8C.1
CAST IRON METER BOXES
FOR 5/8"x3/4" METERS
Shaded area indicates change Rev. 10-15
With locking lid, angle inlet and 3/4" FIP horizontal coupling outlet
Inlet coupling
Box height
3/4"
7"
Catalog number
H-1452-AN
Mueller 110 (CTS)
3/4"
9"
H-1452-AN
INSTA-TITE (CTS)
3/4"
7"
H-1452-BN
INSTA-TITE (CTS)
3/4"
9"
H-1452-BN
Mueller 110 (IPS)
3/4"
7"
H-1452-CN
Mueller 110 (IPS)
3/4"
9"
H-1452-CN
INSTA-TITE (IPS)
3/4"
7"
H-1452-DN
INSTA-TITE (IPS)
3/4"
9"
H-1452-DN
Copper flare
3/4"
7"
H-1452-EN
Copper flare
3/4"
9"
H-1452-EN
Mueller 110 (CTS)
1"
7"
H-1452-JN
Mueller 110 (CTS)
1"
9"
H-1452-JN
3/4"
7"
H-1452-2N
Copper flare*
Copper flare*
3/4"
9"
H-1452-2N
Mueller 110 (CTS)*
3/4"
7"
H-1452-3N
Mueller 110 (CTS)*
3/4"
9"
H-1452-3N
Pack Joint (CTS)
3/4"
7"
H-1452-AN
Pack Joint (CTS)
3/4"
9"
H-1452-AN
Pack Joint (CTS)
1"
7"
H-1452-JN
Pack Joint (CTS)
1"
9"
H-1452-JN
Pack Joint (CTS)*
3/4"
7"
H-1452-3N
Pack Joint (CTS)*
3/4"
9"
H-1452-3N
(H-1452-3N shown)
8C - C.I. BOXES
Inlet size
Mueller 110 (CTS)
* Inlet connections are integral to the meter box.
Note: Meter boxes will not be sold without the inlet coupling.
Touch read hole available. Contact Mueller Customer Service Center for more information.
Note: For an inlet reduced port ball valve replace the "H1" with a "B2" when ordering. Example: H1452-3N - B2452-3N
With non-locking lid, angle inlet and 3/4" FIP horizontal coupling outlet
Inlet size
Box height
Mueller 110 (CTS)
Inlet coupling
3/4"
7"
Catalog number
H-1453-AN
Mueller 110 (CTS)
3/4"
9"
H-1453-AN
INSTA-TITE (CTS)
3/4"
7"
H-1453-BN
INSTA-TITE (CTS)
3/4"
9"
H-1453-BN
Mueller 110 (IPS)
3/4"
7"
H-1453-CN
Mueller 110 (IPS)
3/4"
9"
H-1453-CN
INSTA-TITE (IPS)
3/4"
7"
H-1453-DN
INSTA-TITE (IPS)
3/4"
9"
H-1453-DN
Copper flare
3/4"
7"
H-1453-EN
Copper flare
3/4"
9"
H-1453-EN
Copper flare*
3/4"
7"
H-1453-2N
Copper flare*
3/4"
9"
H-1453-2N
Mueller 110 (CTS)*
3/4"
7"
H-1453-3N
Mueller 110 (CTS)*
3/4"
9"
H-1453-3N
Pack Joint (CTS)
3/4"
7"
P-1453-AN
Pack Joint (CTS)
3/4"
9"
P-1453-AN
Pack Joint (CTS)*
3/4"
7"
P-1453-3N
Pack Joint (CTS)*
3/4"
9"
P-1453-3N
(P-1453-3N shown)
* Inlet connections are integral to the meter box.
Note: Meter boxes will not be sold without the inlet coupling.
Touch read hole available. Contact Mueller Customer Service Center for more information
Note: For an inlet reduced port ball valve replace the "P1" with a "P2" when ordering. Example: P1453-3N - P2453-3N
See pages 8C.5, 8C.6 and 8C.7 for tubing or pipe that can be used with MUELLER 110®, Pack Joint and INSTA-TITE® connections.
MUELLER Valves and Couplings are manufactured and tested in accordance with ANSI/AWWA C800.Components in contact with potable
water will also comply with latest requirements of the Federal Safe Drinking Water Act.
