ID Tool:
The rivets are closer to the
edge than 1443E.
D
Very similar to 4524QM,
but the spring hole is further
from the table.
CO
CO
CO
CO
Closer
D
6"
4725E2(II)
R
2R
Steer
Axles
Only
A pressed-in pin must be present
here. Similar – except for the
drum size – to 4716E2(II).
E
7"
4709E
CO
CO
28
2X
Steer &
Trailer
Axles
D
Q
CO
2T
R
2P
6"
28
RE
4514Q(R)
R
2R
6"
32
4514HA
RE
GR O
2R
24
16½"
16½"
Steer,
Drive &
Trailer
Steer,
Drive &
Trailer
Steer,
Drive &
Trailer
D
Q
D
Q
Bendix/Eaton
7"
32
E
Rockwell/Meritor
E GR O
16½"
GR O
2X
Trailer
Axles
Only
D
Rockwell/Meritor
E GR O
20
Q
 High Volume Shoe 
4709E2(II)
16
Steer &
Trailer
Axles
Q
7"
32
GR O
12¼"
4709SII
Bendix/Eaton
R
E GR O
2R
7"
32
4709E
(UNIVERSAL)
RE
GR O
2X
UP
2P
R
2T
16½"
D
Bendix/
Eaton
E GR O
4715Q(R)
4524HA
16½"
Very similar to 4524Q(R),
but the spring hole is closer
to the table.
6"
14
Steer
Axles
Only
D
5"
16
Rockwell/Meritor
E GR O
16½"
GR O
2T
GR O
RE
UP
RE
GR O
UP
CO
Q
32
16½"
16½"
16½"
16½"
Drive &
Trailer
Axles
Steer,
Drive &
Trailer
Steer,
Drive &
Trailer
Steer,
Drive &
Trailer
Steer,
Drive &
Trailer
GR O
2T
7"
28
4515HA
Drive &
Trailer
Axles
D
D
Q
Q
D
8"
D
E
S
A welded pin must be
present. The rails narrow.
 Shoe Width
8"
→
Friction Material
Standards
Institute (FMSI)
Number
Shoe
Width
Drive &
Trailer
Axles
D
E
Q
Rockwell/Meritor
RE
GR O
2R
8 ⅝" 4711Q(R)
32
Circular Cam-End Style
RE
GR O
2R
28
8 ⅝"
4551P
RE
GR O
2T
32
15"
16½"
16½"
Drive &
Trailer
Axles
Drive &
Trailer
Axles
Drive &
Trailer
Axles
Drive &
Trailer
Axles
Drive &
Trailer
Axles
E
D
Only centered webs are
acceptable.
D
Q
Q
D
Q
D
Circular cam-end style.
Only centered webs are
acceptable.
P
Protect the Value of Your
Brake Shoes During Shipment
ter Brake Drum
e
m
a
i
s
"D
¼
2
1
Type of Shoe Featured:
Industry Name/
Special Notes
RE
GRO
SHOWN
HERE FOR
EACH
SHOE
Pallets
• The Bendix-recommended pallet size is 40" x 48".
• Do not ship oversized pallets, they often break in transit.
• Only use pallets in good condition made of dense hardwood
that is able to safely support the weight of the shipment.
Corrugated Carboard
• Pallets should have a layer of corrugated cardboard
placed on the deck before the shoes are loaded.
Core Group
Stacking the Shoes
• Do not return shoes in their original boxes.
• Do not stack more than 100 shoes per (40" x 48") pallet.
Bendix/Eaton
Cover the Shoes
RE
Number of Rivets
GR O
UP
• typical shape/holes,
• number of rivets,
• drum size,
• number of anchor pins,
• axles where the shoe is
typically used.
7"
→
Drive &
Trailer
Axles
16½"
ter Brake Drums
e
m
a
i
D
16 ½"
meter Brake Drums
a
i
D
"
15
8⅝"
8⅝"
→
16½"
Pressed-in pin
must be present.
