It gives us immense pleasure to inform you that Rajiv Gandhi Proudyogiki Vishwavidyalaya (RGPV)
Madhya Pradesh, Bhopal has implemented the Choice Based Credit System (CBCS) Scheme for all its
undergraduate programs in Engineering, Pharmacy and Architecture from this session (2015) onwards.
CBCS has also incorporated some of the avant-garde reforms in the conduction of practical
examinations. It defines practical-component assessment under two heads - the first one is an institute-based
continuous internal assessment based on in-situ practical conduction, lab works, and activities followed by vivavoce at the end of each lab slot. This will carry 80 percent of total weightage. The other is a ‘Unified Online
Practical Examination’ that carries assessment on the basis of an Online Multiple-Choice Questions Based
Examination to be organized de-centrally at the Institute level but to be controlled and monitored centrally by
the University. This component will comprise of 20 percent of the total weightage.
Salient features of ‘Unified Online Practical Examination’ are as follows:
1.
This examination will be online and it will be a multiple choice questions based
examination for the list of practicals as mentioned in Annexure A.
2.
The duration of examination will be 45 Minutes and it will carry 40 multiple choice
questions based on aspects as mentioned in Annexure B.
3.
University will conduct this examination on the same date and simultaneously at all the
centres all across the state.
4.
In the first semester scheme, every course carries a total of FOUR SUBJECTS with
practical components hence this examination will carry 10 questions per subject thus a
total of 40 multiple choice questions divided over four sections for four distinct subjects.
(division of sections as described in Annexure C)
5.
Examination will be conducted branch-wise and the questions will be derived
respectively from pool of subjects (as listed in annexure D) which have well-defined
practical components in the semester scheme of a particular branch.
1
ANNEXURE ‘A’
LIST OF PRACTICALS FOR COURSES IN FIRST SEMESTER
CE110 Engineering Mechanics
1.
2.
3.
4.
5.
6.
7.
8.
To verify the law of Triangle of forces and Lami’s theorem.
To verify the law of parallelogram of forces.
To verify law of polygon of forces
To determine the support reactions of a given truss and verify it analytically.
To determine support reaction of a Simply Supported Beam and verify it analytically using parallel beam
apparatus.
To determine the moment of inertia of fly wheel by falling weight method.
To verify the law of moments by rotating disc apparatus.
To verify the law of moments using a bell crank lever
ME111 Engineering Graphics
Students are expected to make drawings covering:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Scales
Lettering, Lines and Dimensioning
Nomography
Projection of Points
Projection of Lines
Projections of Planes and Laminae
Projections of Solids
Isometric Projections
Introductory CAD command exercises
2-D CAD Modelling
HU110 English
1.
2.
3.
4.
5.
6.
Phonetics- Symbols and pronunciation
Listening Skills
Repetition Exercises (Word Pronunciation, Sentence Pronunciation).
Substitution / Transformation Exercises (Sentence Practice, Grammar Practice).
Reflection on the organization of sentence components (Word Order).
The use of vocabulary and grammar in fill-in-the-blanks exercises, which require students to analyze a
sentence in its entirety in order to place the correct word (The Right Word, Fill-in-the-Blanks). Matching
a word with its synonym, antonym or a related image (Word association, picture / Word Association).
7. Oral Presentation
8. Debate
9. Sentence Completion
10. Extempore and Just a Minute (JAM) session.
PH110 Physics
1.
2.
3.
4.
5.
6.
7.
8.
To determine the wavelength of He-Ne Laser using diffraction grating (250 & 15,000 LPI).
To measure the Acceptance Angle & Numerical Aperture of an optical fibre using a LED Light source.
To determine the radius of curvature of Plano-convex lens by using Newton’s ring apparatus.
To determine the wavelength of different colours of white light using diffraction grating by spectrometer.
To determine the resolving power of diffraction grating.
To determine the resolving power of Telescope.
To determine the refractive index of material of Prism using spectrometer.
To determine the Acceleration due to Gravity in the Laboratory using Bar Pendulum and to estimate the
Radius of Gyration of the Bar-Pendulum.
2
9.
To determine the Diameter of a Thin Wire using the Phenomena of Diffraction using Beam of Light from
a Helium-Neon Laser.
10. To study the V-I characteristics of Solar Cell at different luminous intensity, V-I characteristics of photo
diode.
CY110 Chemistry/ CY111 Chemistry-I
1.
2.
3.
4.
5.
6.
To find the flash and fire points of given oil sample by Abel’s closed cup apparatus.
To find the flash and fire points of a given oil sample by Cleveland’s open cup apparatus.
To find the flash and fire points of given oil sample by Pensky Marten’s closed cup apparatus.
To determine the effect of temperature on the viscosity of the given oil using Redwood Viscometer No 1.
