= Qualified and Supported
= Not Functional/Not Supported
= Untested/Not Supported
NOTE: "PR" within a "Not Functional/Not Supported" cell indicates there is an active Problem Report (PR) tracking the progress toward resolution of the issue.
QLogic to QLogic
IBM Cable Support Matrix
Lgth x Gage
Manufacturer P/N
QLogic P/N
QDR QSFP-QSFP Passive CU
.5m x 30awg
CBL1-0600H30-9X
1m x 30awg
CBL1-0600130-9X
3m x 28awg
CBL1-0600328-9X
3m x 28awg
CBL1-0600328-9X
Amphenol 584470001
Amphenol 584470002
Amphenol 584470004
Gore QSN3800-3
QLogic CBL1-0600H30
QLogic CBL1-0600130
QLogic CBL1-0600328
QLogic CBL1-0600328
QDR QSFP-QSFP Active Fiber
3m
CBL2-1000301-3-9X
10m
CBL2-1001001-3-9X
30m
CBL2-1003001-3-9X
Finisar FCBG410QB1C03-QL
Finisar FCBG410QB1C10-QL
Finisar FCBG410QB1C30-QL
QLogic CBL2-1000301-3
QLogic CBL2-1001001-3
QLogic CBL2-1003001-3
Last Update:
IBM P/N
12-Jul-10
12000 Switch - 12000 Switch
Edge to Edge Edge to 24 port Edge to 18
leaf
port leaf
HCA to 12000 Switch
QLE734x to QLE734x to 24 QLE734x to 18
Edge
port leaf
port leaf
QLogic to 3rd Party
Mellanox ConnectX to 12000 Switch
Mellanox ConnectX-2 to 12000 Switch
ConnectX to ConnectX to 24 ConnectX to 18 ConnectX-2 to ConnectX-2 to ConnectX-2 to
Edge
port leaf
port leaf
Edge
24 port leaf
18 port leaf
Switch - Switch
Voltaire
QLogic Switch to QLogic HCA to QLogic Switch
Mellanox Switch Voltaire Switch
to Volatire
Switch
Qualified and Supported: Functionality and interoperability has been qualified by QLogic
Engineering and System Test with QLogic switches and HCAs. QLogic will fully support
customer use of each of the components. Interoperability with other manufacturer’s
switches and/or HCAs have been identified (e.g. device specific, FW, etc.) and will be
supported by QLogic as specified. Support matrix is subject to change and is published on
Not Functional/Not Supported: The cable failed the functionality and interoperability
qualification by QLogic Engineering and System Test and is known not to work with
QLogic switches and HCAs. QLogic will not support customer use of this cable with any
QLogic InfiniBand component. If the cable has an open Problem Report (PR) against it,
engineering resources are being applied to resolve the issue. If no PR exists, then
Untested/Not Supported: Functionality and interoperability has not been attempted by
QLogic Engineering and System Test and it is unknown if the cables will operate with
QLogic switches and HCAs. QLogic will not support customer use of this cable with any
QLogic InfiniBand component.