NEOREC(NEODYMIUM-IRON-BORON) MAGNETS Introduction.................................................................................. 1 Features/Applications .................................................................. 2 Br/HCJ Characteristics Distribution .............................................. 3 Irreversible Demagnetization Characteristics .............................. 5 Magnet Structures/Magnetic Characteristics/ Rust Prevention Treatments..................................................... 6 Demagnetization Curves/Magnetic Characteristics NEOREC50H........................................................................... 8 NEOREC52A ........................................................................... 9 NEOREC50B ......................................................................... 10 NEOREC50F ......................................................................... 11 NEOREC47B ......................................................................... 12 NEOREC45F ......................................................................... 13 NEOREC47H......................................................................... 14 NEOREC44H......................................................................... 15 NEOREC41H......................................................................... 16 NEOREC42SH ...................................................................... 17 NEOREC38SH ...................................................................... 18 NEOREC40UH ...................................................................... 19 NEOREC38UH ...................................................................... 20 NEOREC35UH ...................................................................... 21 NEOREC35UX ...................................................................... 22 NEOREC30UX ...................................................................... 23 NEOREC30EV....................................................................... 24 NEOREC42B ......................................................................... 25 NEOREC40F ......................................................................... 26 NEOREC40H......................................................................... 27 NEOREC37H......................................................................... 28 NEOREC34SH ...................................................................... 29 NEOREC31UH ...................................................................... 30 NEOREC27UX ...................................................................... 31 Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. (1/31) Neodymium-Iron-Boron Magnets NEOREC Series INTRODUCTION In recent years, small, high-performance rare-earth magnets have been in increasing demand for use in electronics equipment. In 1977, TDK commercialized a 2-17 type REC magnet, solving the problem of high cost, the main drawback with conventional samariumcobalt magnets. It not only achieved better cost-performance, its superior performance was appraised as being the highest in the world. The NEOREC magnet is a new product, surpassing the REC magnet. The main raw materials are neodymium, a rare-earth element, iron and boron. Its magnetic characteristics at the mass production level reach 49MGOe in maximum energy product(BH), achieving 50 to 80% high performance with 10% reduction in specific gravity compared with samarium-cobalt magnets. Ideal for meeting miniaturization and weight reduction needs for VCMs and other equipment. TDK offers a selection of custom magnets in any shapes and sizes to meet customers’ requirements. TDK also provides a range of technical services, including design of NEOREC magnet-applied products. For further information, please contact TDK or your nearest representatives. • Development of this product was made under license granted for the use of proprietary techniques developed by Hitachi Metals, Ltd. Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • All specifications are subject to change without notice. 001-02 / 20081209 / e331.fm (2/31) FEATURES/APPLICATIONS FEATURES • Magnetic characteristics at the mass production level reach 49MGOe in maximum energy product(BH) max, achieving 50 to 80% higher performance than rare-earth cobalt magnet. • The specific gravity is 7.4g/cm3 more than 10% lower than that of rare-earth cobalt magnet. Ideal for meeting miniaturization and weight reduction needs. • Higher mechanical strength such as bending and tensile strength than rare-earth cobalt magnets, making handling easier than before. • Since the main raw materials are neodymium and iron, both abundant resources, stable supply is assured. APPLICATIONS Actuators for magnetic and optical disks, core-less motors, servomotors, stepping motors, MRI’s printers, sensors, magnetrons, klystrons, magnetic bearings, magnetic couplings, etc. DIFFRENCES BETWEEN NdFe-MAGNET AND SmCo-MAGNET Item Composition Manufacturing method Magnetic characteristics Maximum energy product (BH)max Residual flux density Br Intrinsic coercive force HCJ Recoil permeability Reversible temperature coefficient of Br Temperature coefficient of HCJ Physical characteristics Curie temperature Density Thermal expansion coefficient C//∗ (0 to 100°C) C⊥∗ (0 to 100°C) Mechanical characteristics Deflection strength Compressive strength Tensile strength Vickers hardness Electric resistance NdFe-magnet Nd, Fe, B, and other additives Sintering SmCo-magnet Sm, Co, Fe, Cu, and other additives Sintering 28 to 49MGOe 10.3 to 13.0kG 11.0 to 25.0kOe 1.05 –0.11 to –0.13%/°C –0.55 to –0.65%/°C 16 to 32MGOe 8.2 to 11.6kG 6.2 to 20.0kOe 1.05 –0.03 to –0.04%/°C –0.15 to –0.30%/°C 320°C 7.3 to 7.5g/cm3 800°C 8.2 to 8.4g/cm3 5.2× 10–6/°C –0.8× 10–6/°C 8× 10–6/°C 11× 10–6/°C 25kg/mm2 110kg/mm2 7.5kg/mm2 550 to 650 130× 10–6Ωcm 15kg/mm2 82kg/mm2 3.6kg/mm2 500 to 550 86× 10–6Ωcm 15kOe min.(SmCo5 system) 25kOe min.(Sm2Co27 system) Brittle easily Relatively resistant to rust Required magnetizing field 25kOe min. Resistance to cracking Resistance to rust Solid, hard to break Relatively easy to rust ∗ C// is the value measured in the easy magnetization direction. C⊥ is the value measured in the vertical direction to the easy magnetization direction. • All specifications are subject to change without notice. 001-02 / 20081209 / e331.fm (3/31) Br/HCJ CHARACTERISTICS DISTRIBUTION OF NEOREC MAGNETS [mT ] 1500 (kG) 15 52A 50F 50B 50H NEOREC(Nd-Fe-B) 47H 47B 44H 45F 42B 40F 41H 42SH 40UH 38SH 38UH 40H 37H 35UH 35UX 34SH 30UX 32A 32AH 30 30EV 31UH Residual flux density Br 27UX 26 26A 1000 10 24 22 REC(Sm-Co) 18 Transverse magnetic field press CM CM 11UH 11SH Axial magnetic field press CM(Nd-Fe-B Bonded magnets) CM 8BLH CM 8BL 500 5 5 10 500 15 1000 20 25 1500 2000 Intrinsic coercive force H CJ 30 40 (kOe) 35 2500 3000 [kA/m] • All specifications are subject to change without notice. 