HOSPITALITY CABINET
INSTRUCTION SHEET
ASSEMBLY INSTRUCTIONS
3
2
1
Attach the left and right side panels to the
bottom panel ensuring that they snap into
place with the 2 index holes on each side.
Insert the back brace into the
corresponding slots on the left and right
side panels so that the brace will sit flush
against the wall when mounted.
Attach the cover to the side panels using
the 2 screws. Ensure the hinges are
oriented so that screws are not visible
when the cover is down.
ATTACHING ADDITIONAL CABINETS
4
5
Attach the add-on side panel to the add-on
bottom panel ensuring that it snaps into
place with the 2 index holes on the panel.
NOTE: Add-on kits attach to existing
cabinets, so they contain 1 less side wall.
KNOCKOUT PLUGS
Insert add-on back brace into the
corresponding slots on the side panels so
that the brace will sit flush against the wall
when mounted.
6
Attach add-on cover to the side panels
using the 2 screws. Ensure the hinges are
oriented so that screws are not visible
when the cover is down. Repeat steps 4
through 6 for any additional cabinets.
MOUNTING NOTES
 Mount the cabinet(s) in the desired location using
appropriate hardware for the mounting surface. Be
sure there is enough room above the cabinet(s) for
the door(s) to swing open.
 Route the chemical line(s) from the dispenser(s)
through any of the various openings on the cabinet(s)
ensuring that each line is not kinked or pinched.
 APPLICATION NOTE: If using with a proportioning
APPLICATION NOTE: The covers have
knockout plugs that can be removed if
desired to allow the chemical line to be
routed into an F-style container.
system, do not mount the unit(s) below the
cabinet(s).
CAUTION: Wear protective clothing and eyewear when dispensing chemicals or other materials.
Observe safety handling instructions (MSDS) of chemical mfrs.
CAUTION: When installing any equipment, ensure that all national and local safety, electrical, and
plumbing codes are met.
0901137 Rev: A (12/13)
Page 1 of 2
DIMENSIONS
■ Max chemical bottle size:
■ Outer dimensions/single cabinet:
W 7.3” x H 11.8” x D 6.1”
W 19cm x H 30cm x D 16cm
W 9.4” x H 15.1” x D 6.4”
W 24cm x H 38cm x D 17cm
PARTS DIAGRAM
6320001
6320007
7320201
6320002
6320006
6320001
1200477-2
1200393
1200392
Part #
7630801
7630802
7630803
7630804
7630805
7630806
Description
Storage rack for 1 gallon or 5 liter bottles
Dual storage rack for 1 gallon or 5 liter bottles
Add-on kit for storage rack for 1 gallon or 5 liter bottles
Storage rack with lock for 1 gallon or 5 liter bottles
Dual storage rack with lock for 2 1 gallon or 5 liter bottles
Add-on kit for storage rack w/lock for 1 gallon or 5 liter bottles
DISCLAIMER
Knight LLC does not accept responsibility for the mishandling, misuse, or non-performance of the described items when used for
purposes other than those specified in the instructions. For hazardous materials information consult label, MSDS, or Knight LLC.
Knight products are not for use in potentially explosive environments. Any use of our equipment in such an environment is at the
risk of the user, Knight does not accept any liability in such circumstances.
WARRANTY
All Knight controls and pump systems are warranted against defects in material and workmanship for a period of ONE year. All
electronic control boards have a TWO year warranty. Warranty applies only to the replacement or repair of such parts when
returned to factory with a Knight Return Authorization (KRA) number, freight prepaid, and found to be defective upon factory
authorized inspection. Bearings and pump seals or rubber and synthetic rubber parts such as “O” rings, diaphragms, squeeze
tubing, and gaskets are considered expendable and are not covered under warranty. Warranty does not cover liability resulting from
performance of this equipment nor the labor to replace this equipment. Product abuse or misuse voids warranty.
FOOTNOTE
The information and specifications included in this publication were in effect at the time of approval for printing. Knight LLC reserves
the right, however, to discontinue or change specifications or design at any time without notice and without incurring any obligation
whatsoever.
KNIGHT LLC,
Knight Headquarters
Tel: 949.595.4800
Fax: 949.595.4801
Page 2 of 2
USA Toll Free
Tel: 800.854.3764
Fax: 800.752.9518
A Unit of IDEX Corporation (www.knightequip.com)
Knight Canada
Tel: 905.542.2333
Fax: 905.542.1536
Knight Europe
Knight Australia
Tel: 0044.1323.514855 Tel: 61.02.9352.1801
Fax: 0044.1323.514828 Fax: 61.02.9352.1899
Knight N. Asia
Tel: 82.2.3481.6683
Fax: 82.2.3482.5742
Knight S. Asia
Tel: 65.6763.6633
Fax: 65.6489.6723
0901137 Rev: A (12/13)