FTR-K1 SERIES
POWER RELAY
1 POLE - 6A Slim Type (Medium Load Control)
FTR-LY Series
n FEATURES
Slim 15.0mm (h) x 5.0 mm (w) x 28.0mm (l) (straight type)
5.0mm (h) x 15.0mm(w) x 28.0mm (l) (right angle type)
l
1 form C and 1 form A
l
Straight and right angle type available
l
Mounting space: 140mm2 (straight type), weight: 5.0g
l
High insulation in small package
Insulation distance (between coil and contacts): 8mm
(creepage/clearance)
Dielectric strength: 4,000 VAC
Surge strength: 6,000V
l
Plastic sealed type RTIII
l
UL, CSA, VDE compliance
l
Socket type available
l
RoHS compliant
Please see page 7 for more information
l
n PARTNUMBER INFORMATION
FTR-LY
[Example]
(a)
(a)
A
(b)
Relay type
A
(c)
005 Y - SK
(d) (e)
(f )
FTR-LY : FTR-LY-Series
(b)
Contact configuration
A
C
P
R
: 1 form A
: 1 form C
: 1 form A (right angle type)
: 1 form C (right angle type)
(c)
A
: Standard type (170mW)
Coil type
(d)
Coil rated voltage
005
: 5.....60 VDC
Coil rating table at page 3
(e)
Contact material E
Y
V
: AgNi
: AgSnO2
: AgSnO2 + Au plating
(f)
Nil
SK
: PCB mounting type
: Socket mounting type (only contact configuration A and C
Special type
Actual marking does not carry the type name : "FTR" and "SK"
E.g.: Ordering code: FTR-LYAA005Y-SK Actual marking: LYAA005Y
1
FTR-K1
SERIES
FTR-LY
SERIES
n SPECIFICATION
Item
Contact Data
Life
Coil Data
Timing Data
Insulation
LY (C,R) A ( ) (Y,E,V)
LY (A,P) A ( ) (Y,E,V)
Configuration
1 form C (SPDT)
1 form A (SPST-NO)
Construction
Single
Material
Y: AgSnO2 / E: AgNi / V: AgSnO2 + Au plating
Resistance (initial)
Y, E: Max. 100 mΩ at 6 VDC, 1 A
V: Max. 30 mΩ at 6 VDC, 1A
Contact rating
6A, 250VAC / 24VDC (resistive)
Max. carrying current
6A
Max. switching voltage
250VAC
Max. switching power
1,500VA / 144W
Min. switching load *
Y, E: 100 mA 5 VDC
V: 10mA 5 VDC
Mechanical
Min. 10 x 106 operations
Electrical
Min. 50 x 103 operations (N.O.)
Min. 30 x 103 operations (N.C.) at 6A, 250VAC / 24VDC
resistive
Rated power
170 to 217 mW
Operate power
74 to 95 mW
Operating temperature range
-40 °C to +85 °C (no frost)
Operate (at nominal voltage)
Max. 8ms (no diode, without bounce)
Release (at nominal voltage)
Max. 4ms (no diode, without bounce)
Resistance (initial)
Min. 1,000MΩ at 500VDC
Dielectric strength
Surge strength
1,000VAC (50/60Hz) 1min.,10mA detection current
Contacts to coil
4,000VAC (50/60Hz) 1min.,10mA detection current
Coil to contacts
6,000V / 1.2 x 50µs standard wave
Clearance
8 mm
Creepage
8 mm
EN61810-1, VDE0435
Other
Open contacts
Vibration resistance
Shock
Voltage
250V
Pollution degree
3
Material group
III a
Category
C / 250V
Misoperation
10 to 55 to 10Hz single amplitude 0.5mm
Endurance
10 to 55 to 10hz single amplitude 0.75mm
Misoperation
Min. 50m/s² (11 ± 1ms)
Endurance
Min. 1,000m/s² (6 ± 1ms)
Weight
Approximately 5 g
Sealing
Plastic sealed RTIII
Min. 100m/s² (11 ± 1ms)
* Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual
load before production since reference values may vary according to switching frequencies, environmental conditions
and expected reliability levels.
