APPLIANCE | Detergent and rinse-aid dispenser |
CODE 100418
Description:
The dispenser is a device which releases the detergent and rinse aid in the dishwasher. The
operation concerning dispensing of the detergent and the rinse aid is based on a system of
levers operated by a single thermoactuator. When the thermoactuator is energized the first time,
it pushes the control lever which rotates the latch of the detergent lid and opens it. When
energized the second time, the thermoactuator pushes again on the control lever, lifts the valve
andopens the outlet for the rinse aid. The system automatically resets itself when the lid is
closed. Types of detergent that can be used are those available on the market: liquid, powder
and in tablets form. The lid gasket guarantees that the detergent is notwashed out during the prewash cycle. The dispenser is equipped with rinse aid reserve level sensors: optical level glass
and electromagnetic (optional). The adjustment to dispense rinse aid can be manual or
automatic and the rinse aid filling hole can be closed by a cap or by a lid.
Part number:
Part name:
100418
Detergent and rinse-aid dispenser
General characteristics:
silent
no electromagnetic disturbances
low energy consumption
large operating force
operates 110/240 V
Approvals:
Technical data:
Power supply time
Max ambient temperature
Voltage
Terminals
Detergent cup capacity
Rinse-aid dispensing
Rinse-aid chamber
capacity
Indication of the rinse
aid level
Dimension inner door
panel cut out
Reference standards
30/60 sec
70°C
12-24 V a.c./d.c.;
110-240 V a.c.
6,3x0,8 mm
pre-wash: max 8 ml- wash:
from 15 to 40 ml
Manual: 4 positions to
dispense rinse aid are
possible
120 cc (filling it up to
"MAX" indicated in the
rinse aid fill chamber)
visual/reed (approx 40 ml
rinse aid left)
lenght: 194 mm -width: 68
mm - radius: R= 7 mm
EN 60730-1, EN 60730-2-14