926M, 930M, 938M
Wheel Loaders
926M
930M
938M
Cat® C7.1 ACERT™
Cat C7.1 ACERT
Cat C7.1 ACERT
ISO 14396
114 kW (153 hp)
122 kW (164 hp)
140 kW (188 hp)
ISO 14396 (DIN)
114 kW (155 hp)
122 kW (166 hp)
140 kW (190 hp)
Bucket Capacity
1.9-5.0 m3 (2.5-6.5 yd3)
2.1-5.0 m3 (2.7-6.5 yd3)
2.5-5.0 m3 (3.3-6.5 yd3)
Full Turn Tip Load
7524 kg (16,587 lb)
8469 kg (18,670 lb)
10 028 kg (22,107 lb)
Operating Weight
13 050 kg (28,770 lb)
14 007 kg (30,879 lb)
16 427 kg (36,216 lb)
Engine Model*
Maximum Rated Gross Power:
*Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Making Your Choice Easy
Efficiently Powerful
Experience Hybrid like fuel efficiency with an
intelligent hydrostatic power train and industry
leading fuel savings. For your toughest and most
demanding applications a new Performance Mode
will boost the power and hydraulic speed.
Work Made Easy
Move more with Caterpillar’s patented quick
loading Performance Series buckets and optimized
Z-bar linkage. The parallel lift and high tilt forces
allow you to safely handle loads. Multi-function
work has never been easier with dedicated pumps
and a flow sharing implement valve.
Enjoy All Day Comfort
Have a seat in the M Series Small Wheel Loader
and enjoy, whisper quiet sound levels, all around
visibility and seat mounted joystick controls.
The large spacious cab combined with Caterpillar’s
exclusive hydraulic cylinder damping make this the
most comfortable seat on your job site.
Customize Your Experience
Meet your application requirements and individual
preferences with Caterpillar’s industry first Power
Train Modes. Fine tune machine performance with
adjustments at your fingertips through soft touch
buttons and secondary display.
Configured for Success
A complete range of optional equipment gives
you the versatility to configure an M Series Small
Wheel Loader to be successful in your business.
Contents
Efficiently Powerful.............................................4
Work Made Easy .................................................6
Enjoy All Day Comfort .........................................8
Customize Your Experience .............................10
Configured for Success ...................................11
Service ................................................................12
Customer Support .............................................12
Wheel Loader Specifications .........................13
Bucket Specifications ......................................18
Bucket Selection Tables ............................24, 31
Operating Specifications .................................28
Supplemental Specifications ..........................33
Standard and Optional Equipment .................35
2
Environmental and customer friendly –
up to 95% recyclable content by weight
The Cat 926M, 930M and 938M Small Wheel Loaders set the standard for productivity, fuel efficiency and operator
comfort. The improved optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar
with the parallelism and load handling capability of a tool carrier. A high torque, low speed C7.1 ACERT engine works
in concert with an intelligent hystat power train to deliver fuel efficiency as standard. Meets Tier 4 Final/Stage IV
emission standards with an environmentally friendly, Clean Emission Module designed to manage itself so you can
concentrate on your work. Experience the new industry benchmark.
3
Efficiently Powerful
Experience hybrid-like fuel efficiency
with more power when you need it.
Intelligent Power Management
The Caterpillar exclusive Intelligent Power Management system has been further enhanced to monitor operator input and power
availability to keep the machine working at peak efficiency and provide the operator with greater customization to suit their application.
Power on Demand
A choice of Power Modes allows you to choose between maximum fuel efficiency or boosted power along with hydraulic speed.
Standard Power Mode
• Saves up to 10% fuel compared to K Series Cat loader.
• Delivers equal performance compared to K Series Cat Loader.
• Reduces cab sound levels down to a whisper quiet 64 dB(A) typical.
• Biggest gains seen during load and carry, snow removal and roading applications.
Performance Power Mode
• Enabled at the push of a button (HP+).
• Boosts engine power by up to 10% and engine speed by over 12%.
• Increases hydraulic cycle times and productivity.
4
Six Cylinders of Efficient Power
The Cat C7.1 ACERT engine provides cleaner, quieter operation while delivering superior performance and durability through a high
torque, low speed design. The engine meets Tier 4 Final and Stage IV emission standards with a Clean Emissions Module that is
designed to manage itself so you can concentrate on your work.
• No downtime for regeneration with a passive low
temperature system that keeps you on the job.
• Fit for Life Diesel Particulate Filter (DPF) that is
designed to exceed the engine overhaul life.
• Extended fluid fill intervals with minimal use of Diesel
Exhaust Fluid (DEF) also referred to as Adblue™ with
up to four fuel tank fills per DEF fill.
• Configurable auto idle shut down based on time
and ambient temperature to further reduce fuel burn
and keep operating costs low.
Power to the Ground
Lock up and go with fully locking front differential axles that can be engaged on the
move at full torque with the pull of a trigger on the seat mounted joystick. Maximize your
traction with optional Limited Slip Differential on the rear axle to keep you climbing.
Independent service brakes on front and rear axles provide robust stopping performance
while a push button electronic park brake allows you to safely secure the machine
with ease.
5
Work Made Easy
Getting the job done.
Optimized Z-bar Linkage
The Caterpillar patented optimized Z-bar linkage
combines the digging efficiency of a traditional Z-bar
with integrated tool carrier capabilities for great
performance and versatility.
• Perfect Parallelism functionality available in
Fork Mode gives truly predictable performance
while high tilt forces throughout the working range
help you safely and confidently handle loads with
precise control.
• Visibility to bucket corners and fork tips at ground
level remain excellent while sight lines at maximum
lift are improved with a Generation II lift arm design.
• Lift higher and reach further with optional High Lift
linkage available on all three models.
6
Quick Loading Performance Series Buckets
Performance Series Buckets deliver up to 10% higher fill factors and better material retention for significant productivity and
fuel efficiency improvements. The buckets feature a longer floor to take a bigger bite of the pile, an open throat to heap higher
and curved side bars to help with material retention. This optimized shape is echoed across the General Purpose, Light Material
and High Dump bucket families.
Smooth and Predictable Multi-Function Performance
M Series machines feature an electro-hydraulic control system
that is governed by the Intelligent Power Management system
for peak efficiency. The load-sensing, variable flow system
senses work demand and adjusts flow and pressure to match
the operators request.
• Multi-Function without compromise through dedicated hydraulic
systems featuring one pump for the Intelligent Hydrostatic drive,
a 2nd pump for the implements, and a 3rd pump for the steering
system. Drive, Lift and Steer simultaneously with smooth predictable
control. The M Series simply does what you ask it to.
• Programmable in-cab kick-outs are easy to set on the go for tilt,
lower and lift. This feature is ideal for applications where the work
cycle is repeatable allowing you to quickly return to programmed
set points such as ground and level.
• Fine tune hydro-mechanical performance with fully adjustable
3rd and 4th function flow through the secondary display (when
equipped) for a perfect marriage between machine and work tool.
7
Enjoy All Day Comfort
Best seat on your job site.
Have a Seat and Experience:
• Seat-mounted controls featuring a low effort joystick for lift and tilt functions along with integrated Forward/Neutral/Reverse
switch, differential lock trigger and optional third and fourth auxiliary functions.
• Superior all around visibility with single piece front windshield, new parabolic external mirrors, redesigned Generation II
linkage and clean hydraulic lines routing.
• Automatic climate control with heated rear glass and external mirrors for a quick defrost.
• Fully adjustable controls including steering column, joystick and seat suspension.
• Information at a glance with large primary LCD display and optional secondary display.
• An extra eye on the job site with optional rearview camera and integrated object detection.
• A heated and cooled seat option for added comfort in a wide range of climates.
8
Enjoy coming to work with:
• A spacious, safe, quiet operator environment featuring ergonomic
controls, seat belt notification and optional bluetooth radio with
integrated microphone plus an MP3 port.
• Easy access to vital machine parameters with the optional*
secondary display that works in conjunction with the standard soft
touch panel to allow real time adjustments to machine features
and an integrated help button with over 25 languages.
• Comfortable soft stops at cylinder end stroke conditions and
programmed kick-out points with Caterpillar’s exclusive electro­
hydraulic cylinder snubbing.
• An even smoother ride with optional Ride Control when working
unloaded and loaded with excellent material retention.
• Early starts and late finishes are made easier with optional LED
lighting package that includes engine compartment lighting to
illuminate the way for checking oil, and coolant level along with
re-fueling the machine in dark conditions.
*Standard in Europe
9
Customize Your Experience
Make it yours.
Work as one with your machine by customizing controls.
Flexible Power Train
A smooth, step-less electronically controlled hydrostatic
transmission provides adjustable power to the ground with
excellent groundspeed control and customizable feel.
• Select your Power Train Mode:
– Torque Converter (TC) for smooth rollout.
– Hystat for aggressive engine braking.
– Ice to maximize control on snow and ice.
– Default which blends the best of Hystat and Torque Converter
characteristic.
• Reduce tire wear using Rimpull control which enables you to
match available tractive power to underfoot conditions.
• Fine tune ground speed when using work tools such as brooms,
snow blowers and brush cutters with Creeper Control.
• Set Directional Shift Response, soft and smooth for material
handling applications or sharp for aggressive operation.
Adjustable Electro-Hydraulic Controls
Easily customize hydraulic performance to meet your needs.
• Optimize hydraulic modulation with Fine Mode control when
working with forks, material handling arms, and large tools.
• Quicker hydraulic response for fine grading at speed and
agriculture applications through Lift and Tilt response settings.
• Fully adjustable ride control activation speed along with 3rd
and 4th function auxiliary flows.
Operator Profiles and Coded Start
• The M Series Wheel Loaders will remember you and your
personal settings with unique operator codes to make this
machine truly yours and keep it secure.
10
Configured for Success
Ready to work for you.
The Way You Want It
A complete range of optional equipment and work tools give you the versatility to configure an M Series wheel loader to be successful
in your business. Get with your Cat dealer to configure yours.
Guards:
12
13
14
15
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
1
2
3
Windshield
Tilt cylinder
Lights
Fender deflectors
Drive shaft
Hitch
Steering cylinders
Side power train
Lower power train
Crank case
Rear radiator (930M and 938M only)
Debris Packages:
12)
13)
14)
15)
11
10
9
8
7
6
5
4
16
Reversing fan
Sealed alternator
Turbine precleaner
RESPA precleaner
Work Tools:
16) Full range of attachments
31
29
17
30
Other Options:
17)
18)
19)
20)
21)
22)
23)
24)
25)
26)
27)
28)
29)
30)
31)
18
28
27
26
25
24
23
22
21
20
19
LED auxiliary lights
Secondary display*
Coupler: Fusion and ISO
Auxiliary hydraulics: 3rd and 4th
Autolube
Windshield washing platform
Ride control
Elevated breathers: axles and gear box
Fenders: extended and full coverage
Counterweights: heavy and Log/Agg
Cold start package
Rear object detection
Rearview camera*
Blue Angel certification
Beacon
*Standard equipment in Europe
11
Service
Schedule your downtime to maximize your up time.
Get up and running quickly with ground level, daily service access and optional engine compartment lighting. Three large service doors
can be opened and closed in any order to give full access to filters and service points. Extended service intervals on hydraulic and
power train filters reduce service time and maximize uptime. Additional service features include:
• Product Link™ PRO standard with three year subscription
to VisionLink®.
• Maintenance reminders through secondary display at
scheduled intervals.
• Fit for Life Diesel Particulate Filter that is designed to exceed
the engine overhaul life.
• Quick fuel filter service with Caterpillar’s exclusive electric
fuel priming pump.
• Jump start studs as standard equipment.
• Extended cleanouts with single plane cooling system and wide
spaced 6 fins per inch coolers as standard.
• Integrated Autolube (optional) with adjustable greasing
frequency.
Customer Support
Unmatched service makes the difference.
Renowned Cat Dealer Support
Rely on your Cat dealer to help you every step of the
way with new or used machine sales, rental or rebuild
options to meet your business needs.
Maximize your machine uptime with unsurpassed
worldwide parts availability, trained technicians and
customer support agreements.
Let us earn your business. Experience an M Series
Small Wheel Loader and join the Caterpillar family.
