2X
WALL PLUG
1X
FULCRUM PENDANT
1X
CEILING ROSE
2X
SCREW
1X
E26 LED
BULB
- WE SUGGEST THAT THE FULCRUM LIGHT SHOULD BE INSTALLED BY A
QUALIFIED ELECTRICIAN
- ENSURE POWER SUPPLY IS DISCONNECTED PRIOR TO INSTALLATION
- THIS PRODUCT IS FOR INTERIOR USE ONLY AND SHOULD BE INSTALLED IN A
DRY ENVIRONMENT
- WHEN SWITCHED ON, THE FULCRM LIGHT MAY BECOME HOT
110-130V
50-60HZ
FULCRUM PENDANT
E26
LAMP
HOLDER
- ONLY ATTEMPT TO CLEAN WHEN FULCRUM LIGHT IS SWITCHED OFF
- PLEASE ALLOW A SUITABLE COOLING PERIOD BEFORE ATTEMPTING TO CLEAN
THE FULCRUM LIGHT OR REPLACE THE BULB
- ONLY USE A NON-ABRASIVE , SOFT, DRY CLOTH WHEN CLEANING THE FULCRUM
LIGHT
ASSEMBLY
1.
3.
4.
5A.
1. SEPERATE THE BACK PLATE FROM THE CEILING ROSE COVER BY
UNSCREWING THE END NUT
2. TERMINATE ALL WIRES
3. MOUNT THE BACK PLATE USING SUITABLE FIXINGS. ALWAYS USE
THE APPROPRIATE FIXING FOR THE CEILING MATERIAL YOU
ARE FIXING TO
4. THREAD THE POWER CABLE THROUGH THE END NUT AND THE
CEILING ROSE COVER
5B.
5A. LOOSEN THE SCREWS ON THE CORD RESTRAINT
5B. THREAD THE POWER CABLE THROUGH THE CORD RESTRAINT
TO THE CORRECT DROP HEIGHT REQUIRED AND TIGHTEN
SCREWS ON CORD RESTRAINT
6. CONNECT EACH WIRE TO ITS CORRECT TERMINAL IN THE
PROVIDED JUNCTION BOX.
7. ATTACH THE CEILING ROSE COVER BY THREADING THE END
NUT INTO THE BACK PLATE
8. FIT BULB INTO LAMP HOLDER. A 6.5 WATT LED MINI GLOBE IS
SUPPLIED. THIS LAMP IS RECOMMENDED BY LEE BROOM TO
ENSURE THE BEST SHAPE AND COLOUR TEMPERATURE FOR
YOUR FULCRUM PENDANT
DROP HEIGHT
6.
7.