Schmidt Engineering and Equipment, Inc.
1905 South Moorland Road, New Berlin, WI 53151-2321 USA
Phone 1-262-784-6066 Fax: 1-262-784-6720
Web Site: www.wausau-everest.com Email: [email protected]
WAUSAU HOME SAFE PLOW
MODELS HSP, HSS, AND HW
PARTS
MANUAL
ORIGINAL ISSUE
REV —
SEPTEMBER 24, 2007
This document and all information and expression contained herein are the property of Schmidt Engineering and Equipment,
Inc. It may not be used, duplicated, or disclosed for any purpose without prior written permission of Schmidt Engineering and
Equipment. All rights reserved.
Revision History
Rev
By
Approved
Date
Revision Summary
—
JRJ
AF
September 24, 2007
Initial issue.
This document and all information and expression contained herein are the property of Schmidt Engineering and Equipment,
Inc. It may not be used, duplicated, or disclosed for any purpose without prior written permission of Schmidt Engineering and
Equipment. All rights reserved.
ii
Table of Contents
HOW TO USE THIS MANUAL.................................................................................................................. v
PAGE NUMBER ....................................................................................................................................... v
LOCATING MATERIAL IN THIS MANUAL............................................................................................... v
HOW TO USE THIS ILLUSTRATED PARTS CATALOG ........................................................................ vi
ACRONYMS AND ABBREVIATIONS.....................................................................................................viii
1.
PLOW AND MOLDBOARD ASSEMBLIES........................................................................................1
2.
HOT WING MOLDBOARD ASSEMBLIES ........................................................................................6
2.1
Right Hand - Flared Moldboard Assemblies ............................................................................9
3.
RUBBER AND POLYURETHANE DEFLECTOR KITS ...................................................................12
3.1
Hot Wing Rubber Deflectors ..................................................................................................14
3.1.1 Hot Wing, Straight, Rubber Deflector Kits..............................................................................14
3.1.2 Hot Wing, 90 Degree, Rubber Deflector Kit ...........................................................................16
4.
AIRFOIL (OPTIONAL EQUIPMENT)...............................................................................................19
5.
CASTER WHEEL ASSEMBLIES.....................................................................................................20
5.1
Caster Wheel Assembly.........................................................................................................20
5.2
8” Caster Wheel Assembly ....................................................................................................22
5.3
8” Caster Wheel Assembly, Adjustable..................................................................................24
5.4
10” Caster Wheel Assembly, Adjustable................................................................................26
5.5
8” Caster and Shoe Mounting Kit (15 or 19” Pin Height) .......................................................28
5.6
8” Caster and Shoe Mounting Kit (8” Top Punched C.E., 15 or 19” Pin Height)....................30
5.7
Snow Wheel Kit......................................................................................................................32
6.
MUSHROOM SHOE ASSEMBLIES ................................................................................................34
6.1
Mushroom Shoe Assembly, Bolt Adjustment.........................................................................34
6.2
Mushroom Shoe Assembly, Screw Adjustment .....................................................................36
7.
MOLDBOARD WEAR SHOE KITS..................................................................................................38
8.
LIFT LINK ASSEMBLY ....................................................................................................................40
8.1
Lift Chain Weldment...............................................................................................................41
8.2
Level Lift Kit, Two Chain ........................................................................................................42
8.3
Level Lift Kit, Pulley Block Style.............................................................................................44
8.4
Tension Spring, Lift Chain Assembly (Optional Equipment) ..................................................45
9.
CURB GUARD KIT (OPTIONAL EQUIPMENT) ..............................................................................46
9.1
Parking Stands.......................................................................................................................47
10. CYLINDERS ....................................................................................................................................51
10.1
Reversing Cylinder, Single Acting, Nitride (Optional Equipment) ..........................................51
10.2
Standard Cylinder Parts List ..................................................................................................52
10.3
Reversing Cylinder, Double Acting, Nitride (Optional Equipment).........................................53
11. HYDRAULIC LINE KITS ..................................................................................................................55
This document and all information and expression contained herein are the property of Schmidt Engineering and Equipment,
Inc. It may not be used, duplicated, or disclosed for any purpose without prior written permission of Schmidt Engineering and
Equipment. All rights reserved.
iii
11.1
11.1.1
11.1.2
11.1.3
11.1.4
Hydraulic Line Kit with DA Cylinders and Cushion Valve ......................................................55
Hydraulic Line Kit with DA Cylinders and Cushion Valve Parts List ......................................56
Hydraulic Line Kit with DA Cylinders Parts List......................................................................57
Hydraulic Line Kit with Cushion Valve Mounting Parts List....................................................58
Hydraulic Line Kit with Flow Restrictors.................................................................................59
List of Figures
Figure 1. Home Safe Plow Assembly ......................................................................................................1
Figure 2. Hot Wing Moldboard Assembly ................................................................................................6
Figure 3. Right Hand - Flared Moldboard Assembly................................................................................9
Figure 4. Rubber and Polyurethane Deflector Kits ................................................................................12
Figure 5. Hot Wing, Straight, Rubber Deflector Kits ..............................................................................14
Figure 6. Hot Wing, 90 Degree, Rubber Deflector Kit............................................................................16
Figure 7. Airfoil (Optional Equipment)....................................................................................................19
Figure 8. Caster Wheel Assembly .........................................................................................................20
Figure 9. 8” Caster Wheel Assembly .....................................................................................................22
Figure 10. 8” Caster Wheel Assembly, Adjustable ................................................................................24
Figure 11. 10” Caster Wheel Assembly, Adjustable ..............................................................................26
Figure 12. 8” Caster and Shoe Mounting Kit (15 or 19” Pin Height) ......................................................28
Figure 13. 8” Caster and Shoe Mounting Kit (8” Top Punched, 15 or 19” Pin Height)...........................30
Figure 14. Snow Wheel Mounting Kit.....................................................................................................32
Figure 15. Mushroom Shoe Assembly, Bolt Adjustment........................................................................34
Figure 16. Mushroom Shoe Assembly, Screw Adjustment....................................................................36
Figure 17. Moldboard Wear Shoe Kit.....................................................................................................38
Figure 18. Lift Link Assembly.................................................................................................................40
Figure 19. Lift Chain Weldment .............................................................................................................41
Figure 20. Level Lift Kit, 2-Chain............................................................................................................42
Figure 21. Level Lift Kit, Pulley Block Style............................................................................................44
Figure 22. Tension Spring, Lift Chain Assembly (Optional Equipment).................................................45
Figure 23. Curb Guard Kit......................................................................................................................46
Figure 24. Parking Stand w/Mounting Brackets.....................................................................................47
Figure 25. Parking Stand w/Mounting Brackets (A-Frame) ...................................................................49
Figure 26. Reversing Cylinder, Single Acting, Nitride (Optional Equipment) .........................................51
Figure 27. Reversing Cylinder, Double Acting, Nitride (Optional Equipment)........................................53
Figure 28. Hydraulic Line Kit with DA Cylinders and Cushion Valve .....................................................55
Figure 29. Hydraulic Line Kit with Flow Restrictors................................................................................59
List of Tables
Table 1. Torque Specification Chart ....................................................................................................... vi
This document and all information and expression contained herein are the property of Schmidt Engineering and Equipment,
Inc. It may not be used, duplicated, or disclosed for any purpose without prior written permission of Schmidt Engineering and
Equipment. All rights reserved.
iv
HOW TO USE THIS MANUAL
The documentation for the Schmidt Engineering and Equipment Home Safe Plow is organized by
Volume, Section, Figure (or Subsection), and Page. Below is a brief description:
Volume
Section
1 – Operator’s/Maintenance
Manual
—
Description
Refer to the Table of Contents
for Section Definition and
Content
Safety Notes, How to Use This
Manual, Abbreviations, Index,
and General Information
Plow and Moldboard Assemblies
Hot Wing Moldboard Assemblies
Rubber/Poly Deflector Kits
Air Foil
Caster Wheel Assemblies
Mushroom Shoe Assemblies
Moldboard Wear Shoe Kits
Lift Link Assembly
Curb Guard Kit
Cylinders
Hydraulic Line Kits
—
Introduction
2 – Parts Catalog
1
2
3
4
5
6
7
8
9
10
11
Appendices
PAGE NUMBER
Each section in the manual is numbered separately from the rest of the manual. The model number,
page number, and revision of the manual are located on the lower center of the page in the footer.
LOCATING MATERIAL IN THIS MANUAL
Go to the section that contains the information required. Each section has a detailed table of contents
on the first page. Find the specific subject and page in the table of contents.
