COOLANT V RANGE
ANTIFREEZE/ANTIBOIL
DEFINITION
(Code: 6030)
COOLANT ANTIFREEZE/ANTIBOIL is a cost effective mono ethylene glycol based product containing inhibitors to
protect cooling systems from corrosion and scale formation. The product when mixed with water is fluorescent
green. The corrosion inhibitor is the conventional type which is common with most large fleet approved products.
COOLANT ANTIFREEZE/ANTIBOIL is for use in all petrol and LPG engines. Formulated for vehicles fitted with air
conditioning.
Use this product wherever the following specifications are called for:
> AS2108-84
> AS/NZS 2108-2004 TYPE A
> FORD ESE-M97B44-4
> FORD ESR-FM7C35-C
> GENERAL MOTORS GM-1825M
> GENERAL MOTORS GM-6043
> CUMMINS 92T8-9
> DETROIT DIESEL 7SE298
> NISSAN NES 5059 LLC
PACKAGE SIZE
205 Litre, 60 Litre, 20 Litre
TYPICAL MAIN CHARACTERISTICS
SPECIFIC GRAVITY 1.12
COLOUR DARK GREEN
ODOUR SLIGHT
PH (50% Water) 9.75 – 10.5
ETHYLENE GLYCOL 90%
50vlv% Solution
30vlv% Solution
FREEZING POINT
-34 C
-15 C
BOILING POINT
132 C
125 C
DIRECTIONS FOR USE
50/50 mix AFAB and Water
COOLANT ANTIFREEZE/ANTIBOIL is not compatible with organo acid types.



Materials Safety Data Sheet for this product can be obtained by visiting TriTech Lubricants Website www.tritechlubricants.com
All Packages should be stored under cover to avoid water contamination and fading. Products should not be stored over 60°C
Due to continual product research and development, the information contained herein is subject to formulation change without notice. Values stated are
average values only and may vary due to manufacturing tolerances
TRITECH LUBRICANTS
170 Williams Road, Dandenong South
VIC 3175
PHONE: (03) 9791 7662
FAX: (03) 9791 7570
EMAIL: [email protected]
COOLANT V RANGE
ANTIFREEZE/ANTIBOIL
PROPERTIES
Corrosion Protection: Glassware Corrosion Test- ASTM D 1384
Metal Discs
AS/NZS 2108.1
ASTM D3306
AF/AB1060 wt.
Wt. Loss mg
Wt. Loss mg
Loss mg
(Max)
(Max)
Copper
10
10
0.5 Complies
Solder
15
30
0 Complies
Brass
10
10
0 Complies
Steel
10
10
0.3 Complies
Cast iron
10
10
5.0 Complies
Aluminium
15
30
0.1 Complies
Meets both ASTM D 3306 for automotive service, ASTM D 4985 for heavy duty diesel service.
Passed ASTM D 1384- Glassware Corrosion Test, meets/exceeds Australian Standards AS/NZS
2108.1:2004 Engine coolant Type A.
GMHA specification 1825M including HN2043 and GM6043M Ford E-M97B44-1 V8 and high
performance V6 and many more.
TYPICAL MAIN CHARACTERISTICS
Appearance:
Specific gravity:
Solubility in water:
Boiling Point (undiluted) °C
Glycol Content (grams p/litre)
Flammability:
pH:
Note:
Fluorescent Green
1.10 - 1.15
Completely
168
980
non-flammable
9.75 – 10.5
The life of the coolant is 120,000 Km or up to 3 years, provided the system is well maintained.