001-02 / 20081209 / e331.fm (4/31) TRANSVERSE MAGNETIC FIELD PRESS [mT ] 1500 Direction of pressed powder (kG) 15 Magnetic field coil 52A 50H Upper punch 50B 50F 1400 47B 14 47H Direction of magnetic field Pole piece Residual flux density B r 45F 1300 13 44H 42SH 41H Die 40UH Under punch 38SH 38UH Magnetic powder 1200 35UH 12 35UX • Block magnet(type) for pick up 30UX 1100 11 • For FA’s motor 1000 10 10 15 1000 20 25 35 (kOe) 30 N S 2500 [kA/m] 1500 2000 Intrinsic coercive force H CJ • For automotive actuator • For pager AXIAL MAGNETIC FIELD PRESS [mT ] 1500 (kG) 15 Direction of pressed powder Magnetic field coil Upper punch 1400 Magnetic powder 14 Residual flux density B r 42B 1300 13 40F 40H Under punch 37H 1200 12 34SH • VCM • For ABS’s sensor 31UH 1100 11 • For CD’s and MD’s clamper • For camcorder’s motor 27UX 1000 10 • For optical pickup 10 15 1000 20 25 1500 2000 Intrinsic coercive force H CJ 35 (kOe) 30 2500 [kA/m] • For FA’s motor • For automotive actuator • All specifications are subject to change without notice. 001-02 / 20081209 / e331.fm (5/31) IRREVERSIBLE DEMAGNETIZATION CHARACTERISTICS The irreversible demagnetization characteristics of NEOREC magnets are dependent on their coercive forces and are not due to their residual flux densities. There is no difference between the irreversible demagnetization characteristics of transversely and longitudinally magnetized products. TEMPERATURE DEPENDENCE OF IRRERSIBLE DEMAGNETIZATION FACTOR Temperature(˚C) Irrersible demagnetization factor(%) 0 50 100 150 200 250 300 0 –10 –20 –30 NEOREC30UX NEOREC45F –40 NEOREC41H Pc=0.5 NEOREC38SH NEOREC35UH –50 Temperature(˚C) Irrersible demagnetization factor(%) 0 50 100 150 200 250 300 0 –10 –20 –30 NEOREC45F NEOREC30UX NEOREC41H –40 NEOREC38SH Pc=1.0 –50 NEOREC35UH Temperature(˚C) Irrersible demagnetization factor(%) 0 50 100 150 200 250 0 300 NEOREC30UX –10 –20 –30 –40 NEOREC45F Pc=2.0 –50 NEOREC41H NEOREC38SH NEOREC35UH TEMPERATURE OF 5% MAGNETIC FLUX LOSS vs. COERCIVE FORCE 320 280 240 220 200 Pc=2.0 Pc=1.0 Pc=0.5 180 160 140 100 Pc=1.0 80 60 Pc=0.5 40 NEOREC35UH 120 20 0 10 15 20 NEOREC30UX Pc=2.0 NEOREC38SH Temperature of 5% magnetic flux loss (˚C) 260 NEOREC41H NEOREC45F 300 25 30 35 Intrinsic coercive force HCJ (kOe) • All specifications are subject to change without notice. 001-02 / 20081209 / e331.fm (6/31) MAGNET STRUCTURES/MAGNETIC CHARACTERISTICS/RUST PREVENTION TREATMENTS CROSS SECTION OF A MAGNET (MODEL ILLUSTRATION) Orientation (Alignment axis of easy magnetization) Primary phase Grain boundary phase (Nd2Fe14B) (Nd-rich) B-rich phase Cavities (Nd1.1Fe4B4) Oxide phase Carbide phase (Nd2O3) (Nd2C3) PHASE PROPORTIONS AND MAGNETIC CHARACTERISTICS NEOREC Series (%) Primary phase Grain boundary phase B-rich phase Oxide phase Carbide phase Cavities Orientation (%) Br (kG) 38’s 84 4 3 7 1 1 93 12.7 41’s 88 4 2 4 1 1 93 13.2 45’s 92 2 1 3 1 1 94 13.6 50’s 94 2 0.5 2.5 0.5 0.5 95 14.2 Primary phase CORROSION RESISTANCE OF MAGNET MATERIALS (MODEL ILLUSTRATION) Before corrosion Corrosion (early stage) Corrosion (late stage) Primary phase crystal grains(Nd2Fe14B) Grain boundary phase(Nd-rich) 1) Corrosion on the surface of the primary phase → Fe2O3 • H2O 2) Corrosion in the grain boundary phase (Nd-rich) → (Nd2O3, Nd(OH)3) Drop-off of primary phase crystal grains ↓ Corrosion on the surface of the primary phase Corrosion in the grain boundary phase • All specifications are subject to change without notice. 