8C.2
Rev. 10-15
CAST IRON METER BOXES
FOR 5/8"x3/4" METERS
Shaded area indicates changes
With locking lid, horizontal inlet and 3/4" FIP coupling outlet
Inlet size
Box height
Mueller 110 (IPS)
Inlet coupling
3/4"
7"
Catalog number
H-1452-FN
Mueller 110 (IPS)
3/4"
9"
H-1452-FN
INSTA-TITE (CTS)
3/4"
7"
H-1452-GN
INSTA-TITE (CTS)
3/4"
9"
H-1452-GN
INSTA-TITE (IPS)
3/4"
7"
H-1452-HN
INSTA-TITE (IPS)
3/4"
9"
H-1452-HN
Mueller 110 (CTS)
1"
7"
H-1452-KN
Mueller 110 (CTS)
1"
9"
H-1452-KN
Copper flare*
3/4"
7"
H-1452-4N
Copper flare*
3/4"
9"
H-1452-4N
Mueller 110 (CTS)*
3/4"
7"
H-1452-5N
Mueller 110 (CTS)*
3/4"
9"
H-1452-5N
Pack Joint (CTS)
1"
7"
H-1452-KN
Pack Joint (CTS)
1"
9"
H-1452-KN
Pack Joint (CTS)*
3/4"
7"
H-1452-5N
Pack Joint (CTS)*
3/4"
9"
H-1452-5N
(H-1452-5N shown)
8C - C.I. BOXES
* Inlet connections are integral to the meter box.
Note: Meter boxes will not be sold without the inlet coupling.
Touch read hole available. Contact Mueller Customer Service Center for more information.
Note: For an inlet reduced port ball valve replace the "H1" with a "B2" when ordering. Example: H1452-3N - B2452-3N
With locking lid, horizontal inlet and 3/4" FIP coupling outlet
Inlet size
Box height
Mueller 110 (IPS)
Inlet coupling
3/4"
7"
Catalog number
H-1453-FN
Mueller 110 (IPS)
3/4"
9"
H-1453-FN
INSTA-TITE (CTS)
3/4"
7"
H-1453-GN
INSTA-TITE (CTS)
3/4"
9"
H-1453-GN
INSTA-TITE (IPS)
3/4"
7"
H-1453-HN
INSTA-TITE (IPS)
3/4"
9"
H-1453-HN
Mueller 110 (CTS)
1"
7"
H-1453-KN
Mueller 110 (CTS)
1"
9"
H-1453-KN
Copper flare*
3/4"
7"
H-1453-4N
Copper flare*
3/4"
9"
H-1453-4N
Mueller 110 (CTS)*
3/4"
7"
H-1453-5N
Mueller 110 (CTS)*
3/4"
9"
H-1453-5N
Pack Joint (CTS)
1"
7"
P-1453-KN
Pack Joint (CTS)
1"
9"
P-1453-KN
Pack Joint (CTS)*
3/4"
7"
P-1453-5N
Pack Joint (CTS)*
3/4"
9"
P-1453-5N
(P-1453-5N shown)
* Inlet connections are integral to the meter box.
Note: Meter boxes will not be sold without the inlet coupling.
Touch read hole available. Contact Mueller Customer Service Center for more information.
Note: For an inlet reduced port ball valve replace the "P1" with a "P2" when ordering. Example: P1453-3N - P2453-3N
See pages 8C.5, 8C.6 and 8C.7 for tubing or pipe that can be used with MUELLER 110®, Pack Joint and INSTA-TITE® connections.
MUELLER Valves and Couplings are manufactured and tested in accordance with ANSI/AWWA C800.Components in contact with potable
water will also comply with latest requirements of the Federal Safe Drinking Water Act.
8C.3
CAST IRON METER BOXES
FOR 5/8"x3/4" METERS
Shaded area indicates change Rev. 6-16
With locking lid, angle inlet, ASSE dual check with 3/4" FIP horizontal coupling outlet
Inlet size
Box height
Catalog number
Mueller 110 (CTS)
3/4"
7"
H-1454-AN
Mueller 110 (CTS)
3/4"
9"
H-1454-AN
INSTA-TITE (CTS)
3/4"
7"
H-1454-BN
INSTA-TITE (CTS)
3/4"
9"
H-1454-BN
Mueller 110 (IPS)
3/4"
7"
H-1454-CN
Mueller 110 (IPS)
3/4"
9"
H-1454-CN
INSTA-TITE (IPS)
3/4"
7"
H-1454-DN
INSTA-TITE (IPS)
3/4"
9"
H-1454-DN
Copper flare
3/4"
7"
H-1454-EN
Copper flare
3/4"
9"
H-1454-EN
1"
7"
H-1454-JN
3/4"
7"
H-1454-2N
Mueller 110 (CTS)
Copper flare*
Copper flare*
3/4"
9"
H-1454-2N
Mueller 110 (CTS)*
3/4"
7"
H-1454-3N
Mueller 110 (CTS)*
3/4"
9"
H-1454-3N
Pack Joint (CTS)
3/4"
7"
P-1454-AN
Pack Joint (CTS)
3/4"
9"
P-1454-AN
Pack Joint (CTS)
1"
7"
P-1454-JN
Pack Joint (CTS)*
3/4"
7"
P-1454-3N
Pack Joint (CTS)*
3/4"
9"
P-1454-3N
(P-1454-3N shown)
8C - C.I. BOXES
Inlet coupling
* Inlet connections are integral to the meter box.
