethylene and polyurethane
Features:
●
●
●
●
Reservoir bottle
Graduated dispenser
Screwcap
Dispensing tube
CAPACITY
250ml
500ml
1000ml
25ml DISPENSER
CATALOGUE #
K1475
K1476
K1477
50ml DISPENSER
CATALOGUE #
K1480
K1481
K1482
666
volumetric flasks - glass
General usage:
Making up and storage of liquids to a fixed volume
Material:
Boro-silicate glass
Features:
●
●
●
●
●
●
Modifications:
● Amberise
Accessories:
● Glass stopper
● Cleaning brush
Class A
º
Calibrated to contain for a reference temperature of 20 C
Ground neck socket
Ring mark at volume level
Enamel markings
Plastic stopper
CAPACITY ml
5
10
20
25
50
100
200
250
500
1000
2000
5000
NECK mm
B7
B7
B10
B10
B12
B14
B14
B14
B19
B24
B29
B34
SCREW THREAD NECK
Features:
Red PBT screwcap
CAPACITY ml
20
25
50
100
200
250
500
1000
2000
5000
WHITE MARKINGS
CATALOGUE #
0521678070
0521678080
0521678120
0521678140
0521678170
0521678250
0521678320
0521678360
0521678440
0521678540
0521678630
0521678730
BLUE MARKINGS
CATALOGUE #
NECK
GL14
GL14
GL18
GL18
GL18
GL18
GL24
GL32
GL32
GL32
CATALOGUE #
21678129
21678149
21678179
21678259
21678329
21678369
21678449
21678549
21678639
21678739
05732005
05732006
05732007
05732008
05732009
CONFORMITY
CERTIFIED
CATALOGUE #
052820152
052820160
052820165
052820170
052820175
052820180
052820185
052820186
052820190
052820193
052820194
667
volumetric flasks - plastic
Material:
Polypropylene
Features:
●
●
●
●
●
CAPACITY ml
25
50
100
250
500
1000
NECK
GL18
GL18
GL18
GL25
GL25
GL25
Material:
Polypropylene and PMP (TPX)
Features:
º
● Calibrated to contain for a reference temperature of 20 C
● Ring mark at volume level
● Stopper
CAPACITY ml
25
50
100
250
500
1000
NECK
B14
B14
B14
B19
B19
B19
Class B
º
Calibrated to contain for a reference temperature of 20 C
Ring mark at volume level
Screw thread neck
White screwcap
POLYPROPYLENE
CATALOGUE #
1K1430
1K1431
1K1432
1K1433
1K1434
1K1435
POLYPROPYLENE
CATALOGUE #
1K1484
1K1485
1K1486
1K1487
1K1488
1K1489
PMP (TPX)
CATALOGUE #
1K2490
1K2491
1K2492
1K2493
1K2494
PMP (TPX)
CATALOGUE #
CLASS A CERTIFIED
CATALOGUE #
1K2485
1K2486
1K2487
1K2488
1K2489
0667304
0667404
0667504
0667604
wash bottles
Material:
Polyethylene
Features:
● Screwcap
● Goose-neck tube
Accessories:
GL25 vent-cap for 500ml
CAPACITY ml
50
100
250
500
1000
NARROW NECK
CATALOGUE #
1K179
1K180
1K182
06950-88
1K185
COLOURED 500ml
RED
CATALOGUE #
061327-03
GREEN
CATALOGUE #
061327-05
CATALOGUE #
VENT CAP 06833019
WIDE NECK
CATALOGUE #
INTEGRAL
CATALOGUE #
1K1637
1K1638
1K1633
1K1634
YELLOW
CATALOGUE #
061327-06
BLUE
CATALOGUE #
061327-08
668
wash bottles - solvent
Material:
Polyethylene
Features:
●
●
●
●
Accessories:
GL25 vent-cap
Screwcap
Goose-neck tube
500ml
Imprint of solvent
DISTILLED WATER
ACETONE
METHANOL
ISOPROPANOL
ETHYLACETATE
ETHANOL
METHYLENE CHLORIDE
DIMETHYLFORMAMIDE
n-HEPTANE
n-HEXANE
PETROLEUM ETHER
TOLUENE
XYLENE
ACETONITRILE
ACETIC ACID
METHYLETHYLKETONE
VENT CAP
CATALOGUE #
06133281
06133282
06133283
06133284
06133285
06133286
06133287
06133288
06133289
06133290
06133291
06133293
06133294
06133295
06133296
06133297
06833019
washing head
Alternate names:
Sprayer head
General usage:
Fitting to ground necks of bottles and flasks