001-02 / 20081209 / e331.fm (7/31) RUST PREVENTION TREATMENTS FOR NEOREC Ni plating Surface treatment technique Film structure Film thickness Adhesion Reliability Electrolytic plating Element Ni Spontaneous potential (mV: standard electrode) Internal stress (Mpa) Vickers hardness (Hv) Organic brightener Range (µm) Uniformity Room temperature 200°C Adhesiveness Temperature resistance test (60°C, 90%RH) Humidity resistance test (85°C, 85%RH) Salt spray test (35°C, 5% NaCl) SO2 gas test (40°C, 75%RH) Examples of applications Maximum operating temperature (°C) Ni –250 to –300 –150 to –100 400 to 600 Used 10 to 20 Acceptable Good Acceptable Acceptable >2500 (hr) >500 (hr) <24 (hr) <96 (hr) HDD Motors for hard disk drives, audio visual equipment and office automation equipment. (electrical household appliances) 120 Electrolytic plating with good throwing power Ni/Sn –220 to –170 –50 to 0 200 to 300 Not used 10 to 20 Good Excellent Good Good >2500 (hr) >500 (hr) <24 (hr) <96 (hr) Improvements to corrosion resistance and adhesion –100 to –150 –50 to 0 200 to 300 Not used 10 to 20/1 to 3 Good Excellent Good Excellent >2500 (hr) >500 (hr) >24 (hr) >96 (hr) Optical pickups, sensors and motors (electrical household appliances, factory automation and automobiles) Actuators, sensors and motors (factory automation and automobiles) 220 220 • Please consult us for the different types of surface treatments. CORRELATION IN HUMIDITY RESISTANCE TESTS Test items Pressure cooker test Humidity resistance test Cycle test Operating environment (estimated) Conditions 120 °C 2atm, 100%RH 85°C, 85%RH 60 °C, 90 %RH MIL202F-106E 23.8°C 78%RH Bangkok 16.2°C 67%RH Osaka Times Rust (blisters) Breaking Rust (blisters) Breaking 25 (hours) 50 75 100 125 250 (hours) 1500 (hours) 50 (cycles) 500 3000 100 750 4500 150 1000 6000 200 1250 7500 250 4.5 (years) 9.0 13.5 18.0 22.5 18 (years) 36 54 72 90 22.5 (years) 45 67.5 90 113 90 (years) 180 270 360 450 (↑ 20hr: Pre-shipment inspection) • All specifications are subject to change without notice. 001-02 / 20081209 / e331.fm (8/31) DEMAGNETIZATION CURVES/MAGNETIC CHARACTERISTICS NEOREC50H DEMAGNETIZATION CURVE 3.0 5.0 B-H Curve J-H Curve 0.7 [mT ] 2.0 (kG) – B/H 1.5 1.0 15 1500 20˚C 60˚C 100˚C 140˚C 0.5 1000 5 500 0 0 B, J 10 0.3 (BH) max [kJ/m3 ] 50 40 30 20 (kOe) [kA/m] –20 –15 1500 –10 1250 1000 750 –H 0 –5 500 250 0 MAGNETIC CHARACTERISTICS Residual flux density Br Coercive force HCB Intrinsic coercive force HCJ Maximum energy product (BH)max [mT] (kG) [kA/m] (kOe) [kA/m] (kOe) [kJ/m3] (MGOe) 1420±20 14.2±0.2 1090±56 13.7±0.7 1353 17.0 390±16 49.0±2.0 • [ ]: in the unit of SI ( ): in the unit of CGS • All specifications are subject to change without notice. 001-02 / 20081209 / e331.fm (9/31) NEOREC52A DEMAGNETIZATION CURVE 3.0 5.0 B-H Curve J-H Curve 0.7 [mT ] 2.0 (kG) – B/H 1.5 1.0 15 1500 20˚C 60˚C 100˚C 0.5 1000 5 500 0 0 B, J 10 0.3 (BH) max [kJ/m3 ] 400 320 240 160 (kOe) [kA/m] –20 –15 1500 1250 –10 1000 750 –H 0 –5 500 250 0 MAGNETIC CHARACTERISTICS Residual flux density Br Coercive force HCB Intrinsic coercive force HCJ Maximum energy product (BH)max [mT] (kG) [kA/m] (kOe) [kA/m] (kOe) [kJ/m3] (MGOe) 1440±20 14.4±0.2 1035±72 13.0±0.9 995 12.5 398±16 50.0±2.0 • [ ]: in the unit of SI ( ): in the unit of CGS • All specifications are subject to change without notice. 