MODEL N° 90458
CO
PY
OWNER’S MANUAL
Keep this Product ID Number and use when contacting Customer Service:
REGISTER YOUR PRODUCT ONLINE AT WWW.LIFETIME.COM
At Lifetime, we are committed to providing innovative and quality products. While registering, you will
have the opportunity to give us your feedback. Your input is valuable to us.
t:PVDBOBMTPPQUJOUPSFDFJWFOFXQSPEVDUOPUJmDBUJPOTPSQSPNPUJPOT
t*OUIFVOMJLFMZFWFOUPGBQSPEVDUSFDBMMPSTBGFUZNPEJmDBUJPOZPVSSFHJTUSBUJPOQSPWJEFTUIF
JOGPSNBUJPOXFOFFEUPOPUJGZZPVEJSFDUMZ
t3FHJTUSBUJPOJTGBTUFBTZBOEDPNQMFUFMZWPMVOUBSZ
Lifetime’s Promise to You:
.BJOUBJOJOHZPVSQSJWBDZJTPVSMPOHTUBOEJOHQPMJDZBU-JGFUJNF"OEZPVDBOSFTUBTTVSFEUIBU
-JGFUJNFXJMMOPUTFMMPSQSPWJEFZPVSQFSTPOBMEBUBUPPUIFSUIJSEQBSUJFTPSBMMPXUIFNUPVTFZPVS
QFSTPOBMEBUBGPSUIFJSPXOQVSQPTFT
8FJOWJUFZPVUPSFBEPVSQSJWBDZQPMJDZBUXXXMJGFUJNFDPN
REGISTER today!
PY
Save this owner’s manual for future reference and in the event that
the manufacturer has to be contacted.
ID:
CO
Questions or Missing Parts?
504"7&5*.&8)&/$0/5"$5*/($6450.&34&37*$&1-&"4&)"7&5)&130%6$5*%
"7"*-"#-&#&'03&:06$"--*54-0$"5&%"55)&#0550.-&'5$03/&30'5)&'30/5
1"(&0'5)*4."/6"-
**U.S. and Canada customers ONLY**
'03$6450.&340654*%&5)&6403$"/"%"1-&"4&$0/5"$5
5)&4503&'03"44*45"/$&
DO NOT CONTACT THE STORE!
CALL OUR CUSTOMER SERVICE DEPARTMENT at
1 (800) 225-3865
)0634BNUPQN.POEBZUISPVHI'SJEBZ.PVOUBJO4UBOEBSE5JNF
$BMMPSWJTJUPVS8FCTJUFGPS4BUVSEBZIPVST
INSTRUCTION #1140955 C
2
1/10/2014
SAFETY INSTRUCTIONS
FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY OR PROPERTY
DAMAGE AND WILL VOID WARRANTY.
5PFOTVSFTBGFUZEPOPUBUUFNQUUPBTTFNCMFUIJTQSPEVDUXJUIPVUSFBEJOHBOE
GPMMPXJOHBMMJOTUSVDUJPOTDBSFGVMMZ$IFDLUIFFOUJSFCPYBOEJOTJEFBMMQBDLJOH
NBUFSJBMTGPSQBSUTBOEPSBEEJUJPOBMJOTUSVDUJPONBUFSJBM#FGPSFCFHJOOJOHBTTFNCMZ
JEFOUJGZBOEJOWFOUPSZBMMQBSUTBOEIBSEXBSFVTJOHUIFQBSUTBOEIBSEXBSFMJTUTBOE
JEFOUJmFSTJOUIJTEPDVNFOU1SPQFSBOEDPNQMFUFBTTFNCMZVTFBOETVQFSWJTJPO
BSFFTTFOUJBMGPSQSPQFSPSJFOUBUJPOBOEUPSFEVDFUIFSJTLPGBDDJEFOUPSJOKVSZ"
IJHIQSPCBCJMJUZPGTFSJPVTJOKVSZFYJTUTJGUIJTQSPEVDUJTOPUJOTUBMMFENBJOUBJOFE
BOEPSPQFSBUFEQSPQFSMZ'BJMVSFUPDPNQMZXJUIBOZPGUIFXBSOJOHTJOUIJT
JOTUSVDUJPONBOVBMNBZSFTVMUJOTFSJPVTQFSTPOBMJOKVSJFTTVDIBTDVUTCSPLFO
CPOFTOFSWFEBNBHFQBSBMZTJTCSBJOJOKVSZPSEFBUI'BJMVSFUPDPNQMZNBZBMTP
SFTVMUJOQSPQFSUZEBNBHF1MFBTFIFFEBMMXBSOJOHTBOEDBVUJPOT
t6TFFYUSFNFDBVUJPOXIJMFVTJOHBMBEEFSEVSJOHBTTFNCMZ
t5ISFFDBQBCMFBEVMUTBSFSFDPNNFOEFEGPSUIJTPQFSBUJPO
t#FGPSFEJHHJOHDPOUBDUVUJMJUZDPNQBOZUPMPDBUFVOEFSHSPVOEQPXFSDBCMFTHBT
BOEXBUFSMJOFT&OTVSFUIBUUIFSFBSFOPPWFSIFBEQPXFSMJOFTXJUIJOGUN
SBEJVTPG1PMFMPDBUJPO
Most injuries are caused by misuse and/or not following instructions. Use caution when using this product.
