systra
EXTERIOR BLINDS EZ 90
Product Systra no. 90
2
Maximum width 400 cm, maximum height 400 cm, maximum area 8 m. Max. area
2
2
of coupled blinds 8 m (control by crank), or 24 m (control by motor). Minimum width
40 cm (crank), or 60 cm (motor), minimum height 50 cm. The width is defined including
the guiding rails, the height is defined including the head rail, the length of the
head rail is set individually acc. to the installation method.
Head rail 58 x 56 mm, bottom rail in the slat width, slats 90 mm wide,
guiding rails 20 x 22 mm.
Material: head rail of galvanized steel plate, slats of Al-Mg-alloy,
head and guiding rails of extruded aluminium, housing of bent aluminium plate,
textile ladders and tapes of terylen or kevlar, PAD-packing pressed in the slat.
Colour: basic choice acc. to the current offer, for larger quantities acc. to RAL and NCS.
O
O
Basic version: manual control by crank 45 or 90
Extra version: control by electric drive 220 V, by push button or switch,
group control of blinds, automatics sun - wind, remote control, aluminium housing
of the head rail and of the lifted bunch.
Fixing: - blinds by special brackets to the over-beam of the window or by consoles
sideways to the window lintel or frame
- guiding rails to the lining or by special distance brackets to the window frame
Remark: - minimum space width for the head rail is 13 cm, with the housing 16 cm
- crank length is 80 - 300 cm
- possibility of coupling the blinds for 1 control (crank or motor - see dimensions)
Table - clearance height x folded slats bunch
Clearance height
Slats bunch
101-125 cm
18 cm
126-150 cm
20 cm
151-175 cm
22 cm
176-200 cm
23 cm
201-225 cm
25 cm
226-250 cm
26 cm
251-275 cm
28 cm
276-300 cm
29 cm
301-325 cm
31 cm
326-350 cm
32 cm
351-375 cm
34 cm
376-400 cm
35 cm
with covering plate
+ 2 cm
Slats joining (Gekuppelte)
By the crank it is possible to handle
4 slats maximum, 2 on the right and
2 on the left.By the engine it is
possible to handle 5 slats maximum
- in the bedding of the engine in the
mid slat 2+2 slats
90 mm
Slat "Z" 90 mm
Assembly
(mounting bracket, wall console,
housing holder, supporting rail, bunch of slats)
Mounting bracket
Adjustable arms
Crank - 45°
Distance holder of
the guiding profile
Wall console
Locking bolt
Electric drive 220V
Foam filling for
damping of
the wind blast
Guiding profile
Double guiding profile
Slats EZ 90 mm
Blind axis
Housing
Locking bolt
Crank - 45° upper knuckl - detail
Possible extension from 150 to 400mm
Possible extension from 120 to 160mm
Possible anchorage - wall/ceiling
Examples of the housing shapes
hk
hk
hp
hp
min. 15
min. 15
systra
min.
min.
45°
EZ 90 - vertical section - installation with the housing
min. 10
3
G
bk
4 5°
EZ 90 - vertical section - installation
in the construction cavity
bk
bk
x
bk
min. 10
housing
13
min. 16
13
16
hl
hl
1 2 min.
2 2
2 2
2 2
EZ 90 - horizontal section - installation in the facade
2
2
EZ 90 - horizontal section - installation to the lining
hk = construction height (blind height)
hl = clearance
hp = slat bunch height (with housing +2cm)
bk = construction width (blind width)
dimensions are in cm