This document and all information and expression contained herein are the property of Schmidt Engineering and Equipment,
Inc. It may not be used, duplicated, or disclosed for any purpose without prior written permission of Schmidt Engineering and
Equipment. All rights reserved.
v
HOW TO USE THIS ILLUSTRATED PARTS CATALOG
This Illustrated Parts Catalog has been prepared as a detailed parts guide for the Schmidt Engineering
and Equipment Home Safe Plow. The information in this manual is presented in a generic form and is
intended only for parts illustration. For actual operating/maintenance information, refer to the Operation
and Maintenance manual.
Replaceable items and/or kits for the unit are detailed on illustrations throughout this manual. The item
numbers on the illustration are keyed to each accompanying parts list. The purpose of the item
numbers is to provide complete identification, but should not be used for procurement purposes. Some
components are covered in separate publications furnished by the component manufacturer (e.g.
hydrostatic pump, water pump, etc). These publications are furnished in Appendices and referenced
when required.
NOTES:
Do not use damaged or broken parts. Use only authorized parts and components.
Do not use unapproved lubricants/fluids.
Use at a minimum, Grade 8 attaching hardware except where noted. For installation safety,
substitution of lower grade hardware is NOT recommended or approved.
Table 1. Torque Specification Chart
SAE Grade 8 Bolts
Course Max. Torque Dry
Thread
(lbs-ft)
5/16
25
3/8
45
7/16
70
1/2
110
9/16
150
5/8
220
3/4
380
7/8
600
1.00
900
1-1/8
1,280
1-1/4
1,820
1-3/8
2,380
1-1/2
3,160
Fine Thread
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1.00
1-1/8
1-1/4
1-3/8
1-1/2
Max. Torque Dry
(lbs-ft)
25
50
80
120
170
240
420
660
1,000
1,440
2,000
2,720
3,560
BOLT HEAD
IDENTIFICATION
This document and all information and expression contained herein are the property of Schmidt Engineering and Equipment,
Inc. It may not be used, duplicated, or disclosed for any purpose without prior written permission of Schmidt Engineering and
Equipment. All rights reserved.
vi
This manual uses the indented parts structure. In the descriptive column, the relationship of items
covered is shown by the degree of indention of each item. In the example below, the poly plow
assembly is listed with one indentation. The curb guard weldment, carriage bolt, and hex nut are
indented under the curb guard kit to indicate that these are sub components of the curb guard kit.
Ordering the curb guard kit would automatically include the curb guard weldment, carriage bolt, and hex
nut. Components listed with the same indentation must be ordered separately.
ITEM PART NUMBER
2K-12324
1
2W-12323
2
9C-00077
3
9C-00096
DESCRIPTION
CURB GUARD KIT
• CURB GUARD-WELDMENT
• CARRIAGE BOLT-5/8 NC X 3-1/2 LG
• HEX NUT-5/8 NC
QTY
1
2
6
6
NOTES
•
Item – Identifies part from illustration
•
Part Number – Part number to be used for procurement
•
Description – Part name and relationship to assembly
•
Quantity – Gives quantity required for assembly (see notes about attaching hardware)
•
Notes – Directs user to additional information when ordering
There are three distinct types of figure designations in this manual: Installations identify assemblies and
components related by application such as attaching hardware. These items must be individually
ordered; there is no single part number that includes all parts shown. Assemblies are part listings that
are inclusive of all parts described. When the main assembly is ordered, the sub components are
included as part of the order. The third type of figure is a Listing that contains similar but unrelated
parts. Each part must be ordered separately.
NOTE: If a component is damaged, make repairs immediately. Do not continue to operate
machine.
This document and all information and expression contained herein are the property of Schmidt Engineering and Equipment,
Inc. It may not be used, duplicated, or disclosed for any purpose without prior written permission of Schmidt Engineering and
Equipment. All rights reserved.
vii
ACRONYMS AND ABBREVIATIONS
The following is a list of terms and abbreviations that may appear in description and drawing
nomenclature.
AC
ADJ
AR
ALT
AMP
APPX
ASSY or ASSM
AUX
AWG
CARR
C.E.
CM
CYL
DC
DIA
EA
FHMS
FLG HD
GA
GND
GPM
HHCS
HHMS
HYD
ID
KG
LH
MAX
MISC
MM
NP
NPT
OBS
OD
OEM
PHMS
PLCS
POLY
PSI
PSIA
Alternating Current
Adjustment
As Required
Alternate
Ampere
Approximately
Assembly
Auxiliary
American Wire Gauge
Carriage
Cutting Edge
Centimeter
Cylinder
Direct Current
Diameter
Each
Flat Head Machine Screw
Flange Head
Gage
Ground (electrical)
Gallons Per Minute
Hex Head Cap Screw
Hex Head Machine Screw
Hydraulic
Inside Diameter
Kilograms
Left Hand
Maximum
Miscellaneous
Millimeter
Non Procurable
National Pipe Thread
Obsolete
Outside Diameter
Original Equipment Manufacturer
Pan Head Machine Screw
Places
Polyethylene
Pounds per Square Inch
Pounds per Square Inch Absolute
This document and all information and expression contained herein are the property of Schmidt Engineering and Equipment,
Inc. It may not be used, duplicated, or disclosed for any purpose without prior written permission of Schmidt Engineering and
Equipment. All rights reserved.
viii
PSIG
QTY
RH
RPM
SHCS
SHSS
TYP
WELD’T or WLDMT
Pounds per Square Inch Gauge
Quantity
Right Hand
Revolutions Per Minute
Socket Head Cap Screw
Socket Head Set Screw
Typical
Weldment
This document and all information and expression contained herein are the property of Schmidt Engineering and Equipment,
Inc. It may not be used, duplicated, or disclosed for any purpose without prior written permission of Schmidt Engineering and
Equipment. All rights reserved.
ix
1. PLOW AND MOLDBOARD ASSEMBLIES
Figure 1. Home Safe Plow Assembly
HSP Rev —
1
ITEM
PART NUMBER DESCRIPTION
REF
HOME SAFE PLOW ASSEMBLY
POLYURETHANE MOLDBOARD ASSEMBLIES
2A-10131-01
• MOLDBOARD ASSEMBLY, HSP3610
2W-10128
• MOLDBOARD WELD’T, HSP3610
2A-10169-01
• MOLDBOARD ASSEMBLY, HSP3611
2W-10170
• MOLDBOARD WELD’T, HSP3611
2A-10241-01
• MOLDBOARD ASSEMBLY, HSP3612
2W-10240
• MOLDBOARD WELD’T, HSP3612
2A-16102