2
FTR-K1
SERIES
FTR-LY
SERIES
n COIL RATING
Coil
Code
Rated Coil
Voltage
(VDC)
Coil Resistance
+/- 10% (Ohm)
Must Operate
Voltage
(VDC) *
Must ReleaseVoltage
(VDC) *
005
5
147
3.3
0.25
006
6
211
4
0.3
009
9
476
5.9
0.45
012
12
847
7.9
0.6
018
18
1,910
11.9
0.9
024
24
3,390
15.9
1.2
048
48
10,600
31.7
2.4
217
060
60
20,570
39.6
3
175
Rated Power
(mW)
170
* : Specified operate values are valid for pulse wave voltage
Note 1: All values given in the coil table(s) are valid at 20°C ambient temperature, at zero contactcurrent, without
pre-energizing and are specified at pulse wave voltage.
Note 2: When applying a higher than rated coil voltage, please refer to the "coil temperature rise" and "operating
range" reference graphs, for the effects on the relay operating behaviour.
n SAFETY STANDARDS
Type
Compliance
Contact rating
UL
UL 508
Flammability: UL 94-V0 (plastics)
6A, 277 VAC (resistive)
6A, 30 VDC (resistive)
1/10 HP, 277VAC /125VAC 1/8hp, 277VAC/125VAC
Pilot duty: D300, C300, R300, B300
E63614
CSA
C22.2 No. 14
LR 40304
VDE
40006591
IEC/EN61810-1 (VDE 0435-part 201)
EN 60730-1 (VDE 0631-Part 1)
*1
6A 250VAC (cosφ=1),
6A 30VDC (0ms)
EN 60335-1 (VDE 0700-Part 1) *2
*1: Clause 12.2, 13.2, 20.1, 20.2, 20.3, 17.5, 17.7, 17.8
*2: Clause 15.3, 16.3, 29.1, 29.2, 29.3
3
FTR-K1
SERIES
FTR-LY
SERIES
n CHARACTERISTIC DATA (For reference only)
Coil Temperature rise
Operating range
Maximum switching power
10
2.5
50
AC resistive
Temperature rise (℃)
40
30
6A
20
0A
10
0
90
Must
0
ltag
te vo
opera
)
ool coil
ltage (c
erate vo
Must op
20 40 60 80 100 120
Life curve
100
50
30
20
10
5
3
2
0.2
0.5
1
2 3
6
50
30
20
10
5
3
2
70
80
70
FTR-LYCA012Y
n=100
Operate voltage
Release voltage
60
50
40
30
10
0.2
6 10
0.5
1
2 3
Contact current (A)
0
0 10 20 30 40 50 60 70 80 90 100
Nominal voltage multiplying factor (%)
Make
50
40
80
Break
60
50
40
30
20
20
10
10
Contact Resistance (Ω)
Operate
70
30
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
FTR-LYCA012Y
n=100
90
FTR-LYCA012Y
n=100
Break
60
0
90
Distribution of operate/release time
Distbitution (%)
80
500
100
100
90
50
100 200
Contact voltage (V)
20
Contact current (A)
Distribution of contact resistance
20
100
24VDC t=0, NO
24VDC t=7, NO
24VDC t=15, NO
100
1
0.1
10
at 20℃
Distribution (%)
Service life (1x104 operations)
Service life (1x104 operations)
250VAC cosφ=1, NO
250VAC cosφ=0.7, NO
250VAC cosφ=0.4, NO
0.1
10
Distribution of operate/release voltage
1000
500
300
200
