G-kit Auto irrigation
___________________________________________________________________
Installation manual
Versie: NL2013 – 12
G-kit Auto Irrigation system:
Specifications:
Content Irrigation systems for G-kit 600 Bonanza and G-kit 400 Wing:
-2 x aluminium profile 80cm
-2 x aluminium profile 55cm
-4 x aluminium profile 16cm
-4 x plastic feet
-4 x G-tools patented 3-way insert connectors
-1 x plastic water tank 15 liter
-1 x Brennenstuhl digital timer
-1 x Micro Jet submersible pump 450 liter/hour
-1 x Hose clamp
-1 x 100cm PE hose 16mm with 4 x octopus connectors and
end cap,
-4 x octopus, 4 drippers
-1 x 2-way valve with 35cm garden hose (connection to pump) and 100 cm garden
hose (exit water).
-1 x drainage tray (Danish tray) 110 x 63cm
Content for G-kit 600 Wing :
-4 x aluminium profile 51cm
-3 x aluminium profile 55 cm
-6 x aluminium profile 35 cm
-6 x plastic feet
-4 x G-tools patented 3-way insert connectors
-2 x G-tools patented 4-way insert connectors
-1 x plastic water tank 65 liter
-1 x Brennenstuhl digital timer
-1 x HX 2500 liter/hour pump
-1 x 100cm PE hose 16mm with 4 x octopus connectors and
end cap.
-6 x octopus, 4 drippers
-1 x 100 cm tricoflex 1” drain water hose with clamp
-1 x 2-way valve with 35cm garden hose (connection to pump) and 100 cm garden
hose (exit water).
-1 x drainage tray (Danish tray) 144 x 63cm
Content for G-kit 1200 Wing :
-4 x aluminium profile 60cm
-3 x aluminium profile 86,5cm
-6 x aluminium profile 35cm
-6 x plastic feet
-4 x G-tools patented 3-way insert connectors
-2 x G-tools patented 4-way insert connectors
-1 x plastic water tank 65 liter
-1 x Brennenstuhl digital timer
-1 x HX 2500 liter/hour pump
-1 x 125cm PE hose 16mm with 4 x octopus connectors,
and end cap
-10 x octopus, 4 drippers
-1 x 100 cm tricoflex 1” drain water hose
-1 x 2-way valve with 35cm garden hose (connection to pump) and 100 cm garden
hose (exit water).
-1 x drainage tray (Danish tray) 170 x 100cm
Content extension module (1200 Bonanza):
-2 x aluminium profile 80cm
-2 x aluminium profile 55cm
-4 x aluminium profile 15cm
-4 x plastic feet
-4 x G-tools patented 3-way insert connectors
-1 x plastic water tank 15 liter
-1 x 100cm PE hose 16mm with 4 x octopus connector,
end cap and connector piece.
-4 x octopus, 4 drippers
Installation-instructions 600 Bonanza, 400 Wing
1.
Mount the grow table using the aluminium profiles, the 3-way insert connectors and
the plastick feet.The 15cm profiles are the legs of the table.(see picture 1)
picture 1
2.
3.
4.
5.
6.
7.
8.
9.
Place the water tank on the right hand side inside the cabinet..
Place the pump on the right side in the water tank.
Place the drainage tray, 110 x 63cm on the table with the drainage hole over the water
tank.
Connect the 2-way valve to the pump using the garden hose (35cm) and supplied
hose clamp (shorten the garden hose if necessary).
Connect the black PE hose to the 2-way valve.
Click the 4 octopusses on the connectors on the PE hose.
Set the time and the desired watering moments in the digital timer.
Plug the pump in the timer and the timer in a socket. (contact “continuous” on a Gtools switch box).
Installation-instructions extension module:
1.
2.
3.
4.
5.
Mount the grow table using the aluminium profiles, the 3-way insert connectors and
the plastick feet.The 15cm profiles are the legs of the table.(see picture 1, tables for
600 Wing and 1200 Wing have 6 legs)
Place the water tank on the right side inside the cabinet..
Place the drainage tray, 110 x 63cm on the table with the drainage hole over the water
tank
Connect the 2 PE hoses using the supplied connector piece. (cut of the end cap on
the PE hose with the elbow connector).
Click the 4 octopusses on the connectors on the PE hose.
Installation-instructions 600 Wing / 1200 Wing
1. Mount the grow table using the aluminium profiles, the 3-way and 4-way insert connectors
and the plastic feet. The 35cm profiles are the legs of the table.(see picture 2 and 3)
picture 2
2.
3.
4.
5.
6.
7.
8.
picture 3
Place the water tank on the right hand front side inside the cabinet.
Connect the tricoflex 1” drain water hose to the lead-through in the Danish tray using
the clamp. The table should be placed over the water tank in such a matter that it can
still be filled. The drain water hose should run back in to the water tank.
Connect the 2-way valve to the pump using the garden hose (35cm) and supplied
hose clamp (shorten the garden hose if necessary).
Connect the black PE hose to the 2-way valve.
Click the octopusses on the connectors on the PE hose.
Set the time and the desired watering moments in the digital timer.
Plug the pump in the timer and the timer in a socket. (contact “continuous” on a Gtools switch box).