Assembly instructions: Table Tennis Table Infinity Paper craft
Preparation
●cutter ●wood glue (quick dry) ●double-sided tape (5mm width) ●tweezers ●bamboo skewer
【Assembly tips】
【How to stick double-sided tape】
Following tips are basic techniques for the assembly.
1. To avoid losing or missing parts, and also for your conformation of the parts, make a duplication of the parts sheets to the
1
thick papers.
2
3
2. Write parts numbers to the reverse side of the parts.
3. Before starting the assembly, apply the double-sided tapes to the sticking margins with green characters.
4. Look at the photographs carefully. Find out whether it is mountain fold or valley fold, and fold the lines.
5. Before attaching the parts permanently, make sure to find out which parts goes where by assembling the parts
temporarily.
6. Apply the wood glue to the sticking margins with red characters.
7. The parts with light blue characters, carefully find out the up and the down sides when they are glued. For the parts with
1. Apply double-sided tape to
purple characters, fold it half and glue together.
2. Cut the double-sided
a sticking margin.
8. Hold the parts firmly until either glue dried or tape is stuck.
3. Peel a back sheet and apply the
tape along to the
tape.
shape of the margin.
9. Painting with similar colors to the cross-sections of the parts makes the final looks better.
Make a valley fold
Apply the double-sided tapes to the sticking
Apply the wood glue to the sticking margins
The parts with purple characters,
along to the red line.
margins with green characters.
with red and light blue characters.
fold it half and glue together.
1, a-1, etc.
●, A, etc.
connections
Step1 Table top assembly
6
Step1-1
Step1-2
①
3
Step1-3
Step1-4
1
5
①
4
2
7
②
①
②/③
②
③
8
1. Make valley fold on the sticking margin of ①, and fold it in half. It will
3. After gluing the assembled ① and ② at 1, glue ③
become a shape like T upside-down.
and a net.
⑨
Step2 Frame assembly
E
together.
⑦
Step2-3
1
A
2
Step3-1～2
⑭
B
4
④
Step3 Legs assembly
assembled frame, glue them
C
C
Step2-1～2
3. Insert in order of A to F of the
E
5
3
4. Fold all the ends and glue 5~8 together.
and the parts 2~4 together to make a table top
2. Fold ② in half, and gluing together. Do same for ③.
⑥
④
1. After gluing 1~5 of ④ together, apply glue on ● and glue together
like closing a lid. Do same on ■、★、◯、□、☆.
2. After gluing 1 of ⑤~⑩ together, apply glue on ● and glue together
⑤
⑧
D
d-2 d-3 d-4
d-5
d-6
⑬
F
d-17
⑩
F
Step2-4
⑪
d-1
D
like closing a lid. Do same on ◯.
⑫
b-1〜18
d-16 d-15
a-2
a-4 a-3
a-1
a-7
a-8
a-9
a-10
a-11
a-12
a-13
a-14
a-15
⑬
a-16
a-18
a-17
Step3-3
d-7
d-8
d-9
d-10
d-11
d-12
d-13
d-14
a-5
a-6
⑮
c-1〜17
⑭
1. Glue a-1 of ⑫ and a-2~17 of ⑬ together and then glue a-18 of ⑫ for the final.
4. Apply a double-sided tape to the reverse side of ⑪. Put a bamboo
2. Do almost same as above. Glue b-1 of ⑫ and b-2~17 of ⑬ together and then glue
skewer and roll it. If there is remaining part, cut it out.
b-18 of ⑫ for the final.
3. Turning it upside-down, and glue c-1~17 of ⑭⑮ and d-1~17 of ⑬⑮ together.
Step3-7
Step3-8
e-1
e-2
Step3-4～5
e-3
e-4
⑯
5
e-11
e-5 e-6
e-7 e-8 e-9 e-10
e-14
e-13
e-12
♠
♠
15
7
♠
Step5 Stage assembly
16
8
♠
♠
14
6
♠
♠
⑱/⑲
13
♠
♠
●
●
●
♠
㉙
⑰ f-1〜13
3
4
e-28
e-27
e-26
Step3-6
e-25
⑯
e-24 e-23 e-22 e-15 e-16 e-17
f-21〜27
⑰
e-21
e-20
e-19
e-18
㉘
㉚
1
7. Apply glue to the sticking margins of ♠♦♥♣, and glue
together like closing a lid.
2
Step5-1～3
8. After gluing 1~4, 5~8, 9~12, and 13~16 of ⑱ together, apply
f-14〜20
4. Glue the assembled part and e-1~14 of ⑯ together in order.
5. Turning it upside-down, and glue e-15~21 and e-22~28 of ⑯
together in order.
6. Do almost same as above. Turning it upside-down, and glue
f-1~13, f14~20 and f-21~27 of ⑰ together in order.
glue on ● and close it like lid. Do almost same to assemble ⑲,
and glue legs and light blue character of ⑱⑲ together by
aligning up and down sides.
1. After folding all four ends of ㉘ in half and glue them, glue
1~4 to make it like a box.
2. After folding both ends of ㉙ in half, glue ㉚ to the reverse
side of ㉙.
3. Align the light blue characters and glue the assembled parts
Step4 Table assembly
together.
Step4-4
Step4-1～3
Step5-4
1. Do same as left
leg. Assemble
⑳～㉗ of right leg.
2. Put a bar made with bamboo skewer
between both assembled legs and
connect them.
3. Apply glue on legs and aim to ◎ on the
frame, and glue them together.
4. Align the assembled frame
and table top with light blue
characters, and glue them
together.
4. Display the completed table on the stage.