Note: Meter boxes will not be sold without the inlet coupling.
Touch read hole available. Contact Mueller Customer Service Center for more information
Note: For an inlet reduced port ball valve replace the "P1" with a "P2" when ordering. Example: P1454-3N - P2454-3N
With non-locking lid, angle inlet, ASSE dual check with 3/4" FIP horizontal coupling outlet
Inlet coupling
Inlet size
Box height
Mueller 110 (CTS)
3/4"
7"
Catalog number
H-1455-AN
Mueller 110 (CTS)
3/4"
9"
H-1455-AN
INSTA-TITE (CTS)
3/4"
7"
H-1455-BN
INSTA-TITE (CTS)
3/4"
9"
H-1455-BN
Mueller 110 (IPS)
3/4"
7"
H-1455-CN
Mueller 110 (IPS)
3/4"
9"
H-1455-CN
INSTA-TITE (IPS)
3/4"
7"
H-1455-DN
INSTA-TITE (IPS)
3/4"
9"
H-1455-DN
Copper flare
3/4"
7"
H-1455-EN
Copper flare
3/4"
9"
H-1455-EN
Mueller 110 (CTS)
1"
7"
H-1455-JN
Mueller 110 (CTS)
1"
9"
H-1455-JN
3/4"
7"
H-1455-2N
Copper flare*
Copper flare*
3/4"
9"
H-1455-2N
Mueller 110 (CTS)*
3/4"
7"
H-1455-3N
Mueller 110 (CTS)*
3/4"
9"
H-1455-3N
Pack Joint (CTS)
3/4"
7"
P-1455-AN
Pack Joint (CTS)
3/4"
9"
P-1455-AN
Pack Joint (CTS)
1"
7"
P-1455-JN
Pack Joint (CTS)
1"
7"
P-1455-JN
Pack Joint (CTS)*
3/4"
7"
P-1455-3N
Pack Joint (CTS)*
3/4"
9"
P-1455-3N
(P-1455-3N shown)
* Inlet connections are integral to the meter box.
Note: Meter boxes will not be sold without the inlet coupling.
Touch read hole available. Contact Mueller Customer Service Center for more information.
See pages 8C.5, 8C.6 and 8C.7 for tubing or pipe that can be used with MUELLER 110® , Pack Joint and INSTA-TITE® connections.
Note: For an inlet reduced port ball valve replace the "P1" with a "P2" when ordering. Example: P1455-3N - P2455-3N
MUELLER Valves and Couplings are manufactured and tested in accordance with ANSI/AWWA C800.Components in contact with potable
water will also comply with latest requirements of the Federal Safe Drinking Water Act.
8C.4
Rev. 10-15
CAST IRON METER BOXES
FOR 5/8"x3/4" METERS
Shaded area indicates changes
With locking lid, horizontal inlet, ASSE dual check with 3/4" FIP horizontal coupling outlet
Inlet size
Box height
Mueller 110 (IPS)
Inlet coupling
3/4"
7"
Catalog number
H-1454-FN
Mueller 110 (IPS)
3/4"
9"
H-1454-FN
INSTA-TITE (CTS)
3/4"
7"
H-1454-GN
INSTA-TITE (CTS)
3/4"
9"
H-1454-GN
INSTA-TITE (IPS)
3/4"
7"
H-1454-HN
INSTA-TITE (IPS)
3/4"
9"
H-1454-HN
Mueller 110 (CTS)
1"
7"
H-1454-KN
Mueller 110 (CTS)
1"
9"
H-1454-KN
Copper flare*
3/4"
7"
H-1454-4N
Copper flare*
3/4"
9"
H-1454-4N
Mueller 110 (CTS)*
3/4"
7"
H-1454-5N
Mueller 110 (CTS)*
3/4"
9"
H-1454-5N
Pack Joint (CTS)
1"
7"
P-1454-KN
Pack Joint (CTS)
1"
9"
P-1454-KN
Pack Joint (CTS)*
3/4"
7"
P-1454-5N
Pack Joint (CTS)*
3/4"
9"
P-1454-5N
(H-1454-5N shown)
8C - C.I. BOXES
* Inlet connections are integral to the meter box.
Note: Meter boxes will not be sold without the inlet coupling.
Touch read hole available. Contact Mueller Customer Service Center for more information.