DC resistive
1
Ambient temperature (℃)
at 20℃
1
0.1
Distbitution (%)
)
t coil
e (ho
1.0
Life curve
1000
500
300
200
0A
1.5
0.5
100
110
120
130
140
Nominal voltage multiplying factor (%)
6A
2.0
Contact current (A)
Nominal voltage multiplying factor
(6)
0
0
1
2
3
4
5
6
7
8
9 10
Time (ms)
4
FTR-K1
SERIES
FTR-LY
SERIES
n DIMENSIONS
■外形寸法
●端子配列・内部結線図
Schematics
（
(BOTTOM
BOTTOM VIEW)
VIEW）
●外形寸法図
Straight type
ストレートタイプ
15MAX
28 MAX
2
(※)
(0.7)
3.78
3- 1
5.04
）
（BOTTOM
(BOTTOMVIEW
VIEW)
Pre予備はんだ
soldering
(1.2)
5.04
16.38
φ 1
2-φ
φ 1.3
3-φ
5 +0.08
(0.7)
5.04
3.78
5.04
16.38
(1.2)
0.5
5
●基板孔開け図
PCB Layout
3.5
0.5
※) 4
3 ((*)
1
Tolerance: +/-0.1
寸法公差は±
0.1です。
Right angle type
●端子配列・内部結線図
Schematics
（
BOTTOMVIEW)
VIEW）　(BOTTOM
●外形寸法図
Right angle type
ライトアングルタイプ　1
※) 4
3 ((*)
2
5
15+0
15+0
(※)
3
(*)
3
0.5
(0.7)
0.5
(0.7)
5 +0.08 5 +0.08
15MAX
28 MAX
3.78
3- 1
0.5
16.38
3- 1
28+0
16.38
28+0
予備はんだ
5.04
5.04
5.04
5.04
Pre-soldering
2-φ 1
3.78
(0.7)
2-φ1
(28)
(28)
16.38
φ1.3
3-φ
5.04
5.04
(14.5)
(15.3)
3.78
0.5
PCB Layout
●基板孔開け図
VIEW)
）
（(BOTTOM
BOTTOM VIEW
Tolerance: +/-0.1
寸法公差は±0.1です。
※：
3 番端子はメーク品の場合、実装されておりません。
* This
terminal is not applicable for 1 form A type.
* Dimensions of the terminals do not include thickness of pre-solder.
（　）内の寸法は参考寸法です。
( ) : Reference value
単位：
Unit:
mm
mm
5
1
0.5
3.78
0.5
(0.7)
16.38
1
28MAX
30.8MAX
0.5
3.78
1
1
5.04
5.04
15MAX
1.5
5.1MAX (1.2)
2-Ф 116.38
3.78
16.38
5.04
5.04
3-Ф 1.3
0.257
5.04
(1.2)
3.78
5.04
3.5
5.04
1.5
16.38
5.1MAX (1.2)
28MAX
（注）端子寸法は予備はんだ前の寸法です。
30.8MAX 安定用端子
6-0.8
2.77 5.04
5.04
3-Ф1.3
(1.2)
6.3MAX
15.7MAX
0.7
0.8
1
PCB layout 2-Ф1
(BOTTOM VIEW)
1
5.04
3.78
1.5
5.1MAX (1.2)
0.8
3.2
3.5
1
0.5
3.78
Tolerance: +/-0.1
2.7
21.42
30.8+0.2
JM-6N
5.04
16.38
28MAX
Schematics
30.8MAX
(BOTTOM
VIEW)
Socket type
0.5
(0.7)
0.8
1
1
5.04
3.5
0.5
(0.7)
0.7
3.515MAX
0.7
6.3MAX
6.3MAX
15MAX
FTR-K1
SERIES
FTR-LY
SERIES
4.8+0.2
Socket (JM-6N)
3.2
PCB layout
(BOTTOM VIEW)
3.2
6-Ф 1.3
2.7
(1.2)
5.04
(1.2)
16.38
15.7MAX
5.04
3.78
15.7MAX
3-Ф1.3
2-Ф1
6-0.8 6-0.8
3.5
3.5
(2.1)
2.77 5.04
5.04
21.42
Fixed
安定用端子
terminals 2.77 5.04
2.77 5.04
5.04 5.04
3.78 3.78
3.78
0.257 0.257
21.42 21.42
2.7
30.8+0.230.8+0.2
4.8+0.2 4.8+0.2
Tolerance: +/-0.1
2.7
安定用端子
( ): Reference value
Unit: mm
6
FTR-K1
SERIES
FTR-LY
SERIES
RoHS Compliance and Lead Free Information
1. General Information
All relays produced by Fujitsu Components are compliant with RoHS directive 2011/65/EU including
amendments.
