TECHNICAL DATA SHEET
BOSTIK STICKI DOTS
Description
BOSTIK STICKI DOTS are clear, double-sided adhesive dots
that stick to almost anything, including paper, wood, plastic,
metal, glass and painted surfaces
They are a great, invisible and clean alternative to drawing pins, staples or tape, with 101 uses
BOSTIK STICKI DOTS are available in two versions, removable, for non permanent applications, and
extra strength for permanent and heavy duty applications
BOSTIK STICKI DOTS are acid-free and lignin-free
Features & Benefits
•
•
•
•
•
•
Excellent adhesion qualities – sticks to a variety of surfaces
Transparent - Invisible
Acid and lignin free – suitable for photos and scrapbooking
Ready to use – no mixing or activation required
Solvent free - non toxic
Available in REMOVABLE and EXTRA STRENGTH
Applications
•
•
•
•
•
Holding up posters, cards, certificates, notices, maps, menus, calendars, messages, timetables,
learning aids, children paintings, decorations, etc
Keeping in place telephones, mouse pads, pens, candles, figurines, vases, calculators, ornaments,
etc
Keeping picture frames straight
Sticking photos in an album
Ideal for school project, scrap-booking, art and craft projects
Adhesion
BOSTIK STICKI DOTS sticks extremely well to non-porous surfaces such as metal, glass, plastics, vinyl
coated and painted surfaces and porous surfaces such as paper, boards, cloth, and wood.
Limitations
•
•
•
Not suitable for highly absorbent surfaces
Not suitable for holding up heavy objects
May damage fragile papers on removal
Safety instructions
BOSTIK STICKI DOTS is non hazardous and does not cause skin irritation to individuals with normal skin
sensitivity. Keep out of reach of small children
PJ/D181/Issue 04/Sept 2010/Sticki Dots
Page 1 of 2
Next Revision: Sept 2014
TECHNICAL DATA SHEET
Surface preparation
Surfaces should be dry, clean and free of grease and dirt
Directions for use
•
•
•
•
•
Tear along the perforations
Peel off the paper backing
Press the dot on to the surface
you are sticking
Pull off the clear plastic film
Stick the two surfaces together
Cleaning
Remove as much as possible mechanically, then use mineral turpentine to remove residue
Storage stability
The shelf life of the product is indefinite if stored at room temperature
Product packaging
Size:
64 Sticky Dots REMOVABLE in Wallets
64 Sticky Dots EXTRA STRENGTH in Wallets
Product data
Appearance
Clear sticky dots
Solids (%)
100
Water resistance
Very good
Heat Resistance
Softening occurs at elevated temperatures above 50°C
Cold Resistance
Good. Retains elasticity down to - 30oC
The above information is only offered, as a guide to the use of this product. Furthermore, users should satisfy themselves that
it is suitable for their needs. Since we have no control over the conditions under which it is used, we cannot accept
responsibility for problems caused by the use and/or application of this product.
Head Office: +27(0) 21 555 7400
1 Beverley Close, Montague Gardens
PO Box 37008, Chempet, 7442
www.bostik.co.za
PJ/D181/Issue 04/Sept 2010/Sticki Dots
Page 2 of 2
Next Revision: Sept 2014