Lithium-Ionbattery soldering iron
Description
The new ST-80 lithium ion battery
short time. An LED on the charger in-
soldering iron takes advantage of
dicates the charge status of the ST-80.
modern battery technology, making
this soldering tool a persistent com-
With a special adapter cable the ST-80
panion wherever mobile soldering
can be charged by a USB port (PC) or
without power supply is needed. The
an external power pack. This allows
soldering iron is designed for solde-
an extended mobility, regardless of a
ring in electronics, electrical enginee-
power supply, batteries, or other spe-
ring or mechanics. So it is ideal for
cial auxiliary materials such as gas
service technicians, but also for many
soldering irons. The ST-80 is equipped
applications such as in the automotive
with a plugged tip. This can be quickly
sector, or in the model making and DIY.
replaced by a new or different tip.
The ST-80 impresses with its fast star-
The soldering iron heats up just as
tup and short heating time. In parti-
long as the On / Off button is pressed.
cular the long working time distingu-
This will increase safety, as the unit
ishes it significantly from previously
automatically shuts off. This avoids
available battery soldering irons.
unnecessary heating and will therefore
extend the working time and increase
Using an enclosed AC charger, the ST-
tip life time. The very short warm-up
80 is recharged quickly. Because of
still allows continuous work flow.
the lithium-ion technology there is no
need for a full charge, so that the ST80 is ready for quick usage after a very
Available in April / May 2013
technical data
Charger
Prim.
100-230V
50/60Hz
190mA
Sec.
Soldering
Iron
Li-IonBattery
Charge time
Working time
Heating-up
time
Max.
Temperature
4,2V=
1000mA
3,6V=/6W
2000mAh
ca. 3,5h
ca.75min
ca. 25sec
450°C
Included
Available Accessories
Art.-No. 249430
Art.-No. 249431
USB Charging Cable
ST-80 Lithium Ion Battery Soldering Iron
Art.-No. 249432
Pencil Tip
Charger
Art.-No. 249433 Chisel Tip
Soldering Tip Removing Tool
Manual
All information without guarantee of completeness and correctness. Subject to technical changes.
STANNOL 03-2013
STANNOL GmbH, Oskarstr. 3–7, D-42283 Wuppertal, Tel +49 202 585 -0, Fax +49 202 585 -111, E-Mail: [email protected], www.stannol.de