RIGIBELT
Mechanical non-magnetic actuator
LINEAR TELESCOPIC NON-MAGNETIC
ACTUATOR
Horizontal and vertical transfer
SERAPID is the creator of rigid chain technology and designs
and has been manufacturing telescopic mechanical jacks
meeting the requirements of professionals for over 40
years for the horizontal and vertical movement of heavy
loads.
RigiBelt is a mechanical amagnetic actuator It is composed
of two flexible belts that are embedded into each other
like a zipper to form a rigid push and pull column.
From the medical and pharmaceutical sector, to the
furnishing and construction industry, from logistics to the
aviation industry, RigiBelt is a flexible product that adapts
to all environments.
The RigiBelt belts were designed using reinforced plastic
and are therefore totally amagnetic. They can be stored in
different ways and in a highly compact fashion depending
on the available space. The belt transfer movement is joltfree in a drive case.
The standard RigiBelt actuator can be adapted to your
specific application needs. Don’t hesitate to get in touch
to discuss your projects.
Interfaces
SERAPID designed 2 types of links attachment between
your application and the extremity of the belts. They allow
an attachment on the top or on the side.
These standards interfaces are also non-magnetic and
very resistant.
Option 1
SPECIFICATIONS
Entirely non-magnetic
Light weighted
Strong and flexible belts
Horizontal and vertical transfer
Stroke: from 100 mm to many meters
with or without guide
Max. static load of the belt: 500 kg*
Elongation** : 3 mm / 100 kg
Option 2
Compression** : 1 mm / 100 kg
Weight of a belt: 700 g/m
Section of a belt: 25 mm x 28 mm
* Maximum value without safety coefficient for R&D
application.
Other push-pull interfaces can be designed according to
your applications and your needs (upon request only).
** **at max. load. This information is based on static
testing performed by an independent laboratory. Dynamic
capacity and life cycle depend on the drive design.
Drive housing
TECHNICAL CHARACTERISTICS OF THE RIGIBELT DRIVE:
The RigiBelt drive is compact, handly and very simple to
integrate.
Capacity : Up to 1 000 N (see graph below)
The RigiBelt Drive - is also entirely non-magnetic.
Using materials such as aluminum, POM and stainless
material, the RigiBelt system can be integrated in many
environments (ex: medical, food, white rooms...).
Speed : 20 à 300 mm/s
Push/pull system
No maintenance
Magazine
C
61
89
4xM4 4xM4
61
2
2
3
3
4
10
10
30
30
35°
R30 R30
(*)
15
74
74
4xM5 4xM5
89
1
12
15
89
1
12
15
41
41
25
+0.3
+0.1
+0.3
25
+0.1
12g6
12g6
13
4
4
13
35°
45°
5
4x M84x
onM8
both
onside
both side
45°
5
4
12g6
D
4
12g6
OutputOutput
shaft Ashaft A
Opposite
Opposite
side output
side output
shaft Bshaft B
E
4
Front link
Front
(*):link (*):
- Option
- Option
1: 10 mm
1: 10dead
mm stroke
dead stroke
- Option
- Option
2: 50 mm
2: 50dead
mm stroke
dead stroke
28.8 28.8
D
28
25
(*)
C
5
5
6
6
7
7
28
25
89
B
10
Stroke
B
2x inserts
2x inserts
M6 10
M6
Stroke
A
The magazine is entirely non-magnetic. The belt can
either be wound on either side of the housing or out
rectilinearly.
R25 R25
15
A
8
8
The drive can be operated by any kind of motor (AC or DC)
according customers specifications.
E
19.6 19.6
73
73
=90= =90=
=114==114=
F
POUR
POUR
INFORMATION
INFORMATION
/ FOR
/F
F
Lifting loads
Description
Description
Rev.
Modifié par
Modifié par
Rev.
Modified
by
Modified by
Date de modif.:
Date de modif.:
Dessiné par
Dessiné par
DesignedDesigned
by
by
Date de création:
Date de création:
G
G
Stroke (mm)
Date :
Date :
1000
- Metric threads
- Metric to
threads
triangular
to triangular
threads 6H/6g
threads
quality
6H/6g quality
are according
are according
to NF E 03-053
to NF E 03-053
- Positional
- Positional
tolerances
tolerances
:
:
453, route
453, de
route
dieppe
de dieppe
- B.P 15
-B
-> Holes->
and
Holes
tapped
and: tapped
±0,3 : ±0,3
Ce document
Ce document
est la propriété
est la propriété
de SERAPID,
de SERAPID,
il ne peut
il ne
être
peu
re
-> Drilled->holes
Drilled
: ±0,1
holes : ±0,1
-> Dowel->holes:
Dowel
±0,02
holes: ±0,02
This document
This document
is the property
is the property
of SERAPID,
of SERAPID,
to reproduce
to reproduce
and/or
- Relief of
- Relief
sharp of
angles
sharp: angles
Ch. 0,2:to
Ch.
