D-WDR/3D DNR DOME CAMERA
700TVL
D-WDR/3D DNR
DOME CAMERA
USER’S MAN
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Sony 1/3” 960H CCD II
High Resolution 700TV Lines
D-WDR (Wide Dynamic Range)
3D DNR (Digital Noise Reduction)
Smart IR Function
LSC(Lens Shading Compensation)
DEFOG
Day & Night (ICR-Optional)
Intelligebt Motion Detection
Back Ligiht Compensation
PELCO-D / RS485(Option)
Privacy Mask (Polygonal, 8 Colors)
O.S.D menu function
Heater & Blower Option
35pcs IR LED Vandal Dome Camera or
Non-IR LED Vandal Dome Camera
■ Flush or Surface Mounting Type
■ True 3-Axis Easy Ball Type Gimbal Bracket built-in
■ IP68 rate Waterproof Design
9-009-1312
1. Features
D-WDR(Wide Dynamic Range)
Delivers a powerful Wide Dynamic Range to the camera to provide D-WDR captures
the images at all light levels by correcting GAMMA CURVE. If you use an ordinary
camera in a scene with an intensive backlight, the object will be displayed dark on
the monitor affected by the backlight. To solve this problem, you can use the D-WDR
function to improve the dark part without saturation from bright part.
You can adjust SET LEVEL to get clearer images.
700 TVL ULTRA HIGH RESOLUTION
The horizontal resolution of 700 TV Lines with 960H CCD. It gives a vivid image
output with super high horizontal resolution using our own De-Mosaic Interpolation
algorithm and a specialised built-in sharpness filter.
3D DNR(Digital Noise Reduction)
Achieves excellent 3D-DNR (3 Dimensional-Digital Noise Reduction)
function very excellently by using upgraded 3D filtering and enables to keep this
function automatically while operating the camera to provide the clear and superior
images in very low light luminance. The SAMRT 3D-DNR will be work automatically if
There is any movement or motion. Also, this can be focus on the object in reduce the
“Ghost Effect” caused by moving object to it self.
Smart IR Function
LSC ( Lens Shading Compensation)
DEFOG
The Camera is able to recognize the concerntration of fog in the image, and automatically
defog, correct image of the bad weather such as fog, rain, mist, fumes, etc to make it clear
Sens-Up(x1024)
Achieves high quality pictures by supporting a long exposure time - more than
1/50second - and enables recognition of the shape and color of a suspended
object under no light conditions
POLYGONAL PRIVACY MASKING(Polygonal, 8colors)
Ensures privacy protection for private and specific areas on the video signal
output using a polygonal masking function. It allows the size and position of the
masking areas to be controlled very easily, and there are 8 mask areas which are
user programmable - color, brightness and mosaic.
HLC
Enables the recognition of a visible car license plate by blocking unwanted light
sources.
HIGH SENSITIVITY TRUE DAY&NIGHT
The Day & Night function delivers high quality color rendition and converts
automatically into monochrome as luminance levels drop.
