BCI CHEMICAL CORPORATION SDN BHD
(441454-X)
Technical Data Sheet
CALCIUM BROMIDE
PRODUCT DESCRIPTION
Calcium Bromide (CaBr2) is a single-salt solution or solid, ready for use to form
clear brine work-over and completion fluids that require densities from 8.4 to
15.3 lb/gal (1007 to 1833 kg/M3).
TYPICAL PROPERTIES
生化机构有限公司
BCI CHEMICAL
CORPORATION
SDN BHD
Calcium Bromide Liquid
Property
Appearance
Main content
Water insoluble matter
pH
Specific gravity, g/ml min.
Specifications
Colourless clear liquid
52.0% min.
0.30% max.
6.0 - 8.0
1.70 @ 770F (250C) for 53% solution
Calcium Bromide Powder
Property
Appearance
Main content
Water insoluble matter
pH
Specifications
White crystalline powder
95.0% min.
1.0% max.
6.5 - 9.5
FEATURES AND BENEFITS
Calcium Bromide Liquid is a ready for use high density, clear and solids-free
organic brine solution.
Lot 7, Jln BS7/22,
Tmn Perindustrian Bukit Serdang,
Sec 7, 43300 Seri Kembangan,
Selangor, Malaysia
Tel: +603-8944 1288
Fax: +603-8943 0008
[email protected]
www.bcichemical.com.my
Version: 2.1
Revision Date: 16.06.2010
APPLICATION
 Calcium Bromide Liquid is used during work-over and completion
operations to provide a clear brine fluid at a density up to 14.2 lb/gal (1700
3
kg/M ). It provides inhibition, preventing the hydration and migration of
swelling clays, and can be used for packer fluids or to adjust the density of
other brine systems.
 Calcium Bromide Powder can be used to achieve rapid density increases
with minimal volume increase. In solution, it has same function as liquid
material. Dry powder material is available especially for areas without access
to a liquid brine plant.
 CaBr2 can be mixed with CaCl2 to obtain densities up to 15.1 lb/gal (1809
kg/M3). When used with ZnBr2, densities to 19.2 lb/gal (2301kg/M3) can be
achieved.
This information is based on our present state of knowledge and is intended to provide general notes on our products and their
uses. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a
particular application. Any existing industrial property rights must be observed. The quality of our products is guaranteed under
our General Conditions of Sale.
BCI CHEMICAL CORPORATION SDN BHD
(441454-X)
Technical Data Sheet
CALCIUM BROMIDE
MIXING AND HANDLING
Store in corrosion resistant containers and keep closed and firmly sealed. It is
concentrated hygroscopic salt solution which will absorb water from the air,
reducing density if not properly stored.
INTERNATIONAL SHIPPING REFERENCES
Transportation of Calcium Bromide Liquid is not restricted by any regulatory
agency.
PACKAGING
Liquid material is packed in 55 Gallon (208 liters) HDPE drum containing 340
kgs net or 1000 liters HDPE tote containing 1700kgs net. Solid material is
packed in 25 kgs sacks.
MSDS - Material Safety Data Sheet is available upon request.
生化机构有限公司
BCI CHEMICAL
CORPORATION
SDN BHD
Lot 7, Jln BS7/22,
Tmn Perindustrian Bukit Serdang,
Sec 7, 43300 Seri Kembangan,
Selangor, Malaysia
Tel: +603-8944 1288
Fax: +603-8943 0008
[email protected]
www.bcichemical.com.my
Version: 2.1
Revision Date: 16.06.2010
This information is based on our present state of knowledge and is intended to provide general notes on our products and their
uses. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a
particular application. Any existing industrial property rights must be observed. The quality of our products is guaranteed under
our General Conditions of Sale.