WIRE BASKET CABLE TRAYS
Cable Tray Systems
Engineered to Support Powerful Reputations
MP Husky was founded in 1952 and originally began operations as Husky Products. Over the following
50+ years of leadership and service, MP Husky has gone through several transformations and mergers,
including Husky/Burndy and Metal Products, thus leading to what is today MP Husky—America’s
leading manufacturer of Cable Tray and Cable Bus Power Distribution Systems.
Throughout these changes, one thing has remained constant—the “Husky” drive to be the most reliable,
highest quality, cost effective and innovative manufacturer of Cable Support Systems and Cable Bus
Power Distribution Systems. We have an unsurpassed commitment to customer satisfaction and service,
and we are eager to earn your loyalty and trust. As we continue to build and strengthen our partnerships
with our customers, we look foward to the next years of service and support.
Aluminum Stainless Steel Galvannealed Fiberglass
Mill Galvanized Zinc Plate Hot Dipped
Wire Basket
Cable Trays
Electroplated Zinc
Wire Basket
PATENT
9602521
Shipped with pre-attached splice plates, the BF2R
Series offers a distinct advantage for installers.
This system is designed for tool-less, quick
installation.
The BF2R Series is UL Classified for use as an
equipment ground conductor. No additional
splice plates or bonding jumpers are required
with pre-attached splice plates.
To avoid damage to cables or personnel, all MP
Husky Wire Basket Cable Tray is manufactured
with a safety edge.
2
CABLE CAPACITY (in2)
Width (in)
2
2” Deep
4” Deep
6” Deep
Area (in2)
Area (in2)
Area (in2)
3.57
-
-
4
7.29
13.1
-
6
11.63
20.94
-
8
15.81
28.83
44.33
12
24.34
45.11
68.2
16
32.86
61.38
92.07
18
36.86
69.38
104.07
20
41.39
77.66
115.94
24
49.91
93.93
139.81
36
-
-
207.39
Electroplated Zinc
2” DEEP, BF2R SELF COUPLING SYSTEM
L = 10 FT / 3 m
2” Deep, 2” Wide
2
SWL
B
SWL (kg/m)*
Center Splices
EZ Part No.
3
5
0
BF2R-02X2-EZ
(lbs/ft)*
2” Deep, 4” Wide
4
8
11
0
BF2R-04X2-EZ
2” Deep, 6” Wide
6
12
18
0
BF2R-06X2-EZ
2” Deep, 8” Wide
8
16
24
0
BF2R-08X2-EZ
2” Deep, 12” Wide
12
18
26
1
BF2R-12X2-EZ
2” Deep, 16” Wide
16
23
33
1
BF2R-16X2-EZ
2” Deep, 18” Wide
18
27
40
1
BF2R-18X2-EZ
2” Deep, 20” Wide
20
25
37
2
BF2R-20X2-EZ
2” Deep, 24” Wide
24
25
37
2
BF2R-24X2-EZ
1”
Width, B (in)
2”
4”
Description
1.) BF2R available in electroplated zinc only.
2.) Splice plates come pre-installed on tray.
*Safe Working Load (SWL) based on 8 ft (2.43 m) span with a 1.5 safety factor.
L = 10 FT / 3 m
Width, B (in)
SWL (lbs/ft)*
SWL (kg/m)*
Center Splices
EZ Part No.
4” Deep, 4” Wide
4
14
21
0
BF2R-04X4-EZ
4” Deep, 6” Wide
6
19
29
0
BF2R-06X4-EZ
4” Deep, 8” Wide
8
22
32
0
BF2R-08X4-EZ
4” Deep, 12” Wide
12
28
42
1
BF2R-12X4-EZ
4” Deep, 16” Wide
16
32
48
1
BF2R-16X4-EZ
4” Deep, 18” Wide
18
46
70
2
BF2R-18X4-EZ
4” Deep, 20” Wide
20
35
52
2
BF2R-20X4-EZ
4” Deep, 24” Wide
24
36
54
2
BF2R-24X4-EZ
B + 1”
4”
Description
H 1”
4” DEEP, BF2R SELF COUPLING SYSTEM
1.) BF2R available in electroplated zinc only.
2.) Splice plates come pre-installed on tray.
*Safe Working Load (SWL) based on 8 ft (2.43 m) span with a 1.5 safety factor.
6” DEEP, BFR SYSTEM
L = 10 FT / 3 m
SWL (lbs/ft)*
SWL (kg/m)*
Center Splices
Required (*)
EZ Part No.
6” Deep, 8” Wide
8
28.88
42.97
0
BFR-08X6-EZ
6” Deep, 12” Wide
12
59.31
88.25
1
BFR-12X6-EZ
6” Deep, 16” Wide
16
51
23
1
BFR-16X6-EZ
6” Deep, 18” Wide
18
**
**
2
BFR-18X6-EZ
6” Deep, 20” Wide
20
52.73
52.73
2
BFR-20X6-EZ
6” Deep, 24” Wide
24
65.23
97.06
2
BFR-24X6-EZ
6” Deep, 36” Wide
36
98
44
3
BFR-36X6-EZ
B
1”
H
Width, B (in)
2”
4”
Description
1.) Safe Working Load (SWL) includes 1.5 safety factor.
2.) To splice trays together, 2 Lateral Union Sets are required plus applicable number of Bolt-Staple Sets (*).
*Safe Working Load (SWL) based on 8 ft (2.43 m) span with a 1.5 safety factor.