12
926M, 930M, 938M Wheel Loader Specifications
Engine
Cat C7.1 ACERT
926M
Power Mode
930M
938M
Performance Standard Performance Standard Performance Standard
(HP+)
(HP+)
(HP+)
Range 1-4
Range 1-3*
Range 1-4
Range 1-3*
Range 1-4
Range 1-3*
Maximum Rated Gross Power
Maximum Engine Speed
ISO 14396
ISO 14396 (DIN)
Rated Net Power
SAE J1349 at Minimum Fan Speed
ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed
ISO 9249 (DIN) at Minimum Fan Speed
Maximum Gross Torque
ISO 14396
Maximum Net Torque
SAE J1349
ISO 9249 (1977)/EEC 80/1269
Displacement
Bore
Stroke
kW
hp
1,800 rpm
114 153
114 155
1,800 rpm
110 148
111 149
111 151
kW
hp
1,600 rpm
109 146
109 148
1,600 rpm
105 141
106 142
106 144
kW
hp
1,800 rpm
122 164
122 166
1,800 rpm
117 157
119 160
119 162
kW
hp
1,600 rpm
119 160
119 162
1,600 rpm
115 154
116 156
116 158
kW
hp
1,800 rpm
140 188
140 190
1,800 rpm
136 182
137 184
137 186
kW
hp
1,600 rpm
129 173
129 175
1,600 rpm
125 168
126 169
126 171
N·m
721
N·m
721
N·m
804
N·m
804
N·m
879
N·m
879
lbf-ft
531
694 511
702 517
427 in3
4 in
5 in
lbf-ft
531
694 511
702 517
7.01 L
105 mm
135 mm
lbf-ft
592
768 566
776 572
427 in3
4 in
5 in
lbf-ft
592
768 566
776 572
7.01 L
105 mm
135 mm
lbf-ft
648
843 621
852 628
427 in3
4 in
5 in
lbf-ft
648
843 621
852 628
7.01 L
105 mm
135 mm
* Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
• Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine
is equipped with alternator, air cleaner, emission components and fan at specified speed.
• No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
• The Cat C7.1 ACERT engine meets Tier 4 Final/Stage IV off-highway emission standards.
Engine Torque
926M
930M
hp kW
N∙m lbf-ft
938M
hp kW
N∙m lbf-ft
900
160
800
120
700
120
80
600
160
500
800
120
700
120
80
600
400
80
600
800
1000
1200
1400
1600
1800
160
500
800
120
700
120
80
300
Power
Torque
600
800
1000
1200
1400
1600
1800
500
400
80
500
Power
Torque
40
400
40
600
600
500
40
400
N∙m lbf-ft
600
400
80
Power
Torque
40
kW
900
600
500
40
hp
900
300
400
40
600
800
1000
1200
1400
1600
300
1800
Cab
• ROPS: SAE J1040 MAY94, ISO 3471-1994.
• FOPS: SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II.
• The declared dynamic operator around pressures levels per ISO 6396:2008*
while running in Performance Power Mode:
– Standard cab: 68 ±3 dB(A) and Deluxe cab: 66 ±2 dB(A)
* The measurements were conducted with the cab doors and windows closed and at
70% of maximum engine cooling fan speed. The sound level may vary at different
engine cooling fan speeds.
13
926M, 930M, 938M Wheel Loader Specifications
Loader Hydraulic System
• Implement system uses a dedicated load sensing variable displacement pump
with dual double acting lift cylinders and a single double acting tilt cylinder.
• Flow values listed are for a machine running in Performance Power Mode
(1,800 rpm).
* 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow
through the secondary display when equipped.
Maximum Flow – Implement Pump
3rd Function Maximum Flow*
4th Function Maximum Flow*
Maximum Working Pressure – Implement Pump
Relief Pressure – Tilt Cylinder
3rd and 4th Function Maximum Working Pressure
3rd and 4th Function Relief Pressure
Lift Cylinder: Double Acting
Bore Diameter
Rod Diameter
Stroke
Tilt Cylinder: Double Acting
Bore Diameter
Rod Diameter
Stroke
Cycle Times: Performance (HP+) at 1,800 rpm/
Standard Power Mode at 1,600 rpm
Raise (Ground Level to Maximum Lift)
Dump (at Maximum Lift Height)
Float Down (Maximum Lift to Ground Level)
Total Cycle Time
926M
150 L/min
150 L/min
150 L/min
26 000 kPa
28 000 kPa
26 000 kPa
28 000 kPa
40 gal/min
40 gal/min
40 gal/min
3,771 psi
4,061 psi
3,771 psi
4,061 psi
930M
190 L/min
190 L/min
160 L/min
25 000 kPa
28 000 kPa
25 000 kPa
28 000 kPa
50 gal/min
50 gal/min
42 gal/min
3,626 psi
4,061 psi
3,626 psi
4,061 psi
938M
190 L/min
190 L/min
160 L/min
28 000 kPa
30 000 kPa
28 000 kPa
30 000 kPa
50 gal/min
50 gal/min
42 gal/min
4,061 psi
4,351 psi
4,061 psi
4,351 psi
110 mm
60 mm
728 mm
4.3 in
2.4 in
28.7 in
120 mm
65 mm
728 mm
4.7 in
2.6 in
28.7 in
120 mm
65 mm
789 mm
4.7 in
2.6 in
31.1 in
130 mm
70 mm
555 mm
5.1 in
2.8 in
21.9 in
150 mm
90 mm
555 mm
5.9 in
3.5 in
21.9 in
150 mm
90 mm
555 mm
5.9 in
3.5 in
21.9 in
5.5/6.2 seconds
1.5/1.7 seconds
2.6/2.6 seconds
9.6/10.5 seconds
5.1/5.7 seconds
1.5/1.7 seconds
2.7/2.7 seconds
9.3/10.1 seconds
5.5/6.2 seconds
1.5/1.7 seconds
2.7/2.7 seconds
9.7/10.6 seconds
Steering
• Steering system uses a dedicated load sensing variable displacement pump with dual
double acting cylinders.
• Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
926M
Steering Cylinder: Double Acting
Bore Diameter
Rod Diameter
Stroke
Maximum Flow – Steering Pump
Maximum Working Pressure – Steering Pump
Maximum Steering Torque
0° (Straight Machine)
40° (Full Turn)
Steering Cycle Times (Full Left to Full Right)
Minimum RPM: Pump Flow Limited
Maximum RPM: 90 rpm Steering Wheel Speed
14
70 mm
40 mm
438 mm
130 L/min
24 130 kPa
930M
2.8 in
1.6 in
17.2 in
34 gal/min
3,500 psi
70 mm
40 mm
438 mm
130 L/min
24 130 kPa
938M
2.8 in
1.6 in
17.2 in
34 gal/min
3,500 psi
80 mm
50 mm
399 mm
130 L/min
24 130 kPa
3.1 in
2 in
15.7 in
34 gal/min
3,500 psi
50 375 N·m 37,155 lbf-ft
37 620 N·m 27,747 lbf-ft
50 375 N·m 37,155 lbf-ft
37 620 N·m 27,747 lbf-ft
57 630 N·m 42,506 lbf-ft
42 570 N·m 31,398 lbf-ft
2.8 seconds
2.4 seconds
2.8 seconds
2.4 seconds
3.1 seconds
2.3 seconds
926M, 930M, 938M Wheel Loader Specifications
Transmission
* Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph)
to 13 km/h (8 mph) in Range 1 through the secondary display when equipped.
Factory default is 7 km/h (4.4 mph).
926M
Forward and Reverse
Range 1*
Range 2
Range 3
Range 4
930M
938M
1-13 km/h
13 km/h
27 km/h
40 km/h
0.6-8 mph
8 mph
17 mph
25 mph
1-13 km/h
13 km/h
27 km/h
40 km/h
0.6-8 mph
8 mph
17 mph
25 mph
1-13 km/h
13 km/h
27 km/h
40 km/h
0.6-8 mph
8 mph
17 mph
25 mph
926M
195 L
19 L
30 L
20 L
8.5 L
21 L
21 L
160 L
90 L
51.5 gal
5.0 gal
7.9 gal
5.3 gal
2.2 gal
5.5 gal
5.5 gal
42.3 gal
23.8 gal
930M
195 L
19 L
30 L
20 L
8.5 L
26 L
25 L
165 L
90 L
51.5 gal
5.0 gal
7.9 gal
5.3 gal
2.2 gal
6.9 gal
6.6 gal
43.6 gal
23.8 gal
938M
195 L
19 L
32 L
20 L
11 L
35 L
35 L
170 L
90 L
51.5 gal
5.0 gal
8.5 gal
5.3 gal
2.9 gal
9.2 gal
9.2 gal
44.9 gal
23.8 gal
Service Refill Capacities
Fuel Tank
Diesel Exhaust Fluid (DEF) Tank
Cooling System
Engine Crankcase
Transmission (Gear Box)
Front Axles
Rear Axles
Hydraulic System (Including Tank)
Hydraulic Tank
Power Train
• Power train is governed by the Caterpillar exclusive Intelligent Power Management
system to deliver peak performance and efficiency.
* Differential front locking axle can be engaged on the go at full torque to 10 km/h
(6.2 mph) on the 926M/930M and up to 20 km/h (12.4 mph) on the 938M.
Front Axle
Traction Aid (standard)
Rear Axle
Oscillation Angle by Tire Size
17.5 R25
20.5 R25, 550/65, 600/65, 650/65
23.5 R25
Flexports, 750/65, 620/65, Skidder
Traction Aid (optional)
Brakes
Service
Park
926M
Fixed
Locking differential
Oscillating
930M
Fixed
Locking differential
Oscillating
938M
Fixed
Locking differential
Oscillating
± 13.5 degrees
± 10.5 degrees
—
± 7 degrees
Limited slip differential
—
± 10.5 degrees
—
± 7 degrees
Limited slip differential
—
± 10.5 degrees
± 7 degrees
± 7 degrees
Limited slip differential
Inboard wet disc
Spring applied
hydraulically released
Inboard wet disc
Spring applied
hydraulically released
Outboard wet disc
Spring applied
hydraulically released
15
926M, 930M, 938M Wheel Loader Specifications
Dimensions with Bucket
23
17
19
13
24
12
11
10
21
2
14
22
1
9
25
16
27
26
4
15
3
6
7
18
20
8
5
Standard Lift
*Vary with bucket.
**Vary with tire.
926M
930M
938M
** 1 Height: Ground to Cab
** 2 Height: Ground to Beacon
3340 mm
10'11"
3340 mm
10'11"
3340 mm
10'11"
3707 mm
12'1"
3707 mm
12'1"
3707 mm
12'1"
** 3 Height: Ground Axle Center
** 4 Height: Ground Clearance
685 mm
2'2"
685 mm
2'2"
685 mm
2'2"
397 mm
1'3"
397 mm
1'3"
386 mm
1'3"
* 5 Length: Overall
6 Length: Rear Axle to Bumper
7451 mm
24'5"
7530 mm
24'8"
7656 mm
25'1"
1986 mm
6'6"
1993 mm
6'6"
1968 mm
6'5"
7 Length: Hitch to Front Axle
8 Length: Wheel Base
1500 mm
4'11"
1500 mm
4'11"
1525 mm
5'0"
3000 mm
9'10"
3000 mm
9'10"
3050 mm
10'0"
* 9 Clearance: Bucket at 45°
** 10 Clearance: Load over Height
2885 mm
9'5"
2828 mm
9'3"
2834 mm
9'3"
3330 mm
10'11"
3331 mm
10'11"
3354 mm
11'0"
** 11 Clearance: Level Bucket
** 12 Height: Bucket Pin
3580 mm
11'8"
3580 mm
11'8"
3641 mm
11'11"
3907 mm
12'9"
3907 mm
12'9"
3969 mm
13'0"
** 13 Height: Overall
* 14 Reach: Bucket at 45°
5076 mm
16'7"
5147 mm
16'10"
5273 mm
17'3"
1024 mm
3'4"
1064 mm
3'5"
1146 mm
3'9"
15 Carry Height: Bucket Pin
** 16 Dig Depth
17 Width: Bucket
460 mm
1'6"
460 mm
1'6"
473 mm
1'6"
100 mm
3.9"
100 mm
3.9"
101 mm
3.9"
2550 mm
8'4"
2550 mm
8'4"
2750 mm
9'0"
18 Width: Tread Center
19 Turning Radius: Over Bucket
20 Width: Over Tires
21 Turning Radius: Outside of Tires
22 Turning Radius: Inside of Tires
1930 mm
6'3"
1930 mm
6'3"
2083 mm
6'10"
5924 mm
19'5"
5946 mm
19'6"
6134 mm
20'1"
2540 mm
8'4"
2540 mm
8'4"
2693 mm
8'10"
5402 mm
17'8"
5402 mm
17'8"
5546 mm
18'2"
2851 mm
9'4"
2851 mm
9'4"
2843 mm
9'3"
23 Rack Angle at Full Lift
24 Dump Angle at Full Lift
54°
54°
54°
50°
49°
49°
25 Rack Angle at Carry
26 Departure Angle
45°
45°
46°
33°
33°
33°
40°
40°
40°
27 Articulation Angle
Unless otherwise noted, all Standard Lift dimensions and specifications listed are for a machine configured with the following:
Optional Equipment
Full Fluids, 80 kg (176 lb) Operator, Secondary Steering, Ride Control, Crankcase,
Power Train and Driveshaft Guards, Bucket with Bolt-on Cutting Edge
Tires – Michelin
20.5R25 (L-3) XHA2
20.5R25 (L-3) XHA2
20.5R25 (L-3) XHA2
Pressure in Front Tires
4.14 bar
Pressure in Rear Tires
2.76 bar
Counterweight Group
16
Heavy
60 psi
4.14 bar
40 psi
2.76 bar
Heavy
60 psi
4.48 bar
40 psi
2.76 bar
65 psi
40 psi
Heavy
926M, 930M, 938M Wheel Loader Specifications
Dimensions with Bucket
23
17
19
13
24
12
11
10
21
2
14
22
1
9
25
16
27
26
4
15
3
6
7
18
20
8
5
High Lift
*Vary with bucket.
