AUTOCAD
INSTRUCTOR: VICTOR M. CORONA, AIA
College of the Canyons - ARCHT 160
ELECTRICAL SYMBOLS
OUTLET SYMBOL
3/32" RADIUS CIRCLE
2-9/32" LONG LINES WITH
A 3/64" SPACE BETWEEN
SWITCHED OUTLET SYMBOL
3/32" RADIUS CIRCLE
2-9/32" LONG LINES WITH
A 3/64" SPACE BETWEEN
QUADPLEX OUTLET SYMBOL
3/32" RADIUS CIRCLE
4-9/32" LONG LINES WITH
A 3/64" SPACE BETWEEN
TELEPHONE SYMBOL
TRIANGLE INSCRIBED IN A 3/32" RADIUS CIRCLE
CABLE OUTLET SYMBOL
1/8" HIGH TEXT
1
8
"
C
SQUARE CIRCUMSCRIBED IN A 3/32" RADIUS CIRCLE
SWITCH SYMBOL
1/8" HIGH TEXT
S
1/4" LONG LINE
JUNCTION BOX SYMBOL
1/8" DIAMETER CIRCLE
J
3/32" HIGH TEXT
1.
CREATE THE ABOVE BLOCKS W/ TEXT (NOT ATTRIBUTES) AND INSERT THEM INTO YOUR DRAWING
PER THE ATTACHED PLAN
2.
USE TEXT STYLE
NO. 2 IN YOUR DRAWING FOR ALL TEXT ON THE SYMBOLS
3.
USE A SPLINE FOR THE DASHDOT2 LINETYPE FOR THE OUTLET SWITCHING
AUTOCAD 2004
INSTRUCTOR: VICTOR M. CORONA, AIA
College of the Canyons - DAT 264 AutoCAD for Architecture and Interior Design
LIGHT FIXTURE SYMBOLS
LOW VOLTAGE SYMBOL
3/16" SQUARE
3/16" DIAMETER CIRCLE WITH A 1/16" DONUT
DOWNLIGHT SYMBOL
3/16" DIAMETER CIRCLE WITH A 1/16" DONUT
PENDENT LIGHT FIXTURE
1/4" DIAMETER CIRCLE
3/16" DIAMETER CIRCLE
EXHAUST FAN SYMBOL
1/4" SQUARE WITH TWO CIRCLES
JUNCTION BOX LIGHT
1/8" DIAMETER CIRCLE
J
3/32" HIGH TEXT
3/32" RADIUS CIRCLE
SMOKE DETECTOR SYMBOL
3/32" RADIUS CIRCLE
SD
3/32" HIGH TEXT
DOWNLIGHT AT WET LOCATION
3/32" RADIUS CIRCLE
3/32" SQUARE
FLUORESCENT LIGHT STRIP
1/16" RADIUS CIRCLE
3/8" LONG LINE W/ 1/16 CROSS TAIL
MOTION SENSOR
M
1/8" DIAMETER CIRCLE W/ 5/64" HIGH TEXT
1.
CREATE THE ABOVE BLOCKS W/ TEXT (NOT ATTRIBUTES) AND INSERT THEM INTO YOUR DRAWING
PER THE ATTACHED PLAN
2.
USE TEXT STYLE
3.