• MOLDBOARD ASSEMBLY, HSP3614
2W-16100
• MOLDBOARD WELD’T, HSP3614
2A-10099-01
• MOLDBOARD ASSEMBLY, HSP4210
2W-10100
• MOLDBOARD WELD’T, HSP4210
1
2A-10074-01
• MOLDBOARD ASSEMBLY, HSP4211
2W-10073
• MOLDBOARD WELD’T, HSP4211
2A-10085-01
• MOLDBOARD ASSEMBLY, HSP4212
2W-10086
• MOLDBOARD WELD’T, HSP4212
2A-13725
• MOLDBOARD ASSEMBLY, HSP4214
2W-13726
• MOLDBOARD WELD’T, HSP4214
2A-14894
• MOLDBOARD ASSEMBLY, HSP4811
2W-14892
• MOLDBOARD WELD’T, HSP4811
2A-14980
• MOLDBOARD ASSEMBLY, HSP4812
2W-14489
• MOLDBOARD WELD’T, HSP4812
STEEL MOLDBOARD ASSEMBLIES
1
2A-09821-02
• STEEL MOLDBOARD ASSEMBLY, HSS3610
2W-09882
• MOLDBOARD WELD’T, HSS3610
• STEEL MOLDBOARD ASSEMBLY, CUT
2A-16355
BACK, HSS3611
2W-16350
• MOLDBOARD WELD’T, HSS3611
2A-09894-01
• STEEL MOLDBOARD ASSEMBLY, HSS3611
2W-09867
• MOLDBOARD WELD’T, HSS3611
2A-10238-01
• STEEL MOLDBOARD ASSEMBLY, HSS3612
2W-10237
• MOLDBOARD WELD’T, HSS3612
2A-10116-01
• STEEL MOLDBOARD ASSEMBLY, HSS4210
2W-10117
• MOLDBOARD WELD’T, HSS4210
2A-09894-02
• STEEL MOLDBOARD ASSEMBLY, HSS4211
2W-09890
• MOLDBOARD WELD’T, HSS4211
2A-14487
• STEEL MOLDBOARD ASSEMBLY, HSS4211
2W-14486
• MOLDBOARD WELD’T, HSS4211
2A-10094-01
• STEEL MOLDBOARD ASSEMBLY, HSS4212
2W-10095
• MOLDBOARD WELD’T, HSS4212
2A-14490
• STEEL MOLDBOARD ASSEMBLY, HSS4212
2W-14489
• MOLDBOARD WELD’T, HSS4212
2A-15192
• STEEL MOLDBOARD ASSEMBLY, HSS4213
HSP Rev —
2
QTY
1
1
—
1
—
1
—
1
—
1
—
1
—
1
—
1
—
1
—
1
—
1
—
1
—
1
—
1
—
1
—
1
—
1
—
1
—
1
—
1
NOTES
ITEM
PART NUMBER
2W-15193
2A-13966
2W-13965
CUTTING EDGE KITS
2
2K-03483-002
2K-03405-002
2P-01297
2P-01297-02
2P-04352
2P-02066
2P-02066-02
2P-02066-03
2K-03483-003
2K-03405-003
2P-04384-002
2P-10058
2P-04384
2P-02038-001
2P-02038-002
2P-02038-003
2K-03483-004
2K-03405-004
2P-10093
2P-14146
2P-06712
2P-02170
2P-02170-02
DESCRIPTION
• MOLDBOARD WELD’T, HSS4213
• STEEL MOLDBOARD ASSEMBLY, HSS4214
• MOLDBOARD WELD’T, HSS4214
• 10’ CARBIDE C.E. 3/4 X 6” X (2-3’, 1-4’)
• 10’ RUBBER C.E. 1-1/2 X 10’ (SLOTTED)
• 10’ STEEL C.E. 1/2 X 8" X 10' (CENTER
PUNCHED)
• 10’ STEEL C.E. 5/8 X 8" X 10' (CENTER
PUNCHED)
• 10’ STEEL C.E. 3/4 X 8" X 10' (CENTER
PUNCHED)
• 10’ STEEL C.E. 1/2 X 6" X 10' (TOP
PUNCHED)
• 10’ STEEL C.E. 5/8 X 6" X 10' (TOP
PUNCHED)
• 10’ STEEL C.E. 3/4 X 6" X 10' (TOP
PUNCHED)
• 11’ CARBIDE C.E. 3/4 X 6” X (1-3’, 2-4’)
• 11’ RUBBER C.E. 1-1/2 X 11’ (SLOTTED)
• 11’ STEEL C.E. 1/2 X 8" X 11' (CENTER
PUNCHED)
• 11’ STEEL C.E. 5/8 X 8" X 11' (CENTER
PUNCHED)
• 11’ STEEL C.E. 3/4 X 8" X 11' (CENTER
PUNCHED)
• 11’ STEEL C.E. 1/2 X 6" X 11' (TOP
PUNCHED)
• 11’ STEEL C.E. 5/8 X 6" X 11' (TOP
PUNCHED)
• 11’ STEEL C.E. 3/4 X 6" X 11' (TOP
PUNCHED)
• 12’ CARBIDE C.E. 3/4 X 6” X (2-3’, 2-4’)
• 12’ RUBBER C.E. 1-1/2 X 12’ (SLOTTED)
• 12’ STEEL C.E. 1/2 X 8" X 12' (CENTER
PUNCHED)
• 12’ STEEL C.E. 5/8 X 8" X 12' (CENTER
PUNCHED)
• 12’ STEEL C.E. 3/4 X 8" X 12' (CENTER
PUNCHED)
• 12’ STEEL C.E. 1/2 X 6" X 12' (TOP
PUNCHED)
• 12’ STEEL C.E. 5/8 X 6" X 12' (TOP
PUNCHED)
HSP Rev —
3
QTY
—
1
—
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
NOTES
ITEM
PART NUMBER
DESCRIPTION
• 12’ STEEL C.E. 3/4 X 6" X 12' (TOP
2P-02170-03
PUNCHED)
2K-03483-005
• 14’ CARBIDE C.E. 3/4 X 6” X (2-3’, 2-4’)
2K-03405-020
• 14’ RUBBER C.E. 1-1/2 X 14’ (SLOTTED)
• 14’ STEEL C.E. 1/2 X 8" X 14' (CENTER
2P-13731
PUNCHED)
• 14’ STEEL C.E. 5/8 X 8" X 14' (CENTER
2P-13731-01
PUNCHED)
• 14’ STEEL C.E. 1/2 X 6" X 14' (TOP
2P-02594
PUNCHED)
• 14’ STEEL C.E. 3/4 X 6" X 14' (TOP
2P-02594-03
PUNCHED)
POLYURETHANE MOLDBOARD SHEETS
2P-10130
• POLY MOLDBOARD SHEET - HSP3610
2P-10171
• POLY MOLDBOARD SHEET - HSP3611
2P-10239
• POLY MOLDBOARD SHEET - HSP3612
2P-16103
• POLY MOLDBOARD SHEET - HSP3614
2P-10102
• POLY MOLDBOARD SHEET - HSP4210
3
2P-10075
• POLY MOLDBOARD SHEET - HSP4211
2P-10088
• POLY MOLDBOARD SHEET - HSP4212
2P-13728
• POLY MOLDBOARD SHEET - HSP4214
2P-14893
• POLY MOLDBOARD SHEET - HSP4811
2P-14978
• POLY MOLDBOARD SHEET - HSP4812
TRIP EDGE WELDMENTS
• HINGE, TRIP EDGE WLDMT, HSP3610,
2W-09825
HSP4210
• HINGE, TRIP EDGE WLDMT, HSP3611,
2W-09871
HSP4211, AND HSP4811
4
• HINGE, TRIP EDGE WLDMT, HSP3612,
2W-10080
HSP4212, AND HSP4812
• HINGE, TRIP EDGE WLDMT, HSP3614,
2W-13727
HSP4214
5
9C-07057
• SPRING-TRIP
6
2P-09841
• KEEPER, SPRING
7
9C-01198
• BOLT, CARRIAGE, 5/8 NC X 2-1/2 LG
8
9C-00265
• HHCS, 5/8 NC X 2-3/4 LG GR8
9
9C-07123
• HHCS, 5/8 NC X 5" LG FULL THD
10
9C-00645
• NUT, 5/8 NC ELASTIC STOP
11
2P-09591
• WASHER, PIVOT
12
9C-00141
• LOCK WASHER, 3/4
13
9C-00282
• HHCS, 3/4 NC X 1-3/4" LG GR8
14
2W-09865
• TRUSS, FRAME WELDMENT
15
2W-09885
• A-FRAME OSCILLATING WELDMENT
HSP Rev —
4
QTY
NOTES
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
AR
AR
AR
2
AR
AR
1
1
1
1
1
1.
ITEM
16
17
PART NUMBER
2W-14596
4P-06880
2W-09866
2W-10200
18
2W-11184
2W-10175
2W-14394
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
9C-07108
2P-09863
2P-09864
9C-00237
9C-00137
9C-00737
9C-00579
9C-02326
9C-07062
9C-00652
2P-09835
2P-09876
2P-10092
2P-13730
9C-00167
9C-00168
9C-00582
9C-00587
9C-01086
2P-14598
2P-10103
2P-10076
2P-10089
2P-13729
9C-00139
9C-00096
9C-00073
DESCRIPTION
• HINGE PIN WELDMENT
• WASHER 1-9/16
• BRACE, WELDMENT, 17.50” – HOLE
CENTER DISTANCE
• BRACE, WELDMENT, 18.44” – HOLE
CENTER DISTANCE
• BRACE, WELDMENT, 19.50” – HOLE
CENTER DISTANCE
• BRACE, WELDMENT, 20.50” – HOLE
CENTER DISTANCE
• BRACE, WELDMENT, 21.06” – HOLE
CENTER DISTANCE
• CYLINDER, S.A. REVERSING
• PIN, BRACE 1-1/8" X 6-1/2" LG
• PIN, DRIVE FRAME 1-1/4" X 8-5/8" LG
• HHCS, 1/2 NC X 1-1/4" LG
• LOCKWASHER 1/2
• CASTLE NUT, 1-1/2" NC
• COTTER PIN, 1-1/4 X 3-1/2
• HHCS, 1-1/4 NC X 6" LG GR8
• HHCS, 1-1/4 NC X 8" LG GR8
• NUT, 1-1/4 NC, ELASTIC STOP
• 10' HINGE TUBE
• 11' HINGE TUBE
• 12' HINGE TUBE
• 14' HINGE TUBE
• FLAT WASHER 1-1/8"
• FLAT WASHER 1-1/4"
• COTTER PIN 5/16" X 2-1/2" LG
• COTTER PIN 3/8" X 2-1/2" LG
• GREASE FITTING 1/8 NPT
• BUSHING
• 10' KEEPER ANGLE
• 11' KEEPER ANGLE
• 12' KEEPER ANGLE
• 14' KEEPER ANGLE
• LOCKWASHER 5/8
• NUT, 5/8 NC HEX
• BOLT, CARRIAGE, 5/8 NC X 2" LG GR8
NOTE:
1. Includes Bushing, Item 35
2. Used on polyurethane plows only
HSP Rev —
5
QTY
1
1
NOTES
2
2
2
2
2
2
4
4
1
1
1
1
2
2
4
1
1
1
1
8
8
8
8
1
2
1
1
1
1
AR
AR
AR
2.