2. Components
Vandal Dome Camera(Surface Mount Type)
SCREW
L-WRENCH
IR LED Vandal Dome
Non-IR LED Vandal Dome
SUPER
WDR/3D DNR
DOME CAMERA
USER’S MANUAL
70.0
Mounting Template
Surface Mount
109.0
SUPER WDR 3D DNR
Second Video & External OSD Control Cable
Sony 1/3” Color Vertical Double Density CCD
Sony 1/3” SuperHAD II CCD
960H CCD (700TV Lines)
High Resolution 600TV Lines
High Resolution 700TV Lines(960H)
WDR(Wide Dynamic Range)
3D DNR(Digital Noise Reduction)
Sens-Up Function(x512)
Eclipse Function
RS485 ( PELCO-D) Optional
UTP Interface Optional
■ Heater & Blower Option
■ 35pcs IR LED Vandal Dome Camera or
Non-IR LED Vandal Dome Camera
■ Flush or Surface Mounting Type
■ True 3-Axis Easy Ball Type Gimbal Bracket built-in
■ IP67 rate Waterproof Design
■
■
■
■
■
■
■
■
Manual Mounting Template
SIDE CAP
Vandal Dome Camera(Flush Mount Type)
SCREW
L-WRENCH
IR LED Vandal Dome
Non-IR LED Vandal Dome
SUPER
WDR/3D DNR
DOME CAMERA
USER’S MANUAL
70.0
Mounting Template
Surface Mount
109.0
SUPER WDR 3D DNR
Second Video & External OSD Control Cable
Sony 1/3” Color Vertical Double Density CCD
Sony 1/3” SuperHAD II CCD
960H CCD (700TV Lines)
High Resolution 600TV Lines
High Resolution 700TV Lines(960H)
WDR(Wide Dynamic Range)
3D DNR(Digital Noise Reduction)
Sens-Up Function(x512)
■ Eclipse Function
■ RS485 ( PELCO-D) Optional
■ UTP Interface Optional
■ Heater & Blower Option
■ 35pcs IR LED Vandal Dome Camera or
Non-IR LED Vandal Dome Camera
■ Flush or Surface Mounting Type
■ True 3-Axis Easy Ball Type Gimbal Bracket built-in
■ IP67 rate Waterproof Design
■
■
■
■
■
Manual Mounting Template
3. Names and Functions of Parts
10 POWER
9 Plastic Anchors
11 BNC
12 RS-485(Optional)
13 3/4” Cap (2EA)
14 Surface Mounting Screws
M4 x 30
8 Surface Mount
15
Service Video
16
OSD Board
17 Control Board
7 Flush Mount Base
6 Bracket
5 Gimbal
18 Heater & Blower Board
(Optional)
4 LEDs
19 Assembly Screw(Surface Mount)
M4 X 10 (4EA)
3 Lens
20 Safety Cable
2 Dome Cover
1 Bubble
21 Assembly Torx Screw
M4 X 9(3EA)
4. Installation & Connection
Surface Mount Installation
1
STEP :
1. Mount the surface mount
plate to a sturdy surface or
wall with the installation
template (mouting screws
M4 x 30).
2. Please check if the symbol
in the surface mount ring and
the square hole ( ) in the
flush mount ring meet in a line
when it is locked.
2
3. Screw with four screws
(M4 x 10) from flush mount
ring to be mounted with the
surface mount.
3
4. Adjust the lens focus and zoom
of camera to monitor the objective.
1
2
3
Surface Mount Ring (Guide)
Flush Mount Ring Square Hole
Dome Cover Ring (Symbol)
5. Fit three screws(M4 x 9) from dome
cover ring to the flush mount ring
and fix it by (3) screws. When you fit
the dome cover ring please fit the
symbols in the line.
4. Adjust the lens focus and zoom of camera to monitor the objective.
5. Fit three screws(M4 x 9) from dome cover ring to the flush mount ring
and fix it by (3) screws. When you fit the dome cover ring please fit the
symbols in the line.