Note: For an inlet reduced port ball valve replace the "H1" with a "B2" when ordering. Example: H1454-3N - B2454-3N
With non-locking lid, horizontal inlet, ASSE dual check with 3/4" FIP horizontal coupling outlet
Inlet coupling
Inlet size
Box height
Mueller 110 (IPS)
3/4"
7"
Catalog number
H-1455-FN
Mueller 110 (IPS)
3/4"
9"
H-1455-FN
INSTA-TITE (CTS)
3/4"
7"
H-1455-GN
INSTA-TITE (CTS)
3/4"
9"
H-1455-GN
INSTA-TITE (IPS)
3/4"
7"
H-1455-HN
INSTA-TITE (IPS)
3/4"
9"
H-1455-HN
Mueller 110 (CTS)
1"
7"
H-1455-KN
Mueller 110 (CTS)
1"
9"
H-1455-KN
Copper flare*
3/4"
7"
H-1455-4N
Copper flare*
3/4"
9"
H-1455-4N
Mueller 110 (CTS)*
3/4"
7"
H-1455-5N
Mueller 110 (CTS)*
3/4"
9"
H-1455-5N
Pack Joint (CTS)
1"
7"
P-1455-KN
Pack Joint (CTS)
1"
9"
P-1455-KN
Pack Joint (CTS)*
3/4"
7"
P-1455-5N
Pack Joint (CTS)*
3/4"
9"
P-1455-5N
(H-1455-5N shown)
* Inlet connections are integral to the meter box.
Note: Meter boxes will not be sold without the inlet coupling.
Touch read hole available. Contact Mueller Customer Service Center for more information.
See pages 8C.7-8C.9 for tubing or pipe that can be used with MUELLER 110®, Pack Joint and INSTA-TITE® connections.
Note: For an inlet reduced port ball valve replace the "H1" with a "B2" when ordering. Example: H1455-3N - B2455-3N
MUELLER Valves and Couplings are manufactured and tested in accordance with ANSI/AWWA C800.Components in contact with potable
water will also comply with latest requirements of the Federal Safe Drinking Water Act.
CAST IRON "STRETCH" METER BOXES
IRON
METER
CAST
IRON "STRETCH"
"STRETCH"
FOR 5/8"x3/4"
METERS METER BOXES
BOXES
FOR 5/8"x3/4"
METERS
FOR
5/8"x3/4"
METERS
8C.555
Rev. 9-07
Rev. 9-07
Shaded area indicates change Rev. 4-14
With locking lid, horizontal inlet and 3/4" FIP coupling outlet
With locking lid, horizontal inlet and 3/4" FIP coupling outlet
Catalog
Number
Description
With
locking
lid, horizontal
inlet, and 3/4" FIP couplingInlet
outletSize
Catalog
Number
H-1461-F
Inlet
coupling
Mueller
110 (CTS)
H-1461-F
H-1461-K
®
Description
(CTS)
Mueller 110
Inlet size
®
3/4"
® (CTS)
Mueller
110
Mueller 110 (CTS)
Inlet
Size
3/4"
Box height
3/4"
1" 7"
Box Height
Box
7" Height
Catalog
number
H-1461-FN
7"
7"
H-1461-K
Mueller
110® (CTS)
Copper Flare*
3/4"
®
Copper
MuellerFlare*
1103/4"
(CTS)*
1"
3/4"
3/4"
3/4"
7"
7"H-1461-4N
7"
7"H-1461-5N
®
(CTS)*
Mueller
1103/4"
FIP
1"
FIP
Pack joint (CTS)
3/4"
3/4"
3/4"
3/4"
1"
Mueller 110 (CTS)
H-1461-4
Copper
Flare*
H-1461-4
Mueller
110 (CTS)
H-1461-5
FIP
H-1461-5
H-1461-6
H-1461-6
P-1461-K
Pack
Joint (CTS)*
Pack Joint (CTS)
1"
7"
7"
7"
7"
7"
7"
H-1461-KN
H-1461-6N
7"
7"P-1461-KN
7"
7"P-1461-5N
(H-1461-KNshown)
shown)
(H-1461-K
P-1461-K
Pack
1"
7"
P-1461-5
Pack joint
joint (CTS)
(CTS)*
3/4"
7"
(H-1461-K shown)
* Inlet connections are integral to the meter box.
joint
(CTS)*
3/4" boxes are supplied7"
Note:
Meter
boxes willare
notintegral
bePack
soldto
without
the
inlet
as standard with an ASSE double check valve.
*P-1461-5
Inlet
connections
the meter
box.coupling. Stretch
Meter
boxes
will
not
sold
without
the
inlet
coupling.
Stretch
boxes
are supplied as standard with
Note:
For
an inlet
reduced
portbeball
replace
the
"H1"
with a "B2"
when
ordering.
*Note:
Inlet
connections
are integral
tovalve
the
meter
box.
Example:
- B2461-3N
an ASSEH1461-3N
double check
valve.
8C - C.I. BOXES
Note: Meter boxes will not be sold without the inlet coupling. Stretch boxes are supplied as standard with
Touch
read
hole available.