2. HOT WING MOLDBOARD ASSEMBLIES
Figure 2. Hot Wing Moldboard Assembly
HSP Rev —
6
ITEM PART NUMBER
DESCRIPTION
POLYURETHANE HOT WING MOLDBOARD ASSEMBLIES
2A-12737
HOT WING MOLDBOARD ASSM, HSP4211
2W-12733
• WELD'T, HSP4211 POLY PLOW
2A-12649
HOT WING MOLDBOARD ASSM, HSP4212
2W-12454
• WELD'T, HSP4212 POLY PLOW
2A-14766
HOT WING MOLDBOARD ASSM, HSP4214
2W-14765
• WELD'T, HSP4214 POLY PLOW
2A-14732
HOT WING MOLDBOARD ASSM, HSP4811
1
2W-14731
• WELD'T, HSP4811 POLY PLOW
2A-14885
HOT WING MOLDBOARD ASSM, HSP4812
2W-14882
• WELD'T, HSP4812 POLY PLOW
2A-14096
HOT WING MOLDBOARD ASSM, HSP5611
2W-14045
• WELD'T, HSP5611 POLY PLOW
2A-14510
HOT WING MOLDBOARD ASSM, HSP5612
2W-14507
• WELD'T, HSP5612 POLY PLOW
STEEL HOT WING MOLDBOARD ASSEMBLIES
1
2A-13200
HOT WING MOLDBOARD ASSM, HSS4211
2W-13143
• WELD'T, HSS4211 STEEL PLOW
2A-13217
HOT WING MOLDBOARD ASSM, HSS4212
2W-13154
• WELD'T, HSS4212 STEEL PLOW
TRIP EDGE WELDMENT
• WELD’T HINGE,TRIP EDGE, HSP4211,
2W-09871
HSS4211, HSP4811, HSP5611
• WELD’T HINGE,TRIP EDGE, HSP4212,
2
2W-10080
HSS4212, HSP4812
2W-13727
• WELD’T HINGE,TRIP EDGE, HSP4214
2W-14502
• WELD’T HINGE,TRIP EDGE, HSP5612
• TUBE HINGE, HSP4211, HSS4211,
2P-09876
HSP4811, HSP5611
3
• TUBE HINGE, HSP4212, HSS4212,
2P-10092
HSP4812, HSP5612
2P-13730
• TUBE HINGE, HSP4214
4
2P-09841
• KEEPER, SPRING
5
—
• —
6
9C-07057
• SPRING
7
9C-07123
• HHCS, 5/8 NC X 5" LG GR8
8
9C-00265
• HHCS, 5/8-11 UNC X 2-3/4 LG
9
—
• —
10
9C-00645
• NYLOCK NUT 5/8-11 UNC
POLY MOLDBOARD SHEET, CENTER
11
2P-12740
• POLY MOLDBOARD SHEET, HSP4211
• POLY MOLDBOARD SHEET, HSP4212,
2P-12462
HSP4214
HSP Rev —
7
QTY
1
—
1
—
1
—
1
—
1
—
1
—
1
—
1
—
1
—
1
1
1
1
1
1
1
AR
—
AR
AR
2
—
AR
1
1
NOTES
• POLY MOLDBOARD SHEET, HSP4811
• POLY MOLDBOARD SHEET, HSP4812
• POLY MOLDBOARD SHEET, HSP5611,
2P-14097
HSP5612
LEFT HAND POLYURETHANE SHEET
2P-12738
• POLY SHEET – LH, HSP4211
2P-12648
• POLY SHEET – LH, HSP4212
2P-14771
• POLY SHEET – LH, HSP4214
12
2P-14734
• POLY SHEET – LH, HSP4811
2P-14883
• POLY SHEET – LH, HSP4812
2P-14099
• POLY SHEET – LH, HSP5611
2P-14508
• POLY SHEET – LH, HSP5612
RIGHT HAND POLYURETHANE SHEET
2P-12739
• POLY SHEET – RH, HSP4211
2P-12650
• POLY SHEET – RH, HSP4212
2P-14772
• POLY SHEET – RH, HSP4214
13
2P-14735
• POLY SHEET – RH, HSP4811
2P-14884
• POLY SHEET – RH, HSP4812
2P-14098
• POLY SHEET – RH, HSP5611
2P-14509
• POLY SHEET – RH, HSP5612
• KEEPER ANGLE, HSP4211, HSP4811,
2P-10076
HSP5611
2P-10089
14
• KEEPER ANGLE, HSP4212, HSP4812
2P-14770
• KEEPER ANGLE, HSP4214
2P-14511
• KEEPER ANGLE, HSP5612
15
9C-01198
• BOLT, CARR 5/8 NC X 2-1/2 LG GR8
16
9C-00073
• BOLT, CARR 5/8 NC X 2 LG GR8
17
9C-00096
• NUT, HEX 5/8 NC
18
9C-00139
• WASHER, LOCK 5/8"
2P-14733
2P-15057
NOTE:
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
AR
AR
AR
AR
Items 10 through 18 are not used on Steel Moldboard Assemblies.
HSP Rev —
8
2.1 Right Hand - Flared Moldboard Assemblies
Figure 3. Right Hand - Flared Moldboard Assembly
HSP Rev —
9
ITEM PART NUMBER
DESCRIPTION
POLYURETHANE MOLDBOARD ASSEMBLIES
• RH FLARED POLY MOLDBOARD
2A-12742
ASSEMBLY, HSP4211
2W-12741
• WELDMENT - HSP4211 POLY PLOW
• RH FLARED POLY MOLDBOARD
2A-12747
ASSEMBLY, HSP4212
2W-12746
• WELDMENT - HSP4212 POLY PLOW
1
• RH FLARED POLY MOLDBOARD
2A-15135
ASSEMBLY, HSP4811
2W-15136
• WELDMENT - HSP4811 POLY PLOW
• RH FLARED POLY MOLDBOARD
2A-15054
ASSEMBLY, HSP4812
2W-15055
• WELDMENT - HSP4812 POLY PLOW
STEEL MOLDBOARD ASSEMBLIES
• RH FLARED STEEL MOLDBOARD
2A-15975
ASSEMBLY, HSS4211
2W-15974
• WELDMENT – HSS4211 STEEL PLOW
• RH FLARED STEEL MOLDBOARD
2A-14790
ASSEMBLY, HSS4212
2W-14791
• WELDMENT – HSS4212 STEEL PLOW
TRIP EDGE WELDMENT
• WELDMENT, HINGE, TRIP EDGE,
2W-09871
HSP4211, HSP4811, HSS4211
2
• WELDMENT, HINGE, TRIP EDGE,
2W-10080
HSP4212, HSP4811, HSS4212
• TUBE, HINGE, HSP4211, HSP4811,
2P-09876
HSS4211
3
• TUBE, HINGE, HSP4212, HSP4812,
2P-10092
HSS4212
4
2P-09841
• KEEPER, SPRING
5
—
• —
6
9C-07057
• SPRING
7
9C-07123
• HHCS, 5/8 NC X 5" LG FULL THD GR8
8
9C-00265
• HHCS, 5/8 NC X 2.75" LG GR8
9
—
• —
10
9C-00645
• NUT, ELASTIC STOP, 5/8 NC
POLYURETHANE SHEETS
2P-12745
• POLY SHEET, STRAIGHT, HSP4211
2P-12749
• POLY SHEET, STRAIGHT, HSP4212
11
2P-15137
• POLY SHEET, MAIN, HSP4811
2P-15056
• POLY SHEET, LH, HSP4812
12
2P-12739
• POLY SHEET, RH, HSP4211
2P-12650
• POLY SHEET, RH, HSP4212
HSP Rev —
10
QTY
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
AR
—
AR
AR
2
—
AR
1
1
1
1
1
1
NOTES
13
14
15
16
17
2P-14735
2P-14884
2P-10076
2P-10089
9C-01198
9C-00073
9C-00096
9C-00139
NOTE:
•
•
•
•
•
•
•
•
POLY SHEET, RH, HSP4811
POLY SHEET, RH, HSP4812
KEEPER ANGLE, HSP4211, HSP4811
KEEPER ANGLE, HSP4212, HSP4812
BOLT, CARR, 5/8 NC X 2-1/2 LG GR8
BOLT, CARR, 5/8 NC X 2 LG GR8
NUT - HEX, 5/8 NC
WASHER - LOCK, 5/8"
1
1
1
1
AR
AR
AR
AR
Items 11 through 17 are not used on Steel Moldboard Assemblies.