8 ⅝" 4710Q(R)
32
32
16½"
UP
Then use any of:
•
anchor-end style,
7½"
→
2P
2R
15"
CO
5"
6"
→
→
5½"
→
GR O
CO
Pressed-in pin
must be present.
8 ⅝" 4551Q(R)
20
CO
CO
Steer
Axles
Only
2T
RE
GR O
UP
Drive &
Trailer
Axles
4674E
GR O
4718Q(R)
RE
UP
15"
8 ⅝"
RE
8"
32
UP
32
2R
Rockwell/Meritor
UP
2R
Rockwell/Meritor
UP
8 ⅝" 4717E2(II)
GR O
88"
/8"
Bendix/Eaton
R
RE
5
E
E GR O
47X8
Rockwell/Meritor
CO
X
CO
Very similar to 4707Q(R) rivets are closer to the rails.
CO
D
20
Drive &
Trailer
Axles
E
28
Drive &
Trailer
Axles
CO
2P
Trailer
Axles
Only
D
2T
16½"
GR O
16½"
Pressed-in pin
must be present.
GR O
16½"
CO
CO
7½" 4692FCII
RE
UP
UP
8
/
8"
8⅝"
5
RE
Bendix/Eaton
12¼"
32
CO
CO
RE
Drive &
Trailer
Axles
Bendix/Eaton
2R
E
UP
CO
Q
12¼"
G
RE R O
A pressed-in pin must be
present here.
Non-typical table shape.
Rockwell/Meritor
Approx.
1½ inch
dia. 16½"
CO
CO
CO
Very similar to 4707Q(R) rivets are closer to the rails.
Bendix/Eaton
E
UP
32
S
2¾ in.
UP
2P
P
CO
CO
inc
3½
4i
GR O
|
|2¼ "
A pressed-in pin must be
present here.
UP
4708Q
|
E
n.
32
|2¼ i
2P
S
Rockwell/Meritor
7"
GR O
Reinforcement
Bendix/Eaton
Circular Cam-End Style.
4" wide shoe →
A pressed-in pin must be
present here.
UP
RE
4515X3
RE
Drive &
Trailer
Axles
D
S
 High Volume Shoe 
1 inch
dia. 16½"
Q
8
/
8"
7 ½"
4726E2(II)
7"
2¾ in.
UP
4591S
32
|
2Q
Fruehauf®
E
n.
4515Q(R)
GR O
A pressed-in pin must be
present here.
Non-typical table shape.
UP
7"
28
RE
UP
2W
 High Volume Shoe 
|
GR O
UP
4707Q(R)
RE
E
S
|2¼ i
nc
he
he
s
s
16½"
in.
Rockwell/
Meritor
 High Volume Shoe 
5
←
Steer &
Trailer
Axles
Closer
15"
E
Welded pin must be
present. The rails narrow.
Circular Cam-End Style
S
14
4524QM
RE
16½"
|1¾
S
E
Very similar to 4515Q(R) and 4515X3, but the rivets
are further from the rails.
8 ⅝"
5"
16
RE
8
/
8"
5½"
Rockwell/Meritor
CO
2R
Drive &
Trailer
Axles
D
2P
UP
4311EHM
3⅜ in.
7½"
GR O
Bendix/Eaton
16½"
D
4524Q(R)
RE
CO
CO
CO
R
A pressed-in pin must be present
here. Similar – except for the
drum size – to 4725E2(II).
7"
28
Welded pin must be
present. The rails narrow.
7"
Rockwell/Meritor
Bendix/Eaton
E GR O
UP
2P
Drive &
Trailer
Axles
Rockwell/
Meritor
5"
Bendix/Eaton
GR O
Q
5
UP
E
UP
87"
/8"
16
Q
16½"
5
E
UP
D
5½" 4536FCII
UP
A welded pin must be
present. The rails narrow.
Bendix/Eaton
S
D
Steer &
Trailer
Axles
4716E2(II)
Dual web.