BEFORE BEGINNING ASSEMBLY
,FFQUIFIBSEXBSFCBHTBOEUIFJSDPOUFOUTTFQBSBUF*GBOZQBSUT
BSFNJTTJOHDBMMPVS$VTUPNFS4FSWJDF%FQBSUNFOU
*EFOUJGZBOEJOWFOUPSZBMMQBSUTBOEIBSEXBSFVTJOHUIFQBSUTBOE
IBSEXBSFMJTUTBOEJEFOUJmFSTJOUIJTEPDVNFOU
5FTUmUBMM#PMUTCZJOTFSUJOHUIFNJOUPUIFJSSFTQFDUJWFIPMFT*G
OFDFTTBSZDBSFGVMMZTDSBQFBXBZBOZFYDFTTQPXEFSDPBUJOH
CVJMEVQGSPNJOTJEFUIFIPMFT%POPUTDSBQFBXBZBMMPGUIF
QPXEFSDPBUJOH#BSFNFUBMNBZSVTU:PVNBZOFFEUPQPVOE
TPNF#PMUTJOUPQMBDFXJUIBIBNNFSPSNBMMFU
3
SAFE HANDLING OF GLASS BACKBOARDS
BEFORE & DURING ASSEMBLY
5IPSPVHIMZJOTQFDUUIF#BDLCPBSECFGPSFCFHJOOJOHBTTFNCMZ%POPUVTFUIF#BDL
CPBSEJGUIFSFBSFBOZDIJQTDSBDLTPSPUIFSEFGFDUTJOUIFCPBSE$BMMPVS$VTUPNFS
4FSWJDF%FQBSUNFOUJGBOZQSPCMFNTBSFGPVOE
6TFFYUSFNFDBVUJPOXIFOIBOEMJOHPSXPSLJOHBSPVOEUIF#BDLCPBSE
,FFQUPPMTIBSEXBSFBOEPUIFSTIBSQBOEIFBWZPCKFDUTBXBZGSPNUIF#BDLCPBSE
/FWFSSFTUUIF#BDLCPBSEEJSFDUMZPOBIBSETVSGBDFTVDIBTDPODSFUFPSQBWFNFOU
"MXBZTQMBDFDBSECPBSEPSPUIFSDVTIJPOJOHNBUFSJBMCFUXFFOUIF#BDLCPBSEBOEUIF
HSPVOEPSPUIFSIBSETVSGBDFT
"MXBZTMBZUIF#BDLCPBSEnBU/FWFSQMBDFJUJOBQPTJUJPOXIFSFJUNJHIUUJQPWFSBOECSFBL
(MBTTJTWFSZIFBWZ"MXBZTVTFBUMFBTUUXPBEVMUTXIFOQJDLJOHVQPSNPWJOHUIF
#BDLCPBSE
GENERAL HANDLING & CARE
*OTQFDUUIF#BDLCPBSECFGPSFFBDIVTF%POPUVTFUIF#BDLCPBSEJGUIFSFBSFBOZ
DIJQTDSBDLTPSPUIFSEFGFDUTJOUIFCPBSE*GBOZTJHOTPGEBNBHFBSFGPVOEGPMMPX
UIFJOTUSVDUJPOTGPSi)BOEMJOH#SPLFO(MBTTwCFMPX
6TFFYUSFNFDBVUJPOXIFOIBOEMJOHPSXPSLJOHBSPVOEUIF#BDLCPBSE
5IF#BDLCPBSEXBTEFTJHOFEGPSVTFXJUIB#BTLFUCBMM%POPUVTFPUIFSUZQFTPG
CBMMTPSPUIFSPCKFDUTXJUIUIFTZTUFN%POPUVTFUIJTTZTUFNGPSBOZQVSQPTFPUIFS
UIBOJUTEFTJHOFEQVSQPTF
HANDLING BROKEN GLASS
At the first sign of breakage:
,FFQFWFSZPOFFTQFDJBMMZDIJMESFOBXBZGSPNUIFJNNFEJBUFBSFBPGUIF#BDLCPBSE
1VUPOFZFQSPUFDUJPOBOEXFBSUIJDLVUJMJUZHMPWFTBOEMPOHTMFFWFT4NBMMQJFDFTPG
UFNQFSFEHMBTTNBZQPQPVUPGUIF#BDLCPBSE
-PXFSUIF#BDLCPBSEUPJUTMPXFTUIFJHIUBOEDPNQMFUFMZDPWFSUIF#BDLCPBSEXJUIBUBSQ
%POPUSFNPWFUIF#BDLCPBSEGSPNUIFTZTUFNXJUIPVUmSTUMPXFSJOHUIFTZTUFNUP
JUTMPXFTUTFUUJOH$BSFGVMMZSFBEBOEGPMMPXUIFi3FNPWJOH#BDLCPBSEGSPN4ZTUFNw
JOTUSVDUJPOTCFMPX
REMOVING BACKBOARD FROM SYSTEM
WARNING
"UleastUISFFBEVMUTBSFSFRVJSFEUPDPNQMFUFUIFTFTUFQT5XPBEVMUTBSFSFRVJSFEUP
TVQQPSUBOEMPXFSUIF#BDLCPBSEUISPVHIPVUUIFFOUJSFQSPDFTT6TFFYUSFNFDBVUJPO
XIFOTUBOEJOHPOMBEEFSTUPQFSGPSNBTTFNCMZTUFQT'PMMPXBMMXBSOJOHTBOEDBVUJPOT
POUIFMBEEFS'BJMVSFUPGPMMPXBMMPGUIFTFJOTUSVDUJPOTBOEXBSOJOHTDPVMEMFBEUPTFSJPVT
QFSTPOBMJOKVSZPSQSPQFSUZEBNBHFNFOUJPOFEJOUIFi4BGFUZ*OTUSVDUJPOTw
-PXFSUIF#BDLCPBSEUPJUTMPXFTUTFUUJOH
8IJMFUXPBEVMUTPOMBEEFSTIPMEUIFCPBSEBUIJSEQFSTPOTIPVMESFNPWFUIFCPMUT
OVUTBOEXBTIFSTUIBUDPOOFDUUIF#BDLCPBSEUPUIF&YUFOTJPO"SNT
$BSFGVMMZMPXFSUIF#BDLCPBSEUPUIFHSPVOE
4FUBTJEFUIF3JNBOEBMMIBSEXBSFGPSSFBTTFNCMJOHUIFSFQMBDFNFOU#BDLCPBSE
4
TOOLS AND PARTS REQUIRED FOR THIS ASSEMBLY
1/2” Socket Wrench
9/16” Wrench
3/4” Socket Wrench
1/4” Allen Wrench
Cement Mix
Phillips Screwdriver
5/16” Allen Wrench
9/16” Socket Wrench
3/8” Alen Wrench
Level
Ladder
Shovel
Tape Measure
ó#BHTMCFBDI
Rebar
Rubber Mallet
Tape
w
Wood Block
Bricks
BUMFBTU
Electric Drill
*Three adults required to
complete assembly*
Only adults should set up the product. Do not allow children
in the setup area until assembly is complete.