HSP Rev —
11
3. RUBBER AND POLYURETHANE DEFLECTOR KITS
Figure 4. Rubber and Polyurethane Deflector Kits
HSP Rev —
12
ITEM PART NUMBER
DESCRIPTION
RUBBER DEFLECTOR KITS
2K-09893-01
10FT RUBBER DEFLECTOR KIT
2K-09893-02
11FT RUBBER DEFLECTOR KIT
2K-12141-02
11FT RUBBER DEFLECTOR KIT
2K-09893-03
12FT RUBBER DEFLECTOR KIT
2K-09893-05
10FT RUBBER DEFLECTOR KIT
2K-09893-14
10FT RUBBER DEFLECTOR KIT
2K-09893-04
11FT RUBBER DEFLECTOR KIT
2K-09893-13
11FT RUBBER DEFLECTOR KIT
2K-09893-06
12FT RUBBER DEFLECTOR KIT
2K-09893-08
12FT RUBBER DEFLECTOR KIT
2K-09893-09
14FT RUBBER DEFLECTOR KIT
POLYURETHANE DEFLECTOR KITS
2K-14638-01
10FT POLYURETHANE DEFLECTOR KIT
2K-14638-02
11FT POLYURETHANE DEFLECTOR KIT
2P-09836
• KEEPER PLATE, 10 FT
2P-09889
• KEEPER PLATE, 11FT
1
2P-10083
• KEEPER PLATE, 12FT
2P-15153
• KEEPER PLATE, 11FT
2P-13737
• KEEPER PLATE, 14FT
RUBBER DEFLECTORS
2P-09838
• RUBBER DEFLECTOR, 10FT
2P-09875
• RUBBER DEFLECTOR, 11FT
2P-10084
• RUBBER DEFLECTOR, 12FT
2
2P-15436
• RUBBER DEFLECTOR, 10FT
2P-13118
• RUBBER DEFLECTOR, 12FT
2P-13738
• RUBBER DEFLECTOR, 14FT
POLYURETHANE DEFLECTORS
2P-14637
• POLY DEFLECTOR, 10FT
2P-15488
• POLY DEFLECTOR, 11FT
2P-11896
• DEFLECTOR MOUNTING ANGLE, 10FT
3
2P-11857
• DEFLECTOR MOUNTING ANGLE, 11FT
2P-12289
• DEFLECTOR MOUNTING ANGLE, 12FT
2P-13739
• DEFLECTOR MOUNTING ANGLE, 14FT
4
9C-00240
• HHCS 1/2-13 UNC X 2 LG
5
9C-00643
• NYLOCK NUT 1/2-13 UNC
6
REF
• PLOW ASSY
NOTE:
QTY
NOTES
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
AR
AR
1
Due to similarity, illustration shown is the 12’, 90 degree, Rubber Deflector Kit.
HSP Rev —
13
3.1 Hot Wing Rubber Deflectors
3.1.1 Hot Wing, Straight, Rubber Deflector Kits
Figure 5. Hot Wing, Straight, Rubber Deflector Kits
HSP Rev —
14
ITEM
PART NUMBER
2K-15776
1
2
3
4
5
6
2P-15777
2P-15778
2P-15779
2P-15780
9C-00240
9C-00643
DESCRIPTION
HOT WING, RUBBER DEFLECTOR KIT,
STRAIGHT, HSP4211, HSP4212
• RUBBER DEFLECTOR, CENTER
• RUBBER DEFLECTOR, END
• RETAINING BAR, CENTER
• RETAINING BAR, END
• HHCS-1/2 NC X 2 GR8
• NUT, NYLOCK -1/2 NC
HSP Rev —
15
QTY
1
1
2
1
2
12
12
NOTES
3.1.2 Hot Wing, 90 Degree, Rubber Deflector Kit
Figure 6. Hot Wing, 90 Degree, Rubber Deflector Kit
HSP Rev —
16
ITEM
PART NUMBER
2K-12625
2K-14782
2K-14180
2K-12895
2K-12900
1
2
3
2P-12827
2P-12896
2P-12898
2P-12828
2P-14783
2P-12829
2P-12830
2P-14184
4
2P-12905
2P-12906
2P-12831
5
2P-14784
2P-14185
2P-12870
2P-14785
2P-14186
6
2P-14187
2P-12897
2P-12899
7
8
9C-00240
9C-00643
DESCRIPTION
HOT WING, RUBBER DEFLECTOR KIT, 90°
HSP4211, HSP4212
HOT WING, RUBBER DEFLECTOR KIT, 90°
HSP4214
HOT WING, RUBBER DEFLECTOR KIT, 90°
HSP5611, HSP5212
RH FLARED, RUBBER DEFLECTOR KIT,
11FT
RH FLARED, RUBBER DEFLECTOR KIT,
12FT
• CENTER ANGLE
• CENTER ANGLE, RH FLARED, 11FT
• CENTER ANGLE, RH FLARED, 12FT
• END ANGLE, LH, HSP4211, HSP4212
• END ANGLE, LH, HSP4214
• END ANGLE, RH
• RETAINING BAR, CENTER, HSP4211,
HSP4212, HSP4214
• RETAINING BAR, CENTER, HSP5611,
HSP5612
• RETAINING BAR, CENTER, RH
FLARED11FT
• RETAINING BAR, CENTER, RH
FLARED12FT
• RETAINING BAR, END, HSP4211,
HSP4212, RH FLARED 11FT, 12FT
• RETAINING BAR, END, HSP4214
• RETAINING BAR, END, HSP5611,
HSP5612
• RUBBER DEFLECTOR, HSP4211,
HSP4212
• RUBBER DEFLECTOR, HSP4214
• RUBBER DEFLECTOR, HSP5611,
HSP5612
• RUBBER DEFLECTOR END, HSP5611,
HSP5612
• RUBBER DEFLECTOR, RH FLARED,
11FT
• RUBBER DEFLECTOR, RH FLARED,
12FT
• HHCS-1/2 NC X 2 GR8
• NUT, NYLOCK -1/2 NC
NOTE:
1. Not used with HSP5611 and HSP5612
HSP Rev —
17
QTY
NOTES
1
1
1
1
1
1
1
2
1
1
1
1
1
2
1
1
1
1
1
2
1
1
AR
AR
1.
2.
3.
2. Not used with HSP5611 and HSP5612
3. Not used with HSP4214, HSP5611 and HSP5612
HSP Rev —
18
4. AIRFOIL (OPTIONAL EQUIPMENT)
Figure 7. Airfoil (Optional Equipment)
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART NUMBER
2K-15581
2P-15577
2P-15578
2P-15579
2P-15580
2P-16016
9C-00240
9C-00643
9C-00212
9C-00641
2P-16017
2P-16018
2P-16019
2P-15578-01
2P-15582
4P-00953-030
4P-00953-031
4P-00953-032
4P-00953-033
2P-16367
2P-16368
DESCRIPTION
AIRFOIL MOUNTING KIT
• AIRFOIL, 11'
• RIB
• MOUNTING ANGLE
• RETAINING STRAP
• RETAINING STRAP
• HHCS - 1/2NC X 2" LG.
• NUT - ELASTIC STOP, 1/2NC
• HHCS - 3/8NC X 2" LG.