**Vary with tire.
926M
930M
938M
** 1 Height: Ground to Cab
** 2 Height: Ground to Beacon
3340 mm
10'11"
3340 mm
10'11"
3340 mm
10'11"
3707 mm
12'1"
3707 mm
12'1"
3707 mm
12'1"
** 3 Height: Ground Axle Center
** 4 Height: Ground Clearance
685 mm
2'2"
685 mm
2'2"
685 mm
2'2"
397 mm
1'3"
397 mm
1'3"
386 mm
1'3"
* 5 Length: Overall
6 Length: Rear Axle to Bumper
8093 mm
26'6"
8324 mm
27'3"
8397 mm
27'6"
1986 mm
6'6"
1993 mm
6'6"
1968 mm
6'5"
7 Length: Hitch to Front Axle
8 Length: Wheel Base
1500 mm
4'11"
1500 mm
4'11"
1525 mm
5'0"
3000 mm
9'10"
3000 mm
9'10"
3050 mm
10'0"
* 9 Clearance: Bucket at 45°
** 10 Clearance: Load over Height
3378 mm
11'0"
3421 mm
11'2"
3415 mm
11'2"
3550 mm
11'7"
3540 mm
11'7"
3561 mm
11'8"
** 11 Clearance: Level Bucket
** 12 Height: Bucket Pin
4073 mm
13'4"
4173 mm
13'8"
4222 mm
13'10"
4400 mm
14'5"
4500 mm
14'9"
4550 mm
14'11"
** 13 Height: Overall
* 14 Reach: Bucket at 45°
5569 mm
18'3"
5740 mm
18'9"
5853 mm
19'2"
1261 mm
4'1"
1385 mm
4'6"
1413 mm
4'7"
15 Carry Height: Bucket Pin
** 16 Dig Depth
17 Width: Bucket
644 mm
2'1"
684 mm
2'2"
682 mm
2'2"
135 mm
5.3"
135 mm
5.3"
135 mm
5.3"
2550 mm
8'4"
2550 mm
8'4"
2750 mm
9'0"
18 Width: Tread Center
19 Turning Radius: Over Bucket
20 Width: Over Tires
21 Turning Radius: Outside of Tires
22 Turning Radius: Inside of Tires
1930 mm
6'3"
1930 mm
6'3"
2083 mm
6'10"
6234 mm
20'5"
6328 mm
20'9"
6490 mm
21'3"
2540 mm
8'4"
2540 mm
8'4"
2693 mm
8'10"
5402 mm
17'8"
5402 mm
17'8"
5546 mm
18'2"
2851 mm
9'4"
2851 mm
9'4"
2843 mm
9'3"
23 Rack Angle at Full Lift
24 Dump Angle at Full Lift
51°
53°
53°
49°
48°
47°
25 Rack Angle at Carry
26 Departure Angle
49°
50°
50°
33°
33°
33°
40°
40°
40°
27 Articulation Angle
Unless otherwise noted, all High Lift dimensions and specifications listed are for a machine configured with the following:
Optional Equipment
Full Fluids, 80 kg (176 lb) Operator, Secondary Steering, Ride Control, Crankcase,
Power Train and Driveshaft Guards, Bucket with Bolt-on Cutting Edge
Tires – Michelin
20.5R25 (L-3) XHA2
20.5R25 (L-3) XHA2
20.5R25 (L-3) XHA2
Pressure in Front Tires
4.14 bar
Pressure in Rear Tires
2.76 bar
Counterweight Group
Heavy
60 psi
4.14 bar
40 psi
2.76 bar
Heavy
60 psi
4.48 bar
65 psi
40 psi
2.76 bar
40 psi
Standard
17
Bucket Specifications
926M Operating Specifications with Buckets
General Purpose
Pin On
Capacity – rated
Capacity – rated at 110% fill factor
17 Width: bucket
Nominal material density,
110% fill factor
9 Clearance: full lift, 45° dump
14 Reach: full lift, 45° dump
Reach: 2130 mm (7'0") clearance,
45° dump
Reach: level arm, level bucket
16 Dig depth
5 Length: overall
13 Height: overall
19 Turning radius: over bucket
Tipping load – straight, ISO 14397-1*
Tipping load – straight, rigid tire**
Tipping load – full turn, ISO 14397-1*
Tipping load – full turn, rigid tire**
Breakout force
Operating weight
m3
yd3
m3
yd3
mm
ft/in
kg/m3
lb/yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
1.9
2.5
2.1
2.7
2550
8'4"
1889
3,223
2912
9'6"
992
3'3"
1547
5'0"
2278
7'5"
100
3.9"
7409
24'3"
5052
16'6"
5912
19'4"
9179
20,235
9561
21,078
7894
17,403
8398
18,514
10 685
23,557
12 696
27,989
2.1
2.7
2.3
3.0
2550
8'4"
1696
2,879
2855
9'4"
1033
3'4"
1560
5'1"
2350
7'8"
100
3.9"
7481
24'6"
5122
16'9"
5933
19'5"
9115
20,094
9494
20,931
7836
17,276
8336
18,378
9966
21,972
12 715
28,031
Fusion
2.3
3.0
2.5
3.3
2550
8'4"
1529
2,584
2807
9'2"
1070
3'6"
1573
5'1"
2413
7'11"
100
3.9"
7544
24'9"
5180
16'11"
5951
19'6"
9008
19,859
9384
20,687
7737
17,057
8231
18,145
9388
20,697
12 778
28,171
1.9
2.5
2.1
2.7
2550
8'4"
1800
3,072
2885
9'5"
1024
3'4"
1566
5'1"
2320
7'7"
100
3.9"
7451
24'5"
5076
16'7"
5924
19'5"
8786
19,370
9152
20,177
7524
16,587
8004
17,646
10 229
22,550
13 050
28,770
2.1
2.7
2.3
3.0
2550
8'4"
1612
2,736
2828
9'3"
1064
3'5"
1578
5'2"
2392
7'10"
100
3.9"
7523
24'8"
5147
16'10"
5946
19'6"
8701
19,182
9064
19,982
7445
16,414
7921
17,461
9552
21,059
13 094
28,867
ISO 23727
2.3
3.0
2.5
3.3
2550
8'4"
1457
2,462
2779
9'1"
1102
3'7"
1590
5'2"
2455
8'0"
100
3.9"
7586
24'10"
5205
17'0"
5964
19'6"
8621
19,005
8980
19,797
7371
16,251
7842
17,288
9023
19,893
13 132
28,950
2.1
2.7
2.3
3.0
2550
8'4"
1530
2,598
2727
8'11"
1190
3'10"
1649
5'4"
2553
8'4"
94
3.7"
7679
25'2"
5255
17'2"
5975
19'7"
8268
18,227
8612
18,987
7070
15,587
7522
16,582
8235
18,154
13 060
28,792
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
18
2.3
3.0
2.5
3.3
2550
8'4"
1383
2,338
2677
8'9"
1227
4'0"
1657
5'5"
2616
8'6"
94
3.7"
7742
25'4"
5313
17'5"
5995
19'8"
8190
18,056
8531
18,808
6999
15,429
7445
16,414
7822
17,245
13 098
28,876
High Lift
–
–
–
–
–
–
–
–
+493
+1'7"
+237
+9"
+572
+1'10"
+523
+1'8"
+35
+1.4"
+642
+2'1"
+493
+1'7"
+311
+1'0"
–2171
–4,786
–2262
–4,985
–1911
–4,213
–2033
–4,482
–494
–1,089
+278
+613
Bucket Specifications
926M Operating Specifications with Buckets
Light Material
Pin On
Capacity – rated
Capacity – rated at 110% fill factor
17 Width: bucket
Nominal material density,
110% fill factor
9 Clearance: full lift, 45° dump
14 Reach: full lift, 45° dump
Reach: 2130 mm (7'0") clearance,
45° dump
Reach: level arm, level bucket
16 Dig depth
5 Length: overall
13 Height: overall
19 Turning radius: over bucket
Tipping load – straight, ISO 14397-1*
Tipping load – straight, rigid tire**
Tipping load – full turn, ISO 14397-1*
Tipping load – full turn, rigid tire**
Breakout force
Operating weight
m3
yd3
m3
yd3
mm
ft/in
kg/m3
lb/yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
3.1
4.1
3.4
4.5
2750
9'0"
1094
1,828
2703
8'10"
1066
3'5"
1509
4'11"
2500
8'2"
100
3.9"
7632
25'0"
5179
16'11"
6068
19'10"
8719
19,221
9082
20,022
7463
16,452
7939
17,503
8616
18,995
13 006
28,674
3.5
4.6
3.9
5.0
2750
9'0"
951
1,614
2631
8'7"
1138
3'8"
1538
5'0"
2603
8'6"
100
3.9"
7734
25'4"
5284
17'4"
6099
20'0"
8566
18,884
8923
19,671
7321
16,139
7788
17,169
7890
17,393
13 092
28,862
Fusion
3.8
5.0
4.2
5.5
2750
9'0"
860
1,441
2573
8'5"
1196
3'11"
1559
5'1"
2685
8'9"
100
3.9"
7816
25'7"
5356
17'6"
6124
20'1"
8424
18,570
8775
19,344
7190
15,852
7649
16,863
7768
17,124
13 158
29,008
3.1
4.0
3.4
4.4
2750
9'0"
1058
1,785
2672
8'9"
1094
3'7"
1521
4'11"
2543
8'4"
100
3.9"
7674
25'2"
5204
17'0"
6082
19'11"
8359
18,428
8707
19,196
7124
15,706
7579
16,708
8301
18,301
13 337
29,403
3.5
4.6
3.9
5.0
2750
9'0"
904
1,534
2600
8'6"
1167
3'9"
1549
5'0"
2645
8'8"
100
3.9"
7776
25'6"
5309
17'5"
6112
20'0"
8181
18,035
8522
18,786
6957
15,337
7401
16,316
7609
16,774
13 455
29,663
ISO 23727
3.8
5.0
4.2
5.5
2750
9'0"
817
1,369
2543
8'4"
1225
4'0"
1569
5'1"
2726
8'11"
100
3.9"
7858
25'9"
5383
17'7"
6138
20'1"
8042
17,730
8378
18,469
6830
15,058
7266
16,019
7490
16,513
13 521
29,808
3.5
4.6
3.9
5.0
2750
9'0"
864
1,466
2527
8'3"
1206
3'11"
1538
5'0"
2724
8'11"
125
4.9"
7875
25'10"
5385
17'8"
6126
20'1"
7824
17,248
8150
17,967
6652
14,664
7076
15,600
7094
15,638
13 375
29,487
4.1
5.4
4.5
5.9
2750
9'0"
709
1,194
2407
7'10"
1326
4'4"
1571
5'1"
2894
9'5"
125
4.9"
8045
26'4"
5552
18'2"
6183
20'3"
7543
16,628
7857
17,321
6390
14,088
6798
14,987
5961
13,141
13 538
29,847
High Lift
–
–
–
–
–
–
–
–
+505
+1'7"
+256
+10"
+592
+1'11"
+523
+1'8"
+35
+1.4"
+642
+2'1"
+493
+1'7"
+313
+1'0"
–2100
–4,630
–2188
–4,823
–1851
–4,080
–1969
–4,341
–423
–932
+278
+613
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
19
Bucket Specifications
930M Operating Specifications with Buckets
General Purpose
Pin On
Capacity – rated
Capacity – rated at 110% fill factor
17 Width: bucket
Nominal material density,
110% fill factor
9 Clearance: full lift, 45° dump
14 Reach: full lift, 45° dump
Reach: 2130 mm (7'0") clearance,
45° dump
Reach: level arm, level bucket
16 Dig depth
5 Length: overall
13 Height: overall
19 Turning radius: over bucket
Tipping load – straight, ISO 14397-1*
Tipping load – straight, rigid tire**
Tipping load – full turn, ISO 14397-1*
Tipping load – full turn, rigid tire**
Breakout force
Operating weight
m3
yd3
m3
yd3
mm
ft/in
kg/m3
lb/yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
2.1
2.7
2.3
3.0
2550
8'4"
1921
3,260
2855
9'4"
1033
3'4"
1560
5'1"
2350
7'8"
100
3.9"
7488
24'6"
5122
16'9"
5933
19'5"
10 370
22,862
10 802
23,814
8873
19,561
9439
20,810
12 891
28,419
13 627
30,042
2.3
3.0
2.5
3.3
2550
8'4"
1733
2,929
2807
9'2"
1070
3'6"
1573
5'1"
2413
7'11"
100
3.9"
7551
24'9"
5180
16'11"
5951
19'6"
10 258
22,615
10 685
23,557
8769
19,332
9329
20,566
12 158
26,803
13 691
30,182
Fusion
2.5
3.3
2.8
3.6
2550
8'4"
1571
2,645
2761
9'0"
1109
3'7"
1587
5'2"
2475
8'1"
100
3.9"
7613
24'11"
5239
17'2"
5970
19'7"
10 119
22,309
10 541
23,239
8639
19,045
9190
20,260
11 488
25,326
13 789
30,400
2.1
2.7
2.3
3.0
2550
8'4"
1833
3,112
2828
9'3"
1064
3'5"
1578
5'2"
2392
7'10"
100
3.9"
7530
24'8"
5147
16'10"
5946
19'6"
9941
