Interior warm
white LED tape light
Flexible LED Lighting
The art of flexibility is perfectly demonstrated with DALS LED Tape lighting solutions. An excellent choice for a variety
of applications such as bedrooms, kitchens and workspaces.
Key features
• Can be interconnected
• Fully dimmable
• Complete custom sizes available in 2” (HP series) or 4” (standard series) increments
26
dalslighting.com
OUTDOOR
INDOOR
MODEL
ACCESSORIES
LEDTAPE-12
2.4W LED tape in 3000°K
LEDACC-PLUG-WIRE
LEDTAPE-1M
7.2W LED tape in 3000°K
LEDACC-SCTE-PLUG
LEDTAPE-5M
36W LED tape in 3000°K
LEDTAPE-HP-12
4.8W LED tape in 3000°K
LEDTAPE-HP-1M
14.4W LED tape in 3000°K
LEDTAPE-HP-5M
72W LED tape in 3000°K
SPECIFICATION
• Over 50,000 hours of service life.
LEDACC-SCTE-REC
LEDTAPEACC-WIRE
LEDTAPEACC-24CC
LEDTAPEACC-Y24
LEDTAPEACC-36ECU
LEDTAPEACC-72ECU
LEDTAPEACC-CROSS
• 12V DC—LED driver required.
• Dimmable with most low voltage electronic dimmers
when used with DALS dimming power supply.
• Dimmable with DALS 6 zone translator.
• Warm white light.
LEDTAPEACC-L
LEDTAPEACC-FEMP
LEDTAPEACC-MALEP
LEDTAPEACC-FFC-SCTE
• Excellent color rendering.
• Superior LED performance and lifespan.
LEDTAPEACC-FFC-TAPE
• Minimal heat emission.
LED6ZONE-72W
LED6ZONE-RMT
LEDTAPE-ALXT00FR
• Very low
• Can be cut at every cut mark.
• Offered as a full custom setup by DALS.
LEDTAPE-ALXT45FR
10’’ (25.4 cm) Cord with
DALS plug and bare wire
10” (25.4 cm) Cord with screw
terminal and DALS plug
10” (25.4 cm) Cord with screw
terminal and DALS receptacle
10” (25.4 cm) Tape connector
cord with screw terminal
24” (61 cm) Connection
cord accessory
24” (61 cm) Y splitter harness
36” (91.4 cm) Extension cord
72” (182.9 cm) Extension cord
Cross shaped splitter
for multiple directions
L shaped connection for corner
installations
Female pins
Male pins
connector
(15.2
6” cm) Flat
with screw terminal
(15.2
6” cm) Flat
connector
with tape connector
72W 6 zone translator
Remote for 6 zone translator
1 m Horizontal extrusion
with brackets and end caps
1 m 45° extrusion
with brackets and end caps
INSTALLATION
• Intended for surface mounting only in any direction.
• Very low
and 3M® adhesive make it very easy
to install in usually inaccessible places.
2” (5 cm)
0.5" (1.2 cm)
• Multiple LED tapes can be linked together.
• 5 m maximum run recommended.
LEDTAPE-12 11.875” L (30 cm)
LEDTAPE-1M 39.375” L (1 m)
LEDTAPE-5M 196.875” L (5 m)
LED ARRAY
2.4W, 3000°K, 126 Lumens
7.2W, 3000°K, 420 Lumens
36W, 3000°K, 2100 Lumens
4.8W, 3000°K, 270 Lumens
14.4W, 3000°K, 900 Lumens
72W, 3000°K, 4500 Lumens
190.5’’
(50 cm)
110°
38 FC
24"
(61 cm)
FINISH
WH
White
POWER SUPPLIES—PLUG IN
ETR-LED10WPI 12VDC/10Wclass 2 LED driver
ETR-LED24WPI 12VDC/24W class 2 LED driver
ETR-LED96WPI 12VDC/96W class 2 LED driver
ORDERING EXAMPLE
LEDTAPE-HP-1M
Would order a 1 m LED tape light with a 14.4W LED
array with 900 Lumens at 3000°K.
LEDTAPE-HP-CUSTOM-72
POWER SUPPLIES—HARD-WIRED
BT7LED
BT12LED
BT24LED
BT100LED-12V
BT12WDIMLED
BT33WDIMLED
BT48WDIMLED
Would order a 72” custom LED tape light with a 28.8W LED
array with 1620 Lumens at 3000°K.
12VDC/8.4W class 2 LED driver
12VDC/12W class 2 LED driver
12VDC/24W class 2 LED driver
12VDC/100W class 2 LED driver
12VDC/12W class 2 dimmable LED driver
12VDC/33W class 2 dimmable LED driver
12VDC/48W class 2 dimmable LED driver
dalslighting.com
27