• NUT - ELASTIC STOP, 3/8NC
• RETAINING STRAP
• MOUNTING ANGLE
• MOUNTING ANGLE
• RIB, INNER
• MOUNTING BAR
• ANGLE, 4 X 4 X 3/8 X 33-7/16 LG
• ANGLE, 4 X 4 X 3/8 X 21-7/16 LG
• ANGLE, 4 X 4 X 3/8 X 17-15/16 LG
• ANGLE, 4 X 4 X 3/8 X 2-3/16 LG
• GUSSET, FRONT
• GUSSET, BACK
HSP Rev —
19
QTY
1
1
2
1
2
2
18
18
36
36
1
1
2
4
1
1
2
2
4
2
2
NOTES
5. CASTER WHEEL ASSEMBLIES
5.1 Caster Wheel Assembly
Figure 8. Caster Wheel Assembly
HSP Rev —
20
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
PART NUMBER
2A-00674
2A-00686
2A-00268
2W-00254
2W-00257
2W-00673
2P-00266
2P-03337-002
2P-00382
2P-00677
2P-00679
2P-00680
9C-00671
9C-01086
9C-00520
9C-01375
DESCRIPTION
CASTER WHEEL ASSEMBLY
• RUBBER WHEEL ASSEMBLY
• ADJUSTING SCREW ASSEMBLY
• OUTER TUBE WELDMENT
• SCREW LOCK NUT WELDMENT
• INNER TUBE WELDMENT
• THRUST BEARING
• STOP
• SPACER TUBING
• SPACER
• SPACER
• SPACER
• ELASTIC STOP NUT 1” NF
• ALEMITE FITTING 1/8” STRAIGHT
• HHCS 1” NF X 8
• RAW STOCK PIN
HSP Rev —
21
QTY
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
NOTES
5.2 8” Caster Wheel Assembly
Figure 9. 8” Caster Wheel Assembly
HSP Rev —
22
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART NUMBER
2A-00267
2A-00236
2A-00268-002
2P-00259
2P-00261
2P-00265
2P-00266
2W-00254
2W-00257
2W-00263
9C-00117
9C-00139
9C-00294
9C-00451
9C-00562
9C-00647
9C-01085
9C-01086
9C-01167
DESCRIPTION
8” CASTER WHEEL ASSEMBLY
• 8" CASTER WHEEL ASS'Y
• ADJUSTING SCREW
• SPRING
• SCREW HANDLE
• SPACER
• THRUST BEARING
• OUTER TUBE-WELD'T
• LOCK NUT-WELD'T
• INNER TUBE-WELD'T
• HEX NUT 5/8NF
• LOCK WASHER 5/8
• HHCS-3/4 NC X 5-1/2 LG GR8
• HHCS-5/8 NF X 2-1/4 LG GR8
• PIN COTTER 1/8 X 1-1/2 LG
• NUT ELASTIC STOP 3/4 NC
• GREASE FITTING 1/4-28 ALEMITE
• GREASE FITTING 1/8 NPT ALEMITE
• PIN-ROLL 5/16 X 2 LG
HSP Rev —
23
QTY
2
1
1
1
1
1
1
1
1
1
4
4
1
4
1
1
1
1
1
NOTES
5.3 8” Caster Wheel Assembly, Adjustable
Figure 10. 8” Caster Wheel Assembly, Adjustable
HSP Rev —
24
ITEM
1
2
3
4
5
6
7
8
9
PART NUMBER
2A-00267
2A-00236
2W-00229
9C-00117
9C-00139
9C-00294
9C-00451
9C-00647
9C-01085
9C-01086
DESCRIPTION
8” CASTER WHEEL ASSEMBLY
• 8" CASTER WHEEL ASS'Y
• TUBE WELD'T
• HEX NUT 5/8 NF
• LOCK WASHER 5/8
• HHCS-3/4 NC X 5-1/2 LG GR8
• HHCS-5/8 NF X 2-1/4 LG GR8
• NUT ELASTIC STOP 3/4 NC
• GREASE FITTING 1/4-28 ALEMITE
• GREASE FITTING 1/8 NPT ALEMITE
HSP Rev —
25
QTY
2
1
1
4
4
1
4
1
1
1
NOTES
5.4 10” Caster Wheel Assembly, Adjustable
Figure 11. 10” Caster Wheel Assembly, Adjustable
HSP Rev —
26
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
PART NUMBER
2A-03086-001
2A-03080
2A-00268-002
2P-00259
2P-00261
2P-00265
2P-00266
2W-00254
2W-00257
2W-03082
9C-00117
9C-00139
2P-03085
9C-00451
9C-00562
9C-00757
9C-01085
9C-01086
9C-01167
9C-00571
DESCRIPTION
10” CASTER WHEEL ASSEMBLY
• 10" CASTER WHEEL & BEARING ASSM
• ADJUSTING SCREW
• SPRING
• SCREW HANDLE
• SPACER
• THRUST BEARING
• OUTER TUBE-WELD'T
• LOCK NUT-WELD'T
• INNER TUBE-WELD'T
• HEX NUT 5/8 NF
• LOCK WASHER 5/8
• SHAFT
• HHCS-5/8 NF X 2-1/4 LG GR8
• PIN COTTER 1/8 X 1-1/2 LG
• NUT-HEX CASTLE 1-1/4 NF
• GREASE FITTING 1/4-28 ALEMITE
• GREASE FITTING 1/8 NPT ALEMITE
• PIN-ROLL 5/16 X 2 LG
• PIN-COTTER 3/16 X 2-1/2
HSP Rev —
27
QTY
2
1
1
1
1
1
1
1
1
1
4
4
1
4
1
1
1
1
1
NOTES
5.5 8” Caster and Shoe Mounting Kit (15 or 19” Pin Height)
Figure 12. 8” Caster and Shoe Mounting Kit (15 or 19” Pin Height)
HSP Rev —
28
ITEM
PART NUMBER
2W-09957
2W-09957-01
1
2
3
4
REF
2W-09865
2W-09885
2W-09886
5
REF
6
7
8
2W-10200
2P-09956
8P-00584-010
DESCRIPTION
MOUNTING KIT SHOES AND WHEELS
(19” PIN HEIGHT)
MOUNTING KIT SHOES AND WHEELS
(15” PIN HEIGHT)
• WELD'T-MOLDBOARD
• WELD'T-TRUSS FRAME
• WELD'T-A-FRAME, OSCILLATING
• WELD'T-OSCILLATING BEAM
• BOLT ADJ. MUSHROOM SHOE OR
WHEEL
• ARM
• PLATE-ADJUSTING MUSHROOM SHOE
• 3/8" ROUND
NOTE:
1. Refer to specific purchase order for equipment options.
HSP Rev —
29
QTY
NOTES
1
1
REF
REF
REF
REF
1.
REF
1.
REF
2
2
1.
5.6 8” Caster and Shoe Mounting Kit (8” Top Punched C.E., 15 or 19” Pin Height)
Figure 13. 8” Caster and Shoe Mounting Kit (8” Top Punched, 15 or 19” Pin Height)
HSP Rev —
30
ITEM
PART NUMBER
2K-15274
1
2
3
4
REF
2W-15275-01
2W-15275-02
REF
DESCRIPTION
MOUNTING KIT SHOES AND WHEELS (8”
TOP PUNCHED C.E., 15 OR 19” PIN HEIGHT)
• 8" CASTER WHEEL ASSEMBLY
• MOUNTING WELDMENT, LH
• MOUNTING WELDMENT, RH
• HOMESAFE PLOW
NOTE:
1. Refer to specific purchase order for equipment options.
HSP Rev —
31
QTY
NOTES
1
REF
1
1
REF
1.
1.
5.7 Snow Wheel Kit
Figure 14. Snow Wheel Mounting Kit
HSP Rev —
32
ITEM
1
2
3
4
5
6
7
8
9
PART NUMBER
2K-13212
9C-06625
2P-13214-01
2P-13214-02
2P-13213
9C-00262
9C-00096
9C-00139
2P-15673
—
DESCRIPTION
SNOW WHEELS MOUNTING KIT
• SNOW WHEELS #6509
• MOUNTING PLATE, LH
• MOUNTING PLATE, RH
• GUSSET
• HHCS-5/8 NC X 2 LG, GR8
• NUT, HEX-5/8 NC
• LOCKWASHER-5/8
• GUSSET
• HOMESAFE PLOW
NOTE:
1. Refer to specific purchase order for equipment options.
HSP Rev —
33
QTY
1
2
1
1
2
8
8
8
2
REF
NOTES
1.
