• Core made of high density chipboard and thermosetting resins, 38 mm thick.
• Aluminium foil on bottom surface 0.05 mm thick.
• The top surface can be of various covering materials.
• Self-extinguishing and antisqueak ABS edge trim, 0.45 mm thick.
Panels
PLTMB-PLTMM
Covering: Various
Core: Chipboard
b Covering
a
600
c Chipboard core
600
Edge
e
a
Bottom surface
TECHNICAL DATA
Nominal dimension
(mm)
TOP SURFACE
Various
Weight each
Fire
Resistance
Circualr 91
Fire
Resistance
Fire reaction
Electrical
resistance(1)
Acoustic
insulation
Conductivity
λ (core/
cover)
EN 13501
a
b
c
e
kg
REI
REI
CSE/RF
class
Ω
dB
W/m °C
~ 38-40
~ 0.05-2
38
0.05
~11
60
30
1
≤2x1010
≥ 32
0.17
(1) Value for panel with antistatic coverings. For conductive coverings consider 1.5x105 ÷ 1x107. For other coverings please ask Nesite staff.
MECHANICAL CHARACTERISTICS (Deflection ≤2.5 mm; Safety Factor ≥2)
SUBSTRUCTURE
Specification
CONCENTRATED LOAD kN
DISTRIBUTED LOAD kN/m2 (3)
(2)
Working load(5)
MPS
2.00
MPL
2.30
MPM/SSH
2.60
MPH
3.50
BPC
4.00
MPC
4.50
Ultimate load kN(4)
6.50
7.00
7.50
8.00
9.00
10.00
EN 12825
2A2
2A2
2A2
3A2
4A2
5A2
MPS
18.00
MPL
20.00
MPM/SSH
22.00
MPH
26.00
BPC
28.00
MPC
30.00
(2) Load valid at any point of the system.
(3) Not provided by EN 12825.
(4) Ultimate load at the failure moment (tensile strenght).
(5) When the applied load is equivalent to to the working load the measured deflection must not exceed the value declared in accordance with the prospectus.
For Finished Floor Height FFH higher than 750 mm, please verify the real operating condition of the System.
MPS= without stringers, MPL= light stringers, MPM/SSH= medium stringers, MPH/BPC/MPC= high resistance special stringers
Prospectus 1
Legend standard EN 12825
Class
Ultimate load kN
1
2
3
4
5
6
≥4
≥6
≥8
≥9
≥ 10
≥ 12
DEFLECTION CLASS
SAFETY FACTOR
A=2.5 mm
2
B=3.0 mm
3
C=4.0 mm
FIELDS OF APPLICATION:
Offices, EDPs, control rooms, laboratories, with medium
load bearing requirements.
Transpack Group Service S.p.A. reserves the right to change technical data without notice
8
APPLICATION NOTES:
Suitable for homogeneous vinyl, rubber, linoleum, plastic
laminate, carpet and loose lay covering material (PLTMB).
Rev. March 2012