StackLight™
102 Series
The lens modules are available with LED,
Incandescent, Halogen or Strobe light sources.
Options for steady-on or flashing are available.
The 102 Series offers a shorter base for panel or
conduit mounting as well as a taller base,
designed for use with a sounder module.
Features and Specifications
• LED, Incandescent, Halogen and Strobe
light source
• Steady-on or flashing
• Six lens colors available
• Two optional IP54 sounders available:
- Single tone module (NEMA 4X)
- Multi-tone module, eight available tones (NEMA 4X)
• Sounder modules provide 89dB @ 1 meter/
79dB @ 10ft.
• Base and light modules are IP65 rated (NEMA 4X)
• Suitable for indoor and outdoor applications
• Option for panel or conduit mounting
• NEMA Type 3R and 4X enclosure
• Optional mounting not included
1
VISUAL SIGNALS
Edwards 102 Series StackLight is a unique
audible-visual signaling device that may contain
up to five light modules and a pulsating horn in a
single, integrated stack. Two optional sounder
modules are also available. The Triliptical
diffusion optic lens allows viewing from close up
while still projecting the light through use of a
built-in projection ring.
3"
R
A
Y
G
B
W
Ordering Information
Operating
Voltage
Description
Cat. No.
Base Unit - Use with
optional tone module
102TBS-N5
120V AC
0.60 A
102TBS-G1
24V DC
1.75 A
Mini base for
direct panel mount
102DMBS-N5
120V AC
0.60 A
102DMBS-G1
24V DC
1.75 A
102PMBS-N5
120V AC
0.60 A
102PMBS-G1
24V DC
1.75 A
Mini base for 3/4"
(19mm) conduit mount
1Currents
Current1
shown are for a stackable with 5 light modules.
AC
DC
AC/DC
IP54
3R 4X
ENCLOSURE
ENCLOSURE
89 dB
www.edwardssignaling.com
HALOGEN
INCAND.
LED
XENON
TM
1-33
StackLight™
102 Series
VISUAL SIGNALS
1
Ordering Information
Continued
Description
Cat. No.
Lens Module
Steady-on Halogen
Steady-on Incandescent
Flashing Halogen
Flashing Incandescent
Strobe
Steady-on LED
1NOTE: LED light sources must
2At nominal operating voltage.
Lens/LED Peak
Operating
Colors Candela
Voltage
Current
Lamp
Ratings
Lamp Life
Calculated2
Lamp Life
Projected3
Replacement
Lamp
102LM-A
—
—
Amber
—
—
—
—
—
102LM-B
—
—
Blue
—
—
—
—
—
102LM-C
—
—
Clear
—
—
—
—
—
102LM-G
—
—
Green
—
—
—
—
—
102LM-R
—
—
Red
—
—
—
—
—
102LM-Y
—
—
Yellow
—
—
—
—
—
120V AC
0.11 A
—
879
12 Watts
20,000 hr.
—
50LMP-12WH
50LMP-9WH
102LS-SINH-N5
102LS-SINH-G1
24V DC
0.32 A
—
653
9 Watts
12,000 hr.
—
102LS-SIN-N5
120V AC
0.08 A
—
829
10 Watts
2,500 hr.
—
50LMP-10W
102LS-SIN-G1
24V DC
0.32 A
—
829
10 Watts
10,000 hr.
—
Ind. Trade 3035
102LS-FINH-N5
120V AC
0.11 A
—
879
12 Watts
20,000 hr.
25,000 hr.
50LMP-12WH
102LS-FINH-G1
24V DC
0.32 A
—
653
9 Watts
12,000 hr.
15,000 hr.
50LMP-9WH
102LS-FIN-N5
120V AC
0.08 A
—
829
10 Watts
2,500 hr.
3,000 hr.
50LMP-10W
102LS-FIN-G1
24V DC
0.32 A
—
829
10 Watts
10,000 hr.
12,500 hr.
Ind. Trade 3035
102LS-ST-N5
120V AC
0.12 A
—
300,000
3 Joule
3,000 hr.4
—
—
hr.4
—
—
102LS-ST-G1
24V DC
0.30 A
102LS-SLEDA-N51
102LS-SLEDA-G11
120V AC
0.022 A
24V DC
0.062 A
102LS-SLEDB-N51
102LS-SLEDB-G11
120V AC
0.022 A
24V DC
0.062 A
102LS-SLEDG-N51
102LS-SLEDG-G11
120V AC
0.022 A
24V DC
0.062 A
102LS-SLEDR-N51
102LS-SLEDR-G11
120V AC
0.022 A
24V DC
0.062 A
102LS-SLEDW-N51
102LS-SLEDW-G11
120V AC
0.022 A
24V DC
0.062 A
—
300,000
3 Joule
3,000
Amber
—
—
120,000 hr.
—
—
Blue
—
—
120,000 hr.
—
—
Green
—
—
120,000 hr.
—
—
Red
—
—
120,000 hr.