Contact Mueller Customer Service Center for more information.
an
ASSE
double
check valve.
Touch read hole available. Contact Mueller Customer Service Center for more information.
With non-locking lid, horizontal inlet and 3/4" FIP coupling outlet
With non-locking lid, horizontal inlet and 3/4" FIP coupling outlet
Catalog Number
Description
Inlet Size
®
Catalog
Number
Description
Inlet
H-1462-F
Mueller 110 (IPS)
3/4" Size
With non-locking lid, horizontal inlet, and 3/4"
® FIP coupling outlet
H-1462-F
Mueller
3/4"
H-1462-K
Mueller 110
110® (IPS)
(CTS)
1"
Inlet coupling
H-1462-K
Mueller
110 (IPS)
H-1462-4
Mueller
110 (CTS)
H-1462-4
H-1462-5
H-1462-5
H-1462-6
Mueller
110 (CTS)
FIP
H-1462-6
P-1462-K
Copper Flare*
Pack Joint (CTS)
Inlet size
Mueller
110® (CTS)
Copper3/4"
Flare*
1"
Copper
MuellerFlare*
110® (CTS)*
3/4"
Mueller
110® (CTS)*
FIP 3/4"
3/4"
FIP
Pack joint
(CTS)
1"
P-1462-K
Pack
(CTS)
P-1462-5
Pack joint
joint
Pack
Joint (CTS)*
3/4" (CTS)*
joint
(CTS)*
*P-1462-5
Inlet connections are integral toPack
the meter
box.
Box height
1"
7"
3/4"
7"
3/4"
3/4"
7"
3/4"
3/4"
7"
7"
3/4"
1"
7"
1"
3/4"
7"
3/4"
Box Height
Box
7" Height
7"
7"
Catalog number
7"
H-1462-FN
7"
H-1462-KN
7"
7"
7"
7"
H-1462-5N
H-1462-6N
7"
7"
H-1462-4N
P-1462-KN
7"
7"
P-1462-5N
7"
(H-1462-K shown)
(H-1462-K shown)
(H-1462-KN shown)
*Note:
Inlet connections
integral
the without
meter box.
Meter
boxesare
will
not betosold
* InletMeter
connections
are integral
to the
meter the
box.inlet coupling. Stretch boxes are supplied as standard with
Note:
boxescheck
will not
be sold without the inlet coupling. Stretch boxes are supplied as standard with an ASSE double check valve.
an ASSE double
valve.
Note: Meter boxes will not be sold without the inlet coupling. Stretch boxes are supplied as standard with
Touch
read
holeavailable.
available.
ContactMueller
Mueller
Customer
Service
Center
more
information.
Touch
read
hole
Contact
Customer
Service
Center
for for
more
information.
an
ASSE
double
check valve.
Note:
anhole
inlet available.
reduced port
ball valve
replace
the "H1"
with a "B2"
when
Example: H1462-3N - B2462-3N
TouchFor
read
Contact
Mueller
Customer
Service
Center
for ordering.
more information.
See pages 14.7-14.9 for tubing or pipe that can be used with MUELLER 110®, Pack Joint and INSTA-TITE® connections.
MUELLER Valves and Couplings are manufactured and tested in accordance with ANSI/AWWA C800.Components in contact with potable
water will also comply with latest requirements of the Federal Safe Drinking Water Act.
