A P P E N D I X
A
Cisco TelePresence System 1100 Shipping Pallet
Size, Weight, and Description of Contents
Revised: July 20, 2011, OL-19695-01
The following chapter provides you with the dimensions of the pallet the contains the cartons for the
Cisco TelePresence System 1100 (CTS 1100).
The pallet size is 87 inches x 47.75 inches x 63.125 inches (220 cm x 121.3 cm x 160.3 cm). The pallet
weight is 826 pounds (375 kilograms).
After unpacking, the largest carton (the carton for the light reflector) is 83 3/4 inches x 60 inches x 9 1/8
inches (213 cm x 152 cm x 24 cm). The size of the light reflector without its packaging, which is the
largest system component, is 80 1/4 inches x 57 inches x 7 1/4 inches (204 cm x 145 cm x 18 cm).
Each carton has a round blue label approximately 4 inches (10 cm) wide. This label has number and a
carton ID. Table A-1 provides you with a list of the contents of each carton.
Table A-1
Contents of Cartons by Carton Number
Carton Number
Carton ID
Description of Contents
1
CTS1100-ACC-KIT
53-3322-01
Microphones, attachment hardware (screws, washers, and
other fasteners), written documentation
2
CTS-1300STRUCTURE
Mounting bracket, display mounting plate, and associated
attachment hardware for the bracket and plate
3
CTS1100-CAB
Cabinet
4
CTS1100-LIGHTSTR
Light Structure
5
CTS-DISP-CTSGEN3
Display
6
CP-7975G-CTS
Cisco Unified IP Phone
7
CTS-CODEC-PRI-G2 Codec
8
CTS1300-65-BZL
9
CTS1300-SPKR-COV Speaker cover
10
CTS1300-CAB-COV
Cabinet cover
11
CTS1100-CAM
Camera cluster
Bezel
Cisco TelePresence System 1100 Assembly, First-Time Setup, and Field Replaceable Unit Guide
OL-19695-01
A-1
Appendix A
Table A-1
Cisco TelePresence System 1100 Shipping Pallet Size, Weight, and Description of Contents
Contents of Cartons by Carton Number
Carton Number
Carton ID
Description of Contents
12
CTS-CAM-TOOL-G2 Large and small camera target and easel
13
CTS1100-ACC-KIT
Cable cover and cable routing guide
Cisco TelePresence System 1100 Assembly, First-Time Setup, and Field Replaceable Unit Guide
A-2
OL-19695-01