001-02 / 20081209 / e331.fm (10/31) NEOREC50B DEMAGNETIZATION CURVE 0.7 3.0 5.0 B-H Curve J-H Curve [mT ] 2.0 (kG) – B/H 1.5 1.0 15 1500 20˚C 60˚C 100˚C 140˚C 0.5 1000 5 500 0 0 B, J 10 0.3 (BH) max [kJ/m3 ] 400 320 240 160 (kOe) [kA/m] –20 –15 1500 1250 –10 1000 750 –H 0 –5 500 250 0 MAGNETIC CHARACTERISTICS Residual flux density Br Coercive force HCB Intrinsic coercive force HCJ Maximum energy product (BH)max [mT] (kG) [kA/m] (kOe) [kA/m] (kOe) [kJ/m3] (MGOe) 1420±20 14.2±0.2 1074±48 13.5±0.6 1114 14.0 390±16 49.0±2.0 • [ ]: in the unit of SI ( ): in the unit of CGS • All specifications are subject to change without notice. 001-02 / 20081209 / e331.fm (11/31) NEOREC50F DEMAGNETIZATION CURVE 3.0 5.0 B-H Curve J-H Curve 0.7 [mT ] 2.0 (kG) – B/H 1.5 1.0 15 1500 20˚C 60˚C 100˚C 140˚C 0.5 1000 5 500 0 0 B, J 10 0.3 (BH) max [kJ/m3 ] 400 320 240 160 (kOe) [kA/m] –20 –15 1500 –10 1250 1000 750 –H 0 –5 500 250 0 MAGNETIC CHARACTERISTICS Residual flux density Br Coercive force HCB Intrinsic coercive force HCJ Maximum energy product (BH)max [mT] (kG) [kA/m] (kOe) [kA/m] (kOe) [kJ/m3] (MGOe) 1430±30 14.3±0.3 876±56 11.0±0.7 >876 >11.0 390±16 49±2 • [ ]: in the unit of SI ( ): in the unit of CGS • All specifications are subject to change without notice. 001-02 / 20081209 / e331.fm (12/31) NEOREC47B DEMAGNETIZATION CURVE 3.0 5.0 [mT ] 2.0 (kG) – B/H 1.5 1.0 15 1500 B-H Curve J-H Curve 0.7 20˚C 60˚C 100˚C 140˚C 0.5 1000 5 500 0 0 B, J 10 0.3 (BH) max [kJ/m3 ] 400 320 240 160 (kOe) [kA/m] –20 –15 1500 –10 1250 1000 750 –H 0 –5 500 250 0 MAGNETIC CHARACTERISTICS Residual flux density Br Coercive force HCB Intrinsic coercive force HCJ Maximum energy product (BH)max [mT] (kG) [kA/m] (kOe) [kA/m] (kOe) [kJ/m3] (MGOe) 1390±30 13.9±0.3 1035±56 13.0±0.7 >1114 >14.0 366±16 46±2 • [ ]: in the unit of SI ( ): in the unit of CGS • All specifications are subject to change without notice. 001-02 / 20081209 / e331.fm (13/31) NEOREC45F DEMAGNETIZATION CURVE 3.0 5.0 [mT ] 2.0 (kG) – B/H 1.5 1.0 15 1500 B-H Curve J-H Curve 0.7 20˚C 60˚C 100˚C 140˚C 0.5 1000 5 500 0 0 B, J 10 0.3 (BH) max [kJ/m3 ] 400 320 240 160 (kOe) [kA/m] –20 –15 1500 –10 1250 1000 750 –H 0 –5 500 250 0 MAGNETIC CHARACTERISTICS Residual flux density Br Coercive force HCB Intrinsic coercive force HCJ Maximum energy product (BH)max [mT] (kG) [kA/m] (kOe) [kA/m] (kOe) [kJ/m3] (MGOe) 1360±30 13.6±0.3 1011±56 12.7±0.7 >1114 >14.0 350±16 44±2 • [ ]: in the unit of SI ( ): in the unit of CGS • All specifications are subject to change without notice. 001-02 / 20081209 / e331.fm (14/31) NEOREC47H DEMAGNETIZATION CURVE 3.0 5.0 [mT ] 2.0 (kG) – B/H 1.5 1.0 15 1500 B-H Curve J-H Curve 0.7 20˚C 60˚C 100˚C 140˚C 0.5 1000 5 500 0 0 B, J 10 0.3 (BH) max [kJ/m3 ] 400 320 240 160 (kOe) [kA/m] –20 –15 1500 1250 –10 1000 750 –H 0 –5 500 250 0 MAGNETIC CHARACTERISTICS Residual flux density Br Coercive force HCB Intrinsic coercive force HCJ Maximum energy product (BH)max [mT] (kG) [kA/m] (kOe) [kA/m] (kOe) [kJ/m3] (MGOe) 1390±20 13.9±0.2 1067±48 13.4±0.6 1273 16.0 374±16 47.0±2.0 • [ ]: in the unit of SI ( ): in the unit of CGS • All specifications are subject to change without notice. 001-02 / 20081209 / e331.fm (15/31) NEOREC44H DEMAGNETIZATION CURVE 3.0 5.0 [mT ] 2.0 (kG) – B/H 1.5 1.0 15 1500 B-H Curve J-H Curve 0.7 20˚C 60˚C 100˚C 140˚C 0.5 1000 5 500 0 0 B, J 10 0.3 (BH) max [kJ/m3 ] 400 320 240 160 (kOe) [kA/m] –20 –15 1500 –10 1250 1000 750 –H 0 –5 500 250 0 MAGNETIC CHARACTERISTICS Residual flux density Br Coercive force HCB Intrinsic coercive force HCJ Maximum energy product (BH)max [mT] (kG) [kA/m] (kOe) [kA/m] (kOe) [kJ/m3] (MGOe) 1360±30 13.6±0.3 1003±56 12.6±0.7 >1353 >17.0 350±16 44±2 • [ ]: in the unit of SI ( ): in the unit of CGS • All specifications are subject to change without notice. 