8C.6
CAST IRONCAST
"STRETCH"
METER BOXES
IRON "STRETCH"
METER
CAST IRON BOXES
"STRETCH"
METERMETERS
BOXES
FORFOR
5/8"x3/4"
5/8"x3/4"
METERS
FOR 5/8"x3/4" METERS
Rev. 9-07
Rev. 4-14 Shaded area indicates changes
Rev. 9-07
With locking lid, angle inlet and 3/4" FIP coupling outlet
With
locking lid, angle
inlet and 3/4"
FIP coupling
Description
Inlet Size
Box Height
Catalogoutlet
Number
With locking lid,®angle inlet, and 3/4" FIP coupling outlet
Mueller 110 (CTS)
Description
Inlet
coupling
®
Mueller 110 (CTS)®
Mueller
(CTS)
Mueller 110
110 (IPS)
Copper
Flare
Mueller 110 (IPS)
Copper flare
Mueller
110® (CTS)
Copper
Flare
Mueller
110 (CTS)
Mueller 110 (IPS) ®
3/4"
InletInlet
Size
size
3/4"
3/4"
3/4"
7"
Box
Height
Box
height
7"
7"
7"
3/4"
3/4"
1"
3/4"
7"
7"
7"
7"
Mueller
110 (IPS)
Mueller
110®®
1"
1"
3/4"
1"
®
3/4"
3/4"
3/4"
3/4"
(CTS)
Mueller 110 (IPS)
Copper flare*
®
Copper
Flare*
Mueller
110 (IPS)
Mueller
110 (CTS)*
Mueller
110 (CTS)*
Pack
Joint (CTS)
Copper
Flare*
Pack Joint (CTS) ®
Pack joint
(CTS)
Mueller
110
(CTS)*
Pack Joint (CTS)*
Pack joint
joint (CTS)
(CTS)
Pack
1"
3/4"
3/4"
3/4"
1"
1"
3/4"
3/4"
3/4"
1"
3/4"
7"
7"
7"
7"
7"
7"
7"
7"
7"
7"
7"
7"
7"
7"
7"
7"
7"
7"
7"
H-1461-A
Catalog
Catalog Number
number
H-1461-AN
H-1461-C
H-1461-A
H-1461-CN
H-1461-E
H-1461-C
H-1461-EN
H-1461-J
H-1461-E
H-1461-JN
H-1461-MN
H-1461-M
H-1461-J
H-1461-2N
H-1461-2
H-1461-M
H-1461-3N
H-1461-3
P-1461-AN
H-1461-2
P-1461-JN
P-1461-A
H-1461-3
P-1461-3N
P-1461-J
P-1461-A
(H-1461-3 shown)
(H-1461-3N shown)
(H-1461-3 shown)
* Inlet connections are integral to the meter box.
Pack
joint
(CTS)*
3/4" the inlet coupling. Stretch
7" boxes are supplied
P-1461-3
Pack
joint
(CTS)
1"
7"
P-1461-J
Note:
Meter
boxes
will not be sold without
as standard with an ASSE double check valve.
Note: For an inlet reduced port ball valve replace the "H1" with a "B2" when ordering. Example: H1461-3N - B2461-3N
* Pack
Inlet connections
are integral to 3/4"
the meter box.
joint (CTS)*
7"
P-1461-3
Touch
holeboxes
available.
Cotact
Mueller
Customer
Service
Center
for more
information.
Note:read
Meter
will not
be sold
without
the inlet
coupling.
Stretch
boxes
are supplied as standard with
8C - C.I. BOXES
*anInlet
connections
are integral
ASSE
double check
valve. to the meter box.
Note:
boxes
will not Contact
be sold without
inlet coupling.
areinformation.
supplied as standard with
TouchMeter
read hole
available.
USPVHthe
Customer
Service Stretch
Center boxes
for more
an ASSE double check valve.
Touch read hole available. Contact USPVH Customer Service Center for more information.
With non-locking lid, angle inlet and 3/4" FIP horizontal coupling outlet
With
non-locking lid,Inlet
angle
3/4" FIP horizontal
coupling outlet
Description
Size inlet and
Box Height
Catalog Number
Mueller
110® (CTS)
Description
®
Mueller
(CTS)
Mueller 110
110® (IPS)
3/4"
Inlet Size
3/4"
3/4"
7"
Box Height
7"
7"
With
non-locking
and 3/4" FIP horizontal
Copper
Flare® lid, angle inlet, 3/4"
7"coupling outlet
Mueller 110 (IPS)
Mueller
110® (CTS)
Copper
Flare
Mueller
110 (CTS)
Inlet coupling
®
(IPS)
(CTS)
®
Copper
Flare*
Mueller 110 (IPS)
Mueller
110®
Mueller
110 (IPS)
Mueller
110
Copper flare
Mueller 110 (CTS)
®
Mueller
110 (CTS)*
Copper
Flare*
Mueller
110 (IPS)
Copper
Packflare*
joint
®
(CTS)
Mueller 110
(CTS)*
Pack
joint
(CTS)
Pack joint (CTS)
Mueller 110 (CTS)*
Pack Joint (CTS)
Pack
Pack
Jointjoint
(CTS)(CTS)*
Pack
joint
(CTS)
3/4"
Inlet size
1" 3/4"
3/4"
1"
1" 3/4"
3/4"
3/4"
1"
1"
7"
7"
7"
7"
3/4" 1"
3/4"
3/4"
3/4"3/4"
7"
7"
7"
7"
1"
3/4"3/4"
3/4"
1" 1"
7"
7"
7"
7"
3/4"
Pack
Joint
(CTS)* are integral to the meter
3/4"box.