** Consult factory. Speciality size.
Wire Basket Cable Tray listed above are available in a Powder Coated finish. To order, use the first 10 characters (includes dashes), followed by:
i. PCB (Black)
ii. PCBU (Blue)
iii. PCR (Red)
iv. PCO (Orange)
v. PCW (White)
vi. PCG (Green)
vii. PCGY (Gray)
viii. PCY (Yellow)
ix. PCP (Purple)
3
HDGAF/Stainless Steel
Wire Basket
PATENT
9602521
The HDGAF BFR Series was designed to offer
both optimal design and finish. MP Husky
ensures that all HDGAF coatings are smooth
and free of sharp edges that could cause harm
to cables or installers.
The Stainless Steel BFR Series was designed to
offer both optimal design and finish.
To avoid damage to cables or personnel, all MP
Husky Wire Basket Cable Tray is manufactured
with a safety edge.
4
CABLE CAPACITY (in2)
Width (in)
2
2” Deep
4” Deep
6” Deep
Area (in2)
Area (in2)
Area (in2)
3.57
-
-
4
7.29
-
-
6
11.63
-
-
8
15.81
28.83
44.33
12
24.34
45.11
68.2
16
32.86
61.38
92.07
18
36.86
69.38
104.07
20
41.39
77.66
115.94
24
49.91
93.93
139.81
36
-
-
207.39
HDGAF/Stainless Steel
2” DEEP, BFR SYSTEM
Center Splices
Required (*)
HDGAF Part No.
SWL
(lbs/ft)*
SS304 Part No.
SWL
(lbs/ft)*
B
2”
2” Deep, 2” Wide
2
0
BFR-02X2-HDG
3
BFR-02X2-4S
3
2” Deep, 4” Wide
4
0
BFR-04X2-HDG
8
BFR-04X2-4S
6
2” Deep, 6” Wide
6
0
BFR-06X2-HDG
12
BFR-06X2-4S
10
2” Deep, 8” Wide
8
0
BFR-08X2-HDG
16
BFR-08X2-4S
14
2” Deep, 12” Wide
12
1
BFR-12X2-HDG
18
BFR-12X2-4S
15
2” Deep, 16” Wide
16
1
BFR-16X2-HDG
23
BFR-16X2-4S
19
2” Deep, 18” Wide
18
2
BFR-18X2-HDG
27
BFR-18X2-4S
23
2” Deep, 20” Wide
20
2
BFR-20X2-HDG
25
BFR-20X2-4S
21
2” Deep, 24” Wide
24
2
BFR-24X2-HDG
25
BFR-24X2-4S
21
1”
H
Width,
B (in)
4”
Description
1.) To splice trays together, 2 Lateral Union Sets are required plus applicable number of Bolt-Staple Sets (*).
2.) 316 Stainless Steel available upon request.
*Safe Working Load (SWL) based on 8 ft (2.43m) span with a 1.5 safety factor.
L = 10 FT / 3 m
4” DEEP, BFR SYSTEM
Width,
Center Splices
B (in)
Required (*)
4” Deep, 4” Wide
4
0
BFR-04X4-HDG
14
BFR-04X4-4S
12
4” Deep, 6” Wide
6
0
BFR-06X4-HDG
19
BFR-06X4-6S
16
4” Deep, 8” Wide
8
0
BFR-08X4-HDG
22
BFR-08X4-4S
18
4” Deep, 12” Wide
12
1
BFR-12X4-HDG
28
BFR-12X4-4S
24
4” Deep, 16” Wide
16
1
BFR-16X4-HDG
32
BFR-16X4-4S
27
4” Deep, 18” Wide
18
2
BFR-18X4-HDG
46
BFR-18X4-4S
39
4” Deep, 20” Wide
20
2
BFR-20X4-HDG
35
BFR-20X4-4S
30
4” Deep, 24” Wide
24
2
BFR-24X4-HDG
36
BFR-24X4-4S
31
L = 10 FT / 3 m
SWL
(lbs/ft)*
SS304 Part No.
B
SWL
(lbs/ft)*
2”
4”
HDGAF Part No.
1”
H
Description
1.) To splice trays together, 2 Lateral Union Sets are required plus applicable number of Bolt-Staple Sets (*).
2.) 316 Stainless Steel available upon request.
*Safe Working Load (SWL) based on 8 ft (2.43m) span with a 1.5 safety factor.
6” DEEP, BFR SYSTEM
L = 10 FT / 3 m
Center Splices
Required (*)
HDGAF Part No.
SWL
(lbs/ft)*
SS304 Part No.
SWL (lbs/ft)*
6” Deep, 8” Wide
8
0
BFR-08X6-HDG
28.88
BFR-08X6-4S
24.548
6” Deep, 12” Wide
12
1
BFR-12X6-HDG
59.31
BFR-12X6-4S
50.414
6” Deep, 16” Wide
16
1
BFR-16X6-HDG
**
BFR-16X6-4S
**
6” Deep, 18” Wide
18
2
BFR-18X6-HDG
**
BFR-18X6-4S
**
6” Deep, 20” Wide
20
2
BFR-20X6-HDG
35.44
BFR-20X6-4S
30.124
6” Deep, 24” Wide
24
2
BFR-24X6-HDG
65.23
BFR-24X6-4S
55.446
6” Deep, 36” Wide
36
3
BFR-36X6-HDG
**
**
**
B
1”
H
Width,
B (in)
2”
4”
Description
1.) To splice trays together, 2 Lateral Union Sets are required plus applicable number of Bolt-Staple Sets (*).
2.) 316 Stainless Steel available upon request.
