GE Monogram® 30" Built-In Single Oven
ZET1PHSS
ZET1PHSS
OVERALL DIMENSIONS
29 3/4" (75.6)
28 1/2" (72.4)
min cutout width
15/16"
(2.5)
5 3/16"
(13.2)
23 1/16"
27 1/4"
(69.2) min
cutout height
12"
22 1/2" (57.2)
(58.7)
(30.5)
7 1/16"
(18.0 )
7/16"
(1.1)
FRONT VIEW (SHOWING CUTOUT OVERLAP)
SPECIFICATIONS
Overall Width
29 3/4" (75.6 cm)
Overall Height
28 1/2" (72.4 cm)
Overall Depth
Including Handle
27 1/2" (69.9 cm)
Oven Door Clearance
20 9/16" (52.3 cm)
Overall Oven
Interior Capacity
5.0 cu. ft. (141.6 liters)
Oven Interior Dimensions 25" x 17 3/8" x 20 1/4"
(W x H x D)
(63.5 x 44.1 x 51.4 cm)
24 3/4" (62.9)
14 7/8"
1 3/8" (3.5)
8 3/8"
(37.8)
(21.4)
2 5/8" (6.8)
1 7/8" 3 1/2"
(4.7)
7 15/16"
(8.9)
(20.1)
28 5/8"
(72.8)
Minimum Cabinet Width* 30" (76.2 cm)
Minimum Cabinet Depth* 24" (61.0 cm)
Minimum Base Support
200 lbs. (90 kg)
Cutout Width*
28 1/2" (72.4 cm) Min
28 5/8" (72.7 cm) Max
Cutout Height*
27 1/4" (69.2 cm) Min
27 5/16" (69.4 cm) Max
Cutout Depth*
23 1/2" (59.7 cm) Min
Volts/Hertz/Amps
240/208 V AC, 60 Hz, 20A
Conduit Length
40" (72" available special
order: WB18T10398)
Electrical Rating
3.4 kW at 208V
4.5 kW at 240V
Shipping Weight
208 lbs. (95 kg)
SIDE VIEW
5/8"
28 7/16" (72.2)
(1.6)
10 1/2"
(26.6)
8 7/16"
(21.4)
27 1/2"
(69.9)
* Additional space will be needed for flush installation.
2 3/4"
ATTENTION ELECTRICIAN:
A 240/208V, 60Hz, 20 Amp circuit is required. An
inidividual properly grounded branch circuit or
circuit breaker is required. Hardware junction box
is required for built-in product.
(7.0)
TOP VIEW
Dimensions in parentheses
are in centimeters unless
otherwise noted. Actual
product dimensions may
vary due to manufacturing
tolerances.
20 9/16"
(52.3) min
OPEN OVEN DOOR
SHOWING DOOR CLEARANCE
Product Specification Revised 10/14
ZET1PHSS
GE Monogram® 30" Built-In
Single Oven
ZET1PHSS
ZET1PHSS
WALL INSTALLATION
TOP VIEW
TOP VIEW
3/4"
NOTES
2 1/2"
(6.4)
Side cleats
depth
(1.9)
2 1/2"
3/4"
(6.4)
Side cleats
depth
(1.9)
30 1/4" (76.8) flush inset width
with 1/4" (0.6) reveals
23 1/2" (59.7)
min cutout depth
30 1/4" (76.8) flush inset width
with 1/4" (0.6) reveals
3/4"
24 15/16" (63.4)
(1.9)
Top cleat
cutout depth
23 1/2" (59.7)
3/4"
24 15/16" (63.4)
min cutout depth
(1.9)
Top cleat
cutout depth
Top cleat
27 1/4"
(74.1)
(2.4)
Side cleats 29
height
(74.1)
Flush inset
height
Side cleat
(69.2)
(24.1)
9 1/2"
(24.1)
3/4" (75.5)
cutout width
29 3/4" (75.5)
cutout width
3/4" (1.9) Bottom cleat
Bottom cleat
3/4" (1.9) Bottom cleat
Bottom cleat
C
9 1/2"
(2.4)
Side cleats
15/16"
Flush
inset
29
1/8"
Side cleat
(69.2)
ELEC.
(13.5)
15/16"
29 1/8"
ELEC.
(13.5)
5 5/16"
Top cleat
27 1/4"
B
5 5/16"
C
D
A B
ased on a user height
of 5' 6" to 5' 10"
B J unction box location
(May also be located
in adjacent cabinet.)
C P
latform must be
able to support 200 lbs
(90 kg)
D C
abinet surfaces must
be an appearance
finished surface for
flush installation.
E C
leats may be visible
and should be finished
to match cabinetry.
F M
aximum toe kick
height of 4" when
installed beneath a
certified cooktop.
E
32 1/2"
30 1/4" (76.8)
32 1/2"
(82.6)
(82.6)
Recommended
Recommended
cutout
cutout
location
location
from floor
30 1/4" (76.8)
from floor
A
STANDARD
STANDARD
INSTALLATION
INSTALLATION
FLUSH INSET
FLUSH
INSET
INSTALLATION
INSTALLATION
FLUSH
INSET
INSTALLATION
FLUSH
INSET
INSTALLATION
FRONT
VIEW
FRONT
VIEW
Allow 1/4" (0.64) clearances
from side edges of oven door.
UNDERCOUNTER INSTALLATIONDimension varies
Dimension varies
5 5/16"
3"
(7.6)
23 1/2"
27 1/4"
(69.2)
27 1/4"
3"
5(13.5)
5/16"
ELEC.