—
—
Clear/
White
—
—
120,000 hr.
—
—
be used with the corresponding color lens module (e.g., a blue LED light source, 102LS-SLEDB-G1, must be used with a blue lens, 102LM-B).
3Projected
lamp life based on manufacturer's calc. lamp life @ 65 fpm and 50% duty cycle.
tube life @ operating power to 75% efficiency.
5User supplied
4Strobe
1-34
TM
www.edwardssignaling.com
StackLight™
102 Series
Continued
Description
Cat. No.
Flashing LED
Optional Tone
Module
1NOTE: LED light sources must
2At nominal operating voltage.
3Projected
Lens/LED Peak
Operating
Colors Candela
Voltage
Current
102LS-FLEDA-N51
102LS-FLEDA-G11
120V AC
0.022 A
24V DC
0.062 A
102LS-FLEDB-N51
102LS-FLEDB-G11
120V AC
0.022 A
24V DC
0.062 A
102LS-FLEDG-N51
102LS-FLEDG-G11
120V AC
0.022 A
24V DC
0.062 A
102LS-FLEDR-N51
102LS-FLEDR-G11
120V AC
0.022 A
24V DC
0.062 A
102LS-FLEDW-N51
102LS-FLEDW-G11
120V AC
0.022 A
24V DC
102SIGST-N5
102SIGST-G1
Lamp
Ratings
Lamp Life
Calculated2
Lamp Life
Projected3
Replacement
Lamp
Amber
—
—
120,000 hr.
—
—
Blue
—
—
120,000 hr.
—
—
Green
—
—
120,000 hr.
—
—
Red
—
—
120,000 hr.
—
—
0.062 A
Clear/
White
—
—
120,000 hr.
—
—
120V AC
0.05 A
—
—
—
—
—
—
24V DC
0.05 A
—
—
—
—
—
—
102SIGMT-N5
120V AC
0.05 A
—
—
—
—
—
—
102SIGMT-G1
24V DC
0.05 A
—
—
—
—
—
—
1
VISUAL SIGNALS
Ordering Information
be used with the corresponding color lens module (e.g., a blue LED light source, 102LS-SLEDB-G1, must be used with a blue lens, 102LM-B).
lamp life based on manufacturer's calc. lamp life @ 65 fpm and 50% duty cycle.
Ordering Information
Description
Cat. No.
Pre-Assembled Three High
Steady-On Incandescent Models
with pipe mount base
Operating Voltage
Lens Colors
102SIN-RGA-N5
120V AC
Red, Green, Amber
102SIN-RBA-N5
120V AC
Red, Blue, Amber
102SIN-RGA-G1
24V DC
Red, Green, Amber
102SIN-RBA-G1
24V DC
Red, Blue, Amber
Accessories
Description
Cat. No.
Pipe Mount Flange
102PMF
Pipe Extensions
(for use with Pipe
Mount Flange)
4"
102MP-4
10"
102MP-10
15"
102MP-15
Corner Mount Bracket
CBR
Wall Mount Bracket
WBR
102PMF
Pipe Mount Flange
CBR
Corner Mount Bracket
www.edwardssignaling.com
102MP-4
Pipe Extensions
102MP-10
Pipe Extensions
WBR
Wall Mount Bracket
TM
1-35
StackLight™
102 Series
PLC output to meet following product input parameters
Signal Input Load
Characteristics
These devices may be operated by PLCs with output characteristics that match the input load requirements of the signal.
VISUAL SIGNALS
1
Cat. No.
102SIGST-N5
Operating
Voltage
Max. Off State Leakage
Current (A)
Continuous On
Current (A)
Surge (inrush / duration)
120V AC
0.005
0.070
.35 A / .5 millisecond
102SIGST-G1
24V DC
0.005
0.050
.24 A / .2 millisecond
102SIGMT-N5
120V AC
0.005
0.070
.35 A / .5 millisecond
102SIGMT-G1
24V DC
0.005
0.050
.24 A / .2 millisecond
102LS-SIN-N5
120V AC
0.025
0.080
.15 A / 8 millisecond
102LS-SIN-G1
24V DC
0.025
0.032
.36 A / 1 millisecond
102LS-SINH-N5
120V AC
0.025
0.110
.5 A / 8 millisecond
102LS-SINH-G1
24V DC
0.025
0.320
.36 A / 1 millisecond
102LS-FIN-N5
120V AC
0.025
0.080
.3 A / 8 millisecond
1.4 A / 100 millisecond
102LS-FIN-G1
24V DC
0.025
0.032
102LS-FINH-N5
120V AC
0.025
0.110
1.15 A / 8 millisecond
102LS-FINH-G1
24V DC
0.025
0.320
1.2 A / 100 millisecond
102LS-ST-N5
120V AC
0.005
0.120
50 A / 1 millisecond
102LS-ST-G1
24V DC
0.0015
0.300
.33 A / 1 millisecond
102LS-SLED*-N5
120V AC
0.005
0.025
.09 A / 8 millisecond
102LS-SLED*-G1
24V DC
0.005
0.065
.025 A / 1 millisecond
102LS-FLED*-N5
120V AC
0.005
0.025
.09 A / 8 millisecond
102LS-FLED*-G1
24V DC
0.005
0.065
.07 A / 1 millisecond
*Letter in this position designates lens and LED color: A - amber, B - blue, G - green, R - red or W - white
1-36
TM
www.edwardssignaling.com
StackLight™
102 Series
Weights and Dimensions
Approx. Net
Weight (lb.)