*Safe Working Load (SWL) based on 8 ft (2.43m) span with a 1.5 safety factor.
** Consult factory. Speciality size.
Wire Basket Cable Tray listed above are available in a Powder Coated finish. To order, use the first 10 characters (includes dashes), followed by:
i. PCB (Black)
ii. PCBU (Blue)
iii. PCR (Red)
iv. PCO (Orange)
v. PCW (White)
vi. PCG (Green)
vii. PCGY (Gray)
viii. PCY (Yellow)
ix. PCP (Purple)
5
Fasteners &
Accessories
Fasteners & Accessories
DIVIDERS
Description
PG Part No.
SS304 Part No.
PG/SS304 Length (ft)
HDG Part No.
HDG Length (ft)
2” Divider
S2S-3M-BSR
42S-3M-BSR
10
G2S-3M-BSR
5
4” Divider
S4S-3M-BSR
44S-3M-BSR
10
G4S-3M-BSR
5
6” Divider
S6S-3M-BSR
46S-3M-BSR
10
G6S-3M-BSR
5
1.) Separators are secured to wire basket using a Staple and a B1 Bolt at 4 different locations.
2.) The following hardware is provided with Dividers:
a.) 4 B1 Bolts
b.) 4 Staples
c.) 1 Separator Splice
3.) 316 Stainless Steel available upon request.
4”
1”
35-1/2”
9/32”x2”
SLOTS
4”
4”
4”
1/2”
EZ Part No.
HDGAF Part No.
Quick Splice Connector
QUICK-JOINT-EZ
QUICK-JOINT-HDG
2/16”
Description
1”
QUICK SPLICE
1.) Quick connector for 2” deep and 4” deep wire basket.
2.) No hardware is required to secure quick connector to tray.
1/16”
3.) Quick Splices are shipped in quantities of 50.
1/2”
Description
EZ Part No.
HDGAF Part No.
SS304 Part No.
Bolt-Staple Set
BOLT-STAPLE-SET-EZ
BOLT-STAPLE-SET-HDG
BOLT-STAPLE-SET-4S
13/16”
BOLT-STAPLE SET
1.) Bolt-Staple Set inlcudes Bolt-Nut Set and Staple.
1/4”
11/16”
2.) Bolt-Staple Sets are shipped in quantities of 100.
PATENT
9602521
1 1/8”
LATERAL UNION SET
EZ Part No.
HDGAF Part No.
SS304 Part No.
Lateral Union Set
LATERAL-UNION-EZ
LATERAL-UNION-HDG
LATERAL-UNION-4S
1.) The Lateral Union Set consists of a Lateral Union Set and a Bolt-Nut Set.
3”
1 5/16”
Description
2.) The Lateral Union Set is the recommended splice plate for BFR Series Wire Basket.
1/4”
3.) Lateral Union Sets are shipped in quantities of 100.
7
Fasteners & Accessories
Wire Basket
BOLT-NUT SET
EZ Part No.
HDGAF Part No.
SS304 Part No.
Bolt-Nut Set
BOLT-NUT-SET-EZ
BOLT-NUT-SET-HDG
BOLT-NUT-SET-4S
13/16”
7/8”
Description
1.) Bolt-Nut Set consists of a bolt and a nut.
2.) Bolt-Nut Sets are shipped in quantities of 100.
13/16”
1/4”
PATENT
9602521
STAPLE
EZ Part No.
HDGAF Part No.
SS304 Part No.
Staple
BF-STAPLE-EZ
BF-STAPLE-HDG
BF-STAPLE-4S
5/16” x 5/16”
11/16”
Description
1.) Combined with B1 Bolt to mount separators to wire basket.
2.) Staples shipped in quantities of 100.
3.) 316 Stainless Steel available upon request.
1/4”
1 1/8”
SSC HOLD DOWN
EZ Part No.
HDGAF Part No.
SS304 Part No.
Hold Down
SSC-EZ
SSC-HDG
SSC-4S
2”
1.) Combined with 1 Bolt-Nut Set, 2 SSC Hold Downs can be used to create a adjustable horiztonal fitting or small
radius fitting.
2.) Combined with threaded rod and nuts, 2 SSC Hold Downs can be used as a center hanger support for 4”,6”, and 8”
widths.
3.) Combined with a spring nut and bolt, SSC Hold Downs can be used to secure wire basket to strut.
4.) SSC Hold Downs are shipped in quantities of 50.
1 9/16”
Description
3/8
”
2 3/8”
VERTICAL SPLICE PLATES
PG Part No.
Vertical Splice Plates
JUA-BFR-PG
1.) 2 Vertical Splices Plates required to create vertical fitting.
11/16x5/16”
1/4”
3/4”
Description
1/4”
2.) Secured to wire basket using Bolt-Staple Sets.
B1
3.) Vertical Splice Plates include the following hardware:
a.) 2 B1 Bolts
8
5/8”
Fasteners & Accessories
DROP-OUT PLATE
PG Part No.
HDGAF Part No.
Drop-Out Plate
DROP-OUT-PG
DROP-OUT-HDG
4" (100)
3" (76)
2" (50)
Description
1.) No hardware is required to secure Drop-Out Plate to wire basket.
3 5/7" (94)
5/7"x2/7" (11/16”x5/16”)
SMALL DROP-OUT PLATE
Description
PG Part No.
HDGAF Part No.
Small Drop-Out Plate
DROP-OUT-SM-PG
DROP-OUT-SM-HDG
11/16”
1-3/4”
3-15/16”
18x5/16”
1.) No hardware is required to secure Small Drop-Out Plate to wire basket.