6. MUSHROOM SHOE ASSEMBLIES
6.1 Mushroom Shoe Assembly, Bolt Adjustment
Figure 15. Mushroom Shoe Assembly, Bolt Adjustment
HSP Rev —
34
ITEM
1
2
3
4
5
6
7
PART NUMBER
2A-00222
2P-00227
2W-00223
9C-01188
9C-00139
9C-00096
9C-00451
9C-00117
DESCRIPTION
MUSHROOM SHOE ASSEMBLY, BOLT ADJ
• MUSHROOM SHOE
• TUBE WELD'T
• PLOW BOLT 5/8 NC X 2
• LOCK WASHER 5/8
• NUT, HEX 5/8 NC
• HHCS-5/8 NF X 2-1/4 LG GR8
• HEX NUT 5/8 NF
HSP Rev —
35
QTY
2
1
1
2
6
2
4
4
NOTES
6.2 Mushroom Shoe Assembly, Screw Adjustment
Figure 16. Mushroom Shoe Assembly, Screw Adjustment
HSP Rev —
36
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART NUMBER
2A-00244
2P-00227
2A-00251
2P-00259
2P-00261
2P-00260
2P-00262
2W-00254
2W-00257
2W-00250
9C-00117
9C-00139
9C-01188
9C-00451
9C-00562
2P-01824
9C-01085
9C-00576
9C-01167
2W-00245
9C-00096
DESCRIPTION
MUSHROOM SHOE ASSEMBLY, BOLT ADJ
• MUSHROOM SHOE
• ADJUSTING SCREW
• SPRING
• SCREW HANDLE
• SPACER
• PIVOT PIN
• OUTER TUBE-WELD'T
• LOCK NUT-WELD'T
• INNER TUBE-WELD'T
• HEX NUT 5/8 NF
• LOCK WASHER 5/8
• PLOW BOLT 5/8 NC X 2
• HHCS-5/8 NF X 2-1/4 LG GR8
• PIN COTTER 1/8 X 1-1/2 LG
• PIN 1 X 6
• GREASE FITTING 1/4-28 ALEMITE
• PIN, COTTER 1/4 X 2 LG
• PIN-ROLL 5/16 X 2 LG
• PIVOT CONNECTOR
• NUT, HEX 5/8 NC
HSP Rev —
37
QTY
2
1
1
1
1
1
1
1
1
1
4
6
2
4
1
1
1
1
1
1
2
NOTES
7. MOLDBOARD WEAR SHOE KITS
Figure 17. Moldboard Wear Shoe Kit
HSP Rev —
38
ITEM
DESCRIPTION
MOLDBOARD WEAR SHOE KIT
• MOLDBOARD SHOE WELDMENT
• CARRAGE BOLT, 5/8 NC X 3
• NUT, ELASTIC STOP 5/8 NC
QTY
1
2
4
4
NOTES
1.
1
2
3
PART NUMBER
2K-10026-01
2W-10025-01
9C-00076
9C-00645
2K-10026-02
2W-10025-01
9C-00076
9C-00645
MOLDBOARD WEAR SHOE KIT
• MOLDBOARD SHOE WELDMENT
• CARRAGE BOLT, 5/8 NC X 3
• NUT, ELASTIC STOP 5/8 NC
1
2
4
4
2.
1
2
3
2K-10026-03
2W-10025-01
9C-00076
9C-00645
2P-14575
MOLDBOARD WEAR SHOE KIT
• MOLDBOARD SHOE WELDMENT
• CARRAGE BOLT, 5/8 NC X 3
• NUT, ELASTIC STOP 5/8 NC
• PAD, WEAR SHOE
1
2
4
4
2
3.
1
2
3
4
2K-10026-04
2W-10025-02
9C-00077
9C-00645
MOLDBOARD WEAR SHOE KIT
• MOLDBOARD SHOE WELDMENT
• CARRAGE BOLT, 5/8 NC X 3-1/2
• NUT, ELASTIC STOP 5/8 NC
1
2
4
4
4.
1
2
3
MOLDBOARD WEAR SHOE KIT
• MOLDBOARD SHOE WELDMENT
• CARRAGE BOLT, 5/8 NC X 3
• NUT, ELASTIC STOP 5/8 NC
1
2
4
4
5.
1
2
3
2K-10026-05
2W-10025-03
9C-00076
9C-00645
2K-10026-06
2W-10025-04
9C-00076
9C-00645
MOLDBOARD WEAR SHOE KIT
• MOLDBOARD SHOE WELDMENT
• CARRAGE BOLT, 5/8 NC X 3
• NUT, ELASTIC STOP 5/8 NC
1
2
4
4
6.
1
2
3
NOTE:
1. For use on Homesafe moldboards with an eight inch center punched cutting edge, 15
degree attack angle, and a pin height of 15”.
2. For use on Homesafe moldboards with an eight inch center punched cutting edge, 4
degree attack angle, and a pin height of 19”.
3. For use on Homesafe moldboards with an eight inch top punched cutting edge, 15
degree attack angle, and a pin height of 15”.
4. For use on Homesafe moldboards with a six inch punched (carbide) cutting edge, 10
degree attack angle, and a pin height of 15”.
5. For use on Homesafe moldboards with a Schmidt Quick Hitch.
6. For use on Homesafe moldboards with a carbide cutting edge and Schmidt Quick Hitch.
HSP Rev —
39
8. LIFT LINK ASSEMBLY
Figure 18. Lift Link Assembly
ITEM
1
2
3
4
5
PART NUMBER
4A-06765
4W-06764
9C-08376
2P-00712
9C-00576
P-24004
DESCRIPTION
LIFT LINK ASSEMBLY
• LIFT LINK-WELDMENT
• 2" SAFETY PIN WEB SHACKLE
• PIN 1 X 4
• PIN-COTTER 1/4 X 2
• GRAB LINK - 1/2" CHAIN
HSP Rev —
40
QTY
2
1
1
1
1
2
NOTES
8.1 Lift Chain Weldment
Figure 19. Lift Chain Weldment
ITEM
1
2
3
PART NUMBER
2W-12330
9C-06790-048
9C-03232
9C-00007
DESCRIPTION
LIFT CHAIN WELDMENT
• CHAIN-1/2 X 48" LG
• SHACKLE-5/8
• LINK-REPAIR, 1/2
HSP Rev —
41
QTY
2
1
1
1
NOTES
8.2 Level Lift Kit, Two Chain
Figure 20. Level Lift Kit, 2-Chain
HSP Rev —
42
ITEM
1
2
3
4
5
6
7
PART NUMBER
4K-06172
REF
9C-08376
P-24004
2W-12330
—
4K-06173
REF
DESCRIPTION
LEVEL LIFT KIT, 2-CHAIN
• 225C HITCH
• 2" SAFTEY PIN WEB SHACKLE
• GRAB LINK
• LIFT CHAIN WELDMENT
• —
• MOD. KIT FOR CHAIN LEVEL LIFT
• HOME SAFE PLOW
NOTE:
1. See Figure 19 on Page 41 for parts breakdown.
HSP Rev —
43
QTY
1
REF
1
2
2
—
REF
REF
NOTES
1.
8.3 Level Lift Kit, Pulley Block Style
Figure 21. Level Lift Kit, Pulley Block Style
ITEM
1
2
3
4
5
6
7
8
9
10
PART NUMBER
2K-04732
4W-02125
9C-01370-168
9C-01407
9C-01282
9C-01276
9C-00007
9C-02052
9C-00096
9C-00139
2W-05732-002
DESCRIPTION
LEVEL LIFT KIT, PULLEY BLOCK STYLE
• LEVEL LIFT WELD'T
• CABLE-1/2 X 14'-0"
• SHACKLE-1/2"
• CABLE THIMBLE-1/2
• CLIP,CABLE-1/2
• LINK, REPAIR-1/2 X 2-1/2
• HHCS-5/8 NC X 2-1/2 LG GR.8
• NUT, HEX-5/8 NC
• WASHER, LOCK-5/8
• REVERSE FRAME-HYDRAULIC
HSP Rev —
44
QTY
1
1
1
2
2
4
2
1
1
1
REF
NOTES
8.4 Tension Spring, Lift Chain Assembly (Optional Equipment)
Figure 22. Tension Spring, Lift Chain Assembly (Optional Equipment)
1
2
3
4
5
ITEM PART NUMBER
2A-14830
2P-14871
2P-12595
9C-00007
9C-03232
9C-06790-038
DESCRIPTION
TENSION SPRING ASSEMBLY
• SPRING
• LONG BAR
• REPAIR LINK
• SHACKLE, 5/8"
• CHAIN-1/2 X 38" LG
HSP Rev —
45
QTY
1
1
2
1
1
1
NOTES
9. CURB GUARD KIT (OPTIONAL EQUIPMENT)
Figure 23. Curb Guard Kit
ITEM
1
2
3
4
PART NUMBER
2K-12324
2W-12323
9C-00077
9C-00096
9C-00139
DESCRIPTION
CURB GUARD KIT
• CURB GUARD-WELDMENT
• CARRIAGE BOLT-5/8 NC X 3-1/2 LG
• HEX NUT-5/8 NC
• LOCK WASHER-5/8
HSP Rev —
46
QTY
1
2
6
6
6
NOTES
9.1 Parking Stands
Figure 24. Parking Stand w/Mounting Brackets
HSP Rev —
47
ITEM
1
2
3
4
5
6
PART NUMBER
2K-12620
2P-02788-010
2P-11585
2W-11587
2W-11587-01
2P-15213
S2767.9136
2W-09885
DESCRIPTION
PARKING STAND
• FLAT-1/2 X 3 X 6.25 LG
• TUBE SQUARE-LEG SUPPORT
• SQ. SUPPORT LEG-WELDED
• SQ. SUPPORT LEG-WELDED
• PIN, PARKING STAND
• HINGED PIN
• A FRAME, OSCILLATING
NOTE:
1. Optional longer leg.
HSP Rev —
48
QTY
2
1
1
1
1
1
1
REF
NOTES
1.
