Impact Wrench 2016
MICHIGAN
PNEUMATIC TOOL
Industrial Air Tools
Heavy-Duty Industrial
WRENCHES
Serving All Industries
• Petro Chemical
• Construction
• Assembly
• Foundry
• Rental
1-800-521-8104
• www.michiganpneumatic.com
MP-1700 Pistol Impact –– 1/2" Square Drive
MP-1700
Features a friction ring anvil. Twin Hammer clutch mechanism provides good
durability and performance. Excellent weight and balance to reduce operator
fatigue. High output motor provides high torque levels for removing nuts.
Model MP-1700P2 with a 2" extended anvil also available.
Model MP-1700PA with pin-type anvil also available.
Square
Drive
Max Torque
Free Speed
Length
Weight
Air Inlet
Thread
Rec’d
Hose Size
Avg. Air
Consumption
1/2"
370 ft-lbs
6500 rpm
7"
5.3 lbs
1/4"
1/4"
23.8 cfm
MP-2660 Pistol Impact –– 3/4" Square Drive
MP-2660-6 6" Extended Anvil Impact –– 3/4" Square Drive
#2660-HGR
The MP-2660 is the most powerful weight to torque ratio tool in our product line.
This tool often replaces major brand name tools in the rental, heavy industrial and
petro chemical applications. Outstanding cost to performance ratio as well to help
you gain market share.
3 Position Bail/Hanger (#2660-HGR) also available.
MP-2660
MP-2660-6
Square
Drive
3/4"
Max Torque
Free Speed
1100 ft-lbs 5500 rpm
Length
Weight
Air Inlet
Thread
Rec’d
Hose Size
Avg. Air
Consumption
9"
9.50 lbs
3/8"
1/2"
14-38 cfm
MP-2920 Pistol Impact –– 3/4" Square Drive
MP-2920-1 Pistol Impact –– 1" Square Drive
MP-2920
Features a twin hammer clutch for more power per pound, a pressure fed clutch
lubrication system, two piece motor housing for easy maintenance, a built-in
muffler for low noise and direct drive for fast run down.
Square
Drive
3/4",1"
Free Speed
Length
Weight
Air Inlet
Thread
Rec’d
Hose Size
Avg. Air
Consumption
1100 ft-lbs 5500 rpm
12.5"
12 lbs
3/8"
1/2"
38 cfm
Max Torque
MP-6060 Pistol Impact –– 3/4" Square Drive
MP-6060-1 Pistol Impact –– 1" Square Drive
MP-6060-#4 Spline Pistol Impact –– #4 Spline Drive
A powerful two-jaw clutch and steel clutch housing design offers power and
dependability. Adjustable power regulator for forward-reverse control built in.
MP-6060
Square
Drive
Max Torque
Free Speed
Length
Weight
Air Inlet
Thread
Rec’d
Hose Size
Avg. Air
Consumption
3/4",1"
#4 Spline 1100 ft-lbs
3000 rpm
12.5"
12 lbs
3/8"
1/2"
38 cfm
MP-2925 Pistol Impact –– 3/4" Square Drive
MP-2925-1 Pistol Impact –– 1" Square Drive
MP-2925-#4 Spline Pistol Impact –– #4 Spline Drive
MP-2925
Ergonomic handle and trigger make it easy for the operator to maneuver and
activate this impacting tool. Considered to be the most powerful 3/4" impact on
the market today. Ideal for rental, petro chemical, and heavy industry.
Parts interchangeable with Ingersoll Rand IR-2925 series tool.
#4 Spline Anvil #2910-A526
Square
Drive
#2910-A526
2
Max Torque
Free Speed
Length
Weight
Air Inlet
Thread
Rec’d
Hose Size
Avg. Air
Consumption
3/4",1"
1595 ft-lbs
#4 Spline
5200 rpm
9.88"
13 lbs
3/8"
1/2"
15-45 cfm
MP-1040EITH
MP-1034EITH
MP-1550EITH
Heavy-Duty Impact Wrenches
Features a twin hammer clutch for more power per pound, a pressure fed clutch lubrication system, two piece motor
housing for easy maintenance, a built-in muffler for low noise and direct drive for fast run down. Parts are
interchangeable with Ingersoll-Rand 2934, 2940 and 2950 series impact wrenches.