21,915
10 355
22,828
8469
18,670
9009
19,862
12 371
27,274
14 007
30,879
2.3
3.0
2.5
3.3
2550
8'4"
1658
2,803
2779
9'1"
1102
3'7"
1590
5'2"
2455
8'0"
100
3.9"
7593
24'10"
5205
17'0"
5964
19'6"
9855
21,726
10 265
22,631
8390
18,497
8926
19,678
11 698
25,790
14 044
30,962
ISO 23727
2.5
3.3
2.8
3.6
2550
8'4"
1505
2,535
2733
8'11"
1140
3'8"
1603
5'3"
2517
8'3"
100
3.9"
7655
25'1"
5264
17'3"
5983
19'7"
9734
21,460
10 140
22,354
8278
18,249
8806
19,414
11 080
24,427
14 127
31,144
2.1
2.7
2.3
3.0
2550
8'4"
1742
2,957
2727
8'11"
1190
3'10"
1649
5'4"
2553
8'4"
94
3.7"
7686
25'2"
5255
17'2"
5975
19'7"
9450
20,834
9844
21,702
8047
17,740
8560
18,872
10 707
23,604
13 973
30,804
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
20
2.3
3.0
2.5
3.3
2550
8'4"
1575
2,662
2677
8'9"
1227
4'0"
1657
5'5"
2616
8'6"
94
3.7"
7749
25'5"
5313
17'5"
5995
19'8"
9367
20,651
9758
21,511
7971
17,572
8480
18,694
10 182
22,448
14 011
30,888
High Lift
–
–
–
–
–
–
–
–
+593
+1'11"
+320
+13"
+717
+2'4"
+653
+2'1"
+35
+1.4"
+794
+2'7"
+593
+1'11"
+384
+1'3"
–2823
–6,222
–2940
–6,482
–2471
–5,448
–2629
–5,795
–299
–658
+232
+511
Bucket Specifications
930M Operating Specifications with Buckets
Light Material
Pin On
Capacity – rated
Capacity – rated at 110% fill factor
17 Width: bucket
Nominal material density,
110% fill factor
9 Clearance: full lift, 45° dump
14 Reach: full lift, 45° dump
Reach: 2130 mm (7'0") clearance,
45° dump
Reach: level arm, level bucket
16 Dig depth
5 Length: overall
13 Height: overall
19 Turning radius: over bucket
Tipping load – straight, ISO 14397-1*
Tipping load – straight, rigid tire**
Tipping load – full turn, ISO 14397-1*
Tipping load – full turn, rigid tire**
Breakout force
Operating weight
m3
yd3
m3
yd3
mm
ft/in
kg/m3
lb/yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
3.5
4.6
3.9
5.0
2750
9'0"
1083
1,838
2631
8'7"
1138
3'8"
1538
5'0"
2603
8'6"
100
3.9"
7741
25'4"
5284
17'4"
6099
20'0"
9796
21,596
10 204
22,496
8337
18,378
8869
19,552
10 278
22,658
14 004
30,874
3.8
5.0
4.2
5.5
2750
9'0"
981
1,643
2573
8'5"
1196
3'11"
1559
5'1"
2685
8'9"
100
3.9"
7823
25'7"
5356
17'6"
6124
20'1"
9643
21,260
10 045
22,145
8198
18,072
8721
19,226
10 140
22,354
14 070
31,019
Fusion
4.2
5.5
4.6
6.0
2750
9'0"
874
1,484
2510
8'2"
1259
4'1"
1579
5'2"
2773
9'1"
100
3.9"
7911
25'11"
5445
17'10"
6152
20'2"
9512
20,969
9908
21,843
8077
17,805
8592
18,942
9024
19,895
14 134
31,160
3.5
4.6
3.9
5.0
2750
9'0"
1034
1,755
2600
8'6"
1167
3'9"
1549
5'0"
2645
8'8"
100
3.9"
7783
25'6"
5309
17'5"
6112
20'0"
9395
20,713
9787
21,576
7960
17,549
8468
18,669
9926
21,883
14 367
31,674
3.8
5.0
4.2
5.5
2750
9'0"
936
1,568
2543
8'4"
1225
4'0"
1569
5'1"
2726
8'11"
100
3.9"
7865
25'9"
5383
17'7"
6138
20'1"
9247
20,386
9632
21,235
7825
17,251
8325
18,352
9792
21,588
14 433
31,819
ISO 23727
4.2
5.5
4.6
6.0
2750
9'0"
834
1,416
2480
8'1"
1287
4'2"
1588
5'2"
2815
9'2"
100
3.9"
7953
26'1"
5471
17'11"
6166
20'2"
9118
20,102
9498
20,940
7707
16,990
8199
18,075
8740
19,267
14 497
31,960
3.5
4.6
3.9
5.0
2750
9'0"
989
1,678
2527
8'3"
1206
3'11"
1538
5'0"
2724
8'11"
125
4.9"
7882
25'10"
5385
17'8"
6126
20'1"
8988
19,814
9362
20,639
7613
16,783
8099
17,854
9293
20,488
14 288
31,498
5.0
6.5
5.5
7.2
2750
9'0"
665
1,120
2357
7'8"
1377
4'6"
1581
5'2"
2966
9'8"
125
4.9"
8124
26'7"
5840
19'1"
6208
20'4"
8667
19,107
9028
19,904
7313
16,121
7780
17,150
7810
17,218
14 510
31,990
High Lift
–
–
–
–
–
–
–
–
+607
+1'11"
+342
+13"
+746
+2'5"
+653
+2'1"
+35
+1.4"
+794
+2'7"
+593
+1'11"
+386
+1'3"
–2712
–5,978
–2825
–6,227
–2377
–5,241
–2529
–5,575
–250
–551
+232
+511
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
21
Bucket Specifications
938M Operating Specifications with Buckets
General Purpose
Pin On
Capacity – rated
Capacity – rated at 110% fill factor
17 Width: bucket
Nominal material density,
110% fill factor
9 Clearance: full lift, 45° dump
14 Reach: full lift, 45° dump
Reach: 2130 mm (7'0") clearance,
45° dump
Reach: level arm, level bucket
16 Dig depth
5 Length: overall
13 Height: overall
19 Turning radius: over bucket
Tipping load – straight, ISO 14397-1*
Tipping load – straight, rigid tire**
Tipping load – full turn, ISO 14397-1*
Tipping load – full turn, rigid tire**
Breakout force
Operating weight
m3
yd3
m3
yd3
mm
ft/in
kg/m3
lb/yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
2.5
3.3
2.8
3.6
2750
9'0"
1912
3,220
2869
9'4"
1108
3'7"
1637
5'4"
2452
8'0"
100
3.9"
7604
24'11"
5242
17'2"
6117
20'0"
12 344
27,214
12 859
28,348
10 517
23,186
11 189
24,666
13 813
30,451
16 001
35,276
2.7
3.5
3.0
3.9
2750
9'0"
1755
2,947
2822
9'3"
1146
3'9"
1652
5'5"
2514
8'2"
100
3.9"
7666
25'1"
5301
17'4"
6136
20'1"
12 245
26,995
12 755
28,120
10 426
22,986
11 092
24,453
13 082
28,841
16 046
35,374
ISO 23727
Fusion
2.9
3.8
3.2
4.2
2750
9'0"
1622
2,716
2786
9'1"
1178
3'10"
1664
5'5"
2563
8'4"
100
3.9"
7715
25'3"
5348
17'6"
6150
20'2"
12 161
26,810
12 668
27,928
10 350
22,817
11 011
24,274
12 552
27,673
16 082
35,455
2.5
3.3
2.8
3.6
2750
9'0"
1823
3,070
2834
9'3"
1146
3'9"
1658
5'5"
2504
8'2"
101
4"
7656
25'1"
5273
17'3"
6134
20'1"
11 820
26,057
12 312
27,143
10 028
22,107
10 668
23,518
13 170
29,035
16 427
36,216
2.7
3.5
3.0
3.9
2750
9'0"
1673
2,809
2787
9'1"
1185
3'10"
1672
5'5"
2566
8'5"
101
4"
7718
25'3"
5332
17'5"
6152
20'2"
11 721
25,840
12 210
26,917
9938
21,909
10 572
23,307
12 498
27,553
16 472
36,313
2.9
3.8
3.2
4.2
2750
9'0"
1546
2,589
2751
9'0"
1216
3'11"
1684
5'6"
2615
8'6"
101
4"
7767
25'5"
5379
17'7"
6167
20'2"
11 641
25,663
12 126
26,732
9864
21,747
10 494
23,135
12 009
26,474
16 508
36,393
2.5
3.3
2.8
3.6
2750
9'0"
1751
2,949
2739
8'11"
1264
4'1"
1725
5'7"
2655
8'8"
94
3.7"
7802
25'7"
5375
17'7"
6160
20'2"
11 349
25,019
11 822
26,062
9632
21,234
10 246
22,589
11 583
25,537
16 316
35,970
2.7
3.5
3.0
3.9
2750
9'0"
1605
2,695
2691
8'9"
1302
4'3"
1736
5'8"
2717
8'10"
94
3.7"
7864
25'9"
5434
17'9"
6180
20'3"
11 245
24,791
11 714
25,824
9536
21,024
10 145
22,366
11 039
24,336
16 367
36,083
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
***938M High Lift is configured with standard counterweight.
22
High Lift
–
–
–
–
–
–
–
–
+581
+1'10"
+267
+11"
+666
+2'2"
+607
+1'11"
+35
+1.4"
+740
+2'5"
+581
+1'10"
+357
+1'2"
–3607***
–7,952
–3757***
–8,284
–3125***
–6,890
–3325***
–7,330
–502
–1,107
–102***
–224
Bucket Specifications
938M Operating Specifications with Buckets
Light Material
Pin On
Capacity – rated
Capacity – rated at 110% fill factor
17 Width: bucket
Nominal material density,
110% fill factor
9 Clearance: full lift, 45° dump
14 Reach: full lift, 45° dump
Reach: 2130 mm (7'0") clearance,
45° dump
Reach: level arm, level bucket
16 Dig depth
5 Length: overall
13 Height: overall
19 Turning radius: over bucket
Tipping load – straight, ISO 14397-1*
Tipping load – straight, rigid tire**
Tipping load – full turn, ISO 14397-1*
Tipping load – full turn, rigid tire**
Breakout force
Operating weight
m3
yd3
m3
yd3
mm
ft/in
kg/m3
lb/yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
3.8
5.0
4.2
5.5
2750
9'0"
1198
2,007
2633
8'7"
1232
4'0"
1631
5'4"
2723
8'11"
100
3.9"
7875
25'10"
5418
17'9"
6198
20'4"
11 794
26,002
12 286
27,085
10 015
22,078
10 654
23,487
11 603
25,581
16 270
35,870
4.2
5.5
4.6
6.0
2750
9'0"
1068
1,813
2571
8'5"
1294
4'2"
1654
5'5"
2812
9'2"
100
3.9"
7964
26'1"
5507
18'0"
6227
20'5"
11 637
25,654
12 122
26,723
9870
21,758
10 499
23,147
10 331
22,775
16 347
36,039
Fusion
5.0
6.5
5.5
7.2
2750
9'0"
897
1,510
2571
8'5"
1294
4'2"
1654
5'5"
2812
9'2"
100
3.9"
7964
26'1"
5786
18'11"
6227
20'5"
11 636
25,653
12 121
26,722
9866
21,750
10 495
23,138
10 292
22,690
16 394
36,143
3.8
5.0
4.2
5.5
2750
9'0"
1141
1,912
2596
8'6"
1268
4'1"
1644
5'4"
2775
9'1"
101
4"
7928
26'0"
5450
17'10"
6216
20'4"
11 289
24,887
11 759
25,924
9542
21,037
10 152
22,380
11 122
24,519
16 694
36,802
4.2
5.5
4.6
6.0
2750
9'0"
1019
1,730
2534
8'3"
1331
4'4"
1666
5'5"
2864
9'4"
101
4"
8016
26'3"
5539
18'2"
6244
20'5"
11 151
24,582
11 615
25,607
9416
20,759
10 017
22,084
9942
21,918
16 757
36,943
ISO 23727
5.0
6.5
5.5
7.2
2750
9'0"
853
1,437
2534
8'3"
1331
4'4"
1666
5'5"
2864
9'4"
101
4"
8016
26'3"
5820
19'1"
6244
20'5"
11 120
24,515
11 583
25,537
9383
20,686
9982
22,007
9888
21,798
16 835
37,114
4.2
5.4
4.5
5.9
2750
9'0"
1005
1,693
2468
8'1"
1362
4'5"
1650
5'4"
2932
9'7"
125
4.9"
8105
26'7"
5614
18'5"
6258
20'6"
10 728
23,652
11 175
24,637
9059
19,972
9638
21,247
9023
19,891
16 653
36,713
5.0
6.5
5.5
7.2
2750
9'0"
822
1,384
2417
7'11"
1413
4'7"
1664
5'5"
3004
9'10"
125
4.9"
8177
26'9"
5902
19'4"
6282
20'7"
10 713
23,617
11 159
24,601
9040
19,930
9617
21,202
8977
19,791
16 713
36,845
High Lift
–
–
–
–
–
–
–
–
+598
+1'11"
+292
+11"
+695
+2'3"
+607
+1'11"
+35
+1.4"
+740
+2'5"
+581
+1'10"
+365
+1'2"