1-15/16”
HDG Part No.
MULTI-UNION-HDG
1.) Multi purpose bracket used to field fabricate fittings.
2.) Secured to wire basket using Bolt-Staple Sets.
20”
PG Part No.
MULTI-UNION-PG
1”
Description
Multi-Union Joint
11/16” x 1/4”
MULTI-UNION JOINT
3.) Multi-Union Joints are shipped in quantities of 10.
5/8”
CONDUIT CLAMP
1.) Conduit Clamp attached to wire basket using bendable tab.
2.) Conduit Clamp accomodates 1/2” to 2” U-bolts.
1/16”
5/16”
CONDUIT-CLAMP-PG
4-3/16”
Conduit Clamp
11/16”
3-13/16”
PG Part No.
1/4”
Description
9
Fasteners & Accessories
Wire Basket
COVERS
Length (ft)
PG Part No.
Self Weight (lbs/ud)
HDGAF Part No.
Self Weight (lbs/ud)
2
5
COVER-H2-02-PG
1.74
COVER-H2-02-HDG
2.58
Cover for BFR/BF2R 2”D,4”W
4
10
COVER-H2-04-PG
4.70
COVER-H2-04-HDG
6.96
Cover for BFR/BF2R 2”D,6”W
6
10
COVER-H2-06-PG
6.55
COVER-H2-06-HDG
9.69
Cover for BFR/BF2R 2”/6”D,8”W
8
10
COVER-H2H6-08-PG
8.41
COVER-H2H6-08-HDG
12.45
Cover for BFR/BF2R 2”/6”D,12”W
12
10
COVER-H2H6-12-PG
12.11
COVER-H2H6-12-HDG
17.92
Cover for BFR/BF2R 2”/6”D,16”W
16
10
COVER-H2H6-16-PG
15.81
COVER-H2H6-16-HDG
23.40
Cover for BFR/BF2R 2”/6”D,20”W
20
10
COVER-H2H6-20-PG
22.30
COVER-H2H6-20-HDG
33.00
Cover for BFR/BF2R 2”/6”D,24”W
24
10
COVER-H2H6-24-PG
26.53
COVER-H2H6-24-HDG
39.26
Cover for BFR/BF2R 4”D,8”W
8
10
COVER-H4-08-PG
9.07
COVER-H4-08-HDG
13.42
Cover for BFR/BF2R 4”D,12”W
12
10
COVER-H4-12-PG
12.77
COVER-H4-12-HDG
18.90
Cover for BFR/BF2R 4”D,16”W
16
10
COVER-H4-16-PG
16.48
COVER-H4-16-HDG
24.39
Cover for BFR/BF2R 4”D,20”W
20
10
COVER-H4-20-PG
23.06
COVER-H4-20-HDG
34.13
Cover for BFR/BF2R 4”D,24”W
24
10
COVER-H4-24-PG
27.29
COVER-H4-24-HDG
40.39
COVER-CLIP-PG
13/16”
1-1/8”
Width (in)
1-15/16”
Description
Cover for BFR/BF2R 2”D,2”W
1.) Covers secured to wire basket using 4 Cover Clips.
2.) Cover Clips secured to wire basket using bendable tabs. No hardware required.
SOLID BOTTOM INSERTS
Description
Width (in)
Length (ft)
PG Part No.
Solid Bottom Insert, 4” Wide
4
10
SWB0SBI-4-3M-BSR
Solid Bottom Insert, 6” Wide
6
10
SWB0SBI-6-3M-BSR
Solid Bottom Insert, 8” Wide
8
10
SWB0SBI-8-3M-BSR
Solid Bottom Insert, 12” Wide
12
10
SWB0SBI-12-3M-BSR
Solid Bottom Insert, 16” Wide
16
10
SWB0SBI-16-3M-BSR
Solid Bottom Insert, 18” Wide
18
10
SWB0SBI-18-3M-BSR
Solid Bottom Insert, 20” Wide
20
10
SWB0SBI-20-3M-BSR
Solid Bottom Insert, 24” Wide
24
10
SWB0SBI-24-3M-BSR
Solid Bottom Insert, 36” Wide
36
10
SWB0SBI-36-3M-BSR
1.) Solid Bottom Inserts are secured to wire basket using an SSC Hold Down and a B1 Bolt at each hole location (2 holes).
2.) The following hardware is provided with Solid Bottom Inserts:
a.) 2 SSC Hold Downs
b.) 2 B1 Bolts
SIMPLE SL
PG Part No.
HDGAF Part No.
SS304 Part No.
Simple SL
SIMPLE-SL-PG
SIMPLE-SL-HDG
SIMPLE-SL-4S
1/2” x 5/16”
2 5/8”
4 1/16”
1.) Can be used to mount BFR/BF2R-04X2 and BFR/BF2R-02X2 to wall.
2.) Simple SL’s can be used as side hanger supports on wire basket widths 8” and smaller.
11/16” x 5/16”
1 3/16”
10
3/4”
1”
Description
Fasteners & Accessories
WALL SUPPORT
7-7/8”
Wall Support
WALL-SUPPORT-PG
1”
1-15/16”
1”
1-15/16”
PG Part No.
13/16”
Description
1”x7,5
1.) Attached to wire basket using 2 Bolt-Staple Sets.
ADJUSTABLE SPLICES
Description
EZ Part No.
HDG Part No.
SS304 Part No.
