BRINGING QUALITY TO THE SURFACE
BRINGING QUALITY TO THE SURFACE
BrIngIng QUAlITy To THe sUrfACe
QUICTAC
(C65BP3)
COLDCOTE
QUICTAC
POLYMER MODIFIED EMULSION
Coldcote modIfIed
JT B TMPX TFUUJOHemUlsIon
CJUVNJOPVT CJOEFS UIBU IBT CFFO EFWFMPQFE GPS VTF JO EFMBZFE
Polymer
TFUNBDBEBN
A polymer
modified, quick setting, tack-coat emulsion.
A polymer modified, quick setting, tack-coat emulsion.
PrInCIPAl
PRINCIPAL APPlICATIons
APPLICATIONS
Quictac is a rapid breaking polymer modified emulsion used for the bonding of thin layer surface
courses (thin layer asphalt), porous asphalt, hot rolled asphalt (HRA) and stone mastic asphalt (SMA).
It can also be used for the bonding of bituminous layers to cement bound bases, asphalt concrete
and macadam layers in road construction works.
AdvAnTAges
ADVANTAGES of
OF UsIng
USING QUICTAC
•
• Itcanbetraffickedconsiderablyearlierthan
canIt be trafficked considerably earlier than
conventional bonding coats.
•
• Itbecomestack-freein10minutes.
becomes
It
tack-free in 10 minutes.
•
Itcontainsheavydutypolymerswhichprovidea
• contains
It
heavy duty polymers which provide a
stronger adhesive bond between construction layers.
•
• Itissafetouse,environmentallyfriendlyandsolventfree.
is safe
It to use, environmentally friendly and solvent free.
sPeCIfICATIons
SPECIFICATIONS
ItcomplieswithISEN13808andTheNationalRoads
It complies with IS EN 13808 and The National Roads
Authority Binder Specifications for the requirements as
bond coats for porous asphalt and thin layer surface courses.
ADVANTAGES OF COLDCOTE
tcomplies
(PPEBEIFTJPOUPBXJEFWBSJFUZPGBHHSFHBUFT
Quictac
with The NRA Binder Specifications:
RC 380/13 Table 1.specification
Property
Test method
t
3FTVMUBOUNJYFTDBOCFTUPDLQJMFE
Particle polarity
ISEN1430
Class 2 Positive
t
3FTVMUBOUNJYFTTIPXHPPEXPSLBCJMJUZ
Binder content
ISEN1431
Class 7 ≥ 65
Quictac
is applied at a rate of 0.5 l/m2
t
.JYJOHBOETUPSBHFUFNQFSBUVSFTBSFDPOTJEFSBCMZMPXFS
Breaking value
IS.EN13075-1
Class1TBR
UIBOGPSTUBOEBSECJUVNJOPVTCJOEFST
Penetration of Residual Bitumen
ISEN1426
Class4≤150
Recommended Temperature:
Softening Point of Residual Bitumen
ISEN1427
Class4≥43
Storage
and Spraying 50ºC
Irish Tar & Bitumen Suppliers Specification:
Viscosity @ 25°C 10mm cup Standard Tar Viscometer;
Quictacisappliedatarateofspreadof0.4-0.6l/m2 for normal tack
30-60 seconds 2 for bonding porous asphalt, thin layer asphalt
coatwork;0.7-1.0l/m
orstonemasticasphalt;1.1-1.3l/m2 for cement bound bases.
Recommended Temperature:
StorageandSpraying50ºC
Available
from
Available
from
TarBitumen
& Bitumen
Suppliers,
Alexandra
Road,
Dublin
IrishIrish
Tar &
Suppliers,
Alexandra
Road,
Dublin
1 1
Available from
01 855
/ Fax:
01 855
4262
/& Email:
[email protected]
/ www.irishtar.ie
Tel:Tel:
01 855
51175117
/ Fax:
01 855
4262
/Tar
Email:
[email protected]
/ www.irishtar.ie
Irish
Bitumen
Suppliers, Alexandra
Road, Dublin 1
Tel: 01 855 5117 / Fax: 01 855 4262 / Email: [email protected] / www.irishtar.ie
TarBitumen
& Bitumen
Suppliers
is registered
EN ISO
9001:2008
Quality
Standard
Irish Irish
Tar &
Suppliers
is registered
to IStoENISISO
9001:2000
Quality
Standard
Irish Tar & Bitumen Suppliers is registered to IS EN ISO 9001:2008 Quality Standard