5
ASSEMBLY GUIDES
Refer to the following areas throughout the instructions
to assist in the assembly process:
This area is located at the top,
left-hand corner of the page
and indicates which tools
and hardware are needed to
complete the assembly steps
on a page.
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
This area is usually located in the
bottom, left-hand corner of a step
and indicates that special attention
is needed to perform a particular
part of a step.
!
These areas are usually located in
the bottom, right-hand corner of a
step and indicate that damage to
the product or serious injury may
occur if the caution or warning is
not heeded.
Note:
CAUTION
WARNING
6
PARTS LIST
ID
"-)
"-'
"-&
",%
%*3
#(1
%+"
#-$
%*6
",'
",(
"-9
"+*
",*
",;
"."
$:"
".5
",1
"-#(3
#(:
"-.
%*0
"2$
#(8
Item Description
5PQ1PMF
.JEEMF1PMF
#PUUPN1PMF
6QQFS&YUFOTJPO"SN
.JEEMF&YUFOTJPO"SN
-PXFS&YUFOTJPO"SN
3JN.PVOU#SBDLFU
5JF1MBUF
1PXFS'MFY4QSJOH"TTFNCMZ
(BT4QSJOH
(BT4QSJOH$PWFS
3JN
#BDLCPBSE
)BOEMF
/FU
3JN$PWFS1MBUF
)BOEMF#SBDLFU
8BSOJOH4UJDLFS"QQMJFEUP.JEEMF1PMF
)FJHIU4UJDLFS
1PMF#SBDLFU
8BTIFS1MBUF
3JN*NQBDU4QBDFS
1PMF$BQ
5VCF$BQ
&YUFOTJPO"SN$BQ
"MJHONFOU'SBNF
7
Qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
6
1
HARDWARE LIST
ID
Item Description
BCO
Pole Assembly Hardware [Blister Pack]
$5:
"/&
$6#
$.7
wYw#PMU
wYw4QBDFS
w/ZMPDL/VU
Yw4FMG%SJMMJOH4DSFX
BCS
Backboard & Rim Assembly Hardware [Blister Pack]
"/+
"#'
"#%
"#,
"%9
"2#
wYw)FY#PMU
w3VCCFS8BTIFS
w'MBU8BTIFS
w/ZMPDL'MBOHFE/VU
Yw1BO)FBE4DSFX
wYw5ISFBE$VUUJOH#PMU
BCR
Backboard to Pole Assembly Hardware, Part 1 [Blister Pack]
"/;
"#1
"&(
$:'
""/
"2#
wYw4QBDFS
wYw1PMZ4QBDFS
w1MBTUJD8BTIFS
w/ZMPDL/VU
w$BQ/VU
wYw5ISFBE$VUUJOH#PMU
EBQ
Qty
6
4
4
4
6
1
BCT
Handle Assembly Hardware, Part 1 [Blister Pack]
"&)
"/;
"&(
%*)
$:(
&#0
""9
$:/
%*/
w1MBTUJD8BTIFS
wYw4QBDFS
w1MBTUJD8BTIFS
wYw#PMU
w/ZMPDL/VU
w&$MJQ
w$FOUFSMPDL/VU
w/ZMPDL/VU
5SJHHFS1JO
EBR
1
Backboard to Pole Assembly Hardware, Part 2 [Poly Bag]
$6( wYw#PMU
$:5 wYw#PMU
"+; %BSL-JUIJVN(SFBTF
%9%'3
&#1
%*2
%*+
",)
4
6
1
1
3
1
1
1
Handle Assembly Hardware, Part 2 [Poly Bag]
wYw#PMU
wYw#PMU
wYw4USBJHIU1JO
w-BSHF1MBTUJD4QBDFS
w4UFFM4QBDFS
8IJUF4JMJDPOF(SFBTF
8
1
1
3
4
1
PARTS IDENTIFIER
Parts shown at 10% of Actual Size
AKZY
/FU
ALXY
3JN
AKFY
AKGY
(BT4QSJOH
(BT4QSJOH$PWFS
AKDY
6QQFS&YUFOTJPO"SN
AKIY
DIRY
)BOEMF
.JEEMF&YUFOTJPO"SN
BGPY
-PXFS&YUFOTJPO"SN
DIUY
1PXFS'MFY4QSJOH"TTFNCMZ
BGWY
"MJHONFOU'SBNF
9
PARTS IDENTIFIER
Part shown at 10% of Actual Size
ALHY
5PQ1PMF
ALFY
.JEEMF1PMF
ALEY
#PUUPN1PMF
Part shown at 5% of Actual Size
AJIY
#BDLCPBSE
Parts shown at Actual Size
AQCY
&YUFOTJPO"SN$BQ
DIOY
5VCF$BQ
10
PARTS IDENTIFIER
Parts shown at 25% of Actual Size
BGRY
8BTIFS1MBUF
BGYY
ALMY
3JN*NQBDU4QBDFS
1PMF$BQ
AMAY
3JN$PWFS1MBUF
ALLY
CYAY
1PMF#SBDLFU
1109025
7’6”
8’
8’6”
9’
9’6”
10’
)BOEMF#SBDLFU
AKPY
)FJHIU4UJDLFS
DJAY
3JN.PVOU#SBDLFU
BLCY
5JF1MBUF
HARDWARE
BCO
BCS
EBQ
EBR
BCR
11
BCT
SEC
1
GROUND PREPARATION
HARDWARE REQUIRED
NO HARDWARE REQUIRED FOR THIS PAGE
PARTS REQUIRED
Parts shown at 10% of actual size
ALEY
#PUUPN1PMF
BGWY
"MJHONFOU'SBNF
TOOLS REQUIRED
30” Rebar
Electric Drill
Level
Tape Measure
Shovel
Tape
12
Cement Mix
Bricks
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
NO HARDWARE REQUIRED FOR THIS PAGE
SEC
1.1
!
