Electric Micrometers
〉〉〉
Displays
Electric Micrometer Amplifiers
●Configured with ACCRETECH measuring head,
analog signal output
●Meter display output terminal (meter is optional)
●Automatic measuring device compatibility function
(external zero shift, abnormaly detection)
●One or two input specifications
■ Outer Appearance/Dimension Diagram
Specifications
■ Interface signal
I/O type
E-D L-11 0 A
Model
Product code
0902001
Input detector
1
Display
E - DL -1 2 0 A
0902002
Out
2
None
±900 μm
Maximum measuring range
Judgment output signal
(55)
(11.5)
No
Output signal rating
139
113
70
5 (21)
In
DC +30 V 40 mA or less
VCE: 30 V
Memory function
No
Digital output
No
Power
Power source*
Power consumption
Outer dimensions
Weight
10
93
10
3.5
DC 10mV/μm (detector and calculation)
35
FG
COM．
FG
3W
In
0 - 40°C
Yes
Standard accessories
Compact driver
＊Power provided externally
Figures in（
Electric Micrometer Amplifiers
6
Out
DC ±15 V (±1%)
70 (W) × 118 (D) × 114 (H) mm
Self diagnosis function
5
Common
Meter output Hi range
Meter output Lo range
Power input (common)
– power input
DC 12 – 24V input
Zero shift enabled input
G1 + G2 single value display
G2 single value display
G1 single value display
G1 error output
G2 error output
2-M 3
0.7kg
Usage temperature range
Zero shift quantity input
Common
+ power input
±9V (±900 μm)
Analog output
Analog input
Out
110
113.5
IC: Transistor with load capacity of 30 m or more
Pin No
1
Remarks
（2）
（3）
4
7
8
9
12
13
14
10
16
（17）
（18）
19
20
Up to ±10 V
Meter display shifts
during pin no. 16 input
Analog output for Hi meter
Analog output for Lo meter
power input
Zero shift enabled
Meter display value
switching signal
（21）
22
24
Electric Air Micrometers
Input signal rating
Signal name
G1 analog output
G2 analog output
G1 + G2 analog output
Common
・
Frame ground
）are E-DL-120A
●One input dedicated amplifier (configuration of A/E
converter and detector)
●Digital output selectable (RS232C, BCD, optional settings)
●Analog input available
●Memory function provided (MAX, MIN, P-P)
■ Outer Appearance/Dimension Diagram
Specifications
E-DL-300-1
2202579
2202580
E-DL-300-3
2202581
2202578
1
Input detector
7-segment LED
Display
Approx. 22 times/second
A/D conversion cycle
CMOS level 74HC equivalent
Judgment output (standard)
No
–NG, OK, +NG (contact output) –NG, OK, +NG (contact output) –NG, OK, +NG (open collector output)
Input signal (standard ) open collector or dry contact
Input signal (standard)
Memory function
Storage of maximum, minimum and peak-to-peak values (difference between maximum and minimum)
Digital output
No
Analog output
Analog input
Power source
Power consumption
Outer dimensions
Weight
Usage temperature range
Self diagnosis function
Standard accessories
Option
0998880
4205501
4205502
4205503
4205504
250
180
±1999 μm
Maximum measuring range
Judgment output (option)
E-DL-300-2
80
Product code
E-DL-300
RS-232C output
BCD output (CMOS level)
（9）
Model
31.5
111
22.5
202
4–M3
BCD output (open collector)
1V/2mm
1V/2mm
AC 85 – 250 V
10VA
180 (W) × 250 (D) × 80 (H) mm
2kg
0 - 40°C
Yes
3m 3-wire cabtyre cable (Power connector provided), standard small screwdriver, 0.5 A fuse
Product name
Power cable 5M
Cable RS232C cross
Cable to connect statistics printer
Judgment result connection output cable
Judgment result open collector output cable
Remarks
Accessory necessary if the provided power connector is too short.
No charge if standard straight cable is not required
No charge if standard cable is not required
Suitable for models 1 and 2
Suitable for model 3
87