Approx. Shipping
Weight (lb.)
0.38
0.38
0.33
0.70
0.70
0.70
0.70
0.70
0.70
0.70
0.70
0.70
0.70
0.70
0.70
0.70
0.70
0.83
1.14
0.31
0.38
0.38
0.58
0.26
0.26
0.26
0.26
0.26
1.44
1.44
1.44
1.44
0.40
0.40
0.45
0.45
0.45
0.48
0.48
0.43
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.83
1.14
0.31
0.48
0.48
0.68
0.36
0.36
0.36
0.36
0.36
1.61
1.61
1.61
1.61
0.50
0.50
0.55
0.55
0.55
102DMBS-G1
102DMBS-N5
102LM-*
102LS-FIN-G1
102LS-FINH-G1
102LS-FINH-N5
102LS-FIN-N5
102LS-FLED*-G1
102LS-FLED*-N5
102LS-SIN-G1
102LS-SINH-G1
102LS-SINH-N5
102LS-SIN-N5
102LS-SLED*-G1
102LS-SLED*-N5
102LS-ST-G1
102LS-ST-N5
102MP-10
102MP-15
102MP-4
102PMBS-G1
102PMBS-N5
102PMF
102SIGMT-DN-G1
102SIGMT-G1
102SIGMT-N5
102SIGST-G1
102SIGST-N5
102SIN-RBA-G1
102SIN-RBA-N5
102SIN-RGA-G1
102SIN-RGA-N5
102TBS-DN-G1
102TBS-DN-N5
102TBS-G1
102TBS-N5
102TBS-N5
1
VISUAL SIGNALS
Cat. No.
*Letter in this position designates lens/LED color: A - amber, B - blue, G - green, R - red, or W - clear/white
Part # 023001 Cap
(supplied with
base module)
1/2"
(13mm)
Part # 023001 Cap
(supplied with
base module)
Part # 023001 Cap
(supplied with
base module)
1/2"
(13mm)
15 1/2"
(394mm)
1/2"
(13mm)
12 1/8"
(308mm)
12 5/8"
(321mm)
3 5/8"
(92mm)
Signal Base
(Cat. No. 102TBS)
4 1/8"
(105mm)
3 5/8"
(92mm)
Signal Base
(Cat. No. 102PMBS)
dr_vs_TBSseries102_01.eps
www.edwardssignaling.com
Signal Base
(Cat. No. 102DMBS)
1 1/4"
(32mm)
1 3/4"
(44mm)
3"
(76mm)
3 5/8"
(92mm)
3"
(76mm)
dr_vs_PMSseries102_01.eps
Gasket
3"
(76mm)
dr_vs_DMBSseries102_01.eps
TM
1-37
StackLight™
102 Series
Technical Information
How to order Triliptical StackLight
1
To build a StackLight, one base unit and the required number of lens modules and light sources need to be ordered. For example, to build a
120V AC, two high, steady incandescent StackLight on a direct mount base, order (one) 102DMBS-N5, (two) 102LM (in required colors), and
(two) 102LS-SIN-N5.
+
VISUAL SIGNALS
102
Base
Unit
102
102
102
Lens
Modules
102
Cat. No.
102
1-38
Voltage
TBS
= Use with optional tone module. Wiring
terminals, 3/4" (19mm) conduit mount*
G1 = 24V DC
DMBS
= Mini base for direct panel mount*
N5 = 120V AC
PMBS
= Mini base for 3/4" (19mm) conduit mount*
*Cap included
+
—
SIGST
= Optional Single-Tone Module
SIGMT
= Optional Multi-Tone Module
+
Options
LM = Lens module
+
LS
Voltage
G1 = 24V DC
N5 = 120V AC
—
LM
Cat. No.
102
Light
Sources
Options
Cat. No.
102
Tone
Module
—
Lens Color
A = Amber
G = Green
B = Blue C = Clear
R = Red Y = Yellow
—
—
Type
Light
LS =
Light
Source
TM
SINH
= Steady-On halogen
FINH
= Flashing halogen
SIN
= Steady-On standard
incandescent
FIN
= Flashing standard
incandescent
ST
= Strobe
SLED
= Steady-On LED
FLED
= Flashing LED
Color
Voltage
(LED Only)
A = Amber
G1 = 24V DC
N5 = 120V AC
B = Blue
G = Green
R = Red
W = White
www.edwardssignaling.com