To determine the effect of temperature on the viscosity of the given oil using Redwood Viscometer No 2.
To determine the strength of unknown solution of CuSO4 in gm/L by Iodometric titration using Sodium
thiosulphate (Hypo) as an intermediate solution, KI as a source of iodine and starch as an adsorption
indicator. The concentration of known solution of CuSO4 is N/40.
7. To determine the strength of unknown solution of Ferrous Ammonium Sulphate (FAS) in g/L by redox
titrations using potassium dichromate as an intermediate solution and diphenylamine as an internal
indicator. The concentration of known solution of Ferrous Ammonium Sulphate (FAS) is N/40.
8. To determine the strength of unknown solution of Ferrous Ammonium Sulphate (FAS) in g/L by redox
titrations using potassium dichromate as an intermediate solution and potassium ferricyanide as an
external indicator. The concentration of known solution of Ferrous Ammonium Sulphate (FAS) is N/40.
9. To determine total hardness of given water sample in ppm in terms of CaCO3 equivalents by
complexometric titration using EDTA solution as an intermediate and Eriochrome Black-T (EBT) as an
internal metal ion indicator. The strength of standard hard water of CaCO3 is 1.0 g/L.
10. To determine the type and extent of alkalinity present in given water sample in mg/L by neutralization
titration against N/50 H2SO4 solution using phenolphthalein and methyl orange as internal indicators.
EC110 Fundamentals of Electronics Engineering
1.
Study of electronic components- active & passive, Electronic Instruments: CRO, Function generator,
Power Supply, Multi-meter, IC tester. Solder practice.
2. Study of different types of signals and their properties (Analog & digital).
3. Study of Various Logic Gates.
4. Study of Realization of Boolean function.
5. Study of Amplitude Modulated Wave.(AM)
6. Study of Frequency Modulated Wave.(FM)
7. Study of CRO & Measurement of amplitude and frequency.
8. Study of Test and Measuring instruments.
9. To verify and plot V-I Characteristics of PN Junction diode.
10. To verify and plot V-I Characteristics of Zener diode.
3
ANNEXURE ‘B’
Questions designed for the ‘Unified Online Practical Examination’ shall be of nature such that they suitably
assess the examinee’s familiarization with the following aspects:




Features of instruments such as weight, make, working principle, important components etc.
Observations and significant conclusions
Fundamental principles in theory related to practicals
Errors and tolerances
4
ANNEXURE ‘C’
Bachelor of Engineering (Mechanical Engineering)
Following questions are Multiple Choice Based. Select the appropriate answer.
SECTION ONE
SUBJECT: CY110 CHEMISTRY
QUESTION 1
QUESTION 6
QUESTION 2
QUESTION 7
QUESTION 3
QUESTION 8
QUESTION 4
QUESTION 9
QUESTION 5
QUESTION 10
SECTION TWO
SUBJECT: CE110 ENGINEERING MECHANICS
QUESTION 1
QUESTION 6
QUESTION 2
QUESTION 7
QUESTION 3
QUESTION 8
QUESTION 4
QUESTION 9
QUESTION 5
QUESTION 10
SECTION THREE
SUBJECT: ME111 ENGINEERING GRAPHICS
QUESTION 1
QUESTION 6
QUESTION 2
QUESTION 7
QUESTION 3
QUESTION 8
QUESTION 4
QUESTION 9
QUESTION 5
QUESTION 10
SECTION FOUR
SUBJECT: HU110 ENGLISH
QUESTION 1
QUESTION 6
QUESTION 2
QUESTION 7
QUESTION 3
QUESTION 8
QUESTION 4
QUESTION 9
QUESTION 5
QUESTION 10
5
ANNEXURE ‘D’
Semester
Branch
Subjects for which Practical Examination is to be
SEMESTER
FIRST
conducted
Semester
MECHANICAL
ENGINEERING
S.No.
Subject Code
Subject Name
1
CY110
Chemistry
2
CE110
Engineering Mechanics
3
ME111
Engineering Graphics
4
HU110
English
Branch
Subjects for which Practical Examination is to be
SEMESTER
FIRST
conducted
SEMESTER
FIRST
Semester
Semester
INDUSTRIAL &
PRODUCTION
ENGINEERING
Branch
CIVIL ENGINEERING
S.No.
Subject Code
Subject Name
1
CY110
Chemistry
2
CE110
Engineering Mechanics
3
ME111
Engineering Graphics
4
HU110
English
Subjects for which Practical Examination is to be conducted
S.No.
Subject Code
Subject Name
1
CY110
Chemistry
2
CE110
Engineering Mechanics
3
ME111
Engineering Graphics
4
HU110
English
Branch
Subjects for which Practical Examination is to be
conducted
FIRST SEMESTER
S.No.