%JHBSPVOEIPMFwEFFQBOEwJOEJBNFUFS*GZPVMJWFJOBOBSFB
XIFSFGSPTUIFBWFTNBZQPTFBQSPCMFNDPOTVMUZPVSMPDBMCVJMEJOH
JOTQFDUPSUPEFUFSNJOFUIFQSPQFSIPMFEFQUI5IFFEHFPGUIFIPMF
TIPVMECFnVTIXJUIUIFFEHFPGUIFQMBZJOHTVSGBDF
Note: A Ground Sleeve is available as an alternative to cementing
the Pole into the ground. Please contact Customer Service for
more information.
13
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
NO HARDWARE REQUIRED FOR THIS PAGE
SEC
1.2
.BLFBNBSLwGSPNUIFEJNQMFEFOEPGUIFBottom Pole (ALE)EP
OPUTDSBUDIUIFQPXEFSDPBUJOH
4MJEFUIFAlignment Frame (BGW)PWFS
UIF#PUUPN1PMF
15.5”
BGW
ALE
SEC
1.3
ALE
1MBDFFOPVHICSJDLTJOUIFCPUUPNPGUIFIPMFTPUIFSFJTFYBDUMZ
wGSPNUIFQMBZJOHTVSGBDFUPUIFUPQPGUIFCSJDLT
1MBDFBUMFBTUUXPCSJDLTTJEFCZTJEFJOUIFIPMFTPUIFSFJTFOPVHI
SPPNGPSUIF1PMFUPSFTUPOUIFCSJDLT
15.5”
14
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
NO TOOLS OR HARDWARE REQUIRED FOR THIS PAGE
SEC
1.4
4MJEFUIFEJNQMFEFOEPGUIFBottom Pole (ALE)JOUPUIFIPMFVQUPUIF
JODINBSL4FUUIFCPUUPNPGUIF1PMFPOUIFCSJDLTJOUIFIPMF
1PTJUJPOUIFQPMFOFYUUPUIFQMBZJOHTVSGBDF
WARNING
%POPUQVUZPVSIBOETVOEFSUIF1PMFPS1PMF
$BQXIJMFQMBDJOHUIF1PMFPOUIF#SJDLT
SEC
1.5
5PTRVBSFZPVSTZTUFNUPUIFQMBZJOHTVSGBDFUIFAlignment Frame (BGW)
TIPVMEDSPTTUIFQMBZJOHTVSGBDFBUTBNFQPJOUPOCPUITJEFT
Playing
Surface
TOP VIEW
BGW
ALE
15
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
ó#BHTMCFBDI
NO HARDWARE REQUIRED FOR THIS PAGE
SEC
1.6
!
.JYUXPCBHTPGDPODSFUFBOEQPVSJUJOUPUIFIPMF$POUJOVFUPNJY
BOEQPVSDPODSFUFBTOFFEFEVOUJMUIFIPMFJTmMMFE
Note: Use a Level to make sure the Bottom Pole is standing vertical. Form
the cement into a downward slope away from the pole to allow water runoff.
Failure to do so may result in premature rusting of the Pole.
16
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
30” Rebar
NO HARDWARE REQUIRED FOR THIS PAGE
SEC
1.7
*OTFSUUIFwSFCBSOPUJODMVEFE
JOTJEFUIFBottom Pole (ALE)TPJUJT
BCPVUwGSPNUIFUPQPGUIFQPMFCheck the pole several times within the
first hour to make sure that all sides are vertical and that the 15.5-inch mark
remains level with the surface.
Dimpled end
Rebar
WARNING
Do not continue the assembly until the concrete
has been allowed to set for 1-4 hours.
17
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
NO HARDWARE REQUIRED FOR THIS PAGE
SEC
1.8
.JYUIFSFNBJOJOHCBHPGDPODSFUF'JMMUIF#PUUPN1PMF
XJUIDPODSFUFVOUJMJUSFBDIFTUIFUPQPGUIFSFCBS5BNQUIF
DPODSFUFEPXOJOUIFBottom Pole (ALE)XJUIBCSPPNIBOEMF
UPSFNPWFBOZBJSQPDLFUT3FNFNCFSUPDMFBOBMMFYDFTT
DPODSFUFPGGUIFPVUTJEFTVSGBDFBOEJOTJEFTVSGBDFPGUIFQPMF
15”
SEC
1.9
$IFDLUIF1PMFUPNBLFTVSFJUJTWFSUJDBMUIFOTUBCJMJ[FUIF1PMF3FNPWF
BOEEJTDBSEUIFAlignment Frame (BGW)1FSJPEJDBMMZDIFDLUIF1PMFXJUIB
MFWFM
WARNING
Stop assembly now. Do not continue the
assembly until the concrete has been allowed
to set for at least 72 hours (3 days). In humid
climates or wet weather, allow more time for the
concrete to cure. Do not proceed until the curing
process is complete.
18
SEC
2
POLE ASSEMBLY
HARDWARE REQUIRED
BCO
Hardware shown at Actual Size
CTYY
wYw#PMU
ANEY
wYw4QBDFS
CUBY
w/ZMPDL+BN/VU
!
CMVY
Yw4FMG%SJMMJOH4DSFX
Note: Only one #10 x .62” Self-Drilling Screw (CMV) will be used
during this section of the assembly. Keep the remaining Screw
for use later in the assembly process.
19
SEC
2
POLE ASSEMBLY
PARTS REQUIRED
Parts shown at 10% of actual size
ALHY
5PQ1PMF
ALFY
.JEEMF1PMF
Part shown at 25% of actual size
ALLY
ALMY
1PMF#SBDLFU
1PMF$BQ
TOOLS REQUIRED
9/16” Wrench
5/16 Allen Wrench
20
Electric Drill
Wood Block
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
9/16”
ANEY
/PUUPTDBMF
5/16”
CUBY
CTYY
SEC
2.1
*OTFSUUIF3/8” x 4 1/2” Bolts (CTY)JOUPUIFTop Pole (ALH)BTTIPXO5IFO
TMJEFUIF1/2” x 3.91” Spacers (ANE)POUPUIF#PMUT4FDVSFUIFPole
Bracket (ALL)UPUIF1PMFXJUIUIF3/8” Nylock Nuts (CUB)
ALH
CTY
Large
holes
ANE
ALL
CUB
Small holes
!
Note: Make sure the Warning Sticker and the
Pole Bracket face opposite directions.