* Inlet
connections
Pack joint (CTS)*
7"
Box height
7" 7"
7"
3/4"
7"
7"
7"
7"
7"
7"
7"
7"
7"
7"
H-1462-A
Catalog Number
H-1462-C
H-1462-A
H-1462-E
H-1462-C
H-1462-J
H-1462-E
H-1462-AN
Catalog number
H-1462-M
H-1462-CN
H-1462-J
H-1462-EN
H-1462-2
H-1462-M
H-1462-JN
H-1462-3
H-1462-2
H-1462-MN
H-1462-2N
P-1462-A
H-1462-3
(P-1462-3 shown)
P-1462-J
P-1462-A
P-1462-AN
P-1462-3
P-1462-JN
P-1462-J
(P-1462-3N shown)
H-1462-3N
(P-1462-3 shown)
P-1462-3N
P-1462-3
Note: Meter boxes will not be sold without the inlet coupling. Stretch boxes are supplied as standard with
* Inlet
connections
integral
to the
meter
box.box.
*anInlet
connections
are
integral
to the
meter
ASSE
double are
check
valve.
Note: Meter boxes will not be sold without the inlet coupling. Stretch boxes are supplied as standard with an ASSE double check valve.
Note:
Meter
boxes
will not Contact
be sold without
the
inlet coupling.
areinformation
supplied as standard with
Touch
read
hole
available.
USPVH
Customer
Service Stretch
Center boxes
for more
Note: For an inlet reduced port ball valve replace the "P1" with a "P2" when ordering. Example: P1462-3N - P2462-3N
an ASSE double check valve.
®
See
pages
8C.7-8C.9
for tubing
or pipeUSPVH
that canCustomer
be used with
MUELLER
Packinformation
Joint and INSTA-TITE® connections.
Touch
read
hole available.
Contact
Service
Center110
for ,more
Touch read hole available. Cotact Mueller Customer Service Center for more information.
MUELLER Valves and Couplings are manufactured and tested in accordance with ANSI/AWWA C800.
MUELLER
and Couplings
areand
manufactured
andwith
tested
in accordance
with inANSI/AWWA
C800.
MUELLER
ValvesValves
and Couplings
are manufactured
tested in accordance
ANSI/AWWA
C800.Components
contact with potable
water will also comply with latest requirements of the Federal Safe Drinking Water Act.
8C.7
CAST IRON METER BOX - RETROFIT
CHECK VALVES, EQUIPMENT AND TOOLS
Shaded area indicates change Rev. 4-14
Dual check for MUELLER Cast iron Meter Box
Inlet: Flange bolts to box base
Outlet:F.I.P.
Retrofits to existing MUELLER Boxes
Copper flare connection optional equipment
H-14290N
H-14290
3/4
5/8x3/4
3/4
Brass Hammer
Combination key and
wrench
Solid brass head with
10" wooden handle.
Weight 2-3/4 lb.
CATALOG NUMBER: H-18025
Copper flare nut
CATALOG NUMBER: H-15430
1/2"
3/4"
1"
1-1/4" 1-1/2" 2"
One end of tool is used as a
key to un-lock cast iron meter
box lids and can also be used
to lift the lid. The other end is
used as a wrench to open and
close the meter box inlet
valve. Not furnished with
meter boxes.
507791
Solid copper disc
Brass cap
Used with regular
copper flare nut to shut off line.
Fits on copper
flare spud to cap off line.
CATALOG NUMBER: H-15535
CATALOG NUMBER: H-15540N
1/2"
3/4"
1"
1-1/4" 1-1/2" 2"
3/4"
1"
Flaring tool
Drilled flaring tool
Reamer
Used to make 45° flare on
type"K" copper tubing.
Used to make 45° flare on type "K" copper
tubing without shutting off water-drilled to
exhaust water at right angle to tubing.
Used to ream the inside of type
"K" copper tubing to remove
burrs prior to flaring.
CATALOG NUMBER: H-18000
CATALOG NUMBER: H-18005
1/2" 5/8" 3/4" 1"
3/4"
1-1/4" 1-1/2"2"
1"
CATALOG NUMBER: H-18010
Note: When using any striking tool, safety eye protection must be worn. Inspect hammer and tools for any damage after each use and
repair or replace if mushrooming or chipping is evident.
MUELLER Valves and Couplings are manufactured and tested in accordance with ANSI/AWWA C800.Components in contact with potable
water will also comply with latest requirements of the Federal Safe Drinking Water Act.
8C - C.I. BOXES
Catalog size
Meter size
Thread size
8C.8
Rev. 1-15
MUELLER 110® COMPRESSION CONNECTION
& PACK JOINT INFORMATION AND KITS
Shaded area indicates changes
Tubing, pipe, and liners used with Mueller 110 compression
Nominal size
of connection
3/4" CTS
1" CTS
3/4" IPS
Material
Tubing or pipe O.D.
range (in.)
Tubing or pipe wall thickness
range (in.)
Tubing or pipe I.D.
range (in.)