001-02 / 20081209 / e331.fm (16/31) NEOREC41H DEMAGNETIZATION CURVE 3.0 5.0 [mT ] 2.0 (kG) – B/H 1.5 1.0 15 1500 B-H Curve J-H Curve 0.7 20˚C 60˚C 100˚C 140˚C 0.5 1000 5 500 0 0 B, J 10 0.3 (BH) max [kJ/m3 ] 400 320 240 160 (kOe) [kA/m] –20 –15 1500 –10 1250 1000 750 –H 0 –5 500 250 0 MAGNETIC CHARACTERISTICS Residual flux density Br Coercive force HCB Intrinsic coercive force HCJ Maximum energy product (BH)max [mT] (kG) [kA/m] (kOe) [kA/m] (kOe) [kJ/m3] (MGOe) 1300±30 13.0±0.3 971±56 12.2±0.7 >1353 >17.0 326±16 41±2 • [ ]: in the unit of SI ( ): in the unit of CGS • All specifications are subject to change without notice. 001-02 / 20081209 / e331.fm (17/31) NEOREC42SH DEMAGNETIZATION CURVE 3.0 5.0 [mT ] 2.0 (kG) – B/H 1.5 1.0 15 1500 B-H Curve B-H特性 J-H Curve J-H特性 0.7 20˚C 60˚C 100˚C 140˚C 0.5 180˚C 1000 5 500 0 0 B, J 10 0.3 (BH) max [kJ/m3 ] 400 320 240 160 (kOe) [kA/m] –20 –15 1500 1250 –10 1000 750 –H 0 –5 500 250 0 MAGNETIC CHARACTERISTICS Residual flux density Br Coercive force HCB Intrinsic coercive force HCJ Maximum energy product (BH)max [mT] (kG) [kA/m] (kOe) [kA/m] (kOe) [kJ/m3] (MGOe) 1300±30 13.0±0.3 979±56 12.3±0.7 >1671 >21.0 326±16 41±2 • [ ]: in the unit of SI ( ): in the unit of CGS • All specifications are subject to change without notice. 001-02 / 20081209 / e331.fm (18/31) NEOREC38SH DEMAGNETIZATION CURVE 3.0 5.0 [mT] 2.0 (kG) – B/H 1.5 1.0 15 1500 B-H Curve J-H Curve 0.7 20˚C 60˚C 100˚C 0.5 140˚C 10 1000 B, J 180˚C 0.3 5 500 0 0 (BH) max [kJ/m3 ] 400 320 240 160 (kOe) [kA/m] –20 –15 1500 –10 1250 1000 750 –H 0 –5 500 250 0 MAGNETIC CHARACTERISTICS Residual flux density Br Coercive force HCB Intrinsic coercive force HCJ Maximum energy product (BH)max [mT] (kG) [kA/m] (kOe) [kA/m] (kOe) [kJ/m3] (MGOe) 1260±30 12.6±0.3 939±56 11.8±0.7 >1671 >21.0 302±16 38±2 • [ ]: in the unit of SI ( ): in the unit of CGS • All specifications are subject to change without notice. 001-02 / 20081209 / e331.fm (19/31) NEOREC40UH DEMAGNETIZATION CURVE 3.0 5.0 [mT ] 2.0 (kG) – B/H 1.5 1.0 15 1500 B-H Curve J-H Curve 0.7 20˚C 60˚C 100˚C 140˚C 0.5 180˚C 10 1000 B, J 200˚C 0.3 5 500 0 0 (BH) max [kJ/m3 ] 400 320 240 160 (kOe) [kA/m] –20 –15 1500 1250 –10 1000 750 –H 0 –5 500 250 0 MAGNETIC CHARACTERISTICS Residual flux density Br Coercive force HCB Intrinsic coercive force HCJ Maximum energy product (BH)max [mT] (kG) [kA/m] (kOe) [kA/m] (kOe) [kJ/m3] (MGOe) 1290±30 12.9±0.3 995±56 12.5±0.7 1990 25 310±16 39±2 • [ ]: in the unit of SI ( ): in the unit of CGS • All specifications are subject to change without notice. 001-02 / 20081209 / e331.fm (20/31) NEOREC38UH DEMAGNETIZATION CURVE 3.0 5.0 [mT ] 2.0 (kG) – B/H 1.5 1.0 15 1500 B-H Curve B-H特性 J-H Curve J-H特性 0.7 20˚C 60˚C 100˚C 140˚C 0.5 180˚C 10 1000 B, J 200˚C 0.3 5 500 0 0 (BH) max [kJ/m3 ] 400 320 240 160 (kOe) [kA/m] –20 –15 1500 1250 –10 1000 750 –H 0 –5 500 250 0 MAGNETIC CHARACTERISTICS Residual flux density Br Coercive force HCB Intrinsic coercive force HCJ Maximum energy product (BH)max [mT] (kG) [kA/m] (kOe) [kA/m] (kOe) [kJ/m3] (MGOe) 1260±30 12.6±0.3 963±56 12.1±0.7 1990 25 294±16 37±2 • [ ]: in the unit of SI ( ): in the unit of CGS • All specifications are subject to change without notice. 