U.S. Nuclear Power Plant Selects DuraQuartz for Critical Cooling

®
EC-003
U.S. Nuclear
Power Plant
Selects DuraQuartz
for Critical Cooling
Tower Repairs
The engineers at this
nuclear power station
located in the northeastern
U.S., had a serious
concrete deterioration
problem in their massive
cooling towers.
Conventional concrete
patching materials gave
only limited performance
due to extreme weather
conditions coupled with
severe freeze-thaw cycles.
The plant engineers
wanted the best material
available to rebuild the
damaged concrete areas in
the cooling tower and they
also wanted the best
possible technical support
during the repair procedure.
ENECRETE DuraQuartz
from ENECON was
ultimately selected by the
engineers not only
because of its outstanding
physical properties, but
also because they had the
confidence in their local
ENECON Fluid Flow
Systems Specialist, that
he would be on-site
throughout the project,
thus insuring its success.
The nuclear plant
purchased an initial order
totaling 50 DuraQuartz
units. The ENECON
Engineer assisted by Bob
Barr, who heads up
ENECON North East,
supervised the plant’s
able crew during the
entire application.
The plant engineers are
delighted with the results
and are already thinking
of other uses for this
outstanding concrete
repair and protection
material.
6 Platinum Court • Medford, NY 11763
Toll Free: 888-4-ENECON® (888-436-3266) • Phone: 516-349-0022 • Fax: 516-349-5522
www.enecon.com • [email protected]
®
Copyright ©2013 by ENECON Corporation.
™