–3443***
–7,591
–3586***
–7,907
–2986***
–6,583
–3177***
–7,004
–437
–963
–102***
–224
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
***938M High Lift is configured with standard counterweight.
23
Bucket Selection Tables
115% 75%
Roc
k, 25
110% Sa
% Ea
nd a
rth
nd G
rave
l, W
et
t
110% Gra
vel,
Pitru
n
1850
1925
2000
2075
2150
(2,991)
(3,117)
(3,244)
(3,370)
(3,496)
(3,623)
115%
Log/Agg
Heavy
yd
(2.7)
Log/Agg
Heavy
Standard
(3.0)
Log/Agg
Heavy
Standard
(3.3)
Log/Agg
Heavy
Log/Agg
Heavy
Standard
115%
110%
115%
Log/Agg
Heavy
Counter­
weight
(3.3) (3.0) (2.7)
110% Sand
, We
1775
(2,865)
Log/Agg
Heavy
115%
115%
110%
115%
110%
105%
110%
105%
100%
110%
105%
105%
100%
115%
115%
115%
115%
115%
kg/m3
lb/yd3
110%
105%
100%
110%
105%
105%
100%
1400
(2,359)
1475
(2,485)
1550
(2,612)
115%
115%
115%
110%
105%
115%
110%
115%
1850
(3,117)
1925
(3,244)
115%
2000
(3,370)
2075
(3,496)
110%
105%
105%
100%
100%
115%
110%
105%
115%
110%
110%
105%
105%
100%
100%
2150
(3,623)
100%
100%
105%
100%
100%
100%
115%
Log/Agg
Heavy
100%
100%
100%
1775
(2,991)
115%
Log/Agg
Heavy
100%
115%
110%
105%
110%
115%
110%
105%
110%
1700
(2,865)
105%
105%
105%
100%
1625
(2,738)
115%
105%
100%
100%
110%
110%
115%
110%
110%
110%
105%
100%
Log/Agg
Heavy
115%
115%
110%
110%
105%
110%
105%
105%
100%
100%
110%
110%
105%
100%
105%
105%
100%
100%
100%
1475
1550
1625
1700
1775
1850
1925
2000
2075
2150
(2,359)
(2,485)
(2,612)
(2,738)
(2,865)
(2,991)
(3,117)
(3,244)
(3,370)
(3,496)
(3,623)
115%
110%
(3.3)
1400
lb/yd3
Log/Agg
Heavy
Standard
(3.5)
kg/m3
weight
Log/Agg
Heavy
Standard
(3.8)
Counter­
Log/Agg
Heavy
Standard
(3.3)
yd
50%
E
1700
(2,738)
136%
yd3
1625
(2,612)
(3.0) (2.7) (2.5)
1550
(2,485)
(2.5)
1475
(2,359)
(3.0) (2.7)
1400
lb/yd3
Log/Agg
Heavy
(3.8) (3.5)
1.9
2.1
kg/m3
weight
Log/Agg
Heavy
3
Pin On
2.3
1.9
2.1
2.3
2.3
2.7
2.7
2.9
Fusion
2.5
2.9
Pin On
2.5
m3
2.5
Fusion
2.1
2.5
Pin On
2.1
m3
2.3
Fusion
926M
930M
938M
Tip Load
Full Turn*
Counter­
Log/Agg
Heavy
3
m3
Fill Factor %
115% 50
%R
ock,
Material Type
arth
105% S
and
105% Cla , Dry an
d
y an
d Gr Loose
avel
, Dry
110% C
lay,
105% Sa Natura
l Be
ndst
d, D
105% Lime one
ry
ston
e
,
Crus
110% C
he d
lay a
105% Sa nd Grav
nd a
el, W
et
115% 25% nd Clay
Roc
k, 75 , Loose
105% Gy
% Ea
psu
rth
105% Gra m, Crus
hed
nite
,
B
C
110% lay, N roke
atur n
al B
105% S
ed, W
and
et
a
110% San nd Gra
vel,
d, D
amp
Dry
General Purpose Bucket Selection – Standard Lift
Log/Agg
Heavy
Log/Agg
Heavy
115%
115%
115%
110%
115%
110%
105%
115%
110%
105%
100%
110%
105%
100%
110%
110%
105%
110%
105%
105%
115%
115%
110%
110%
105%
100%
100%
100%
105%
100%
100%
100%
115%
115%
105%
115%
115%
115%
110%
105%
115%
110%
110%
115%
110%
105%
110%
105%
105%
100%
100%
105%
100%
100%
105%
100%
100%
100%
kg
lb
8318
7894
(18,338)
(17,403)
8257
7836
(18,204)
(17,275)
8156
7737
(17,980)
(17,057)
7942
7524
(17,509)
(16,587)
7862
7445
(17,333)
(16,413)
7783
7371
(17,159)
(16,250)
kg
lb
9295
8873
8366
(20,491)
(19,561)
(18,444)
9186
8769
8262
(20,252)
(19,332)
(18,213)
9055
8639
8135
(19,962)
(19,045)
(17,934)
8883
8469
(19,583)
(18,670)
8804
8390
(19,410)
(18,497)
8690
8278
(19,158)
(18,249)
kg
lb
10 925
10 517
10 015
(24,085)
(23,186)
(22,079)
10 832
10 426
9925
(23,881)
(22,985)
(21,881)
10 753
10 350
9854
(23,706)
(22,817)
(21,724)
10 430
10 028
(22,994)
(22,107)
10 341
9938
(22,798)
(21,909)
10 266
9864
(22,632)
(21,746)
Material density, fill factor, and counterweight options are key variables when choosing the appropriate size of the bucket. The long floor
and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized linkage will demonstrate
fill factors greater than 100% ISO rated. Refer to the expected fill factor % per material type at the top of the table and find a matching
counterweight and fill factor along the side for proper bucket sizing.
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
24
Bucket Selection Tables
yd3
se
110% Coa
l Ant
hrac
110% Ear
ite, R
th, Lo
am, D aw
105% Sal
ry
t, Fin
110% Hea e
vy M
etal
Scra
p, Lo
o
110% Coa
l An
110% Gyp thracite,
Was
sum,
h
Pulv
110% Pea
erize ed
t, We
d
t
105% Sug
ar, R
aw C
ane
105% Fer
tilize
r, Mi
xed
s, Ra
inou
1030
1075
1120
1165
1210
1255
(1,660)
(1,736)
(1,811)
(1,887)
(1,963)
(2,039)
(2,115)
Log/Agg
Heavy
Log/Agg
Heavy
115%
115%
115%
Log/Agg
Heavy
Log/Agg
Heavy
(4.6)
Log/Agg
Heavy
Standard
110%
110%
105%
105%
100%
110%
105%
105%
115%
115%
110%
110%
105%
100%
105%
805
(1,356)
kg/m3
lb/yd3
850
(1,432)
115%
110%
940
(1,584)
115%
115%
115%
110%
105%
105%
100%
110%
105%
105%
100%
100%
100%
100%
895
(1,508)
110%
115%
110%
100%
100%
110%
105%
110%
100%
100%
100%
115%
115%
105%
105%
110%
105%
985
(1,660)
115%
115%
110%
115%
110%
110%
105%
105%
100%
105%
100%
100%
1030
(1,736)
1075
(1,811)
1120
(1,887)
115%
110%
105%
110%
105%
100%
105%
100%
100%
1165
(1,963)
105%
100%
1210
(2,039)
1255
(2,115)
100%
100%
115%
110%
105%
100%
Log/Agg
Heavy
Log/Agg
Heavy
115%
Counter­
kg/m3
805
850
895
940
985
1030
1075
1120
1165
1210
1255
weight
lb/yd3
(1,356)
(1,432)
(1,508)
(1,584)
(1,660)
(1,736)
(1,811)
(1,887)
(1,963)
(2,039)
(2,115)
110%
115%
Log/Agg
Heavy
115%
110%
115%
110%
105%
115%
110%
105% 100%
110%
105%
105%
105%
100%
100%
100%
100%
Log/Agg
Heavy
(5.5)
Log/Agg
Heavy
Standard
Log/Agg
Heavy
Standard
115%
115%
115%
115%
110%
115%
110%
110%
105%
105%
100%
115%
110%
105%
100%
100%
110%
115%
110%
110%
105%
105%
100%
Log/Agg
Heavy
115%
115%
115%
110%
110%
105%
105%
100%
100%
115%
110%
110%
105%
105%
100%
110%
100%
100%
110%
105%
100%
105%
105%
105%
105%
100%
115%
110%
115%
Log/Agg
Heavy
Log/Agg
Heavy
115%
110%
115%
Standard
(6.5)
(5.0)
yd
(5.0) (4.6)
Log/Agg
Heavy
Standard
115%
110%
115%
115%
110%
110%
(5.5)
Log/Agg
Heavy
Standard
(5.0)
Counter­
weight
(5.5)
yd
Bitum
985
(1,584)
(4.6) (4.1)
940
(1,508)
(5.0)
895
(1,432)
(4.1)
850
(1,356)
(5.0) (4.6)
805
lb/yd3
Log/Agg
Heavy
(6.5) (5.5) (5.0)
3.1
3.5
kg/m3
weight
Log/Agg
Heavy
3
Pin On
3.8
3.1
3.5
3.8
3.8
4.2
4.2
5.0
Fusion
3.8
5.0
Pin On
3.8
m3
4.2
Fusion
3.5
4.2
Pin On
3.5
m3
3.8
Fusion
926M
930M
938M
Counter­
3
m3
Fill Factor %
110% Coa
l
Material Type
w
100% Bul
k Gr
110% Con ain
stru
115% Sila ction and
ge,
Dem
olitio
110% Ma Packed
n
nure
/
M
u
110% Coa
ck, W
l Bit
et
110% Pea uminous
, Wa
t, Mo
shed
ist
Light Material Bucket Selection – Standard Lift
105%
100%
100%
Tip Load
Full Turn*
kg
lb
7880
7463
(17,372)
(16,453)
7735
7321
(17,052)
(16,140)
7600
7190
(16,755)
(15,850)
7533
7124
(16,607)
(15,705)
7364
6957
(16,234)
(15,337)
7235
6830
(15,950)
(15,057)
kg
lb
8750
8337
7840
(19,290)
(18,379)
(17,284)
8603
8198
7706
(18,966)
(18,073)
(16,989)
8484
8077
7585
(18,704)
(17,806)
(16,722)
8365
7960
(18,441)
(17,548)
8231
7825
(18,145)
(17,251)
8106
7707
(17,870)
(16,991)
kg
lb
10 412
10 015
9523
(22,954)
(22,079)
(20,994)
10 265
9870
9383
(22,630)
(21,759)
(20,685)
10 260
9866
9380
(22,619)
(21,750)
(20,679)
9933
9542
(21,898)
(21,036)
9811
9416
(21,629)
(20,759)
9770
9383
(21,539)
(20,685)
Material density, fill factor, and counterweight options are key variables when choosing the appropriate size of the bucket. The long floor
and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized linkage will demonstrate
fill factors greater than 100% ISO rated. Refer to the expected fill factor % per material type at the top of the table and find a matching
counterweight and fill factor along the side for proper bucket sizing.