l Cadmium as used in electrical contacts is exempted from the RoHS directives.
As per Annex III of directive 2011/65/EU.
l All relays are lead-free. Please refer to Lead-Free Status Info for older date codes at:
http://www.fujitsu.com/downloads/MICRO/fcai/relays/lead-free-letter.pdf
l Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified.
This material has been verified to be compatible with PbSn assembly process.
l
2. Recommended Lead Free Solder Condition
l
Recommended solder Sn-3.0Ag-0.5Cu.
Flow Solder Condition:
Pre-heating:
maximum 120˚C
within 90 sec.
Soldering:
dip within 5 sec. at
255˚C ± 5˚C solder bath
Relay must be cooled by air immediately
after soldering
Solder by Soldering Iron:
Soldering Iron 30-60W
Temperature: maximum 340-360˚C
Duration:
maximum 3 sec.
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
l
Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated.
4. Tin Whiskers
l
Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length
whisker was found by our in house test.
7
FTR-K1
SERIES
FTR-LY
SERIES
Fujitsu Components International Headquarter Offices
Japan
FUJITSU COMPONENT LIMITED
Shinagawa Seaside Park Tower 19F,
12-4, Higashi-shinagawa 4-chome, Shinagawa-ku,
Tokyo,140-0002, Japan
Tel: (81-3) 3450-1682
Fax: (81-3) 3474-2385
Email: [email protected]
Web: www.fujitsu.com/jp/fcl/
Asia Pacific
FUJITSU COMPONENTS ASIA, LTD.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: [email protected]
Web: www.fujitsu.com/sg/products/devices/components
North and South America
FUJITSU COMPONENTS AMERICA, INC
2290 North First Street, Suite 212
San Jose, CA 95131, USA
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: us.fujitsu.com/components
China
FUJITSU ELECTRONIC COMPONENTS (SHANGHAI) CO., LTD.
Unit 4306, InterContinental Center
100 Yu Tong Road, Shanghai 200070,
China
Tel: (86-21) 3253 0998
Fax: (86-21) 3253 0997
Email: [email protected]
Web: www.fujitsu.com/sg/products/devices/components
Europe
FUJITSU COMPONENTS EUROPE B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: www.fujitsu.com/uk/components
Hong Kong
FUJITSU COMPONENTS HONG KONG CO., LTD
Unit 506, Inter-Continental Plaza
No.94 Granville Road, Tsim Sha Tsui, Kowloon,
Hong Kong
Tel: (852) 2881-8495
Tex: (852) 2894-9512
Email: [email protected]
Web: www.fujitsu.com/sg/products/devices/components/
Korea
FUJITSU COMPONENTS KOREA LIMITED
Alpha Tower #403, 645 Sampyeong-dong,
Bundang-gu, Seongnam-si, Gyeonggi-do,
13524 Korea
Tel: (82) 31-708-7108
Fax: (82) 31-709-7108
Email: [email protected]
www.fujitsu.com/sg/products/devices/components/
©2017 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective owners.
The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for general
information purposes.
The use of the contents, data and information provided in this datasheet is at the users’ own risk.
Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive,
complete and up to date.
Fujitsu Components Europe B.V. and affiliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its
employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related
graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof.
Nor do Fujitsu Components Europe B.V. and affiliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability
for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or fitness for particular use,
with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness,
usefulness, availability and completeness thereof. Rev. February 06th, 2017
8