D
Bendix/Eaton
CO
2R
Compare rivet locations with
4524Q(R) and 4524QM.
6"
14
Q
12
CO
GR O
Steer &
Trailer
Axles
RE
2R
UP
86"
/8"
4661FCII
CO
CO
CO
4720Q(R)
RE
UP
UP
2R
P
UP
R
5
4311E
5"
Bendix/Eaton
E GR O
E
Single web.
D
GR O
Rockwell/Meritor
Further
Q
Circular cam-end style.
Single web.
D
UP
E
16½"
7"
16
RE
16½"
D
Dual web.
S
UP
5"
Bendix/Eaton
D
E
UP
Non-typical drum size.
4317E
D
CO
2R
A pressed-in pin
must be present.
Steer &
Trailer
Axles
6"
Steer
Axles
Only
CO
CO
CO
R
15"
D
Steer
Axles
Only
Trailer
Axles
Only
16
16
Steer
Axles
Only
Steer &
Trailer
Axles
2R
2R
Steer
Axles
Only
E GR O
UP
4703Q(R)
4702Q(R)
Steer
Axles
Only
Steer &
Trailer
Axles
UP
5"
4"
14
Steer
Axles
Only
16½"
GR O
2R
15"
Rockwell/Meritor
RE
1308Q(R)
GR O
Bendix/Eaton
4719E2(II)
Rockwell/Meritor
4"
14
RE
15"
16½"
E
2T
GR O
15"
16½"
S
1308P
RE
15"
UP
5
5"
20
4"
16
GR O
16½"
E
UP
2P
The rails narrow. A welded
pin must be present.
S
85"
/8"
4223E
UP
5"
R
2R
RE
15"
Bendix/Eaton
E GR O
4729E2
CO
Bendix/Eaton
4"
20
CO
E
2R
CO
S
CO
CO
2¾ in.
Steer
Axles
Only
4693HA
CO
2 in.
4"
GR O
UP
15"
D
ID by:
14
RE
Rockwell/Meritor
UP
2P
GR O
RE
Rockwell®/Meritor®
UP
5
1308E
GR O
Circular Cam-End Style
UP
14
RE
Bendix/Eaton
UP
84"
/8"
4"
GR O
2R
Bendix/Eaton
Bendix®/Eaton®
UP
1443E
RE
UP
4"
 High Volume Shoe 
CO
Bendix®/
Eaton®
BRAKE SHOE CORES ACCEPTED BY BENDIX
• Pallets should have at least one layer of corrugated cardboard placed on the
top of the pallet BEFORE the stretch film and banding is applied.
• Do not use plywood or pallets on top.
Stretch Film Wrap
Drum Size
(12¼, 15" or 16.5")
Typical Shape
• Attacth one copy of the Core Return Memo (CRM) under the stretch film, and
a second copy on the outside.
• The stretch film must be secured to the pallet.
• Use at least eight turns of stretch film.
Banding
After the stretch film, all pallets should have:
• at least four bands to secure the product to the skid.
• at least two bands per side (length/width).
Anchor Pin End:
Brake Uses Dual ( D )
or Single ( S ) Anchor Pin
S-Cam
End
Anchor
Pin End
The rivets are closer to the
edge than 1443EX
Shipper information
E
Typical Axles
Where Used
• Each piece of freight should be clearly marked with the shipper address,
consignee address, and pro number. The second CRM should also be
placed on the outside.
Shipping
• See the core routing map at www.bendix.biz.
www.foundationbrakes.com
1-866-610-9709
BW7547 © 2014 Bendix Spicer Foundation Brake LLC • 09/14 • All Rights Reserved
Anchor Style:
Further Information, Including
Distinctive Features
E - Bendix®/Eaton® P - Closed-End
Q - Rockwell®/Meritor® X - Fruehauf®
Any references on this wallchart to company names or trademarks are
solely for identification and cross reference purposes. Bendix Spicer
Foundation Brake LLC does not represent any parts shown as products
manufactured or remanufactured by the companies so named herein.