spec sheet s-1000

TECHNICAL SPECS : S1000 FX-GX
STAND ALONE UV/FILTER AIR PURIFIER
Description
The S1000FX is a combination Ultraviolet and Filter Air Purifier with a powerful motor fan The S1000FX is designed to destroy the
harmful pollutants and odors, other chemical and biological contaminants. It can be used in smoking rooms, garbage rooms, change
room, clean room etc… with the appropriate options.
Motor: backward impeller - 115 V (partMSCMTR2), 230V (partMSCMTR10)
• ZIEHL-ABEGG BACKWARDS CURVED MOTOR RH35M-4EK.4F.1
• AXIAL motor, so the unit could be position upright or sideway
• 410 watt, 4.2 amps (120v), 1.8 amps (230v)
• 1750 CFM (no load)
Unit
• Aluminum casing, textured paint, 59pounds (26.8KG)
• Dimension 20” x 20” x 40” (50.8cm X 50.8cm X 101.6 cm)
• Whole unit consumption (120v) : 10 amps, 550 watts
• Two round exhaust 8 inches, two round intakes 8 inches
• 3 access door: for the motor, for the filters, for the lamp assembly
• Limit switch on door access. 6 feet 3 prong cord
• 1000 CFM under load , 59db at 5ft , ducted 54db at 5 ft
• Aluminum reflector for the UV lamp with easy access to change lamp
MOTOR LOAD
• Filter section: 2 x 1 inch 20” x20” section, 1 x 4 inch 20” x 20” section
• 4 suspension rod insert on horizontal, 4 on vertical
Standard equipment
• 1 x 16 inches J Lamp (partLMPRGXJ160) with 26 inches UV-C(germicidal)/2 inches
UV-V (oxidation)
• 2 x 1 inch pleated pre-filter 20 x 20 (partMSCFTR), 1 x 4 inches filter 95%
(partMSCFTR2)
• 1 x ballast FULHAM Workhorse 5 115V (partBST120W5) 230V (partBST230W5)
Warranty
• ballast :3 years, motor :1 year, lamp :18 months
Specifications
A stand-alone 1000CFM unit in a light chassis for air treatment; combines high efficiency
filter with high UV efficiency treatment where the lamp is parallel to the airflow and encase
in a highly reflective aluminum case. UV lamp will provide high output germicidal UVC and if
needed UV-V oxidation to attack chemical and odours.
OPTIONS
• For Smoking room, Nails Salon, diesel odours, etc
o SUBKITVOCS1000: factory installed option includes (1) VOC sensor (1) BST120W5 ballast or BST230W5 (PLEASE
SPECIFY) (1) LMPRXJ160 UV-V "J" lamp. Applications Smoking room, Nails Salon, diesel odors etc…
• For clean rooms, hospital, computer rooms
o SUBKITCROS1000: factory installed option includes (1) HEPA 99,97% filter (1) BST120W5 ballast or BST230W5
(PLEASE SPECIFY) (1) LMPRGJ160 UV-C "J" lamp.
• For garbage rooms
o SUBKITOZDS1000: factory installed option includes (1) ozone controller set to .025 , no HEPA filter (1) BST120W5
ballast or BST230W5 (PLEASE SPECIFY) (1) LMPRGJ160 UVV "J" lamp.
MODEL
QTY
COMMENTS
PROJECT :
LOCATION :
ARCHITECT :
ENGINEER :
CONTRACTOR :
DATE :
Drawings for
o information
o approval