USE A SPLINE FOR THE DASHDOT2 LINETYPE FOR THE LIGHT SWITCHING
NO. 2 IN YOUR DRAWING FOR ALL TEXT ON THE SYMBOLS
AUTOCAD 2004
INSTRUCTOR: VICTOR M. CORONA, AIA
College of the Canyons - DAT 264 AutoCAD for Architecture and Interior Design
AUTOCAD
INSTRUCTOR: VICTOR M. CORONA, AIA
College of the Canyons - ARCHT 160
ELECTRICAL SYMBOLS
LIGHT FIXTURE SYMBOLS
AUTOCAD
INSTRUCTOR: VICTOR M. CORONA, AIA
College of the Canyons - ARCHT 160
BLOCKS & ATTRIBUTES
LOW VOLTAGE SYMBOL
OUTLET SYMBOL
3/16" SQUARE
ELEVATION & SECTION REFERENCE
3/32" RADIUS CIRCLE
3/16" DIAMETER CIRCLE WITH A 1/16" DONUT
2-9/32" LONG LINES WITH
A 3/64" SPACE BETWEEN
DOWNLIGHT SYMBOL
1/8" HIGH ATTRIBUTES
2
A-1
1/2" DIAMETER CIRCLE
SWITCHED OUTLET SYMBOL
3/16" DIAMETER CIRCLE WITH A 1/16" DONUT
3/32" RADIUS CIRCLE
PENDENT LIGHT FIXTURE
SECTION TAIL
2-9/32" LONG LINES WITH
A 3/64" SPACE BETWEEN
1/4" DIAMETER CIRCLE
1/4" HIGH X 1/8" WIDE RIGHT TRIANGLE
QUADPLEX OUTLET SYMBOL
3/16" DIAMETER CIRCLE
DOOR SYMBOL
3/32" RADIUS CIRCLE
EXHAUST FAN SYMBOL
4-9/32" LONG LINES WITH
A 3/64" SPACE BETWEEN
1/4" SQUARE WITH TWO CIRCLES
1/8" HIGH ATTRIBUTE
1
5/16" DIAMETER CIRCLE
TELEPHONE SYMBOL
JUNCTION BOX LIGHT
1/8" DIAMETER CIRCLE
WINDOW SYMBOL
TRIANGLE INSCRIBED IN A 3/32" RADIUS CIRCLE
J
3/32" HIGH TEXT
3/32" RADIUS CIRCLE
1/8" HIGH ATTRIBUTE
A
CABLE OUTLET SYMBOL
DIAMOND CIRCUMSCRIBED
1/8" HIGH TEXT
SMOKE DETECTOR SYMBOL
1
8
3/32" RADIUS CIRCLE
"
ROOM NAME & NUMBER
SQUARE CIRCUMSCRIBED IN A 3/32" RADIUS CIRCLE
SD
3/32" HIGH TEXT
AROUND A 1/4" DIAMETER CIRCLE
C
1/16"
SWITCH SYMBOL
DOWNLIGHT AT WET LOCATION
1/8" HIGH TEXT
3/32" RADIUS CIRCLE
S
3/32" SQUARE
1/4" LONG LINE
3/8" LONG LINE W/ 1/16 CROSS TAIL
45 DEG ANGLES
1/8" DIAMETER CIRCLE
7/8" DIAMETER CIRCLE
J
MOTION SENSOR
3/32" HIGH TEXT
1/4"
M
1.
CREATE THE ABOVE BLOCKS W/ TEXT (NOT ATTRIBUTES) AND INSERT THEM INTO YOUR DRAWING
1/8" HIGH ATTRIBUTE
NORTH ARROW
JUNCTION BOX SYMBOL
1/16" RADIUS CIRCLE
BEDROOM
107
1/2" X 1/4" RECTANGLE
FLUORESCENT LIGHT STRIP
1/8" DIAMETER CIRCLE W/ 5/64" HIGH TEXT
MASTER
1.
CREATE THE ABOVE BLOCKS W/ TEXT (NOT ATTRIBUTES) AND INSERT THEM INTO YOUR DRAWING
1.
PER THE ATTACHED PLAN
CREATE THE ABOVE BLOCKS AND ATTRIBUTES AND INSERT THEM INTO YOUR DRAWING
PER THE ATTACHED PLAN
PER THE ATTACHED PLAN
2.
USE TEXT STYLE
3.
USE A SPLINE FOR THE DASHDOT2 LINETYPE FOR THE LIGHT SWITCHING
NO. 2 IN YOUR DRAWING FOR ALL TEXT ON THE SYMBOLS
2.
USE TEXT STYLE
3.
USE A SPLINE FOR THE DASHDOT2 LINETYPE FOR THE OUTLET SWITCHING
NO. 2 IN YOUR DRAWING FOR ALL TEXT ON THE SYMBOLS
2.
USE TEXT STYLE
3.
INSERT ALL SYMBOLS YOU CREATED IN THE "A-NOTES" LAYER
NO. 2, WITH THE TEXT HEIGHT SET TO "0" FOR THE ATTRIBUTES