Adjustable Splices
CU-BFR-PG
CU-BFR-HDG
CU-BFR-4S
1.) Used for field fabrication of fittings. Splices are adjustable to allow for more flexibility.
2.) Adjustable Splices are shipped in quantities of 100.
SIDE HANGER CLIP
Side Hanger Clip
SU-T-PG
1”
1”
1-1/4”
PG Part No.
1/16”
Description
2.) Side Hanger Clips are shipped in quantities of 25.
6”
1.) Acceptable for use on wire basket widths 8” and smaller.
7/1
3/16”
3/8”
END PLATES/REDUCERS
SS304 Part No.
2” Deep, 2” Wide
REER-2WX2H-PG
REER-2WX2H-HDG
REER-2WX2H-4S
2” Deep, 4” Wide
REER-4WX2H-PG
REER-4WX2H-HDG
REER-4WX2H-4S
4” Deep, 2” Wide
REER-2WX4H-PG
REER-2WX4H-HDG
REER-2WX4H-4S
4” Deep, 4” Wide
REER-4WX4H-PG
REER-4WX4H-HDG
REER-4WX4H-4S
6” Deep, 2” Wide
REER-2WX6H-PG
REER-2WX6H-HDG
REER-2WX6H-4S
6” Deep, 4” Wide
REER-4WX6H-PG
REER-4WX6H-HDG
REER-4WX6H-4S
7/8”x5/16”
HDG Part No.
2-3/8”
PG Part No.
B
Description
1.) REERs can be used as end plates or reducers.
2.) 2 Bolt-Staple Sets are required to attach REERs to wire basket.
13/15”
3.) REERs can be combined to create larger widths. If REERs are combined, a B1 Bolt is required to attach REERs
H
together.
4.) REERs are shipped in quantities of 10.
SS304 Part No.
2”X2” Support
PS-2X2-4S
1.) Used with 2” deep, 2” wide wire basket to allow for attachment of supports.
1/2”x5/16”
1-3/16”
Description
2-7/16”
2”X 2” SUPPORT
35x7,5
11
Fasteners & Accessories
Wire Basket
WALL PENETRATION SLEEVES
Description
Height (H)
Width (W)
PG Part No.
Wall Penetration Sleeve, 2” Deep, 4” Wide
2
4
PWPS-4-BF2R20
Wall Penetration Sleeve, 2” Deep, 6” Wide
2
6
PWPS-6-BF2R20
Wall Penetration Sleeve, 2” Deep, 8” Wide
2
8
PWPS-8-BF2R20
Wall Penetration Sleeve, 2” Deep, 12” Wide
2
12
PWPS-12-BF2R20
Wall Penetration Sleeve, 2” Deep, 16” Wide
2
16
PWPS-16-BF2R20
Wall Penetration Sleeve, 2” Deep, 18” Wide
2
18
PWPS-18-BF2R20
Wall Penetration Sleeve, 2” Deep, 20” Wide
2
20
PWPS-20-BF2R20
Wall Penetration Sleeve, 2” Deep, 24” Wide
2
24
PWPS-24-BF2R20
Wall Penetration Sleeve, 4” Deep, 4” Wide
4
4
PWPS-4-BF2R40
Wall Penetration Sleeve, 4” Deep, 6” Wide
4
6
PWPS-6-BF2R40
Wall Penetration Sleeve, 4” Deep, 8” Wide
4
8
PWPS-8-BF2R40
Wall Penetration Sleeve, 4” Deep, 12” Wide
4
12
PWPS-12-BF2R40
Wall Penetration Sleeve, 4” Deep, 16” Wide
4
16
PWPS-16-BF2R40
Wall Penetration Sleeve, 4” Deep, 18” Wide
4
18
PWPS-18-BF2R40
Wall Penetration Sleeve, 4” Deep, 20” Wide
4
20
PWPS-20-BF2R40
Wall Penetration Sleeve, 4” Deep, 24” Wide
4
24
PWPS-24-BF2R40
Wall Penetration Sleeve, 6” Deep, 8” Wide
6
8
PWPS-8-BFR60
Wall Penetration Sleeve, 6” Deep, 12” Wide
6
12
PWPS-12-BFR60
Wall Penetration Sleeve, 6” Deep, 16” Wide
6
16
PWPS-16-BFR60
Wall Penetration Sleeve, 6” Deep, 18” Wide
6
18
PWPS-18-BFR60
Wall Penetration Sleeve, 6” Deep, 20” Wide
6
20
PWPS-20-BFR60
Wall Penetration Sleeve, 6” Deep, 24” Wide
6
24
PWPS-24-BFR60
Wall Penetration Sleeve, 6” Deep, 36” Wide
6
36
PWPS-36-BFR60
I.) Wall Penetration Sleeve includes the following items:
a.) 1 Wall Penetration Pan
b.) 2 Wall Penetration Connectors
c.) 1 Wall Penetration Pan Cover
II.) Hardware included. Contact factory for specific counts per size.
III.) *- For reference only.
IV.) 316 Stainless Steel available upon request
12
Front View
Side View
c) Wall Penetration Cover
b) Wall Penetration
Connector
II.) 6-26
(Hardware,
8 locations)
a.) Wall Penetration Pan
II.) B-100
N-100
(Hardware)
Fasteners & Accessories
FITTING KITS
Description
Part No.
Description
Part No.