Flush Mount
Adjusting the 3-Axis Gimbal
Adjusting the Varifocal DC Auto Iris Lens
ZOOM
FOCUS
Heater / Blower Specfications
Power Supply
Power Consumption
Heater
Blower
Only AC 24V
430mA (Heater) / 40mA(Blower)
On : 5℃
Off : 7℃
Continuous 24 Hour Operation
Camera O.S.D Setup Controls
LEFT
DOWN
ENTER
UP
RIGHT
DC Power Connecting
Power
(Adaptor Plug)
(Option)
Adaptor
Video Cable
RS485 -(White)
RS485 +(Orange)
RS485 +
RS485 Monitor
DVR
PORT2 PORT1
TX RX TX RX
_ + _ + _ + _ +
AC Power Connecting
+
Power
Adaptor
Video Cable
(Option)
RS485 -(White)
RS485 +(Orange)
RS485 +
RS485 Monitor
DVR
PORT2 PORT1
TX RX TX RX
_ + _ + _ + _ +
5. Setup Menu Flow
EXPOSURE
LENS
AGC
SENSE-UP
BACK LIGHT
3D-DNR
RETURN
DC, MANUAL
OFF,LOW,MID,HIGH
AUTO, OFF, X2, X4, X8, X16, X32, X64,
X128, X256, X512, X1024
OFF
BLC - BLC LEVEL<OFF, LOW, MID, HIGH>
HLC
D-WDR-SET LEVEL<0~20>
OFF, LOW, MID, HIGH, AUTO
WHITE BALANCE
WB MODE
R-Y GAIN
B-Y GAIN
RETURN
ATW, MANUAL, PUSH
DAY&NIGHT
D&N MODE
BURST
C_SUP
S_SUP
SMART IR
RETURN
AUTO, COLOR, B&W, EXT, EXT2
ON, OFF
<0 ~ 100>
<0 ~ 100>
ON, OFF
IMAGE ADJUST
MIRROR
SHARPNESS
GAMMA
LSC
DEFOG
MONITOR
RETURN
OFF, MIRROR
<0~30>
0.45, 0.55, 0.65, USER<0.2 ~ 1.0>
OFF, ON <0 ~ 30>
OFF, MANUAL, AUTO
CRT, LCD
MOTION
MOTION
AREA
SENSITIVITY
DISPLAY
HOLD TIME
ALARM OUTPUT
RETURN
OFF, ON
AREA1 ~ AREA4
<1 ~ 30>
OFF, MESSAGE, TRACE
<0~15>
OFF, ON
PRIVACY
MASK1
MASK8
OFF
ON
OFF
ON
RETURN
SPECIAL
LANGUAGE
OSD COLOR
OSD TRANS
TITLE
COMMUNICATION
DPC
FACTORY SET
RETURN
EXIT
SAVE&EXIT
EXIT
RETURN
DOT SEL
DOT XY
MOVE XY
COLOR SET<1~8>
DOT SEL
DOT XY
MOVE XY
COLOR SET<1~8>
11 Language
COLOR1~COLOR8
0~15
OFF
ON
ID<0 ~ 255>
BAUD RATE<2400, 4800, 9600>
PROTOCOL<PELCO-D>
OFF, AUTO
NO, YES
6. Special Features
1. D-WDR(Wide Dynamic Range)
D-WDR captures the images at all light levels by correcting GAMMA CURVE.
If you use an ordinary camera in a scene with an intensive backlight,
the object will be displayed dark on the monitor affected by the backlight.
To solve this problem, you can use the D-WDR function to improve the dark
part without saturation from bright part.
You can adjust SET LEVEL to get clearer images.
EXPOSURE
LENS
AGC
SENS-UP
BACK LIGHT
3D-DNR
RETURN
DC
MID
AUTO
D-WDR
AUTO
D-WDR
SET LEVEL
RETURN
003
2. HLC
This function is to mask the bright color.
You can select 4 mask areas and DAY&NIGHT and adjust HLC level.
EXPOSURE
LENS
AGC
SENS-UP
BACK LIGHT
3D-DNR
RETURN
DC
MID
AUTO
HLC
AUTO
HBLC
MODE
HLC LEVEL
MASK1
MASK2
MASK3
MASK4
RETURN
HLC
MANUAL
ALL DAY
003
ON
ON
ON
ON
3. 3D DNR(Digital Noise Reduction)
Select 3D DNR ON or OFF.
3D-DNR function reduce the background noise in a low luminance
environment. Upgraded 3D filtering ensures even more clear image.
[DNR Level High : Picture image is more clear but Ghost is more increased.
DNR Level Low : Picture image is not clear but less Ghost.]
MAIN MENU
EXPOSURE
WHITE BALANCE
DAY & NIGHT
IMAGE ADJUST
MOTION
PRIVACY
SPECIAL
EXIT
EXPOSURE
LENS
AGC
SENS-UP
BACK LIGHT
3D-DNR
RETURN
DC
MID
AUTO
D-WDR
AUTO
4. SMART MOTION
With learning capability, it memorizes the previous screen on the
movement of the subject approximately in 3 to 5 seconds. When
there is a change, the alarm function goes off.
