MediaCenter Quick Reference Guide
Front Panel and Status LEDs
Power Indicator
Air Vents
Status LEDs
Unused
1
3. Built-in Ethernet
Black
No ports connected
Blue
(Solid) At least one connected port not
assigned an IP address
(Blink) Hardware or software fault
1. File System
Black
No root file system
Green
(Solid) File system in process of coming up
Blue
(Solid) Root file system started, read only
(Blink) Root file system present, halted
White
(Solid) Root file system started, read-write
(Blink) Root file system present, unable
to start
2. RAID
Black
Green
Blue
White
2
3
Unused
Unused
White
(Solid) At least one port linked at 1 Gb
(Blink) At least one port linked at less
than 1 Gb
No RAID sets or root file system unavailable
(Solid) Rebuild(s) in proces
(Blink) One or more RAID sets unprotected
(Blink) RAID sets present, no root file system
(Solid) All RAID sets protected (non-compromised)
(Blink) Root file system not viable to start
MediaCenter Disk Array (Bezel Removed)
3
2
1
Disk
Drive
LEDs
2
1
0
6
5
4
5
4
3
9
8
7
8
7
6
Blue (activity)
Solid: drive is powered on
Off: no power is provided to the drive
Blinking: drive activity
12
11
10
11
10
9
Red (status)
Solid: drive is not being used by the unit
Blinking: drive has failed or is being winked
Two rapid blinks then pause: drive is
being rebuilt
Off: drive state is normal
Harmonic Technical Support: +888 673 4896 (Americas), +65 6542 0050 (Asia Pacific), + 44 1252 555 450 (EMEA),
+7 495 926 4608 (Russia, CIS), +81 3 5565 6737 (Japan), +86 10 8391 3313 (China, mainland)
28-0333 Rev. E
File System Configurations
Model #
# Drives
RAID Set
Capacity per
Drive
Storage
Capacity
MCP-2200A-C4H
12 SAS
2 x (4+2)
4 TB
32 TB
MCP-2200-C4H
12 SAS
2 x (4+2)
4 TB
32 TB
MCP-2200-C2H
12 SATA
2 x (4+2)
2 TB
16 TB
MCP-2200-C4S
12 SSD
2 x (5+1)
480 GB
4.8 TB
MCP-2200-64S
6 SSD
1 x (5+1)
480 GB
2.4 TB
Note: The MCP-2200A-C4H
includes an additional
4 x 1 GbE NIC card.
MCP-2200A Rear Panel
2
3
5
4
6
1
MIP
8/9
MIP
3
MIP
7
MIP
2
MIP
6
MIP
1
MIP
5
MIP
0
MIP
4
RST
ALT
BOOT
PWR
LTC
IN
ETH
0/1
13
MIP
8/9
MIP
3
MIP
7
MIP
2
MIP
6
MIP
1
MIP
5
MIP
0
MIP
4
12
7
RST
ALT
BOOT
PWR
LTC
IN
8
10
11
9
ETH
0/1
1.
2.
3.
4.
5.
Redundant Power Supply
Power Supply Release
Power Supply LED
Power Supply Unit Handle
Air Vents
6. MediaPort/ChannelPort or Ethernet Ports (MIP8/9, or ETH2/3)
7. MediaPort/ChannelPort Ethernet Array (from bottom
to top): MIP0-MIP3, and MIP4-MIP7
8. Reset Button
9. Alt/Boot Button
Harmonic Technical Support: +888 673 4896 (Americas), +65 6542 0050 (Asia Pacific), + 44 1252 555 450 (EMEA),
+7 495 926 4608 (Russia, CIS), +81 3 5565 6737 (Japan), +86 10 8391 3313 (China, mainland)
10. Power Button/LED
11. LTC IN
12. Ethernet Ports and LEDs
ETH0: left, ETH1: right
13. For Service Use Only
28-0333 Rev. E
MCP-2200 Rear Panel
2
3
5
4
6
1
RST
ALT
BOOT
MIP
3
PWR
MIP
2
MIP
4/5
LTC
IN
MIP
1
MIP
0
ETH
0/1
13
MIP
3
MIP
2
MIP
4/5
12
7
RST
ALT
BOOT
PWR
LTC
IN
MIP
1
8
10
11
9
MIP
0
ETH
0/1
1.
2.
3.
4.
5.
Redundant Power Supply
Power Supply Release
Power Supply LED
Power Supply Unit Handle
Air Vents
6. MediaPort/ChannelPort or
Ethernet Ports (MIP4/5, or ETH2/3)
7. MediaPort/ChannelPort Ethernet Array
and LEDs (MIP0: bottom, MIP3: top)
8. Reset Button
Harmonic Technical Support: +888 673 4896 (Americas), +65 6542 0050 (Asia Pacific), + 44 1252 555 450 (EMEA),
+7 495 926 4608 (Russia, CIS), +81 3 5565 6737 (Japan), +86 10 8391 3313 (China, mainland)
9. Alt/Boot Button
10. Power Button/LED
11. LTC IN
12. Ethernet Ports and LEDs
ETH0: left, ETH1: right
13. For Service Use Only
28-0333 Rev. E
Rear Panel LEDs
MediaPort/ChannelPort or Ethernet Port LEDs
(#6 and #12 on MIP-2200A and MIP-2200 diagrams)
Left (Activity)
Yellow, blink
Yellow, blink
Dark (off)
Right (Link)
Status
Amber, solid 1 Gbps link
Green, solid 100 Mbps link
Dark (off)
Inactive
MediaPort/ChannelPort Ethernet Array LEDs
(#7 in MIP-2200A and MIP-2200 diagrams)
Top (Activity/Link)
Green, blink
Green, blink
Green, blink
Dark (off)
Bottom
Yellow, solid
Green, solid
Dark (off)
Dark (off)
Status
1000 Mbps
100 Mbps
10 Mbps
Inactive
Power Supply LED
Off - module is not powered,
or is faulty
Green, blinking - abnormal state
Green, solid - normal state
Amber, solid - normal power off state
(standby power only)
Amber, blinking - abnormal state
Power Button LED
RST
ALT
BOOT
PWR
LTC
IN
Off - unit is off
Blue, blinking - unit is transitioning
on or off
Blue, solid - unit is on
Harmonic Technical Support: +888 673 4896 (Americas), +65 6542 0050 (Asia Pacific), + 44 1252 555 450 (EMEA),
+7 495 926 4608 (Russia, CIS), +81 3 5565 6737 (Japan), +86 10 8391 3313 (China, mainland)
28-0333 Rev. E