Subject
Subject Name
Code
(ELECTRICAL ENGINEERING/
ELECTRICAL & ELECTRONICS
ENGINEERING)
1
PH110
Physics
2
CE110
Engineering
Mechanics
3
ME111
Engineering Graphics
4
HU110
English
6
Semester
Branch
Subjects for which Practical Examination is to be
conducted
FIRST SEMESTER
S.No.
Semester
Subject
Subject Name
Code
ELECTRONICS &
COMMUNICATION
ENGINEERING
1
PH110
Physics
2
CE110
Engineering
Mechanics
3
ME111
Engineering Graphics
4
HU110
English
Branch
Subjects for which Practical Examination is to be
conducted
FIRST SEMESTER
S.No.
Semester
Subject
Subject Name
Code
COMPUTER SCIENCE &
ENGINEERING
1
PH110
Physics
2
EC110
Fundamentals of
Electronics Engineering
3
ME111
Engineering Graphics
4
HU110
English
Branch
Subjects for which Practical Examination is to be
conducted
FIRST SEMESTER
S.No.
Subject
Subject Name
Code
INFORMATION TECHNOLOGY
1
PH110
Physics
2
EC110
Fundamentals of
Electronics Engineering
3
ME111
Engineering Graphics
4
HU110
English
7
Semester
Branch
Subjects for which Practical Examination is to be
conducted
FIRST SEMESTER
S.No.
Semester
Subject
Subject Name
Code
AUTOMOBILE ENGINEERING
1
CY110
Chemistry
2
CE110
Engineering
Mechanics
3
ME111
Engineering Graphics
4
HU110
English
Branch
Subjects for which Practical Examination is to be
conducted
FIRST SEMESTER
S.No.
Semester
Subject
Subject Name
Code
AERONAUTICAL
ENGINEERING
1
CY110
Chemistry
2
CE110
Engineering
Mechanics
3
ME111
Engineering Graphics
4
HU110
English
Branch
Subjects for which Practical Examination is to be
conducted
FIRST SEMESTER
S.No.
Subject
Subject Name
Code
CHEMICAL
ENGINEERING
1
CY111
Chemistry-I
2
CE110
Engineering
Mechanics
3
ME111
Engineering Graphics
4
HU110
English
8
Semester
Branch
Subjects for which Practical Examination is to be
conducted
FIRST SEMESTER
S.No.
Semester
Subject
Subject Name
Code
PETROCHEMICAL
ENGINEERING
1
CY110
Chemistry
2
CE110
Engineering
Mechanics
3
ME111
Engineering Graphics
4
HU110
English
Branch
Subjects for which Practical Examination is to be
conducted
FIRST SEMESTER
S.No.
Semester
Subject
Subject Name
Code
MINING ENGINEERING
1
CY110
Chemistry
2
CE110
Engineering
Mechanics
3
ME111
Engineering Graphics
4
HU110
English
Branch
Subjects for which Practical Examination is to be
conducted
FIRST SEMESTER
S.No.
Subject
Subject Name
Code
FIRE TECHNOLOGY
1
CY110
Chemistry
2
CE110
Engineering
Mechanics
3
ME111
Engineering Graphics
4
HU110
English
9
Semester
Branch
Subjects for which Practical Examination is to be
conducted
FIRST SEMESTER
S.No.
Semester
Subject
Subject Name
Code
BIOMEDICAL ENGINEERING
1
PH110
Physics
2
CE110
Engineering
Mechanics
3
ME111
Engineering Graphics
4
HU110
English
Branch
Subjects for which Practical Examination is to be
conducted
FIRST SEMESTER
S.No.
Semester
Subject
Subject Name
Code
ELECTRONICS &
INSTRUMENTATION
ENGINEERING
1
PH110
PHYSICS
2
CE110
Engineering
Mechanics
3
ME111
Engineering Graphics
4
HU110
English
Branch
Subjects for which Practical Examination is to be
conducted
FIRST SEMESTER
S.No.
Subject
Subject Name
Code
B.PHARM
1
PY110
Biology
2
PY111
Physical Pharmacy- I
3
PY112
Pharmaceutical
Chemistry-I (Inorganic
Chemistry)
4
HU110
English
10
Semester
Branch
Subjects for which Practical Examination is to be
conducted
FIRST SEMESTER
S.No.
Subject
Subject Name
Code
B.ARCH.
1
AR110
Architecture Design-I
2
AR112
Graphics-I
3
CE110
Engineering
Mechanics
4
HU110
English
1. CY111 Chemistry-I
2. PY110 Biology
PY111 Physical Pharmacy- I
PY112 Pharmaceutical Chemistry-I (Inorganic Chemistry)
AR110 Architecture Design-I
AR112 Graphics-I
11