21
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
NO HARDWARE REQUIRED FOR THIS PAGE
SEC
2.2
*OTFSUUIFUBQFSFEFOEPGUIFMiddle Pole (ALF)JOUPUIFnBSFEFOEPGUIF
Top Pole (ALH)0SJFOUUIF1PMFTBTTIPXOTPUIFWarning Sticker (ALM)JT
POUIFPQQPTJUFTJEFPGUIFBTTFNCMZBTUIFPole Bracket (ALL)
ALH
ALF
22
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
Wood Block
NO HARDWARE REQUIRED FOR THIS PAGE
SEC
2.3
ATTENTION: THIS STEP CANNOT BE REVERSED!
*OPSEFSUPTFBUUIF1PMFTTUSJLFUIFFOEPGUIF1PMFWFSZIBSEmWFUPTJY
UJNFTPOBQJFDFPGTDSBQXPPE5IFTop Pole (ALH)TIPVMEDPNFEPXOVOUJM
JUDPWFSTUIFIPMFBUUIFUPQPGUIFMiddle Pole (ALF)BOEOPGVSUIFS
*GUIF5PQ1PMFEPFTOPUDPNQMFUFMZDPWFSUIFIPMFBUUIFUPQPGUIF.JEEMF
1PMFBGUFSTFBUJOHDO NOT COMPLETE ASSEMBLY$BMMPVS$VTUPNFS4FSWJDF
%FQBSUNFOU
ALH
6x
WARNING
ALF
The Poles must be seated together! Poles must
be struck on a hard surface five to six times!
Failure to seat the Poles correctly could allow the
Poles to separate during use, which could lead
to serious personal injuries or property damage.
!
Note: Do not hit your feet with the Pole sections,
as serious injury could occur.
23
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
CMVY
SEC
2.4
"GUFSUIF1PMFTIBWFCFFOTFBUFEJOTFSUPOF#10 x .62”Self-Drilling Screw
(CMV)JOUPUIFQJMPUIPMFPOUIFCBDLPGUIFTop Pole (ALH)BOEJOUPUIF
NFUBMPGUIFMiddle Pole (ALF)
ALH
CMV
ALF
!
!
Note: Chuck the Self-Tapping Screw
directly into an Electric Drill for easy
installation, or use a 3/8” Hex Driver.
Note: Only one #10 x .62” Self-Drilling Screw (CMV) will be used
during this section of the assembly. Keep the remaining Screw
for use later in the assembly process.
24
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
NO HARDWARE REQUIRED FOR THIS PAGE
SEC
*GJUJTOPUBMSFBEZJOQMBDFJOTFSUUIFPole Cap (ALM)JOUPUIFTop Pole (ALH)
2.5
ALM
ALH
ALF
25
SEC
3
BACKBOARD TO RIM ASSEMBLY
HARDWARE REQUIRED
BCS
Hardware shown
at Actual Size
ANJY
ABFY
ABDY
wYw)FY#PMU
w3VCCFS8BTIFS
w'MBU8BTIFS
ABKY
w/ZMPDL'MBOHFE/VU
ADXY
AQBY
Y1BO)FBE4DSFX
wYw
5ISFBEDVUUJOH#PMU
PARTS REQUIRED
Part shown at 5% of Actual Size
AJIY
#BDLCPBSE
Part shown at 10% of Actual Size
ALXY
3JN
26
SEC
3
BACKBOARD TO RIM ASSEMBLY
PARTS REQUIRED
Part shown at 25% of Actual Size
AMAY
DJAY
3JN$PWFS1MBUF
3JN.PVOU#SBDLFU
BGR (x1)
Washer Plate
BGYY
3JN*NQBDU4QBDFS
TOOLS REQUIRED
1/2” Wrench Y
Phillips Screwdriver
27
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
1/2” Y
ANJY
ABDY
SEC
3.1
"UUBDIUIFRim Mount Bracket (DJA)BOERim Spacer (BGY)UPUIFRim (ALX)
ALX
ANJ
ABD
BGY
WARNING
DJA
The Glass Backboard will break if the Rim Spacer
is not installed as shown in this step. This may
result in personal injury or property damage.
28
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
1/2”
ADXY
ABKY
SEC
3.2
"UUBDIUIFWasher Plate (BGR)UPUIF3JN"TTFNCMZ4FDVSFBMM#PMUT
UPUIF3JN"TTFNCMZXJUIUIFIBSEXBSFTIPXO
BGR
ABK
ABK
SEC
"UUBDIUIFRim Cover Plate (AMA)UPUIF3JN
3.3
ADX
AMA
29
ADX
ABK
ABK
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
1/2” Y
ANJY
ABDY
ABFY
ABKY
SEC
3.4
"UUBDIUIF3JN"TTFNCMZUPUIFBackboard (AJI) VTJOHUIFIBSEXBSF
TIPXO
ABK
AJI
ABF
Front View
Rear View
ABD
ANJ
ANJ
ABF
ABK
ABF
!
Note: Do not overtighten the hardware so that the
7/16”Rubber Washer bulges outward as shown.