(13.5)
(7.6)
ELEC.
9 1/2"
(24.1)
(59.7) min cutout depth
23 1/2"
28 1/2" (72.4)
(59.7) min cutout depth
(69.2)
B
min cutout width
9 1/2"
(24.1)
28 1/2" (72.4)
3/4"
min cutout width
24 15/16"
(63.4)
24depth
15/16"
cutout
(63.4)
cutout depth
(1.9)
3/4"
(1.9)
F
STANDARD
INSTALLATION
STANDARD
INSTALLATION
C
STANDARD INSTALLATION
FRONT VIEW
STANDARD INSTALLATION
FRONT VIEW
FLUSH INSET
INSTALLATION
FLUSH INSET
INSTALLATION
For more details, refer to the installation instructions for this product on Monogram.com.
Dimensions in parentheses are in centimeters unless otherwise noted.
Product Specification Revised 10/14
GE Monogram® 30" Built-In Single Oven
ZET1PHSS
ZET1PHSS
INSTALLATION WITH ADVANTIUM
AND WARMING DRAWER
SIDE BY SIDE INSTALLATION
ZET1PHSS
NOTES
2" (5.1) min
2" (5.1) min
ELEC.
21"
A (53.3)
ELEC.
ELEC.
21"
(53.3)
ELEC.
2 1/2"
(6.4)
min
(6.4)
min
SIDE BY SIDE INSTALLATION
FRONT VIEW OF CUTOUTS
SIDE BY SIDE INSTALLATION
FRONT VIEW OF CUTOUTS
min
2" (5.1)
B
min
(23.5)
9 1/4"
(23.5)
F G
as regulator and
electric connections
for cooktops must be
located in an adjacent
accessible location to
the right
STANDARD INSTALLATION
SIDE VIEW
STANDARD INSTALLATION
SIDE VIEW
CL
CL
UNDER COOKTOP INSTALLATION
I
C
J
GAS
GAS
GAS
GAS
ELEC.
Wall oven
ELEC.
E
ELEC.
wall oven
ELEC.
ELEC.
cooktop
ELEC.
wall oven
Wall oven
2 7/8"
3/4" thick platform
required
3/4" thick platform
required
D
cooktop
(7.4) max
Junction
box
2 7/8"
can(7.4)
protrude
max
from
back
Junctionwall
box
of installation
can protrude
(Not
cabinet
from
back wall)
wall
of installation
(Not cabinet wall)
F
G
4 3/4"
(12.1) max
4 3/4"
(12.1) max
STANDARD INSTALLATION
STANDARD
INSTALLATION
SIDE VIEW
SIDE VIEW
C N
ote this oven is only
approved to be installed
under specific models as
labeled on this unit.
E J unction box location
for wall oven. (May
also be located in
adjacent cabinet).
9 1/4"
H
B D
imension per Warming
Drawer requirement
D S
upport platform made
of 3/4" (1.9 cm) wood
is required. Must be
capable of supporting
200 lbs (90 kg). Support
Platform base to be
same height as toe kick.
2 1/2"
2" (5.1)
A D
imensions per
Advantium or
Microwave Oven
requirement
FRONT VIEW
FRONT VIEW
5"
(12.7)
To centerline
5"gas pipe
of
(12.7)
To centerline
of gas pipe
G T
op and/or side fillers
may be necessary if unit
is positioned between
existing cabinets. Be
sure they are attached
securely, since they will
anchor the oven in the
cabinet.
H F or flush oven
installations, the
cooktop cutout must be
set back 2 1/2" (6.4) plus
the cleat setback.
I D
imension varies based
on model.
example:
ZGU385 5 1/2" (14.0)
(from wall)
ZGU384 4 5/16" (11.0)
(from wall)
J D
imension varies based
on model.
example:
ZGU3850"
(centerline)
ZGU384 12 1/16" (30.6)
(centerline)
For more details, refer to the installation instructions for this product on Monogram.com.
Dimensions in parentheses are in centimeters unless otherwise noted.
Product Specification Revised 10/14
GE Monogram® 30" Built-In Single Oven
ZET1PHSS
FEATURES AND BENEFITS
True European Convection with Direct Air Channels heated air from the top of the oven and
circulates it around food on all sides for perfectly
uniform baking and roasting
5.0 Cu. Ft. Capacity - Accommodates even the
largest meals
Ten-Pass Bake Element - Covers more surface area
for more even baking results
All-Glass Interior Door Panel – Offers a visually
striking look that's easy to clean
Theatre-Style LED Oven Lighting - Located on both
sides of the oven to enhance visibility and provide a
clear view of food, regardless of rack position
Stainless steel back-lit digital control knobs Rotate with smooth precision. An indicator light in
each knob makes it easy to view and select heat
settings
R
Notification Lighting - Allows you to check cooking
status with a quick glance
Self-Cleaning, Full-Extension Oven Racks - Glide
in and out smoothly on stainless steel ball bearings,
and are designed to be left in the oven during the
self-clean cycle
Self-Clean with Steam Clean Option - Gives you
flexible options for thorough oven cleaning
Ten-Pass, Dual Broil Element - Evenly browns
dishes of all types and sizes
Brillion™-Enabled - Allows you to control oven
functions from anywhere inside or even outside your
home, using your smartphone or other web-enabled
mobile device
Black Interior – Offers a stylish complement to the
sophisticated exterior design
Product Specification Revised 10/14