Material:
Boro-silicate glass
Features:
B24 ground cone
Operation:
Forcing air into the pipe expels the washing liquid or solvent from the spout
CATALOGUE #
240255
669
watch glasses
General usage:
Evaporation work. Cover for beakers and Erlenmeyer flasks for return of condensation
Features:
● Glass: flame-polished edge
● Polypropylene: base
Soda-lime glass is not recommended for heating
DIAMETER mm
50
60
70
80
90
100
125
150
200
BORO-SILICATE
CATALOGUE #
0521321320
0521321340
0521321410
0521321460
0521321520
0521321570
0521321610
SODA-LIME
CATALOGUE #
05797201
05797202
05797203
05797204
05797210
05797205
05797206
05797208
05797209
POLYPROPYLENE
CATALOGUE #
1K454
1K455
weighing boats
Alternate names:
Weighing scoops
General usage:
Weighing of small amounts of powders and emptying into vessels
Material:
Boro-silicate glass
Features:
Flame polished edges
CAPACITY ml
2
3
4
5
6
10
20
50
55
60
CATALOGUE #
2402802
2402803
2402804
2402805
2402806
2402810
2402820
2402850
2402855
2402860
CAPACITY ml
1.25
2.5
5
8
20
CATALOGUE #
1B367401
1B367402
1B367403
1B367404
1B367405
SINGLE USE
Material:
High impact polystyrene
Pack size:
100
670
weighing jars
Alternate names:
Weighing bottles
General usage:
Weighing of substances on analytical scales. Storage of samples and specimens
Also used as moisture crucibles
Features:
Air-tight lid
Material:
Boro-silicate glass
Remove lids before autoclaving
CAPACITY ml
5
15
30
80
LOW FORM
DIAM. x HEIGHT mm
28 x 25
38 x 30
54 x 30
85 x 30
Material:
Polypropylene
CATALOGUE #
052421013
052421023
052421032
052421041
TALL FORM
DIAM. x HEIGHT mm
28 x 40
32 x 50
38 x 70
44 x 80
CATALOGUE #
052421113
052421118
052421123
052421124
CAPACITY ml
20
23
30
50
60
190
360
DIAM. x HEIGHT mm
40 x 29
30 x 48
49 x 29
59 x 34
40 x 69
59 x 88
70 x 118
CATALOGUE #
1K342
1K340
1K345
1K346
1K343
1K347
1K348
weighing pipettes
Alternate names:
Lunge-Rey pipettes
General usage:
Weighing or sampling of fuming or corrosive liquids
Material:
Boro-silicate glass
Features:
● Stopcock with choice of glass or PTFE key
● B10 ground cone
Accessories:
● Matching cover flask
● Matching cover tube
Order requirements:
Stopcock key
CAPACITY ml
>10
Cover tube or flask
CATALOGUE #
24029
24089
671
wire gauze
General usage:
On tripod for even distribution of heat and avoidance of soot
Material:
Galvanised wire mesh with ceramic centre
SIZE mm
150 x 150
CATALOGUE #
0807330
witt filtration unit
General usage:
Specialised vacuum filtration
Material:
Boro-silicate glass
Components:
●
●
●
●
●
Reaction vessel
Flat flange lid with ground socket
Quick release clip (not shown)
Tubing screw thread connection
Quick connect tubing adapter
CATALOGUE #
052473046
woulff bottles
General usage:
Washing gas in apparatus assemblies and in a train
Material:
Boro-silicate glass
Features:
Two or three ground necks of equal size
Modifications:
● Addition of stopcock at base
● Alternate ground socket sizes
Accessories:
● Stoppers
CAPACITY ml
100
250
500
1000
2000
NECK
B14
B19
B19
B24
B29
TWO NECKS
CATALOGUE #
24278024
24278364
24278445
24278545
24278636
THREE NECKS
CATALOGUE #
24279024
24279364
24279445
24279545
24279636
672