Horizontal 90 Degree Kit
WB-90-K
Vertical Kit
WB-VERT-K
1.) Horizontal 90 Degree Kit includes:
1.) Vertical Kit includes:
a.) 1 Multi-Union Joint (MULTI-UNION-PG)
a.) 2 Vertical Splice Plates (JUA-BFR-PG)
b.) 1 Bolt-Nut Set (BOLT-NUT-SET-EZ)
b.) 4 Bolt-Staple Sets (BOLT-STAPLE-SET-EZ)
c.) 4 Bolt-Staple Sets (BOLT-STAPLE-SET-EZ)
d.) 2 SSC Hold Downs (SSC-EZ)
Description
Part No.
Tee Kit
WB-TEE-K
1.) Tee Kit includes:
Description
Part No.
Splice Kit
WB-SPLICE-K
1.) Splice Kit includes:
a.) 2 Lateral Union Sets (LATERAL-UNION-EZ)
b.) 3 Bolt-Staple Sets (BOLT-STAPLE-SET-EZ)
a.) 2 Multi-Union Joints (MULTI-UNION-PG)
b.) 8 Bolt-Staple Sets (BOLT-STAPLE-SET-EZ)
HOLD DOWN CLIP
Description
PG Part No.
Hold Down Clip
CLIP-FIL-PG
1.) A quick and inexpensive option for securing wire
basket to strut.
2.) Shipped in quantities of 100
CUTTING TOOL
Description
Part No.
Cutting Tool
WBCT
1.) Used for cutting wires for field modifications.
2.) This cutter is equipped with offset blades for more
precise cutting.
3.) Handles are 17” long.
ZINC RICH PAINT
Description
Part No.
Zinc Rich Paint
ZRP-740
1.) For optimum protection against corrosion, field cut ends should be coated with
zinc rich paint.
13
Supports &
Grounding
Supports & Grounding
PG Part No.
HDGAF Part No.
SS304 Part No.
198
CSHO-06-PG
CSHO-06-HDG
CSHO-06-4S
8”/12” Bracket
12
99
CSHO-12-PG
CSHO-12-HDG
CSHO-12-4S
SHO-SHOT-PG
SHO-SHOT-HDG
SHO-SHOT-4S
Bracket Support
1.) Wire basket secured to L Wall Bracket using bendable tab on bracket. No hardware required.
2”
SWL (lb/ft)
6
4 7/16”
Width (in)
3 5/8”
4 7/16”
2 1/16”
Description
4”/6” Bracket
1”
L WALL BRACKET
13/16” x 3/8”
e
2.) 1 Bracket Support is required with each L Wall Bracket.
2”
SWL (lb/ft)
PG Part No.
HDGAF Part No.
SS304 Part No.
4”/6” Bracket
6”
132
SRB-06-PG
SRB-06-HDG
SRB-06-4S
8”/12” Bracket
12”
132
SRB-12-PG
SRB-12-HDG
SRB-12-4S
16”/20” Bracket
20”
132
SRB-20-PG
SRB-20-HDG
SRB-20-4S
24” Bracket
24”
132
SRB-24-PG
SRB-24-HDG
SRB-24-4S
”
1/2
B+2”
17/16”
SRB Support 6”, 12”
1 7/16” 13/16”
13/16”
”
1/2
4 13/16”
1.) Wire basket secured to Shelf Wall Bracket using bendable tab on bracket. No hardware required.
13/16”
12x8
1 1/8”
Width (in)
5/16”
1 1/8”
Description
3 3/8”
1 7/16” 13/16”
SHELF WALL BRACKET
B+2”
17/16”
SRB Support 20”, 24”
WALL BRACKET ADJUSTABLE SUPPORT
45°
2 3/16”
3 3/8”
WALL-BRACKET-PG
”
Wall Bracket Adjustable Support
”
6
2 5/1
3/8
PG Part No.
2 3/8”
Description
1.) Allows for Shelf Wall Bracket to be adjusted vertically for curved walls, etc.
2 7/8”
1 7/16”
15
Supports & Grounding
Wire Basket
TRAPEZE HANGERS
SWL (lbs/ft)
PG Part No.
HDGAF Part No.
4”/6” Trapeze Hanger
6”
440
CSVO-06-PG
CSVO-06-HDG
8”/12” Trapeze Hanger
12”
517
CSVO-12-PG
CSVO-12-HDG
16”/18”/20” Trapeze Hanger
20”
253
CSVO-20-PG
CSVO-20-HDG
24” Trapeze Hanager
24”
191
CSVO-24-PG
CSVO-24-HDG
3M Trapeze Hanger
118 1/8”
CSVO-3M-PG
CSVO-3M-PG
e
2 1/16”
B + 4”
1.) Wire basket secured to Trapeze Hanger using bendable tab on bracket. No hardware required.
2.) Designed for use with standard and center hung applications.
3.) For use with 1/4” threaded rod.
13/16” x 3/8”
TRAPEZE
13/16”
Width (in)
1”
Description
2”
CENTER HUNG
SWL
(lbs/ft)
PG Part No.
HDGAF Part No.
SS304
4”/6” Raised Floor Support
6”
264
SV-06-PG
SV-06-HDG
SV-06-4S
8”/12” Raised Floor Support
12”
198
SV-12-PG
SV-12-HDG
SV-12-4S
16”/20” Raised Floor Support
20”
330
SV-20-PG
SV-20-HDG
—
24” Raised Floor Support
24”
396
SV-24-PG
SV-24-HDG
—
6”, 12”
1 3/8” x 1/4”
1 9/16”
Width
(in)
1/2”
Description
1 9/16”
1 1/2” RAISED FLOOR SUPPORTS
B+1 3/4”
B+2 13/16”
SV 6”, 12”
1.) Can be used to raise wire basket 1 1/2” off of floor.
