Poles Orientation
C
D
C
B
D
B
Hand Hole
Hand Hole
A
A
Pole Selection Procedure
The
The
The
The
side
side
side
side
of
of
of
of
the pole with the hand hole is side A.
the pole 90 degrees counterclockwise from the hand hole is side B. (right)
the pole 180 degrees counterclockwise from the hand hole is side C. (opposite)
the pole 270 degrees counterclockwise (or 90 degrees clockwise) from the hand hole is side D. (left)
Ordering Information for Horizontal Arm Brackets and Festoon Outlets L/E
H1-18S
H1-18A
steel bracket, to be used with steel poles
aluminum bracket, to be used with aluminum poles
length of horizontal arm bracket, inches
length of horizontal arm bracket, inches
number of horizontal arm brackets per pole
number of horizontal arm brackets per pole
The orientation from the hand hole and location from the pole base must be specified when ordering the pole. The orientation from the
hand hole is designated by the pole sides A, B, C or D. The location on the pole shaft is designated by the distance from the pole base.
See the following examples:
1. SSS 25 5G with one shoebox and two floodlights on horizontal arm brackets.
90 degrees from the shoebox, and 12 feet above the base.
Order as: SSS 25 5G DM19 H2-18S @ AC12
The floodlights are to be 180 degrees from each other,
2. RTA 30 8G with two shoeboxes at 180 degrees, and one floodlight on a horizontal arm bracket. The floodlight is to be opposite of the
hand hole and five feet from the top of the pole.
Order as: RTA 30 8G DM28 H1-18A @ C25
3. SSA 16 4C with one KVF post top luminaire, and a festoon outlet less electrical 90 degrees left of the hand hole and 4 feet from the top.
Order as: SSA 16 4C PT FLD @ D12
SQUARE POLE DRILL MOUNTING OPTIONS
C
D
B
A
DM19
DM28
DM29
DM39
DM49
ROUND POLE DRILL MOUNTING OPTIONS
C
D
B
A
DM19
DM28
DM29
DM32
DM49
Sheet#: Pole-Orientation
PL-110
Rev. 3/02 Pole-Orinetation.P65