1 Section 1

Material Safety Data Sheet
According to EC-Regulation No. 1907/2006
Version 3.0.1. 2014
flexible embalming concept
Section 1: Product and Company Information
Productcode
A101 / A102 / A103
Product name
AnubiFiX Substance A
AnubiFiX Substance B
AnubiFiX Substance C
Product description
Pre-embalming solution for intravenous rinsing of the deceased body
where after a full embalming keeps a human/animal specimen with
almost normal tissue feel and joint mobility.
Contact information
Company:
Visiting:
Production:
AnubiFiX BV
Beekpoldersingel 17
2807 KW Gouda
The Netherlands
Erasmus Medical Center
‘s-Gravendijkwal 230
3000 CA Rotterdam
The Netherlands
INstruchemie BV
Zwet 26
9932 AB Delfzijl
The Netherlands
Section 2: Hazards Identification
This product does not contain hazardous ingredients according to Directive 67/548/EEC.
Section 3: Composition and Information on Ingredients
Mixtures
Specific composition as a result of applicable regulations is not necessary to show.
Section 4: First Aid Measures
In Case of Contact with Eyes: Flush thoroughly with water and contact a physician
In Case of Accidental Swallowing: Rinse the mouth with fresh water, provided the person is
conscious, contact a physician.
In Case of Inhalation Remove to fresh air. Give oxygen if breathing becomes difficult, contact a
physician.
In Case of Contact with Skin: Wash the affected area with soap and copious amounts of water.
Should irritation occur, contact a physician.
1 Section 5: Fire-Fighting Measures
Non-flammable, no specific measurements needed
Section 6 - Accidental Release Measures
Methods for Cleaning Spills
Wear chemical-resistant gloves and safety-goggles. Wipe up
spilled product using tissue-towels. Place waste in closed
containers for disposal.
Section 7 - Handling and Storage
Handling
Avoid contact with eyes, skin, mucous membranes, and
clothing.
Storage
Keep tightly closed. Protect from light.
AnubiFiX Substance A
AnubiFiX Substance B
AnubiFiX Substance C
Store at room temperature
Store at room temperature
Store at 2 - 8 degrees Celsius to obtain max conservation time
Section 8 - Personal Protection and Exposure Control Information
Eye Protection
Protective Gloves
Respiratory Protection
Ventilation
Other Protection Equipment
Safety glasses or goggles
Chemical-resistant gloves
Not required
Not required
Safety shower and eye bath
As a general hygiene measure, wash hands thoroughly after handling
Section 9 - Physical and Chemical Properties
Physical State
Liquid
Appearance
AnubiFiX Substance A
AnubiFiX Substance B
AnubiFiX Substance C
1500cc HDPE container, clear, pink solution
1000cc HDPE container, clear
60cc HDPE container, clear, yellow ocher solution
pH 3.5 - 7.4
Flash Point
Flammability
Oxidizing Properties
Explosive Properties
Vapor Pressure
N/A
N/A
N/A
N/A
N/A
2 Section 10 - Chemical Stability and Reactivity
Product is stable. Hazardous polymerization will not occur.
On the product label is printed the expiration date and storage temperatures.
Section 11 - Toxicological Data
To the best of our knowledge, the chemical, physical, toxicological properties have not been
thoroughly investigated. May cause skin irritation. May be harmful if absorbed through the skin.
May cause eye irritation. May be harmful if inhaled swallowed. Material may be irritating to mucous
membranes upper respiratory tract.
Section 12 - Ecological Information
No data available.
Do not discharge into open water.
Section 13 – Disposal considerations
Section 14 - Transport Information
This product is not subject to any transport regulations.
Section 15 - Classification and Regulatory Information
In accordance to current EC-Regulations this product is exempt from specific labeling
requirements.
Section 16 - Other Information / Disclaimer
The information above is believed to be accurate and represents the best information currently
available to us. However, we make no warranty of merchantability or any other warranty, express or
implied, with to such information, and we assume no liability resulting from its use. Users should
make their own investigations to determine the suitability of the information for their particular
purposes. In no way shall the company be liable for any claims, losses, or damages of any third
party or for lost profits or any special, indirect, incidental, consequential or exemplary damages,
howsoever arising, even if the company has been advised of the possibility of such damages.
--- End of MSDS ---
3