30
Incorrect
ABF
Correct
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
1/2” Y
AQBY
ABKY
SEC
4FDVSFUIFRim Mount Bracket (DJA)UPUIF#BDLCPBSEXJUIUIF
IBSEXBSFTIPXO
3.5
DJA
AQB
ABK
ABK
31
AQB
SEC
4
BACKBOARD TO POLE ASSEMBLY
HARDWARE REQUIRED
Hardware shown at Actual Size
BCR
AQBY
ABPY
wYw5ISFBE
$VUUJOH#PMU
AEG9
wYw1PMZ4QBDFS
w1MBTUJD8BTIFS
CYFY
w/ZMPDL/VU
AANY
w$BQ/VU
ANZY
wYw4QBDFS
Hardware shown at Actual Size
EBQ
7”
CUGY
/PUBDUVBMMFOHUI
AJZY
wYw#PMU
%BSL-JUIJVN(SFBTF
CYTY
wYw#PMU
32
SEC
4
BACKBOARD TO POLE ASSEMBLY
PARTS REQUIRED
Parts shown at 10% of Actual Size
AKD (x2)
Upper Extension Arm
DIR (x2)
Middle Extension Arm
BGP (x2)
Lower Extension Arm
Parts shown at 25% of Actual Size
BLCY
5JF1MBUF
Parts shown at Actual Size
AQCY
&YUFOTJPO"SN$BQ
TOOLS REQUIRED
1/2” Socket Wrench Y
3/8” Allen Wrench
3/4” Socket Wrench
3/4” Wrench
33
Rubber Mallet
Ladder Y
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
NO HARDWARE REQUIRED FOR THIS PAGE
SEC
4.1
*OTFSUPOFFOEPGUIFTie Plate (BLC)JOUPUIFTMPUPOUIFLower Extension
Arm (BGP)BTTIPXO
BLC
BGP
SEC
4.2
*OTFSUUIFPQQPTJUFFOEPGUIFTie Plate (BLC)JOUPUIFTMPUPOUIFPUIFS
Lower Extension Arm (BGP)BTTIPXO*GOFFEFEVTFUIF3VCCFS.BMMFU
UPHFOUMZUBQUIF1MBUFJOUPQMBDF
BLC
BGP
34
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
1/2” Y
AQBY
AANY
SEC
4.3
"UUBDIUIFLower Extension Arms (BGP)UPHFUIFSXJUIUIFIBSEXBSFTIPXO
6TFBw4PDLFU8SFODIUPTDSFXUIF5/16” x 3/4” Thread-Cutting Bolts (AQB)
UISPVHIUIF-PXFS&YUFOTJPO"SNTBOEUIFTie Plate (BLC)
AQB
BLC
AAN
BGP
SEC
4.4
BGP
*OTFSUUIFExtension Arm Caps (AQC)JOUPUIFFOETPGUIF-PXFS&YUFOTJPO"SNT
BTTIPXO
AQC
!
SEC
Note: If Caps are already installed, move on to the next step.
AQC
3FQFBUTUFQTUPBTTFNCMFUIFMiddle Extension Arm (DIR)BTTFNCMZ
4.5
35
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
7”
3/4”
AEGY
3/8”
CUGY
AJZY
SEC
4.6
ABPY
CYFY
"QQMZDark Lithium Grease (AJZ)UPUIF1/2” x 7” Bolt (CUG)"UUBDIUIFLower
Extension Arms (BGP)UPUIFRim Mounting Bracket (DJA)POUIF#BDLCPBSEVTJOH
UIFIBSEXBSFTIPXO6TFUIF3VCCFS.BMMFUJGOFFEFEUPUBQUIF#PMU JOUP
QPTJUJPO
ABP
Apply Dark Lithium
Grease (AJZ)
ABP
CYF
CUG
!
AEG
Note: Tighten the 1/2” Nylock Nut (CYF) until it is flush with the end of the Bolt.
36
AEG
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
7”
3/4”
AEGY
3/8”
CUGY
AJZY
SEC
4.7
ABPY
CYFY
"QQMZDark Lithium Grease (AJZ)UPUIF1/2” x 7” Bolt (CUG)"UUBDIUIF
BTTFNCMFEMiddle Extension Arms (DIR)UPUIFRim Mounting Bracket (DJA)
ABP
Apply Dark Lithium
Grease (AJZ)
!
CUG
ABP
CYF
AEG
AEG
Note: Tighten the 1/2” Nylock Nut (CYF) until it is flush with the end of the Bolt.
37
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
3/4”
3/8”
CYTY
CYFY
AEGY
SEC
*OTFSUBO&YUFOTJPO"SN$BQJOUPUIFFOEPGUIFUpper Extension Arms (AKD)
4.8
AQC
AKD
AKD
!
AQC
Note: If Caps are already installed, move on to the next step.
SEC
"UUBDIUIFUpper Extension Arms (AKD)UPUIF#BDLCPBSE.BLFTVSFBMM
&YUFOTJPO"SNTDBOSPUBUFFBTJMZ
4.9
AKD
AKD
CYF
CYT
CYF
CYT
AEG
AKD
AKD
38
AEG
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
7”
3/4”
AEGY
3/8”
CUGY
AJZY
SEC
4.10
ANZY
CYFY
"QQMZDark Lithium Grease (AJZ)UPUIF1/2” x 7” Bolt (CUG)-JOFVQUIF1PMF$BQ
TUJSSVQTXJUIUIFIPMFTJOUIFUPQPGUIF1PMF"UUBDIUIFUpper Extension Arms
(AKD)UPUIF1PMFVTJOHUIFIBSEXBSFTIPXO
AKD
ANZ ANZ
AKD
CYF
AEG
CUG
AEG
Apply Dark Lithium
Grease (AJZ)
!
Note: Tighten the 1/2” Nylock Nut (CYF) until it is flush with the end of the Bolt.
39
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
7”
3/4”
AEGY
3/8”
CUGY
AJZY
SEC
4.11
ANZY
CYFY
"QQMZDark Lithium Grease (AJZ)UPUIF1/2” x 7” Bolt (CUG)"UUBDIUIFMiddle
Extension Arms (DIR)UPUIFPole (ALG)XJUIUIFIBSEXBSFTIPXO
DIR
DIR
ANZ
ANZ
CYF
AEG
AEG
CUG
Apply Dark Lithium
Grease (AJZ)
!
Note: Tighten the 1/2” Nylock Nut (CYF) until it is flush with the end of the Bolt.
40
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
7”
3/4”
AEGY
3/8”
CUGY
AJZY
SEC
4.12
ANZY
CYFY
"QQMZDark Lithium Grease (AJZ)UPUIF1/2” x 7” Bolt (CUG)"UUBDIUIFLower
Extension Arms (BGP)UPUIF1PMF
ANZ
ANZ
CYF
AEG
AEG
CUG
BGP
Apply Dark Lithium
Grease (AJZ)
!
Note: Tighten the 1/2” Nylock Nut (CYF) until it is flush with the end of the Bolts.
41
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
7”
3/4”
AEGY
3/8”
CUGY
CYFY
SEC
"UUBDIUIFIBSEXBSFTIPXOJOUIFMPDBUJPOJOEJDBUFE
4.13
CYF
CUG
!