Liner part
number
Type "K" copper
0.872 - 0.878
0.061 - 0.069
-
-
Polyethylene PE
0.871 - 0.879
0.097 - 0.107
0.657 - 0.685
504281
Type "K" copper
1.127 - 1.129
0.061 - 0.069
-
-
Polyethylene PE
1.120 - 1.130
0.125 - 0.137
0.846 - 0.880
504385
Polyethylene PE
1.045 - 1.110
0.118 - 0.138
0.809 - 0.834
505141
3/4" Sch, 40 PVC
1.046 - 1.054
0.113 - 0.134
0.788 - 0.828
509759
3/4" Sch, 80 PVC
1.329 - 1.399
1.150 - 0.170
0.698 - 0.746
509760
Type "K" copper tubing per ASTM B88
CTS polyethylene (PE) per ASTM D-2737 SDR-9
IPS polyethylene (PE) per ASTM D-2239 PE SIDR-7
Polyvinylchloride (PVC) per ASTM D1785
Liner
Mueller 110 compression connection replacement parts
Size
8C - C.I. BOXES
Gasket part number †
Connection nut
3/4" CTS
581949
507831
1" CTS
581951
507835
3/4" IPS
89599
508826
Gasket
Assembly
† Gasket and gripper band assembly
Nut
Adapter Nut for pre-1976 style Mueller 110 Compression Connection for CTS tubing
Kit includes one standard Gasket (same used with current style 110 connections) and a special Nut that adapts to the
older style connection threads on the fittings. It is installed in the same way as the current style connection (Gasket
conductor spring should be toward fitting body).
Size
3/4" CTS
1" CTS
Connection kit
682552
682551
Pack Joint connection kits (includes nut, gasket, and washer) †
Nominal size of
connection
Tubing or pipe
O.D. range (in.)
Tubing or pipe wall
thickness range (in.)
Tubing or pipe I.D. range (in.)
Part number
3/4" CTS or CTS PE
0.871 - 0.879
0.097 - 0.107
0.657 - 0.685
681921
1" CTS or CTS PE
1.120 - 1.130
0.125 - 0.137
0.846 - 0.880
681922
† 3/4" & 1" size kits (CTS only) will interchange with valves or fittings using Mueller 110 Compression Connections (CTS).
Pack Joint Kit
Tubing, pipe and liners for Mueller Pack Join connection (not required for Type "K" copper pipe)
Nominal size of
connection
Tubing or pipe
O.D. range (in.)
Tubing or pipe wall
thickness range (in.)
Tubing or pipe I.D. range (in.)
Length of liner (in.)
Part number
3/4" CTS or CTS PE
0.871 - 0.879
0.097 - 0.107
0.657 - 0.685
1.625
J-2805
1" CTS or CTS PE
1.120 - 1.130
0.125 - 0.137
0.846 - 0.880
2.125
J-2805
Liner
MUELLER Valves and Couplings are manufactured and tested in accordance with ANSI/AWWA C800.Components in contact with potable
water will also comply with latest requirements of the Federal Safe Drinking Water Act.
8C.9
MUELLER INSTA-TITE®
CONNECTION INFORMATION
Shaded area indicates change Rev. 4-01
Polyethylene PE tubing and pipe used with Mueller INSTA-TITE connections
Nominal size
of connection
Material
Tubing or pipe O.D. range (in.)
Tubing or pipe wall thickness range (in.)
Tubing or pipe I.D. range (in.)
3/4" CTS
Polyethylene PE
0.871 - 0.879
0.097 - 0.107
0.657 - 0.685
3/4" IPS
Polyethylene PE
1.045 - 1.110
0.118 - 0.138
0.809 - 0.834
CTS polyethylene (PE) per ASTM D-2737 PE2306,3306, SDR-9
IPS polyethylene (PE) per ASTM D-2239 PE SIDR-7
Mueller INSTA-TITE connection replacement parts
Size
Gripping ring part number †
O-ring part number
3/4" CTS (red gripper)
506325
506324
3/4" IPS (white gripper)
505885
505883
Gripper ring
O-ring
Optional tools for use with corporation stops having MUELLER INSTA-TITE Connection outlets
To insure proper installation, the end of the
pipe or tubing must be properly beveled
before it is inserted into the MUELLER
INSTA-TITE Connection. MUELLER CO.
offers a special beveling tool for both CTS
PE tubing and IPS PE pipe.
PART NUMBER: H-18015 for 3/4" and 1" CTS tubing
PART NUMBER: H-18017 for 3/4" and 1" IPS pipe
Pipe removal tool
Pipe or tubing may be
removed from the
MUELLER INSTA-TITE
Connection using special
removal tools. Use one tool
for 3/4" size connection and
two tools for 1" size.
PART NUMBER: 506336
8C - C.I. BOXES
† Gripper ring assembly.
8C.10
Rev. 4-99
CAST IRON METER BOXES
Shaded area indicates changes
8C - C.I. BOXES
www.muellercompany.com
[email protected]