Model No.
Drive
MP-1034EITH
1" Sq. Through-Hole
MP-1034EOTH
1" Sq. Through-Hole
MP-1034EI5S
#5 Spline
MP-1034EO5S
#5 Spline
MP-1040EITH
1" Sq. Through-Hole
MP-1040EOTH
1" Sq. Through-Hole
MP-1034EI5S
#5 Spline
MP-1040EO5S
#5 Spline
MP-1550EITH 1-1/2" Sq. Through-Hole
MP-1550EOTH 1-1/2" Sq. Through-Hole
MP-1550EI5S
#5 Spline
MP-1550EO5S
#5 Spline
Max
Torque
Free
Speed
Handle Type
Length
Weight
Inside Trigger
Outside Trigger
11-1/4" 19 lbs
Inside Trigger
Outside Trigger
Inside Trigger
16005000 Outside Trigger 122000
22 lbs
rpm
Inside Trigger 13/32"
ft-lbs
Outside Trigger
Inside Trigger
2500- 3750
Outside Trigger
3000 rpm
14-1/2" 33 lbs
Inside Trigger
ft-lbs
Outside Trigger
11006600
1500
rpm
ft-lbs
MP-1011EOTH
Air Inlet
Thread
Rec’d
Avg. Air
Hose Size Consumption
1/2"
3/4"
47 cfm
1/2"
3/4"
58 cfm
1/2"
3/4"
70 cfm
MP-1520EITH
Heavy-Duty Impact Wrenches
Features a high energy per blow two jaw clutch, rugged steel clutch housing machined from bar stock, bronze alloy
end plates for long motor life, a two piece housing for ease of maintenance, high power-to-weight ratio. Parts are
interchangeable with Chicago Pneumatic 611 and 6120 series impact wrenches.
Model No.
MP-1011EITH
MP-1011EOTH
MP-1011EI5S
MP-1011EO5S
MP-1520EITH
MP-1520EI5S
Drive
1" Sq. Through-Hole
1" Sq. Through-Hole
#5 Spline
#5 Spline
Max
Torque
Free
Speed
1800- 6000
2800 rpm
ft-lbs
25003000
1-1/2" Sq. Through-Hole
3000
rpm
#5 Spline
ft-lbs
Handle Type
Length
Weight
Air Inlet
Thread
Rec’d
Avg. Air
Hose Size Consumption
Inside Trigger
Outside Trigger
22.50
Inside Trigger 12-1/2" lbs
Outside Trigger
1/2"
3/4"
47 cfm
33.75
lbs
1/2"
3/4"
60 cfm
Inside Trigger
14-3/4"
3
Extra Heavy-Duty Impact Wrenches
Features through-hole anvil, lever throttle, reinforced hangers, heat treated hammer, anvil, cams. Designed to produce
an exceptionally high torque output. Effective for shipyards, bridge construction, building construction and heavy
manufacturing plants. Time tested design for maximum durability.
Model No.
Drive
Max Torque
Free
Speed
Length
Weight
Air Inlet
Thread
Rec’d
Hose Size
Avg. Air
Consumption
MP-5980
MP-2588
MP-3599
1-1/2" Sq. Through-Hole
2-1/2" Sq. Through-Hole
3-1/2" Sq. Through-Hole
10,000 ft-lbs
50,000 ft-lbs
80,000 ft-lbs
830 rpm
355 rpm
295 rpm
23"
26.63"
37.5"
88 lbs
215 lbs
600 lbs
3/4"
1"
1-1/4"
1"
1"
1-1/2"
138 cfm
155 cfm
375 cfm
MP-5980
*All Extra Heavy-Duty
Impacts come with a live
handle and dead handle
MP-2588
MP-3599
*Ask your sales
representative about
our variety of sockets
and other impact
accessories
4
Repair and Tune Up Kits for most Industrial Models
• IR-2920P
• IR-2925P
• IR-2934
• IR-2940
• IR-3940
• IR-3942
• IR-2945
• IR-2950
• CP-6060
• CP-0611
• CP-6120
*Call for other models
not listed
5
HiVis Air Movers
HiVis venturi style air movers are used in many industrial and construction sites where there is a
need to disperse hazardous fumes, move air into a confined space, cool individuals in elevated
temperature conditions, or ventilate equipment and machinery with a blast of directed air.