AEG
AEG
Note: Tighten the 1/2” Nylock Nut (CYF) until it is flush with the end of the Bolt.
42
SEC
5
HANDLE ASSEMBLY
HARDWARE REQUIRED
Hardware shown
at Actual Size
BCT
DIHY
AEHY
wYw#PMU
w1MBTUJD8BTIFS
CYNY
AAXY
CYGY
w/ZMPDL/VU
w$FOUFSMPDL
/VU
w/ZMPDL/VU
DINY
5SJHHFS1JO
EBOY
ANZY
w&$MJQ
wYw4QBDFS
AEGY
w1MBTUJD8BTIFS
EBR
Hardware shown
at Actual Size
7”
DIQY
DXLY
w-BSHF1MBTUJD4QBDFS
/PUBDUVBMMFOHUI
wYw#PMU
43
SEC
5
HANDLE ASSEMBLY
HARDWARE REQUIRED (Continued)
Hardware shown at Actual Size
EBR
5.4”
DIJY
DFRY
/PUBDUVBMMFOHUI
w4UFFM4QBDFS
wYw#PMU
AKHY
8IJUF4JMJDPOF(SFBTF
JNBHFJTOPUUPTDBMF
EBPY
wYw4USBJHIU1JO
PARTS REQUIRED
Parts shown at 10% of Actual Size
DIUY
1PXFS'MFY4QSJOH"TTFNCMZ
AKFY
AKGY
(BT4QSJOH
(BT4QSJOH$PWFS
Parts shown at 25% of Actual Size
AKI (x1)
Handle Assembly
DIOY
CYAY
)BOEMF#SBDLFU
5VCF$BQ
TOOLS REQUIRED
1/2”, 3/4”, 15/16”
WrenchYFBDI
1/4”, 3/8” Allen
WrenchYFBDI
44
Rubber Mallet
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
1/2”Y
DIHY
1/4”Y
SEC
CYNY
4MJEFUIFGas Spring Cover (AKG)POUPUIFGas Spring (AKF)
5.1
AKF
AKG
SEC
5.2
"MJHOUIFIPMFTJOUIFGas Spring Cover (AKG)BOEUIFGas Spring (AKF)XJUIUIF
IPMFTJOUIFPole Bracket (ALL)BOEBUUBDIUIF(BT4QSJOHBTTFNCMZUPUIF
1PMF#SBDLFUXJUIUIFIBSEXBSFTIPXO
CYN
ALL
DIH
AKG
AKF
!
Note: Tighten the 5/16” Nylock Nut (CYN) until it is flush with the end of the Bolt.
45
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
5.4”
3/4”Y
3/8”Y
DFRY
AAXY
SEC
AEGY
AJZY
ANZY
"QQMZDark Lithium Grease (AJZ)UPUIF1/2” x 5.4” Bolt (DFR)"UUBDIUIFHandle
Brackets (CYA)UPUIF1PMF
5.3
Apply Dark Lithium
Grease (AJZ)
ANZ
AEG
AEG
AAX
ANZ
DFR
CYA
CYA
!
Note: DO NOT overtighten the hardware. The Handle Brackets should rotate freely.
46
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
EBOY
AJZY
EBPY
AEGY
/PUUPTDBMF
SEC
5.4
"QQMZDark Lithium Grease (AJZ)UPUIF1/2” x 3” Straight Pin (EBP)"UUBDIUIF
Handle (AKI)UPUIFHandle Brackets (CYA).BLFTVSFUIFSFJTB1/2” Plastic
Washer (AEG)POFBDITJEFCFUXFFOUIF)BOEMFBOEUIF#SBDLFUT6TF
QMJFSTUPQSFTTUIF E-Clip (EBO)JOUPQMBDFPOUIF1JO
AEG
AEG
EBO
EBP
AKI
Apply Dark Lithium
Grease (AJZ)
47
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
NO TOOLS REQUIRED FOR THIS PAGE
DINY
AKHY
SEC
5.5
"QQMZWhite Silicone Grease (AKH)UPUIFTrigger Pin (DIN)BOEQPTJUJPOJU
MPPTFMZJOTJEFUIFGas Spring (AKF)BTTIPXO
AKF
DIN
Apply White Silicone
Grease (AKH)
WARNING
While installing the Handle, use caution to avoid
engaging the Gas Spring until assembly of the
basketball system is complete. Doing so could cause
serious injury or property damage.
CAUTION
Use only Silicone Grease during this step.
Lithium Grease may damage Gas Springs.
48
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
EBOY
AKHY
DIQY
/PUUPTDBMF
EBPY
SEC
"QQMZWhite Silicone Grease (AKH)UPUIF1/2” x 3” Straight Pin (EBP).BLF
TVSFUPQMBDFUIF1/2” Large Plastic Washers (DIQ)CFUXFFOUIF)BOEMF
"TTFNCMZBOEUIF)BOEMF#SBDLFUT&BDI4QBDFSTIPVMEBMTPCF
nVTIBHBJOTUPOFFOEPGUIF5SJHHFS1JO
5.6
DIQ
DIQ
EBO
EBP
CAUTION
Apply White Silicone
Grease (AKH)
SEC
"UUBDIUIFTube Cap (DIO)UPUIFPower Flex Spring Assembly (DIU)BTTIPXO
*GOFFEFEVTFBSVCCFSNBMMFUUPUBQUIF5VCF$BQJOUPQMBDF
5.7
DIO
!
Use only Silicone Grease during this step.
Lithium Grease may damage Gas Springs.
DIU
Note: If Cap is already installed, move on to the next step.
49
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
AKHY
EBOY
ANZY
AEGY
/PUUPTDBMF
DIQY
/PUUPTDBMF
EBPY
SEC
5.8
"QQMZWhite Silicone Grease (AKH)UPUIF1/2” x 3” Straight Pin (EBP)5ISFBE
UIF1JOUISPVHIUIF)BOEMF#SBDLFUWasher (AEG))BOEMFLarge
Plastic Spacer (DIQ)1/2” x 1/5” Spacer (ANZ)BOEUIFOBSSPXFOEPGUIF
Power Flex Spring Assembly (DIU)UIFOPVUUISPVHIUIFPUIFSTJEFJOUIF
PQQPTJUFPSEFS4FDVSFXJUIUIF1/2” E-Clip (EBO)
DIU
DIU
DIQ
ANZ
ANZ
DIQ
EBO
EBP
AEG
Apply White Silicone
Grease (AKH)
CAUTION
Use only Silicone Grease during this step.