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
25
Bucket Selection Tables
yd3
, Dry
1390
1435
1480
(2,266)
(2,342)
(2,418)
(2,494)
Not Available
Log/Agg
Heavy
Not Available
Log/Agg
Heavy
Not Available
yd
l Bed
1345
(2,191)
Log/Agg
Heavy
Counter­
weight
Log/Agg
Heavy
115%
115%
115%
110%
110%
105%
115%
115%
kg/m
lb/yd3
3
100%
100%
100%
110%
105%
110%
100%
105%
100%
105% 100%
110%
1030
(1,736)
105%
110%
105%
115%
1075
(1,811)
1120
(1,887)
1165
(1,963)
1210
(2,039)
1255
(2,115)
1300
(2,191)
1345
(2,266)
1390
(2,342)
1435
(2,418)
1480
(2,494)
110%
115%
Standard
(3.0)
115%
Log/Agg
Heavy
Standard
Not Available
Log/Agg
Heavy
Standard
Not Available
Log/Agg
Heavy
Not Available
Log/Agg
Heavy
Not Available
Log/Agg
Heavy
Not Available
115%
115%
115%
115%
110%
110%
105%
105%
100%
100%
100%
115%
110%
100%
105%
100%
100%
115%
115%
105%
105%
110%
110%
105%
110%
105%
110%
110%
105%
105%
100%
100%
100%
Counter­
kg/m
1030
1075
1120
1165
1210
1255
1300
1345
1390
1435
1480
weight
lb/yd3
(1,736)
(1,811)
(1,887)
(1,963)
(2,039)
(2,115)
(2,191)
(2,266)
(2,342)
(2,418)
(2,494)
Log/Agg
Heavy
kg
lb
5970
(13,161)
5926
(13,065)
5837
(12,869)
5628
(12,407)
5561
(12,259)
5497
(12,118)
kg
lb
6384
5989
(14,074)
(13,203)
6297
5906
(13,883)
(13,021)
6185
5795
(13,635)
(12,775)
6014
(13,259)
5952
(13,122)
5860
(12,919)
kg
lb
7370
(16,248)
7301
(16,095)
7244
(15,970)
6940
(15,300)
6869
(15,143)
6815
(15,024)
Not Available
(3.3)
(2.7)
110% Cla
y, Na
tura
1300
(2,115)
Not Available
(3.3) (3.0) (2.7)
105% San
d, D
105% Cla ry and Lo
y and
ose
Grav
e l, D
ry
1255
(2,039)
Log/Agg
Heavy
yd
e
1210
(1,963)
Not Available
3
Not Available
Not Available
Standard
(3.5)
115%
Log/Agg
Heavy
Standard
Not Available
Not Available
(3.8)
(3.3)
110% Sha
l
1165
(1,887)
Log/Agg
Heavy
Log/Agg
Heavy
Standard
Not Available
Not Available
Log/Agg
Heavy
Not Available
Not Available
115%
115%
110%
110%
115%
Log/Agg
Heavy
Standard
Not Available
Not Available
Log/Agg
Heavy
Standard
Not Available
Not Available
115%
110%
115%
105%
110%
100%
110%
105%
105%
100%
100%
105%
Standard
(3.5)
(3.3)
110%
110%
105%
110%
Coal
An th
racit
Gyps
um, P e, Washe
ulv
d
Peat
, We erized
t
1120
(1,811)
(3.0) (2.7) (2.5)
1075
(1,736)
(3.0) (2.7) (2.5)
1030
lb/yd3
(3.8)
1.9
2.1
kg/m3
weight
Not Available
3
Tip Load
Full Turn*
Counter­
Log/Agg
Heavy
3
Pin On
2.3
1.9
2.1
Fusion
2.3
2.3
Pin On
2.5
2.1
Fusion
2.3
2.7
Pin On
2.9
2.5
2.7
Fusion
2.9
938M High Lift
2.5
m3
2.5
930M High Lift
2.1
m3
926M High Lift
m3
Fill Factor %
110%
110%
110%
105% Fer
ti
lizer,
Mixe
d
Material Type
Coal
Anth
Earth racite, R
a
, Loa
m, Dr w
Salt,
y
Fine
Heav
y Me
tal S
crap
, Loo
se
General Purpose Bucket Selection – High Lift
105%
110%
100%
105%
100%
100%
Material density, fill factor, and counterweight options are key variables when choosing the appropriate size of the bucket. The long floor
and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized linkage will demonstrate
fill factors greater than 100% ISO rated. Refer to the expected fill factor % per material type at the top of the table and find a matching
counterweight and fill factor along the side for proper bucket sizing.
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
26
Bucket Selection Tables
yd3
110% Ma
nure
/Muc
k, W
et
700
730
760
790
820
850
(1,129)
(1,180)
(1,230)
(1,281)
(1,331)
(1,382)
(1,432)
110%
580
(977)
115%
Log/Agg
Not Available
Heavy
115%
Log/Agg
Not Available
Heavy
115%
110%
yd
(4.6)
Log/Agg
Not Available
Heavy
Standard
(5.0)
Log/Agg
Not Available
Heavy
Standard
(5.5)
Log/Agg
Not Available
Heavy
Standard
115%
kg/m3
lb/yd3
110%
105%
105%
115%
550
(927)
105%
110%
610
(1,028)
100%
640
(1,078)
670
(1,129)
700
(1,180)
730
(1,230)
115%
115%
115%
115%
110%
105%
110%
110%
105%
105%
110%
850
(1,432)
100%
105%
105%
105%
100%
820
(1,382)
790
(1,331)
100%
100%
100%
115%
Log/Agg
Not Available
Heavy
115%
105%
110%
110%
760
(1,281)
100%
Log/Agg
Not Available
Heavy
Log/Agg
Not Available
Heavy
115%
100%
105%
100%
115%
110%
100%
100%
110%
105%
105%
110%
100%
115%
Log/Agg
Not Available
Heavy
Counter­
weight
(5.5) (5.0) (4.6)
100% Wh
eat,
110% Con Bulk
stuc
115% Sila tion and
D
ge, P
acke emolition
d
670
(1,078)
Log/Agg
Not Available
Heavy
115%
110%
105%
110%
105%
100%
100%
100%
610
640
670
700
730
760
790
820
850
(977)
(1,028)
(1,078)
(1,129)
(1,180)
(1,230)
(1,281)
(1,331)
(1,382)
(1,432)
(5.0)
580
(927)
Log/Agg
Not Available
Heavy
Not Available
Standard
(5.5)
550
lb/yd3
Log/Agg
Not Available
Heavy
Not Available
Standard
(6.5)
kg/m3
weight
Log/Agg
Not Available
Heavy
Not Available
Standard
(5.0)
Counter­
Log/Agg
Not Available
Heavy
Not Available
Standard
(5.5)
yd
Asph
alt, C
Soy B rushed
eans
, Bul
Corn
k
Shel
led, B
Glas
ulk
s, Se
mi Cr ushe
d
640
(1,028)
(5.0) (4.6) (4.1)
610
(977)
(4.6) (4.1)
580
(927)
(5.0)
550
lb/yd3
Log/Agg
Not Available
Heavy
Not Available
Standard
(6.5)
3.1
3.5
3.8
3.1
3.5
kg/m3
weight
Log/Agg
Not Available
Heavy
3
3.8
4.2
4.2
5.0
Fusion
3.8
5.0
Pin On
3.8
m
3
4.2
3.8
3.5
4.2
3.8
3.5
m
3
Pin On
Fusion
930M High Lift
938M High Lift
Counter­
Log/Agg
Not Available
Heavy
3
Pin On
Fusion
926M High Lift
m3
Fill Factor %
110%
100%
100%
105%
115% Mu
lch, W
et
Material Type
100% Buc
kwhe
at, B
ulk
115% Mu
nicip
al So
lid W
aste
110% Flou
r, Wh
eat
115% Com
pac
100% Bar ted Solid
ley, B
Was
te
ulk
Light Material Bucket Selection – High Lift
Log/Agg
Not Available
Heavy
Not Available
Standard
115%
115%
115%
115%
110%
105%
110%
105%
115%
105%
100%
105%
100%
100%
115%
110%
110%
110%
105%
110%
100%
105%
100%
Tip Load
Full Turn*
kg
lb
5587
(12,317)
5467
(12,052)
5358
(11,812)
5273
(11,625)
5124
(11,296)
5024
(11,075)
kg
lb
5929
5544
(13,071)
(12,222)
5822
5442
(12,834)
(11,996)
5729
5342
(12,629)
(11,777)
5586
(12,315)
5480
(12,080)
5384
(11,870)
kg
lb
6977
(15,381)
6863
(15,129)
6840
(15,079)
6559
(14,459)
6460
(14,240)
6410
(14,131)
Material density, fill factor, and counterweight options are key variables when choosing the appropriate size of the bucket. The long floor
and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized linkage will demonstrate
fill factors greater than 100% ISO rated. Refer to the expected fill factor % per material type at the top of the table and find a matching
counterweight and fill factor along the side for proper bucket sizing.
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
27
Operating Specifications
Operating Specifications with Forks
7
2
Pallet Fork
Construction Fork
12
12
6
10
11
9
1
4
13
11
8
13
5
3
Pallet Fork – Fusion
926M
1 Fork tine length
2 Load center
3 Length: overall
4 Reach: ground
930M
930M
ft/in
4'0"
mm
1220
610
2'0"
610
2'0"
610
2'0"
762
2'6"
762
2'6"
762
2'5"
7875 25'10" 7882 25'10" 7942
26'0"
8298
27'2"
8305
27'2"
8366
27'5"
mm
1524
ft/in
5'0"
mm
1524
ft/in
5'0"
mm
1524
ft/in
5'0"
926
3'0"
926
3'0"
961
3'1"
1045
3'5"
1045
3'5"
1081
3'6"
47
1.9"
47
1.9"
44
1.7"
120
4.7"
120
4.7"
119
4.7"
1569
5'1"
1569
5'1"
1617
5'3"
1627
5'4"
1627
5'4"
1675
5'5"
2'6"
814
2'8"
825
2'8"
825
2'8"
872
2'10"
5'10"
1830
6'0"
1729
5'8"
1729
5'8"
1766
5'9"
12'1"
3758
12'3"
3630 11'10" 3630 11'10" 3693
12'1"
15'4"
4740
15'6"
4935
16'2"
4935
16'2"
0
0'0"
300
0'11"
300
0'11"
300
0'11"
300
0'11"
300
0'11"
5'1"
1566
5'1"
1566
5'1"
2498
8'2"
2498
8'2"
2498
8'2"
5'1"
1550
5'1"
1550
5'1"
2375
7'9"
2375
7'9"
2375
7'9"
767
2'6"
767
5'10"
1792
9 Clearance: full lift
10 Height: overall
11 Minimum fork spacing
3693
12'1"
3693
4676
15'4"
4676
300
0'11"
12 Carriage width
13 Maximum fork spacing
1566
1550
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
6756 14,895 7689 16,951 9274 20,445 6049 13,335 6919 15,254 8405 18,528
5807 12,801 6577 14,499 7909 17,437 5168 11,394 5887 12,978 7136 15,731
12 759 28,129 13 671 30,140 15 932 35,123 13 094 28,866 14 006 30,877 16 266 35,861