0,50,2
at to
45°
0,5 at 45°
Matière / Material
Matière /: Material
Euronorm
: Euronorm
/ DIN / AISI
/ DIN / AISIMasse / Weight
Masse(Kg):
/ Weight (Kg):
- Clearance
- Clearance
holes holes
http://www.serapid.com
http://www.serapid.com
[email protected]
[email protected]
- General- General
tolerances
tolerances
are according
are according
to NF ENto22768-mK
NF EN 22768-mK
700
Sprocket
Sprocket
pitch
pitch
diameter:
diameter:
Ø26mm
Ø26mm
Efficiency:
Efficiency:
0.80.8600
1 shaft
1 shaft
rotation
rotation
= 500
81.64mm
= 81.64mm
linear
linear
at belt
at belt
H
Push
Push
force
force
200N
200N
=
= Output
torque
torque
3.25Nm
3.25Nm
400Output
8
Date
NOTE : NOTE :
UNLESSUNLESS
OTHERWISE
OTHERWISE
INDICATED
INDICATED
:
:
800
8
Date
Verifé parVerifé par
Checked Checked
by
by
1100
900
H
Verifé parVerifé par
Checked Checked
by
by
300
7
200
Reference
Reference ArticleArticle
number
number Quantity
Quantity
Drive Housing
Drive Housing
SER-000RG-C001-0
SER-000RG-C001-0 1
1
Belt Belt
StrokeStroke
SER-000RG-R401-0
SER-000RG-R401-0
Front link
Front link
IND-01010-2011-0
IND-01010-2011-0
OptionOption
1
1
Storage
Storage
OptionOption
2
2
-
Volume / Volume /(cm³)
Volume
: (cm
NOTA : NOTA :
Titre / TitleTitre
: / Title :
SAUF INDICATIONS
SAUF INDICATIONS
CONTRAIRES
CONTRAIRES
:
:
- Tolérances
- Tolérances
généralesgénérales
suivant Norme
suivantNF
Norme
EN 22768-mK
NF EN 22768-mK
- Filetages
- Filetages
métriquesmétriques
à filets triangulaires
à filets triangulaires
qualité 6H/6g
qualité 6H/6g
RIGIBELT
RIGIBELT
standard
standard
productproduct
suivant Norme
suivantNF
Norme
E 03-053
NF E 03-053
- Tolérances
- Tolérances
de positionnement
de positionnement
:
:
N° de Plan
N°/ de
Drawing's
Plan / Drawing's
number : num
-> des Trous
-> des
Lisses
Trous
ouLisses
Taraudés
ou Taraudés
: ±0,3 : ±0,3
Préfixe ERP/Préfixe ERP/
Code archivage/
Code archivage/
ERP Prefix ERP Prefix
Code
archive
Code
archive
-> des Trous
-> des
Fraisurés
Trous Fraisurés
: ±0,1 : ±0,1
-> des Trous
-> des
deTrous
Goupilles
de Goupilles
: ±0,02 : ±0,02
- Casser -les
Casser
angles
lesvifs
angles
: Ch. vifs
0,2 :àCh.
0,5 0,2
à 45°
à 0,5 à 45°
- Trous débouchants
- Trous débouchants
Produit
Produit
standard
standard
RIGIBEL
RIGIB
CD2CD2
7
2
100
0
0
100
200
300
400
500
Load (N)
600
700
800
900
1000
1100
2
SERAPID France
SERAPID Deutschland GmbH
SERAPID Ltd
SERAPID INC.
FRANCE
GERMANY
UNITED KINGDOM
USA
+33 (0)2 32 06 35 60
[email protected]
+49 (0)7931 96 47-0
[email protected]
+44 (0)1359 233335
[email protected]
+1 586 274 0774
[email protected]
ZI Louis Delaporte- Zone Bleue- Voie F
F-76370 Rouxmesnil-Bouteilles
SERAPID China Office |
Postfach 1711
D-97967 Bad Mergentheim
Elm Farm Park, Great Green, Thurston
Bury St Edmunds | IP31 3SH
34100 Mound Rd.
Sterling Heights MI 48310-6612
+86 185 1215 0303 | [email protected] • SERAPID Italy Office |
+39 01 18 00 35 44 | [email protected]
SERAPID Mexico Office / LATAM |
+52 1 442 4 900 701 | [email protected]
SERAPID | REF PL006EN | V3 | 10 2016 | The trademarks and product names used are the property of their owners.
We decline all liability for errors and omissions | We reserve the right to modify our existing products.
www.serapid.com