PRODUCT-INFORMATION AND USER INSTRUCTIONS
ANTI-GRAFFITI "24-7"
Anti-Graffiti 24-7 leaves an invisible film that
prevent graffiti and ink to harden underneath the
ANTI-GRAFFITI layer. Works also as a dirt and
water repellent.
ADVANTAGES:
- for treatment of all surfaces which
tolerates water
- protects surfaces such as facades, walls
and doors against graffiti
- after protection, the graffiti is easily
removed with hot water
DOSAGE:
Water absorbent surfaces: Undiluted approx. 1 ltr.
pr. 10 m2
Smooth surfaces: Undiluted approx. 1 ltr. pr. 20 m2
Curing time depends on temperature and humidity.
IMPORTANT: Shake well before use.
pH value: 6-7
NOTE!
USER
INSTRUCTIONS:
MANUAL:
Spray the cleaned and preferably dry surface with
undiluted ANTI-GRAFFITI 24-7. Use an electric paint
sprayer. (We recomend Wagner ProSpray 3.20) After
applying the product must harden up before it is
exposed to rain.
ANTI-GRAFFITI 24-7 can be removed by alkaline
detergent and hot water. Graffiti on the treated surfaces
can be removed with hot water. In some cases,
pre-soaking of the graffiti with "GRAFFITI-FJERNER
STÆRK" may be necessary. After cleaning of graffiti,
the surface need to be sprayed with ANTI-GRAFFITI
24-7 again.
OBS! very humid building surfaces (new construction
or prolonged heavy rain) can, due to the water
pressure inside, cause the surface to become whitish.
This will disappear when the excess water disappears.
Very absorbent surfaces may advantageously be given
building silicone before applying.
PACKAGING:
No aggressiveness. Untreated iron may be due
to rust because of the moisture content in
Anti-Graffiti 24-7.
APPROVALS:
5 ltr. plastic container (108 pieces/pallet)
SAFETY:
REVISION:
14/10-2016/gk
ITEM NO.:
53018
Knud E. Dan A/S PHONE +45 43 69 24 22 I Idé-Kemi ApS PHONE +45 75 81 56 22 I www.knudedan.dk