Get more.
GEOMETRIES
60 x 30 mm staggered
GEOMETRIES
33,333 x 28,868 mm staggered
33,333 x 33,333 mm inline
15
HIGH EFFICIENCY RUN-AROUND SYSTEM
Decentralized use of energy
Efficiency 60 – 85 %
Lower air pressure drop
12
,4
30
14,434 28,868
33,333
,4 0
HEADERS
Steel (painted)
Copper
8,333
FINS
Copper: 0,12 mm
Aluminium: 0,11mm / 0,15 mm /
0,2 mm
Al – Epoxy: 0,11 mm / 0,15 mm /
0,2 mm
AlMg: 0,2 mm
12
CASING
Galvanized steel, Stainless steel
AISI 304 or AISI 316
Aluminium, Copper
33,333
60
HEADERS
Steel (painted)
Copper
16,667
,4
FINS
Copper: 0,12 mm
Aluminium: 0,11 mm / 0,15 mm /
0,2 mm
Al – Epoxy: 0,11 mm / 0,15 mm /
0,2 mm
AlMg: 0,2 mm
FIN FORM
Flat, Sinus, V form
16
FIN FORM
Flat, V form
TUBES
Copper 12 x 0,35 mm (Standard)
Copper 12 x 0,40 mm
Copper 12 x 0,70 mm
15
TUBES
Copper 16 x 0,40 mm (Standard)
Copper 16 x 0,70 mm
33,333
12 mm tube
16,667
16 mm tube
CONNECTIONS
Threaded, Victaulic, Loose Flange, Welded flange....
HEAT EXCHANGER





Project-related heat exchangers
Quality
Highly efficient fin
Short delivery times
Flexibility
MAXIMUM DIMENSIONS


Length: 9.000 mm
Height: 3.000 mm
ACCESSORIES





For duct installation
Isolated Casing
Droplet eliminator
Powder painted casing
Immersion coating of the whole
heat exchanger
KEY EXPLANATION
Frame  Frame size top (30 mm)  Frame
size back (60 mm)  Material  Max coil
depth (190 mm)
Casing material  Fz – Galvanized steel
 Al – Aluminium  S4 – AISI 304  S6 – AISI
316  FP – Galvanized steel with epoxy paint
 Cu – Copper
Header diameter and material
Coil position  V1 right  V2 left
Fin material  Al – Aluminium  Ae – Epoxy pre-painted aluminium
 Cu – Copper  – – – No fins  Am – AlMg 2.5
Tube material  Cu – Copper
Circuitry  28 is number of circuits, in every circuit there are 4 tubes. X26 - 2 represents
number of cooling circuits with DX and CD coils, 6 represents outside capillary diameter.
Number of rows
Finned length in mm
Number of tubes in height
Fin pitch in mm
Fin form  V – V form  S – Sinus  F – Flat  --- No fins
Geometry  3329 – tube geometry 33,333 x 28,868 mm  3333 – tube geometry 33,333 x 33,333 mm  6030 – tube geometry 60 x 30 mm
Tubes  12 – 12 mm  16 – 16 mm
Typ  HW – Water heater  CW – Water cooler  ST – Steam heater  DX – Direct expansion coil  CD – Condenser
Korenova cesta 5
1241 Kamnik, Slovenia
T: +386 59 04 56 10
F: +386 59 04 56 11
E: [email protected]
www.tps-imp.si