MAIN MENU
EXPOSURE
WHITE BALANCE
DAY & NIGHT
IMAGE ADJUST
MOTION
PRIVACY
SPECIAL
EXIT
MOTION
MOTION
AREA
SENSITIVITY
DISPLAY
HOLD TIME
ALARM OUTPUT
RETURN
ON
007
TRACE
003
OFF
7. Dimensions
Surface Mount
56.7
52.0
113.0
108.0
Flush Mount
115.0
143.2
PF 3/4”
146
109.0
6
73.0
70.0
14
32.0
unit : mm
8. SPECIFICATIONS
TV System
Sensor
Total Pixels
Effective Pixels
Synchronization
Scanning System
Horizontal Resolution
Min. Illumination Sens-Up Off
Sens-Up On
Video Output
γ Correction
Monitor
S/N
O.S.D
Electrical Shutter
Privacy Masking
Day & Night
Motion Detection
Sens-Up(Low Shutter)
Language
White Balance
D-WDR
Mirror
3D-DNR
LSC
DEFOG
Smart IR
Day & Night System
IR LED
Night View Distance
Lens
Lens(optional)
Operating Temperature/Humidity
Storage Temperature/Humidity
Power(Max.)
DC Type
DC/AC Type
Use to Heater&Blower
NTSC
PAL
Sony 1/3” 960H CCD II
(H)1020 x (V)508
(H)1020 x (V)596
(H)976 x (V)494
(H)976 x (V)582
H/V 15.734/59.94Hz
H/V 15.625/50Hz
2:1 Interlace
700 TV Lines
0.12 Lux(15IRE), 0.2Lux(30IRE), 0.4Lux(50IRE) F1.2
0.0002Lux(15IRE), 0.0005Lux(30IRE), 0.0008Lux(50IRE) F1.2
1.0Vp-p/75ohm Video 0.71Vp-p
0.45, 0.55, 0.65, USER
CRT, LCD
More than 52dB (AGC off)
LENS, AGC, SENS-UP, BACK LIGHT(BLC, HLC, D-WDR),
3D-DNR, WHITE BALANCE, DAY & NIGHT
MIRROR, SHARPNESS, GAMMA, MONITOR, LSC, DEFOG
MOTION, PRIVACY (MASK1 ~MASK8), LANGUAGE
OSD COLOR, OSD TRANS, COMMUNICATION, DPC
1/60~1/100,000
1/50~1/100,000
8 Windows(Polygonal, 8 Colors)
AUTO, COLOR, BW, EXT, EXT2
ON / OFF
AUTO, OFF~x1024
11 Language
ATW / MANUAL / PUSH
ON / OFF (WDR LEVEL)
ON / OFF
OFF, LOW, MID, HIGH, AUTO
ON / OFF
OFF, MANUAL, AUTO
ON / OFF
ICR (Optional)
IR LED Type
Non IR LED Type
35 units
Outdoor 25m
2.8~12mm DC Iris Varifocal Lens
2.8~12mm Varifocal Lens
-20 ~60 / 30% ~80%
-30 ~60 / 20% ~90%
DC 12V 500mA
DC 12V 120mA
DC 12V 550mA, AC 24V 250mA
DC 12V 200mA, AC 24V 80mA
AC 24V 670mA
AC 24V 510mA
[Recommended-Voltage : +/- 20%, Current:
Adapter with rated power of 2 times(than real using current]
Design and specifications are subject to change without notice
PRODUCT WARRANTY CARD
1) ITEM # :
2) S/N # :
3) INSTALLATION CONDITION
- Indoor
/ Outdoor
- Power supply SPECIFICATION :
DC12V
/ AC24V
CURRENT __________ mA
4) TROUBLESHOOTING
- No picture
- Bad image
- No power
- Water damage
- LED ON
/ OFF
- ETC. :
* Please keep this warranty card with the manual.
* Please fill out this warranty card and send us this warranty card
with the faulty units together.
Following cases can be charged even within the warrany period.
a. When defects are caused by user’s carelessness.
b. When improper or unauthorized repairs are done or when the inside is
modified or damaged.
c. Defects caused by natural disaster or power problem.
d. When the warranty card is not filled out or corrected unconfirmed.