2903
6,400
3288
7,249
3955
8,718
2584
5,697
2943
6,489
3568
7,865
3484 7,680 3946 8,699 4746 10,462 3101
4645 10,240 5261 11,599 6327 13,949 4135
6,836
3532
7,786
4281
9,438
9,115
4709 10,382 5708 12,584
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
**Full compliance to EN474-3 and SAE J1197.
28
938M
mm
1220
1792
80% of tip: firm and level EN474-3**
ft/in
4'0"
926M
ft/in
4'0"
7 Reach: full lift
8 Clearance: level arm
60% of tip: rough terrain EN474-3**
938M
mm
1220
5 Dig depth
6 Reach: level arm
Tipping load – straight, ISO 14397-1*
Tipping load – full turn, ISO 14397-1*
Operating weight
Rated load % of full turn tip:
50% of tip: SAE J1197**
Construction Fork – Fusion
Operating Specifications
Operating Specifications with Material Handling Arm
4
3
2
1
8
7
6
5
9
10
13
11
12
22
19
18
20
21
14
15
16
17
Material Handling Arm – Fusion
1
926M
2113 mm
6'11"
930M
2113 mm
6'11"
938M
2144 mm
7'0"
12
926M
5327 mm
17'5"
930M
5327 mm
17'5"
938M
5376 mm
17'7"
2
2333 mm
7'7"
2333 mm
7'7"
2362 mm
7'8"
3
2919 mm
9'6"
2919 mm
9'6"
2943 mm
9'7"
13
1854 mm
6'0"
1854 mm
6'0"
1890 mm
6'2"
14
863 mm
2'9"
863 mm
2'9"
906 mm
2'11"
4
3505 mm
11'6"
3505 mm
11'6"
3525 mm
5
5257 mm
17'2"
5257 mm
17'2"
5343 mm
11'6"
15
1045 mm
3'5"
1045 mm
3'5"
1089 mm
3'6"
17'6"
16
1276 mm
4'2"
1276 mm
4'2"
1324 mm
4'4"
6
5568 mm
18'3"
5568 mm
18'3"
7
6112 mm
20'0"
6112 mm
20'0"
5655 mm
18'6"
17
1507 mm
4'11"
1507 mm
4'11"
1559 mm
5'1"
6204 mm
20'4"
18
1975 mm
6'5"
1975 mm
6'5"
1983 mm
8
6657 mm
21'10"
6657 mm
6'6"
21'10"
6754 mm
22'1"
19
2310 mm
7'6"
3354 mm
3727 mm
11'0"
12'2"
3403 mm
3775 mm
11'1"
12'4"
20
21
3076 mm
3842 mm
10'1"
12'7"
2310 mm
3076 mm
7'6"
10'1"
2316 mm
3081 mm
7'7"
10'1"
9
10
3354 mm
3727 mm
11'0"
12'2"
11
4527 mm
14'10"
3842 mm
12'7"
3846 mm
12'7"
4527 mm
14'10"
4575 mm
15'0"
22
5730 mm
18'9"
5737 mm
18'9"
5762 mm
18'10"
Operating weight
Rated load* (50% of full turn tip** SAE J1197)
Fixed tab (9)
Minimum extension (10)
Middle extension (11)
Maximum extension (12)
926M
12 626 kg
27,835 lb
2081 kg
1908 kg
1618 kg
1405 kg
4,588 lb
4,205 lb
3,567 lb
3,097 lb
930M
13 538 kg
29,847 lb
2356 kg
2159 kg
1832 kg
1590 kg
5,193 lb
4,760 lb
4,037 lb
3,505 lb
938M
15 799 kg
34,830 lb
2844 kg
2610 kg
2217 kg
1927 kg
6,269 lb
5,753 lb
4,887 lb
4,248 lb
**Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
**Full compliance to EN474-3 and SAE J1197.
29
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On
7
Fusion
4
5
3
2
8
ISO 23727
6
1
Rated Capacity
Capacity – Rated at 110%
Fill Factor
Bucket Width
Nominal Material Density
110% Fill Factor
1 Length: Overall
2 Dump Clearance:
Full Lift Rolled Out
3 Clearance: Level Bucket
4 Height: Overall
5 Reach: Full Lift Rolled Out
6 Dig Depth
7 Maximum Dump Angle
8 Rack Angle at Carry
Tipping Load –
Straight ISO 14397-1*
Tipping Load –
Straight Rigid Tire**
Tipping Load –
Full Turn ISO 14397-1*
Tipping Load –
Full Turn Rigid Tire**
Breakout Force
Operating Weight
m3
yd3
m3
yd3
mm
ft/in
kg/m3
lb/yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
degree
degree
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
926M
3.0
4.0
3.3
4.4
2528
8'3"
962
1,604
7907
25'11"
4252
13'11"
4592
15'0"
6255
20'6"
1425
4'8"
80
3.2"
52
43
7560
16,666
7875
17,360
6404
14,117
6812
15,018
6560
14,463
13 531
29,830
Pin On
930M
3.5
4.6
3.9
5.0
2728
8'11"
946
1,605
7914
25'11"
4252
13'11"
4592
15'0"
6298
20'7"
1425
4'8"
80
3.2"
52
43
8637
19,041
8997
19,834
7281
16,051
7746
17,076
8584
18,925
14 534
32,042
938M
4.1
5.4
4.5
5.9
3030
9'11"
1062
1,790
8044
26'4"
4264
13'11"
4647
15'2"
6367
20'10"
1489
4'10"
96
3.8"
51
55
11 395
25,120
11 869
26,167
9580
21,119
10 191
22,467
9491
20,923
17 014
37,509
926M
3.0
3.9
3.3
4.3
2528
8'3"
954
1,615
7913
25'11"
4275
14'0"
4606
15'1"
6268
20'6"
1421
4'7"
100
3.9"
50
45
7465
16,457
7776
17,143
6299
13,886
6701
14,773
6727
14,829
13 834
30,499
Fusion
930M
3.5
4.6
3.9
5.0
2728
8'11"
915
1,553
7986
26'2"
4332
14'2"
4609
15'1"
6315
20'8"
1458
4'9"
100
3.9"
49
45
8389
18,495
8739
19,265
7043
15,528
7493
16,519
8373
18,458
14 836
32,706
938M
4.1
5.4
4.5
5.9
3032
9'11"
916
1,544
8126
26'7"
4354
14'3"
4725
15'6"
6446
21'1"
1530
5'0"
116
4.6"
49
46
9903
21,832
10 315
22,741
8266
18,223
8794
19,386
8959
19,750
17 427
38,419
926M
3.0
3.9
3.3
4.3
2528
8'3"
885
1,498
8176
26'9"
4399
14'5"
4751
15'7"
6413
21'0"
1613
5'3"
94
3.7"
55
43
6941
15,301
7230
15,938
5844
12,884
6217
13,706
5500
12,125
13 793
30,409
ISO 23727
930M 938M
3.5
4.1
4.6
5.4
3.9
4.5
5.0
5.9
2728 3032
8'11" 9'11"
867
878
1,473 1,480
8183 8313
26'10" 27'3"
4523 4539
14'10" 14'10"
4849 4904
15'10" 16'1"
6555 6605
21'6" 21'8"
1561 1626
5'1"
5'4"
94
109
3.7"
4.3"
48
48
43
44
7967 9494
17,564 20,931
8299 9890
18,295 21,803
6680 7921
14,726 17,462
7106 8426
15,666 18,577
7258 7845
16,000 17,295
14 795 17 327
32,616 38,199
926M
–
–
–
–
–
–
–
–
+642
+2'1"
+440
+1'5"
+451
+1'5"
+451
+1'5"
+253
+0'9"
+35
+1.4"
–
–
–1946
–4,290
–2027
–4,469
–1717
–3,784
–1826
–4,026
–361
–795
+278
612
***Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
***Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
***938M High Lift is configured with standard counterweight.
30
High Lift
930M
938M
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
+794
+737
+2'7"
+2'5"
+568
+545
+1'10" +1'9"
+574
+553
+1'10" +1'9"
+574
+553
+1'10" +1'9"
+329
+278
+1'0" +0'10"
+35
+35
+1.4"
+1.4"
–
–
–
–
–2473 –3161***
–5,450 –6,966
–2576 –3292***
–5,677 –7,256
–2171 –2742***
–4,784 –6,043
–2309 –2917***
–5,089 –6,429
–219
–369
–482
–812
+232 –102***
511
–224
Bucket Selection Tables
yd3
shed
, Wa
c ite
th r a
110% Co
a
105% Fer
tiliz
ar, R
105% Su
g
l An
aw C
er, M
ix e d
ane
Ra w
115%
115%
115%
115% 110% 105%
Log/Agg
Heavy
115% 110% 105%
(3.9)
Counter­
weight
115%
110%
105%
110%
105%
100%
110%
105%
105%
100%
100%
100%
100%
115%
115%
115% 110% 105%
110%
110% 105%
115%
105%
110%
110%
105%
105%
100%
100%
100%
100%
100%
115% 110% 105% 100%
kg/m3
lb/yd3
560
(944)
620
(1,045)
680
(1,146)
740
(1,247)
800
(1,348)
860
(1,449)
920
(1,550)
115%
115%
115%
110%
110%
105%
115%
110%
105%
980
(1,651)
110%
105%
1040
(1,752)
105%
100%
1100
(1,854)
1160
(1,955)
100%
100%
100%
115%
110% 105%
105% 100%
115%110%
115%
115%
110%
115% 110% 105%
110% 105% 100%
105%
100%
100%
110% 105% 100%
Log/Agg
Heavy
115%
115% 110% 105%
Log/Agg
Heavy
Log/Agg
Heavy
110%
100%
115%
Log/Agg
Heavy
(4.6)
(6.5) (5.4) (4.6)
ous,
(1,955)
Log/Agg
Heavy
Standard
115%
115%
110%
105%
115%
110%
105%
110%
105%
100%
100%
100%
100%
110% 105% 100%
115% 110% 105% 100%
kg/m3
560
620
680
740
800
860
920
980
1040
1100
1160
weight
lb/yd3
(944)
(1,045)
(1,146)
(1,247)
(1,348)
(1,449)
(1,550)
(1,651)
(1,752)
(1,854)
(1,955)
(5.4)
Counter­
Log/Agg
Heavy
Standard
(6.5)
yd
umin
1160
(1,854)
Log/Agg
Heavy
Standard
Log/Agg
Heavy
Standard
(6.5) (5.4)
3.0
l Bit
1100
(1,752)
(5.4)
yd
3
3.5
m3
4.1
4.1
110% Co
a
1040
(1,651)
(3.9)
980
(1,550)
(5.4) (4.6)
920
(1,449)
(3.9)
860
(1,348)
(5.4) (4.6)
800
(1,247)
Log/Agg
Heavy
Standard
3
Pin On
740
(1,146)
4.1
3.5
m3
3.0
3.5
4.1
3.5
4.1
Pin On
680
(1,045)
Log/Agg
Heavy
5.0
Fusion
620
(944)
Log/Agg
Heavy
5.0
Pin On
560
lb/yd3
Log/Agg
Heavy
5.0
Fusion
kg/m3
weight
Log/Agg
Heavy
4.1
Fusion
926M
930M
938M
Tip Load
Full Turn*
Counter­
3.0
m3
Fill Factor %
115% Mu
n ic i
pal S
110% Flo
ur, W olid Wa
ste
heat
115% Co
mpa
c te d
100% Ba
So li
r le y
dW
, Bu
aste
lk
115% Mu
l c h,
Wet
Material Type
110% As
phal
t, Cr
ushe
100% So
y Be
d
ans,
100% Co
Bulk
rn S
h e ll
ed, B
105% Gla
ulk
ss, S
emi
100% Bu
Cr u s
lk G
hed
r a in
110% Co
nstr
u c ti
on a
115% Sil
nd D
age,
emo
Pac
litio
110% Ma
ked
n
n ure
/
M
uck,
110% Co
al B
W
e
t
itu m
inou
110% Pe
a t, M
s, W
ashe
oist
d
High Dump Bucket Selection – Standard Lift
115%
115% 110% 105%
115%
115%
110%
105%
100%
115%
110% 105% 100%
110% 105% 100%
115%
Log/Agg
Heavy
Log/Agg
Heavy
115%
110%
115%
110%
105%
115% 110% 105%
115%
100%
100%
110%
110%
105%
105%
100%
100%
110%
105%
100%
105%
100%
100%
kg
lb
6792
6404
(14,973)
(14,118)
6720
6328
(14,815)
(13,950)
6298
5913
(13,883)
(13,035)
6690
6299
(14,748)
(13,886)
6482
6097
(14,290)
(13,441)
6076
5689
(13,395)
(12,542)
kg
lb
7672
7281
6811
(16,913)
(16,051)
(15,015)
7241
6855
6396
(15,962)
(15,113)
(14,100)
7020
6636
6180
(15,476)
(14,629)
(13,624)
7427
7043
(16,373)
(15,527)
7011
6634
(15,456)
(14,625)
6860
6481
(15,123)
(14,288)
kg
lb
9988
9580
9077
(22,018)
(21,120)
(20,012)
8750
8384
7930
(19,290)
(18,483)
(17,482)
8635
8266
(19,036)
(18,222)
8480
8112
(18,695)
(17,883)
Material density, fill factor, and counterweight options are key variables when choosing the appropriate size of the bucket. The long floor
and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized linkage will demonstrate
fill factors greater than 100% ISO rated. Refer to the expected fill factor % per material type at the top of the table and find a matching
counterweight and fill factor along the side for proper bucket sizing.