Common applications include shipyards, refineries, chemical plants, paper mills and
manhole ventilation.
• No moving parts
• Minimal required maintenance
• Can be used as a blower
or for exhaust
• Safe in hazardous areas
• Performance tested
• Lightweight and portable
HV-3AMS
HV-3AM
HV-6AM
HV-8AM
HV-10AM
Model No.
Overall
Length
Base
Diameter
Top of Horn
Diameter
Bolt Circle
Diameter
Base Slot
Diameter
Weight
Air Inlet
Thread
HV-3AMS
HV-3AM
HV-6AM
HV-8AM
HV-10AM
16.75"
30.50"
44.25"
46.06"
48.00"
7.31"
7.31"
11.25"
14.37"
17.00"
6.00"
7.00"
12.50"
14.25"
15.75"
6.56"
6.56"
10.50"
13.62"
15.50"
0.4"
0.4"
0.4"
0.5"
1.0"
5.8 lbs
8.5 lbs
20.9 lbs
38.9 lbs
40.8 lbs
1/2"
1/2"
1"
1"
1"
*Ground wires with clamp included.
Inlet Pressure - Total Air Flow
6
Inlet Pressure - Air Consumption
Model No.
40 psig
60 psig
HV-3AMS
HV-3AM
HV-6AM
HV-8AM
HV-10AM
815 cfm
1017 cfm
2385 cfm
3152 cfm
4898 cfm
981 cfm
1231 cfm
2885 cfm
4152 cfm
6182 cfm
80 psig
1182
1462
3347
4929
7304
cfm
cfm
cfm
cfm
cfm
Model
40 psig
60 psig
80 psig
HV-3AMS
HV-3AM
HV-6AM
HV-8AM
HV-10AM
36 cfm
35 cfm
73 cfm
114 cfm
154 cfm
50 cfm
45 cfm
98 cfm
152 cfm
209 cfm
62 cfm
62 cfm
124 cfm
193 cfm
274 cfm
HV-Twin-PAK
Our HiVis Twin-PAK allows two operators to run tools simultaneously
from one air supply. Portable, stackable and compact, it is designed to
deliver clean, dry, lubricated air. 100% of visible moisture is removed and
automatically purged by the integral S7F water filter which is virtually
maintenance free. The integrated 1LF filter/lubricator combo filters air
down to 40 microns, and the oiler has a 3.7oz capacity for extended use.
As a bonus feature, an overflow safety valve will shut air off to both tools in
the event of a connector breaking or hose being severed.
Height
Length
Depth
Weight
15"
29"
10"
32 lbs
HV-15G-8P
Eliminate the clutter and run just one hose to your
worksite, and then connect up to eight pneumatic
tools at once. Equipped with a gauge to monitor
working pressure and a 200 psi pressure release
valve to prevent excess pressure build up. Top
and bottom brackets allow for easy stacking or
mounting to skids or other surfaces. Connect or
stack multiple manifolds to handle the busiest
worksites.
Number of
3/4" Outlets
Capacity
Working
Pressure
Test
Pressure
Inlet
Size
Tank
Diameter
8
15 gal
200 psi
300 psi
2"
12"
Width with
Fittings
Height
22-1/2" 16-1/2"
Length
Weight
44"
72 lbs
HV-6-PAK
Used in any industry with a need for multiple
air outlets to supply various pneumatic tools
simultaneously. The 1-1/2" inlet can be dispersed
through up to six separate outlets using CP
couplings. Each has a manual shut-off valve
and moisture separator with auto drain valve,
increasing tool life. Rugged steel tubular design
with tabs, can be rolled to the jobsite and allows
unit to be lifted and stacked.
Diameter
Height
Weight
Inlet
Size
36"
18"
175 lbs
1-1/2"
7
Supplemental Tool
Catalog
Construction
Air Tools
Material Removal
Chipping Hammer
& Rivet Busters
Winches & Material
Handling
MICHIGAN PNEUMATIC TOOL
Industrial Air Tools
6850 Middlebelt Rd. • P.O. Box 906
Romulus, MI 48174-7406
Copyright ©2016 Michigan Pneumatic® Tool, Inc.
011916Rev3DED