2.) Can be used to secure wire basket to walls for vertical applications.
1 9/16”
”
3.) 2 Bolt-Staple Sets are required to secure wire basket to support for 6” and 12” supports, and
1/2
4 Bolt-Staple Sets are required for 20” and 24” supports.
1 9/16”
1 1/16”
B+5 3/4”
20”, 24”
SV 20”, 24”
2” RAISED FLOOR SUPPORTS
PG Part No.
HDGAF Part No.
2” Raised Floor Supports
PBFR-2-PG
PBFR-2-HDG
1.) Used to raise wire basket 2’ above finished floor.
1-15/16”
1-15/16”
Description
2-3/8”
3-3/8”
2.) Wire basket secured to 2” Raised Floor Support using bendable tabs on support.
No hardware required.
9/16”, 1/4”
16
9/16”
Supports & Grounding
Description
PG Part No.
4” Raised Floor Support
SFS-SUPPORT-PG
1.) When combined with a Underfloor Support Bracket, creates a raised floor wire basket system.
2.) Underfloor Support Bracket is secured to Raised Floor Support using 2 B1 Bolts.
5-9/16”
5.5” RAISED FLOOR SUPPORTS
1”
5/16” (B1)
1/1
6”
RAISED FLOOR KIT
CSVO-UF-PG
5/16x5/16 (B1)
3/8
13
1.) 1 Raised Floor Cross Member and 2 Raised Floor Support Brackets are required to secure wire
basket to 2 raised floor support posts (customer supplied). 2 B1 Bolts are required to secure
Raised Floor Cross Member to the 2 Raised Floor Support Brackets. No additional hold downs
are required to secure wire basket to Raised Floor Cross Members.
2-3/4
Raised Floor Cross Member
6
KIT-FS-PG
/1
Raised Floor Support Bracket
13/16
2-3/8
PG Part No.
4-3/4
3-15/16
Description
=
=
Description
Brass Part No.
Ground Clamp (#8 AWG STR - #2 AWG STR)
BGC-35
Ground Clamp (1/0 AWG STR - 4/0 AWG STR)
BGC-95
1 3/16”
GROUNDING CONNECTORS
17
Assembly
Instructions
Assembly Instructions
Always use wire cutters with offset blades.
19
Assembly Instructions
BOLT-STAPLE
SET
MULTI-UNION
JOINT
20
WIDTH
(IN)
NO.
ACCESSORIES REQUIRED
2
2
4 Bolt-Staple Sets, 1 Multi-Union Joint
4
3
6 Bolt-Staple Sets, 1 Multi-Union Joint
6
4
8 Bolt-Staple Sets, 1 Multi-Union Joint
8
4
6 Bolt-Staple Sets, 2 Multi-Union Joints
12
6
8 Bolt-Staple Sets, 2 Multi-Union Joints
16
8
10 Bolt-Staple Sets, 2 Multi-Union Joints
18
8
10 Bolt-Staple Sets, 2 Multi-Union Joints
20
9
11 Bolt-Staple Sets, 2 Multi-Union Joints
24
11
12 Bolt-Staple Sets, 2 Multi-Union Joints
Wire Basket
Assembly Instructions
CU-BFR
WIDTH
(IN)
NO.
ACCESSORIES REQUIRED
4
2
Adjustable Splices (Part#: CU-BFR)
6
4
Adjustable Splices (Part#: CU-BFR)
8
4
Adjustable Splices (Part#: CU-BFR)
12
6
Adjustable Splices (Part#: CU-BFR)
16
8
Adjustable Splices (Part#: CU-BFR)
18
8
Adjustable Splices (Part#: CU-BFR)
20
9
Adjustable Splices (Part#: CU-BFR)
24
11
Adjustable Splices (Part#: CU-BFR)
21
Assembly Instructions
BOLT-STAPLE
SET
SSC-EZ
MULTI-UNION
JOINT
BF BOLT-NUT
SET
WIDTH
(IN)
D
L
ACCESSORIES REQUIRED
2
-
1
1 Horizontal 90 Degree Kit (Part #: WB-90-Kit)
4
1
1+1
1 Horizontal 90 Degree Kit (Part #: WB-90-Kit)
6
1
1+1
1 Horizontal 90 Degree Kit (Part #: WB-90-Kit)
8
2
2+2
1 Horizontal 90 Degree Kit (Part #: WB-90-Kit)
12
2
2+2
1 Horizontal 90 Degree Kit (Part #: WB-90-Kit)
16
2
3+3
1 Horizontal 90 Degree Kit (Part #: WB-90-Kit)
18
2
4+4
1 Horizontal 90 Degree Kit (Part #: WB-90-Kit)
20
2
4+4
1 Horizontal 90 Degree Kit (Part #: WB-90-Kit)
24
2
5+5
1 Horizontal 90 Degree Kit (Part #: WB-90-Kit)
22
Wire Basket
Assembly Instructions
BOLT-STAPLE
SET
MULTI-UNION
JOINT
WIDTH
(IN)
L
ACCESSORIES
REQUIRED (TEE)
ACCESSORIES
REQUIRED (CROSS)
2
1
1 Tee Kit
(Part #: WB-TEE-K)
2 Tee Kits
(Part #: WB-TEE-K)
4
1
1 Tee Kit
(Part #: WB-TEE-K)
2 Tee Kits
(Part #: WB-TEE-K)
6
2
1 Tee Kit
(Part #: WB-TEE-K)
2 Tee Kits
(Part #: WB-TEE-K)
8
2
1 Tee Kit
(Part #: WB-TEE-K)
2 Tee Kits
(Part #: WB-TEE-K)
12
3
1 Tee Kit
(Part #: WB-TEE-K)
2 Tee Kits
(Part #: WB-TEE-K)
16
4
1 Tee Kit
(Part #: WB-TEE-K)
2 Tee Kits
(Part #: WB-TEE-K)
18
5
1 Tee Kit
(Part #: WB-TEE-K)
2 Tee Kits
(Part #: WB-TEE-K)
20
5
1 Tee Kit
(Part #: WB-TEE-K)
2 Tee Kits
(Part #: WB-TEE-K)
24
6
1 Tee Kit
(Part #: WB-TEE-K)
2 Tee Kits
(Part #: WB-TEE-K)
23
Assembly Instructions
BOLT-STAPLE
SET
Wire Basket
MULTI-UNION
JOINT
BOLT-STAPLE
SET
MULTI-UNION
JOINT
24
Assembly Instructions
25
C
Assembly Instructions
M
Y
CM
CY CMY
Wire Basket
OTHER POSSIBILITIES
26
MY
K
SPECIFICATIONS
1.0
Specification for Husky Wire Mesh Cable Support System
2.0
Manufacturer: MP Husky
3.0
BF2R Series, (2” and 4” Deep), Product Description: The BF2R Series Wire Basket Cable Tray is formed from
high strength steel wire mesh. The mesh is fabricated using a 2”x4” pattern, with welds at all intersections.