001-02 / 20081209 / e331.fm (21/31) NEOREC35UH DEMAGNETIZATION CURVE 3.0 5.0 [mT ] 2.0 (kG) – B/H 1.5 1.0 15 1500 B-H Curve J-H Curve 0.7 20˚C 60˚C 100˚C 0.5 140˚C 10 1000 180˚C B, J 200˚C 0.3 5 500 0 0 (BH) max [kJ/m3 ] 400 320 240 160 (kOe) [kA/m] –20 –15 1500 –10 1250 1000 750 –H 0 –5 500 250 0 MAGNETIC CHARACTERISTICS Residual flux density Br Coercive force HCB Intrinsic coercive force HCJ Maximum energy product (BH)max [mT] (kG) [kA/m] (kOe) [kA/m] (kOe) [kJ/m3] (MGOe) 1200±30 12.0±0.3 931±48 11.7±0.6 >1990 >25.0 279±24 35±3 • [ ]: in the unit of SI ( ): in the unit of CGS • All specifications are subject to change without notice. 001-02 / 20081209 / e331.fm (22/31) NEOREC35UX DEMAGNETIZATION CURVE 3.0 5.0 [mT ] 2.0 (kG) – B/H 1.5 1.0 15 1500 B-H Curve J-H Curve 0.7 20˚C 60˚C 100˚C 0.5 140˚C 10 1000 180˚C B, J 200˚C 0.3 5 500 0 0 (BH) max [kJ/m3 ] 400 320 240 160 (kOe) [kA/m] –20 –15 1500 1250 –10 1000 750 –H 0 –5 500 250 0 MAGNETIC CHARACTERISTICS Residual flux density Br Coercive force HCB Intrinsic coercive force HCJ Maximum energy product (BH)max [mT] (kG) [kA/m] (kOe) [kA/m] (kOe) [kJ/m3] (MGOe) 1200±30 12.0±0.3 923±56 11.6±0.7 2388 30 271±16 34±2 • [ ]: in the unit of SI ( ): in the unit of CGS • All specifications are subject to change without notice. 001-02 / 20081209 / e331.fm (23/31) NEOREC30UX DEMAGNETIZATION CURVE 3.0 5.0 [mT ] 2.0 (kG) – B/H 1.5 1.0 15 1500 B-H Curve J-H Curve 0.7 20˚C 60˚C 0.5 100˚C 10 1000 140˚C 180˚C B, J 200˚C 0.3 5 500 0 0 (BH) max [kJ/m3 ] 400 320 240 160 (kOe) [kA/m] –20 –15 1500 –10 1250 1000 750 –H 0 –5 500 250 0 MAGNETIC CHARACTERISTICS Residual flux density Br Coercive force HCB Intrinsic coercive force HCJ Maximum energy product (BH)max [mT] (kG) [kA/m] (kOe) [kA/m] (kOe) [kJ/m3] (MGOe) 1150±30 11.5±0.3 876±56 11.0±0.7 >2388 >30.0 255±16 32±2 • [ ]: in the unit of SI ( ): in the unit of CGS • All specifications are subject to change without notice. 001-02 / 20081209 / e331.fm (24/31) NEOREC30EV DEMAGNETIZATION CURVE 3.0 5.0 [mT ] 2.0 (kG) – B/H 1.5 1.0 15 1500 B-H Curve J-H Curve 0.7 20˚C 100˚C 0.5 140˚C 10 160˚C 1000 180˚C B, J 200˚C 0.3 5 500 0 0 (BH) max [kJ/m3 ] 400 320 240 160 (kOe) [kA/m] –20 –15 1500 1250 –10 1000 750 –H 0 –5 500 250 0 MAGNETIC CHARACTERISTICS Residual flux density Br Coercive force HCB Intrinsic coercive force HCJ Maximum energy product (BH)max [mT] (kG) [kA/m] (kOe) [kA/m] (kOe) [kJ/m3] (MGOe) 1140±30 11.4±0.3 867±56 10.9±0.7 756∗ 9.5∗ 231±16 29±2 ∗ at 200 °C • [ ]: in the unit of SI ( ): in the unit of CGS • All specifications are subject to change without notice. 001-02 / 20081209 / e331.fm (25/31) NEOREC42B DEMAGNETIZATION CURVE 3.0 5.0 [mT ] 2.0 (kG) – B/H 1.5 1.0 15 1500 B-H Curve J-H Curve 0.7 20˚C 60˚C 100˚C 140˚C 0.5 1000 5 500 0 0 B, J 10 0.3 (BH) max [kJ/m3 ] 400 320 240 160 (kOe) [kA/m] –20 –15 1500 –10 1250 1000 750 –H 0 –5 500 250 0 MAGNETIC CHARACTERISTICS Residual flux density Br Coercive force HCB Intrinsic coercive force HCJ Maximum energy product (BH)max [mT] (kG) [kA/m] (kOe) [kA/m] (kOe) [kJ/m3] (MGOe) 1330±30 13.3±0.3 987±56 12.4±0.7 >1114 >14.0 334±16 42±2 • [ ]: in the unit of SI ( ): in the unit of CGS • All specifications are subject to change without notice. 001-02 / 20081209 / e331.fm (26/31) NEOREC40F DEMAGNETIZATION CURVE 3.0 5.0 [mT ] 2.0 (kG) – B/H 1.5 1.0 15 1500 B-H Curve J-H Curve 0.7 20˚C 60˚C 100˚C 140˚C 0.5 1000 5 500 0 0 B, J 10 0.3 (BH) max [kJ/m3 ] 400 320 240 160 (kOe) [kA/m] –20 –15 1500 –10 1250 1000 750 –H 0 –5 500 250 0 MAGNETIC CHARACTERISTICS Residual flux density Br Coercive force HCB Intrinsic coercive force HCJ Maximum energy product (BH)max [mT] (kG) [kA/m] (kOe) [kA/m] (kOe) [kJ/m3] (MGOe) 1300±30 13.0±0.3 963±56 12.1±0.7 >1114 >14.0 318±16 40±2 • [ ]: in the unit of SI ( ): in the unit of CGS • All specifications are subject to change without notice. 