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
31
Bucket Selection Tables
(3.9) yd3
100% So
y Be
ans,
100% Co
Bulk
rn S
helle
d, B
105% Gla
ulk
ss, S
emi
Crus
hed
100% Bu
lk Gr
ain
110% As
phalt
, Cru
shed
115% Mu
nicip
al So
110% Flo
lid W
ur, W
aste
heat
115% Co
mpa
cted
100% Ba
Solid
rley,
Wa s
Bulk
te
t
115% Mu
lch,
We
570
615
660
705
750
795
(885)
(960)
(1,036)
(1,112)
(1,188)
(1,264)
(1,340)
Not Available
Log/Agg
Heavy
Not Available
Log/Agg
Heavy
Not Available
Log/Agg
Heavy
Not Available
Log/Agg
Heavy
Not Available
115%
115%
110%
105%
110%
105%
100%
100%
115% 110% 105% 100%
115%
115%
110%
105%
110%
105%
100%
100%
yd
Not Available
(4.6)
Log/Agg
Heavy
Standard
Not Available
(5.4)
Log/Agg
Heavy
Standard
Log/Agg
Heavy
Standard
Not Available
(6.5)
115% 110% 105% 100%
Counter­
weight
Log/Agg
Heavy
Not Available
Log/Agg
Heavy
Not Available
Log/Agg
Heavy
Not Available
(6.5) (5.4) (4.6)
110% Wo
odch
ips,
Dry
525
(809)
Log/Agg
Heavy
kg/m
lb/yd3
345
(581)
3
390
(657)
435
(733)
480
(809)
525
(885)
570
(960)
615
(1,036)
115%
115%
115%
115%
110% 105%
110%
660
(1,112)
110%
105%
705
(1,188)
105%
750
(1,264)
795
(1,340)
100%
100%
100%
110% 105% 100%
115% 110%105% 100%
115% 110%105% 100%
115%
115%
110%
105%
100%
110% 105% 100%
115% 110%105% 100%
Counter­
kg/m
weight
lb/yd3
(5.4)
Log/Agg
Heavy
Standard
Not Available
Not Available
(6.5)
3
Log/Agg
Heavy
Standard
Not Available
Not Available
(5.4)
yd
110% Gla
ss, W
hole
105% Bre
Bott
we r
les
s Gr
ain
480
(733)
(5.4) (4.6)
435
(657)
(3.9)
390
(581)
(5.4) (4.6)
345
lb/yd3
Log/Agg
Heavy
Standard
Not Available
Not Available
(6.5)
3.0
kg/m3
weight
Not Available
3
3.5
Counter­
Log/Agg
Heavy
H
3
Pin On
4.1
3.0
3.5
Fusion
3.5
4.1
Pin On
5.0
3.5
Fusion
4.1
4.1
Pin On
5.0
Fusion
4.1
5.0
938M High Lift
m3
5.0
930M High Lift
m3
4.1
926M High Lift
m3
Fill Factor %
Scra
ps
Material Type
115% Foo
d
115% Pa
per,
Sem
i Com
115% Yar
dW
pact
aste
ed
High Dump Bucket Selection – High Lift
Log/Agg
Heavy
Standard
Not Available
Not Available
345
390
435
480
525
570
615
660
705
750
795
(581)
(657)
(733)
(809)
(885)
(960)
(1,036)
(1,112)
(1,188)
(1,264)
(1,340)
115%
115% 110% 105%
100%
115% 110% 105%
115% 110% 105% 100%
100%
110%
105%
100%
Tip Load
Full Turn*
kg
lb
4736
(10,441)
4655
(10,262)
4272
(9,418)
4584
(10,105)
4424
(9,753)
4043
(8,912)
kg
lb
5110
4746
(11,265)
(10,463)
4723
4362
(10,412)
(9,617)
4560
4200
(10,053)
(9,259)
4872
(10,740)
4494
(9,906)
4370
(9,634)
kg
lb
6412
(14,136)
5700
(12,566)
5527
(12,184)
5390
(11,882)
Material density, fill factor, and counterweight options are key variables when choosing the appropriate size of the bucket. The long floor
and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized linkage will demonstrate
fill factors greater than 100% ISO rated. Refer to the expected fill factor % per material type at the top of the table and find a matching
counterweight and fill factor along the side for proper bucket sizing.
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
32
Supplemental Specifications
Optional Equipment
926M
Operating
weight
930M
Tipping load –
full turn
Operating
weight
938M
Tipping load –
full turn
Operating
weight
Tipping load –
full turn
Change with options removed:
Heavy counterweight
Guard, crankcase
Guard, power train lower
Guard, driveshaft
Secondary steer
Ride control
kg
N/A
–11
–77
–44
–69
–49
lb
N/A
–23
–170
–96
–152
–108
kg
N/A
–16
–77
–12
–75
–27
lb
N/A
–34
–168
–26
–165
–59
kg
–320
–11
–77
–44
–69
–49
lb
–705
–23
–170
–96
–152
–108
kg
–502
–13
–69
–12
–73
–26
lb
–1,107
–29
–151
–26
–160
–57
kg
–320
–11
–68
–45
–69
–49
lb
–705
–24
–150
–100
–152
–108
kg
–494
–17
–67
–12
–74
–27
lb
–1,089
–36
–146
–27
–163
–59
Change with options added:
Logger/Aggregate counterweight
Guard, front window
Guard, rear waste gate
Guard, power train side
Cold start package
Roading fenders
+298
+34
N/A
+11
+54
+18
+656
+74
N/A
+24
+119
+39
+417
+17
N/A
+10
+104
+28
+919
+37
N/A
+22
+229
+61
+298
+34
+264
+11
+54
+18
+656
+74
+582
+24
+119
+39
+415
+18
+456
+9
+74
+24
+914
+39
+1,005
+19
+163
+52
+299
+34
+284
+11
+54
+18
+659
+74
+626
+24
+119
+39
+402
+18
+478
+10
+101
+28
+886
+39
+1,053
+22
+222
+61
Tire Options
926M
Change with tire option as
compared to 20.5R25 L3 tire
Vertical heights
Reach: bucket at 45°
Width: Over tires
Turning radius: Outside of tires
Tipping load – straight
Tipping load – full turn
Operating weight
550/65 R25
930M
17.5 R25 (L-3)
600/65 R25
938M
20.5R25 (L-5)
23.5R25 R25*
Flexport**
mm
–70
+43
+10
+0
in
–2.8"
+1.7"
+0.4"
+0"
mm
–65
+73
–69
–45
in
–2.6"
+2.9"
–2.7"
–1.8"
mm
–15
+29
+98
+42
in
–0.6"
+1.1"
+3.9"
+1.7"
mm
+35
–21
0
+1
in
+1.4"
–0.8"
0"
0"
mm
65
–63
+38
+14
in
–2.6"
–2.5"
+1.5"
+0.6"
mm
+59
–23
–12
+23
in
+2.3"
–0.9"
–0.5"
+0.9"
kg
–83
–72
–126
lb
–182
–157
–277
kg
–212
–183
–322
lb
–466
–403
–709
kg
+9
+8
+14
lb
+19
+17
+30
kg
+444
+384
+678
lb
+978
+846
+1,494
kg
+486
+421
+748
lb
kg
lb
+1,071 +1564 +3,447
+927 +1352 +2,979
+1,648 +2405 +5,300
**938M compatible with standard counterweight for general construction and heavy counterweight for Aggregate or Forest Handlers.
**938M compatible with standard counterweight (Flexport) only.
33
Supplemental Specifications
Ground Engagement Options
Bolt-on Cutting Edge
Long Teeth and Segments
926M
Change with Ground Engagement
option compared to Bolt-on
Cutting Edge
Dig depth
Length: overall
Dump clearance
Reach
Tipping Load – straight
Tipping Load – full turn
Breakout force
Operating weight
34
Short Teeth and Segments
930M
938M
Long Teeth and
Segments
Short Teeth and
Segments
Long Teeth and
Segments
Short Teeth and
Segments
Long Teeth and
Segments
Short Teeth and
Segments
mm
+12
+146
–103
+104
in
+0.5"
+5.7"
–4.1"
+4.1"
mm
+5
+121
–82
+89
in
+0.2"
+4.8"
–3.2"
+3.5"
mm
+11
+146
–104
+103
in
+0.4"
+5.7"
–4.1"
+4.1"
mm
+5
+121
–83
+88
in
+0.2"
+4.8"
–3.3"
+3.5"
mm
+11
+146
–105
+102
in
+0.4"
+5.7"
–4.1"
+4"
mm
+5
+121
–84
+87
in
+0.2"
+4.8"
–3.3"
+3.4"
kg
–148
–145
–121
+120
lb
–325
–318
–266
+264
kg
–142
–139
–115
+116
lb
–311
–305
–254
+255
kg
–150
–146
–121
+120
lb
–329
–322
–266
+264
kg
–143
–140
–115
+116
lb
–315
–309
–254
+255
kg
–138
–136
–112
+111
lb
–305
–298
–245
+244
kg
–132
–130
–106
+106
lb
–291
–285
–234
+233
926M, 930M, 938M Standard and Optional Equipment
Standard Equipment
Standard equipment may vary. Consult your Cat dealer for details.
POWER TRAIN
• Axle seal guards
• Auto idle shut down feature
• Cat C7.1 ACERT engine
– Power Modes (Standard and Performance)
– Power by Range (High Power in Range 4)
– Turbocharged and aftercooled
– Diesel particulate filter (Fit for Life)
• Coolant protection to –34° C (–29° F)
• Differential lock in front axle
• Dry type air cleaner
• Enclosed wet disc full hydraulic brakes
• Fuel priming pump, automatic
• Fuel water separator
• Hydraulically driven demand cooling fan
• Intelligent hydrostatic transmission
– Power train modes
– Directional Shift Aggressiveness
– Rimpull control, adjust wheel torque
– Creeper control, adjust ground speed
• Lubed for life driveshafts
• Parking brake, electric
• Wide spaced 6 fins per inch cooling package
• S·O·SSM sampling ports
• Throttle lock and maximum speed limiter
HYDRAULICS
• Automatic lift, lower and tilt kickouts
• Bucket and Fork Modes, adjustable in-cab
• Cylinder damping at kickout and end stops
• Fine Mode control in Fork Mode
• Hydraulic Response setting
• Load sensing hydraulics and steering
• Seat-mounted hydraulic joystick controls
ELECTRICAL
• Alternator, 115-amp, heavy duty
• 12V power supply in cab (2)
• Batteries, 1,000 CCA (2) 24 volt system
• Back-up alarm
• Emergency shutdown switch
• Heavy duty gear reduction starter
• Product Link PRO with subscription
• Remote jump start post
• Resettable critical function breakers
OPERATOR ENVIRONMENT
• 75 mm (3 in) retractable seat belt,
with audible alarm and indicator
• Automatic temperature control
• Cab, enclosed and pressurized
• Cup holders
• External heated mirrors with lower parabolic
• Ground level cab door release
• Gauges
– Digital hour, odometer, tachometer, ground speed and direction indicator
– Engine coolant temperature gauge
– Fuel and Diesel Exhaust Fluid level
– Hydraulic oil temperature gauge
• Hydraulic control lockout
• Interior cab lighting, door and dome
• Interior rearview mirrors (2)
• Lunch box storage
• Operator warning system indicators
• Radio ready speakers
• Rear window defrost, electric
• Seat-mounted controls, adjustable
• Sliding glass on the side windows
• Column mounted multi function control –
lights, wipers, turn signal
• Suspension seat, fabric
• Tilt and telescopic steering wheel
• Wet arm wiper/washer, front and rear
OTHER STANDARD EQUIPMENT
• Large-access enclosure doors
• Parallel lift loader linkage
• Recovery hitch with pin
• Remote mounted lubrication points
• Lockable compartments and enclosures
Optional Equipment
Optional equipment may vary. Consult your Cat dealer for details.
•
•
•
•
•
•
•
•
•
•
•
Antifreeze/coolant, extended-life
Auto lube, integrated in secondary display
Auxiliary flow, third and fourth function
Axles, differential, limited slip, rear
Beacon light, strobe
Cab, deluxe (standard in Europe):
– Automatic blower control
– Electrically adjustable heated mirrors (2)
– LED interior lighting
– Secondary display to adjust settings
Ride control adjustable speed activation
Preventative maintenance reminders
Integrated help function (26 languages)
– Sunscreen, front and rear
Camera, rearview (standard in Europe)
Cold start package:
– Ether starting aid, block heater and
additional batteries, 1,000 CCA (4 total)
•
•
•
•
•
•
•
•
•
Counterweight, (heavy and logger)
Coupler, (Fusion and ISO 23727)
Debris packages (low, medium, high)
Fenders (extended cover and full coverage)
Guards
– Power train, (lower, side, driveshaft and crankcase)
– Windshield and lights
– Cylinders, tilt and steering
– Rear radiator, heavy duty
Linkage, high lift
Lights, auxiliary, halogen or LED with
engine compartment lights
Object Detection
Radio packages:
– Radio ready with Bluetooth
– Radio, AM/FM with Bluetooth and clock
– Radio, AM/FM with CD player deluxe,
weatherband, Bluetooth and clock
• Seats:
– Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
– Premium seat – fully adjustable leather
and fabric air suspension with high backrest
and air lumbar support. Heated and
cooled bottom cushion and backrest.
• Steering:
– Dual mode and Secondary
• Tires:
– Bias ply, 17.5, 20.5-25, Skidder
– Radial, 17.5, 20.5, 23.5, 550/65, 600/65,
650/65 R25
– Flexport, 620/65, 750/65 Agriculture
• Work tools
35
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web
at www.cat.com
© 2015 Caterpillar
All rights reserved
Materials and specifications are subject to change without notice. Featured machines in photos may include
additional equipment. See your Cat dealer for available options.
CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow” and the “Power Edge”
trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may
not be used without permission.
VisionLink is a trademark of Trimble Navigation Limited, registered in the United States and in other countries.
AEHQ7475 (06-2015)