Wire size for each tray type is optimized for both quality and strength. The BF2R Series comes with preinstalled splice connectors that allow for easy installation without the use of tools.
4.0
3.1
Material: Standard tray finish shall be electroplated zinc (EZ). Other finish options available are as
follows: Powder Coated (PC*).
3.2
Connectors: Wire Basket Cable Tray shall have pre-installed quick splice connectors (The BF2R
Series is Classified by UL for use as an equipment grounding conductor).
3.3
Straight sections shall be supplied in 10’ (3m/118-1/8”) lengths.
3.4
Safety Edge: Wire Basket Cable Tray shall have a safety edge to prevent inadvertent damage to
cables or installers.
BFR Series, (2”, 4”, and 6” deep), Product Description: BFR Series Wire Basket Cable Tray is formed from high
strength steel wire mesh. The mesh is fabricated using a 2”x4” pattern, with welds at all intersections. Wire
size for each tray type is optimized for quality and strength.
4.1
Material: Standard tray finish shall be electroplated zinc (EZ). Other finish options available are as
follows: Hot Dip Galvanized After Fabrication (HDGAF), Stainless Steel 304 (SS304), Stainless Steel
316 (SS316), and Powder Coated (PC*).
4.2
Straight sections shall be supplied in 10’ (3m/118-1/8”) lengths.
4.3
Safety Edge: Wire Basket Cable Tray shall have a safety edge to prevent inadvertent damage to
cables or installers.
5.0
Tray shall be UL Classified for use as an equipment ground conductor, when installed according to
manufacturer’s instructions.
6.0
Fittings: Fittings shall be field fabricated from straight sections, based on the needs of the installer. MP
Husky recommends that wire basket is cut using a cutting tool with offset blades (WBCT). MP Husky offers
a variety of different options for creating fittings and field modifications.
7.0
The Wire Basket Cable Tray shall be supplied by a member of NEMA VE-1 and installed in accordance with
NEMA VE-2 “Cable Tray Installation Guidelines”.
27
STANDARD FINISHES
Electroplated Zinc (EZ)
Electroplating is the process of applying a zinc coating to a product by electrolysis after the product has been
fabricated. Electroplating requires that current be applied through the product, thereby attracting the zinc to
the product. The Electroplated Zinc process creates a smooth, shiny finish that is capable of providing corrosion
protection.
Hot Dip Galvanized After Fabrication (HDGAF)
Hot Dip Galvanizing After Fabrication is the process of applying a zinc coating by dipping the product in a bath
of molten zinc after the part has been fabricated. While the steel is in the bath of molten zinc, the iron in the steel
metallurgically reacts with the molten zinc to form a tightly-bonded alloy coating that provides superior corrosion
protection to steel. Hot Dip Galvanized coating thicknesses vary depending on the thickness of the base metal,
immersion rate, temperature of the bath, immersion period, and withdrawal rate. If the steel is exposed to the
elements due to mechanical damage, the surrounding zinc corrodes sacrificially, protecting the underlying steel
from corrosive attack.
Stainless Steel (SS304)
Stainless Steel 304 is steel alloyed with chromium and other elements to increase the corrosion protection of the
steel. The chromium naturally reacts with the oxygen in the air, creating a chromium oxide layer that is resistant to
corrosion.
Stainless Steel (SS316)
Stainless Steel 316 is similar to Stainless Steel 304, but alloyed with molybdenum. The molybdenum creates an
additional layer of corrosion protection.
Powder Coated (PC)
Powder Coating is a process that begins with a dry powder and ends with a smooth, cured coating. The powder
is electrostatically charged creating a positive attraction that draws the powder to the metal product. Powder is
applied to the part, ensuring all areas are coated as evenly and thoroughly as possible. In order to cure the powder
on the product, the product is then placed in an oven to allow the powder to melt and flow into an even coating.
28
NOTES
204 Old Piedmont Hwy
Greenville, SC 29605
Phone: 864-234-4800
Fax: 864-234-4822
mphusky.com