001-02 / 20081209 / e331.fm (27/31) NEOREC40H DEMAGNETIZATION CURVE 3.0 5.0 [mT ] 2.0 (kG) – B/H 1.5 1.0 15 1500 B-H Curve J-H Curve 0.7 20˚C 60˚C 100˚C 140˚C 0.5 1000 5 500 0 0 B, J 10 0.3 (BH) max [kJ/m3 ] 400 320 240 160 (kOe) [kA/m] –20 –15 1500 –10 1250 1000 750 –H 0 –5 500 250 0 MAGNETIC CHARACTERISTICS Residual flux density Br Coercive force HCB Intrinsic coercive force HCJ Maximum energy product (BH)max [mT] (kG) [kA/m] (kOe) [kA/m] (kOe) [kJ/m3] (MGOe) 1300±30 13.0±0.3 971±56 12.2±0.7 >1353 >17.0 318±16 40±2 • [ ]: in the unit of SI ( ): in the unit of CGS • All specifications are subject to change without notice. 001-02 / 20081209 / e331.fm (28/31) NEOREC37H DEMAGNETIZATION CURVE 3.0 5.0 [mT ] 2.0 (kG) – B/H 1.5 1.0 15 1500 B-H Curve J-H Curve 0.7 20˚C 60˚C 100˚C 0.5 140˚C 1000 5 500 0 0 B, J 10 0.3 (BH) max [kJ/m3 ] 400 320 240 160 (kOe) [kA/m] –20 –15 1500 –10 1250 1000 750 –H 0 –5 500 250 0 MAGNETIC CHARACTERISTICS Residual flux density Br Coercive force HCB Intrinsic coercive force HCJ Maximum energy product (BH)max [mT] (kG) [kA/m] (kOe) [kA/m] (kOe) [kJ/m3] (MGOe) 1240±30 12.4±0.3 923±56 11.6±0.7 >1353 >17.0 294±16 37±2 • [ ]: in the unit of SI ( ): in the unit of CGS • All specifications are subject to change without notice. 001-02 / 20081209 / e331.fm (29/31) NEOREC34SH DEMAGNETIZATION CURVE 3.0 5.0 [mT ] 2.0 (kG) – B/H 1.5 1.0 15 1500 B-H Curve J-H Curve 0.7 20˚C 60˚C 100˚C 0.5 140˚C 1000 B, J 180˚C 0.3 5 500 0 0 (BH) max [kJ/m3 ] 400 320 240 160 (kOe) [kA/m] –20 –15 1500 –10 1250 1000 750 –H 0 –5 500 250 0 MAGNETIC CHARACTERISTICS Residual flux density Br Coercive force HCB Intrinsic coercive force HCJ Maximum energy product (BH)max [mT] (kG) [kA/m] (kOe) [kA/m] (kOe) [kJ/m3] (MGOe) 1180±30 11.8±0.3 876±56 11.0±0.7 >1671 >21.0 271±16 34±2 • [ ]: in the unit of SI ( ): in the unit of CGS • All specifications are subject to change without notice. 001-02 / 20081209 / e331.fm (30/31) NEOREC31UH DEMAGNETIZATION CURVE 3.0 5.0 [mT ] 2.0 (kG) – B/H 1.5 1.0 15 1500 B-H Curve J-H Curve 0.7 20˚C 60˚C 0.5 100˚C 10 1000 140˚C 180˚C B, J 200˚C 0.3 5 500 0 0 (BH) max [kJ/m3 ] 400 320 240 160 (kOe) [kA/m] –20 –15 1500 –10 1250 1000 750 –H 0 –5 500 250 0 MAGNETIC CHARACTERISTICS Residual flux density Br Coercive force HCB Intrinsic coercive force HCJ Maximum energy product (BH)max [mT] (kG) [kA/m] (kOe) [kA/m] (kOe) [kJ/m3] (MGOe) 1120±30 11.2±0.3 867±48 10.9±0.6 >1990 >25.0 239±24 30±3 • [ ]: in the unit of SI ( ): in the unit of CGS • All specifications are subject to change without notice. 001-02 / 20081209 / e331.fm (31/31) NEOREC27UX DEMAGNETIZATION CURVE 3.0 5.0 [mT ] 2.0 (kG) – B/H 1.5 1.0 15 1500 B-H Curve J-H Curve 0.7 0.5 20˚C 60˚C 10 1000 100˚C 140˚C 180˚C B, J 200˚C 0.3 5 500 0 0 (BH) max [kJ/m3 ] 400 320 240 160 (kOe) [kA/m] –20 –15 1500 –10 1250 1000 750 –H 0 –5 500 250 0 MAGNETIC CHARACTERISTICS Residual flux density Br Coercive force HCB Intrinsic coercive force HCJ Maximum energy product (BH)max [mT] (kG) [kA/m] (kOe) [kA/m] (kOe) [kJ/m3] (MGOe) 1080±30 10.8±0.3 819±56 10.4±0.7 >2388 >30.0 223±16 28±2 • [ ]: in the unit of SI ( ): in the unit of CGS • All specifications are subject to change without notice. 001-02 / 20081209 / e331.fm
© Copyright 2024 Paperzz