Figure 25. Parking Stand w/Mounting Brackets (A-Frame)
HSP Rev —
49
ITEM
1
2
3
4
PART NUMBER
2K-14396
2W-11587
2P-15213
S2767.9136
2P-11585
DESCRIPTION
PARKING STAND
• SQ. SUPPORT LEG-WELDED
• PIN, PARKING STAND
• HINGED PIN
• TUBE SQUARE-LEG SUPPORT
NOTE:
1. For use with standard A-frame.
HSP Rev —
50
QTY
2
1
1
1
1
NOTES
1.
10. CYLINDERS
10.1 Reversing Cylinder, Single Acting, Nitride (Optional Equipment)
Figure 26. Reversing Cylinder, Single Acting, Nitride (Optional Equipment)
HSP Rev —
51
ITEM
1
2
3
4
5
6
7
8
PART NUMBER
9C-08037
30350
—
—
—
18340
1K-00847-043
9C-07712
12300
DESCRIPTION
REVERSING CYLINDER, SINGLE ACTING
• WEAR RING
• —
• —
• —
• O RING
• POLYPAK (21302)
• GLAND NUT (13681)
• ROD WIPER
QTY
2
1
—
—
—
1
1
1
1
NOTES
QTY
2
1
—
1
1
1
1
1
1
NOTES
10.2 Standard Cylinder Parts List
ITEM
1
2
3
4
5
6
7
8
PART NUMBER
9C-07108
30350
—
—
—
18340
21302
13681
12300
DESCRIPTION
STANDARD CYLINDER
• WEAR RING
• PISTON (STEEL)
• JACKET ASSEMBLY
• PISTON ROD
• O RING
• POLYPAK, TYPE B
• GLAND NUT
• ROD WIPER
HSP Rev —
52
10.3 Reversing Cylinder, Double Acting, Nitride (Optional Equipment)
Figure 27. Reversing Cylinder, Double Acting, Nitride (Optional Equipment)
HSP Rev —
53
ITEM
1
2
3
4
5
6
7
8
9
10
11
PART NUMBER
9C-07061
30360
—
21313
39938
—
—
—
18340
21302
13681
12300
DESCRIPTION
REVERSING CYLINDER, DOUBLE ACTING
• WEAR RING
• PISTON (STEEL)
• POLYPAK (21302)
• TEFLON BACKUP
• STOP TUBE
• JACKET ASSEMBLY
• PISTON ROD
• O RING
• POLYPAK (TYPE B)
• GLAND NUT
• ROD WIPER
HSP Rev —
54
QTY
2
1
—
1
1
1
1
1
1
NOTES
11. HYDRAULIC LINE KITS
11.1 Hydraulic Line Kit with DA Cylinders and Cushion Valve
Figure 28. Hydraulic Line Kit with DA Cylinders and Cushion Valve
HSP Rev —
55
11.1.1 Hydraulic Line Kit with DA Cylinders and Cushion Valve Parts List
ITEM
PART NUMBER
1K-01644-08
1
2
3
4
5
6
7
8
9
10
11
12
9C-02690-08
9C-02691-09
9C-02706-04
9C-02714-04
9C-03325-07
9C-03325-08
9C-03483
9C-07061
9C-01888-012
9C-03448
9C-00091
9C-00134
DESCRIPTION
HYDRAULIC LINE KIT W/DA CYLINDERS
AND CUSHION VALVE
• ADAPTOR 1/2 X 90°
• ADAPTOR 1/2 M.P.
• ELBOW 45° STR 1/2 P.
• TEE 1/2 P. STREET
• HOSE END 1/2 M.P. 3/8 P. RIGID
• HOSE END M.P.
• HOSE 1/2 100R2 H.P.
• CYL. D.A. 3-1/2 X 16-1/8 STR.
• CUSHION VALVE DXV-50-2000
• HHCS 5/16 NC X 2-3/4 LG
• NUT, HEX 5/16 NC
• LOCKWASHER, 5/16
HSP Rev —
56
QTY
1
2
2
2
2
2
10
19FT
2
1
2
2
2
NOTES
11.1.2 Hydraulic Line Kit with DA Cylinders Parts List
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
PART NUMBER
1K-01644-06
9C-02690-08
9C-02691-09
9C-02706-04
9C-02714-04
9C-03325-07
9C-03325-08
9C-03483
9C-07061
1W-00154
—
—
—
DESCRIPTION
HYDRAULIC LINE KIT W/DA CYLINDERS
• ADAPTOR 1/2 X 90°
• ADAPTOR 1/2 M.P.
• ELBOW 45° STR 1/2 P.
• TEE 1/2 P. STREET
• HOSE END 1/2 M.P. 3/8 P. RIGID
• HOSE END M.P.
• HOSE 1/2 100R2 H.P.
• CYL. D.A. 3-1/2 X 16-1/8 STR.
• BRACKET-QUICK COUPLER BULKHEAD
• —
• —
• —
QTY
1
2
2
2
2
2
10
19FT
2
1
—
—
—
NOTES
1.
2.
NOTE:
1. Due to similarity, illustration shown is the Hydraulic Line Kit with DA Cylinders and
Cushion Valve.
2. Not Illustrated
HSP Rev —
57
11.1.3 Hydraulic Line Kit with Cushion Valve Mounting Parts List
ITEM
PART NUMBER
1K-01644-02
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
9C-02690-08
9C-02691-09
9C-02710-05
9C-02714-04
9C-03325-07
9C-03325-08
9C-03483
9C-07061
9C-07109
9C-07110
9C-05681
9C-07125
9C-00144
9C-00209
115307A
DESCRIPTION
HYDRAULIC LINE KIT W/CUSHION VALVE
MOUNTING
• ADAPTOR 1/2 X 90°
• ADAPTOR 1/2 M.P.
• ELBOW, 90 STR, 1/2 P
• TEE 1/2 P. STREET
• HOSE END 1/2 M.P. 3/8 P. RIGID
• HOSE END M.P.
• HOSE 1/2 100R2 H.P.
• CYL. D.A. 3-1/2 X 16-1/8 STR.
• COUPLER, Q. COUPLER, 3/8
• NIPPLE, Q. COUPLER, 3/8
• CLAMP, HOSE
• SPRING, HOSE SUPPORT
• LOCKWASHER, 1"
• CAPSCREW, 3/8 X 1-1/4 HEX HD
• FLANGE NUT, 3/8 TOP LOCK
QTY
NOTES
1
1.
2
2
2
2
2
10
15FT
2
1
1
2
1
REF
1
1
2.
2.
2.
2.
2.
2.
2.
NOTE:
1. Due to similarity, illustration shown is the Hydraulic Line Kit with DA Cylinders and
Cushion Valve.
2. Not Illustrated
HSP Rev —
58
11.1.4 Hydraulic Line Kit with Flow Restrictors
Figure 29. Hydraulic Line Kit with Flow Restrictors
HSP Rev —
59
ITEM
1
2
3
PART NUMBER
1K-01644-05
9C-00091
9C-00134
9C-01888-012
4
9C-02691-09
5
9C-03325-08
6
7
8
9
10
11
12
9C-03448
9C-03483
9C-07600
9C-07108
9C-02704-08
—
—
DESCRIPTION
HYDRAULIC LINE KIT
• NUT, HEX 5/16-18 UNC
• LOCKWASHER 5/16 NOM
• CUSHION VALVE DXV-50-2000
• ADAPTER, 1/2 NPT MALE X 1/2 NPT
FEMALE SWIVEL
• HOSE END 1/2 HOSE NIPPLE X 1/2 NPT
MALE RIGID
• HHCS 5/16-18UNC X 2-3/4 LG GR8
• HOSE 1/2" 100R2
• FLOW RESTRICTOR 1/2 NPT FEMALE
• CYLINDER, SINGLE ACTING
• NIPPLE 1/2 NPT
• —
• —
NOTE:
1. See Parts List, Section 10.2, on Page 52 for parts breakdown.
HSP Rev —
60
QTY
1
2
2
1
NOTES
4
8
2
15FT
2
2
2
—
—
1.