New generation lighting
x-Glo Specifications
Lux Readings at:
Light
Source
Minimum
Cutting
Length
Part Number
Description
Range
Voltage
1m
2m
3m
4m
5m
Working
Voltage
x-Glo-60-36v
60 LED/m
9
42m
36v
333.91
83.49
37.11
20.87
13.36
DC36
5050
54.99cm
x-Glo-36-36v
36 LED/m
5.5
48m
36v
207.41
51.86
23.05
12.96
8.29
DC36
5050
30.55cm
x-Glo-30-36v
30 LED/m
4.4
58m
36v
159.61
36.91
17.74
9.97
6.35
DC36
5050
36.66cm
x-Glo-24-36v
24 LED/m
3.6
68m
36v
142.51
35.63
15.83
8.90
5.70
DC36
5050
45.83cm
x-Glo-18-36v
18 LED/m
3.3
82m
36v
107.51
26.89
11.95
6.7
4.30
DC36
5050
50.00cm
x-Glo-12-36v
12 LED/m
2.45
90m
36v
72.18
18.05
8.02
4.51
2.88
DC36
5050
25.00cm
x-Glo-60-24v
60 LED/m
9
25m
24v
350.71
87.68
38.97
21.92
14.03
DC24
5050
54.99cm
x-Glo-72-12v
72 LED/m
10
10m
12v
297.9
74.47
33.10
18.62
11.91
DC12
2835
8.33cm
x-Glo-72-220v
72 LED/m
14
50m
220v
354.21
88.55
39.36
22.14
14.17
AC230
2835
100.00cm
x-Glo-36-220v
36 LED/m
14
50m
220v
128.31
32.08
14.26
8.019
5.132
AC230
2835
100.00cm
x-Glo-72-110v
72 LED/m
12
40m
110v
241.32
60.32
26.81
15.08
9.65
AC110
2835
100.00cm
x-Glo-14-RC
14 LED/m – Red
12
110m
24v
•
•
•
•
•
DC24
3014
20.00cm
x-Glo-14-GC
14 LED/m – Green
12
110m
24v
•
•
•
•
•
DC24
3014
50.00cm
x-Glo-72-R-220v
72 LED/m – Red
14
50m
220v
•
•
•
•
•
AC230
2835
100.00cm
x-Glo-36-R-220v
36 LED/m - Green
14
50m
220v
•
•
•
•
•
AC230
2835
100.00cm
Notes:
1.
2.
3.
Colour temperature of all products is 6500K.
Dimension of all products is 13.5mm wide x 6mm high.
To achieve maximum running length, a power controller needs to be attached to both ends.
New generation lighting
Dynamic Light Wiring
.
INPUT:AC100~240VAC,50-60Hz
OUTPUT:DC36V
The power supply can drive one length or different
lengths within allowed maximum length by feeding
light both ends.
Driver
Notes:
1.
2.
3.
4.
5.
6 mm
6.
Instructions of Dynamic Light Wiring:
Red Wire Connects to Anode (+).
Yellow Wire Connects to Low Color Temperature Connection, Cathode (-).
Black Wire Connects to High Color Temperature Connection, Cathode (-).
This LED Ribbon must be used in conjunction with DC36V power supply.
Always observe proper polarity. Polarity symbols should match on each
component.
Ensure to add 20% buffer when sizing power supply.
Ensure that the power cable carried current is no greater than 80% of
its capacity.
To minimize the voltage drop and keep light consistency, position power
supply nearest to the power feed end of LED Ribbon and keep the power
line as short as possible.
Compatible with RGB controller and DMX control.
1.
2.
3.
4.
5.
6.
7.
8.
13.5mm
Notes:
1.
2.
3.
Appearance of Cover
TT=Transparent PVC Housing1+Transparent Light-emitting Surface2
Housing color is the light color except from the light-emitting surface.
4.
5.
Dimension: 13.5mm wide x 6mm high
Min. bend diameter: 30mm
Protection rate: IP68
The product IP rate is ultimately in line with
properly applied IP rated connectors.
Easy to use, with a range of accessories for
joining, terminating, mounting &powering.
Long life span: 5 years.
Working ambient temperature: -20°C~45°C
Operating (bending) ambient temperature:
0°C~45°C
Light-emitting surface color is the color without light up.
Unless otherwise stated, the tolerance of the light is ±0.3mm.
Recommended Maximum Extension Wire Length
According to Light Power
Watts of
Light
22AWG/
0.34mm2
20AWG/
0.53mm2
18AWG/
0.82mm2
17AWG/
1.04mm2
16AWG/
1.38mm2
14AWG/
2.07mm2
12AWG/
3.29mm2
10AWG/
5.62mm2
10W
36m
60m
100m
120m
140m
240m
400m
600m
20W
18m
30m
50m
60m
70m
120m
200m
300m
30W
12m
20m
30m
38m
45m
80m
130m
200m
40W
8m
15m
22m
28m
35m
60m
95m
140m
50W
6m
12m
18m
22m
28m
48m
75m
105m
60W
5m
10m
15m
18m
22m
36m
60m
88m
70W
/
8m
12m
14m
18m
30m
50m
72m
80W
/
6m
10m
11m
14m
24m
40m
58m
90W
/
4m
7m
8m
10m
18m
30m
45m
100W
/
/
5m
6m
7m
12m
22m
32m
110W
/
/
3m
4m
5m
8m
15m
22m
120W
/
/
2m
2.5m
3m
6m
8m
12m
Notes:
1. The extension wire length should be less than the recommended values.
2. The recommended value excludes the 0.3m cable connected to the front connector.
3. Ensure the reliability of wire connection and avoid wire connection if possible.