Audio Visual LED Cube Matthew Daigle Robert Hunter Kendra Kreider Advisor: Richard Messner Overview Problem Definition Design Objectives Block Diagram Design Testing & Programming Goals Budget Project Timeline Problem Definition 3-D cube of LEDs Audio/visual effects in real time Completed within budget Presented at URC in April Design Objectives Build cube of LEDs 8x8x8 single color LEDs or 5x5x5 RGB LEDs Program LEDs To light up in different patterns To change in sync with music playing Control with computer Block Diagram Design Goal: 8x8x8 single color LED or 5x5x5 RGB LED Start with 3x3x3 single color LED cube Experimentation Learn how to use Arduino microcontroller Work on light and music programming Mimic expected design for second cube to become familiar with final circuit on a smaller scale Enabling LEDs Design does not allow for LEDs in separate columns to light simultaneously Flash LEDs faster that human eye can detect (persistence of vision) Anode & Cathode Mapping Building Solder Cube Check solder points before adding next layer Construct LED driver circuitry Wooden base LED Casing Testing & Programming Major part of project Testing- results will not be qualitative Programming Get acquainted with Arduino software Lighting- patterns Music- spectrum analysis Goals Size 3 single color cube Size 8 single color or size 5 RGB cube Effective light and music synchronization Programming development has no definitive end Dependent on time and knowledge of Arduino software Budget Parts Arduino Mega 2560 Microcontroller RGB LEDs or Single Color LEDs Plexiglass for casing Decoders (2-to-4 & 3-to-8) General Components (resistors, capacitors, transistors, etc.) Breadboards Shipping and Handling Cost $65 $80 $30 $15 Total $310 $70 $20 $30 Project Timeline Questions Picture Sources http://www.nenomart.com/catalog/index.php?cPath=39 http://v3spin.blogspot.com/2010/06/8x8x8-rgd-led-cube-testpattern.html http://www.tecratools.com/media/productImages/15206.jpg
© Copyright 2025 Paperzz