Lithium Grease may damage Gas Springs.
50
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
7”
15/16”Y
AJZY
3/8”Y
DXLY
/PUBDUVBMMFOHUI
CYGY
AEHY
SEC
5.9
DIJY
"QQMZDark Lithium Grease (AJZ)UPUIF5/8” x 7” Bolt (DXL)$POOFDUUIF
PowerFlex Spring Assembly (DIU)UPUIFLower Extension Arms (AKB)XJUIUIF
IBSEXBSFTIPXO.BLFTVSFBMMIBSEXBSFGSPNUIJTTFDUJPOJTQSPQFSMZ
UJHIUFOFE
DIJ
CYG
AEH
Apply Dark Lithium
Grease (AJZ)
AEH
DXL
WARNING
The Handle mechanism is designed to lift
only the weight of the Backboard and Rim.
Do not hang anything from the Handle, Rim,
Backboard, or Lifter Arms as this will damage
the system and void the warranty.
DIU
!
Note: Tighten the 5/8” Nylock Nut (CYG) until it is flush with the end of the Bolt.
!
Note: Use a 1/2” Wrench and a 1/2” x 3/4” Hex Bolt (not provided) threaded onto two 1/2”
Hex Nuts (not provided) to act as an Allen Wrench if a 1/2” Allen Wrench is not available.
51
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
NO TOOLS REQUIRED FOR THIS PAGE
AKHY
SEC
5.10
(FOFSPVTMZBQQMZWhite Silicone Grease (AKH)POUPUIF3FMFBTF1JOPG
UIF(BT4QSJOH
Apply White Silicone
Grease (AKH)
AKH
CAUTION
Use only Silicone Grease during this step.
Lithium Grease may damage Gas Springs.
52
SEC
6
FINAL ASSEMBLY
HARDWARE REQUIRED
Hardware shown at Actual Size
BCO
*Hardware for this Section taken from Section 1
CMV Y
Yw4FMG%SJMMJOH4DSFX
PARTS REQUIRED
Parts shown at 10% of Actual Size
AKZY
/FU
Parts shown at 25% of Actual Size
AKPY
)FJHIU4UJDLFS
TOOLS REQUIRED
Ladder (x3)
Rubber Mallet
Electric Drill
53
Wood Block
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
(x3)
NO HARDWARE REQUIRED FOR THIS PAGE
SEC
AT LEAST THREE ADULTS ARE REQUIRED. DO NOT ATTEMPT ASSEMBLY WITH FEWER
THAN THREE ADULTS AND THREE LADDERS.
6.1
BEFORE CONTINUING: *UJTDSJUJDBMUIBUUIFJOTUSVDUJPOTJOUIFGPMMPXJOHTUFQT
BSFGPMMPXFEFYBDUMZ'BJMVSFUPQSPQFSMZPSJFOUBOEBMJHOUIFQPMFTFDUJPOT
XJMMSFOEFSUIFQPMFVOVTBCMF*GUIFQPMFTFDUJPOTBSFBTTFNCMFEJODPSSFDUMZ
ZPVXJMMIBWFUPQVSDIBTFOFXQPMFTFDUJPOTGSPNPVS$VTUPNFS4FSWJDF
%FQBSUNFOU*GZPVIBWFRVFTUJPOTSFHBSEJOHUIFQPMFBTTFNCMZQMFBTFDBMM
PVS$VTUPNFS4FSWJDF%FQBSUNFOUGPSBTTJTUBODF
.BLFBNBSLJODIFTGSPNUIFUPQPGUIFBottom Pole (ALE)8JUIUIF#BDLCPBSEGBDJOH
UIFQMBZJOHTVSGBDFDBSFGVMMZTMJEFUIF5PQ.JEEMF1PMFBTTFNCMZPWFSUIF#PUUPN1PMF
5PNBLFUIJTTUFQFBTJFSBEKVTUUIFTZTUFNUPUIFMPXFTUTFUUJOHCFGPSFQSPDFFEJOH
ALH
ALF
5” mark
WARNING
ALE
Playing
Surface
6TFFYUSFNFDBVUJPOXIFOTUBOEJOHPOMBEEFSTUP
QFSGPSN BTTFNCMZ TUFQT 'PMMPX BMM XBSOJOHT BOE
DBVUJPOTPOUIFMBEEFS'BJMVSFUPGPMMPXBMMPGUIFTF
JOTUSVDUJPOT BOE XBSOJOHT DPVME MFBE UP TFSJPVT
QFSTPOBMJOKVSZPSQSPQFSUZEBNBHF
54
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
NO HARDWARE REQUIRED FOR THIS PAGE
(x1)
SEC
6.2
8IJMFUXPQFPQMFDPOUJOVFUPIPMEUIFBTTFNCMZJOQMBDFTFUUIF4DSBQ
8PPEPOUPQPGUIF3JHJE"SNTBOETUSJLFJUUJNFTXJUIBIBNNFSPS
NBMMFUYou must have wood on top of the Arms before hitting them with a hammer to
prevent scratching the powder coating. 5IFCPUUPNFEHFPGUIF.JEEMF1PMFNVTU
SFBDIXJUIJOJODIPGUIFJODINBSLPOUIF#PUUPN1PMF
Wood Block
WARNING
The Poles must be seated together! Poles must
be struck on a hard surface five to six times!
Failure to seat the Poles correctly could allow the
Poles to separate during use, which could lead
to serious personal injuries or property damage.
!
Note: If your Pole sections do not reach within 1/2” of the 5” mark after seating,
DO NOT COMPLETE ASSEMBLY. Call our Customer Service number for assistance.
55
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
CMV (x1)
SEC
6.3
5PDPNQMFUFMZTFBUUIF1PMFTUPHFUIFSJOTFSUUIFSFNBJOJOH#10 x .62”
Self-Drilling Screw (CMV)JOUPUIFQJMPUIPMFPOUIFCBDLPGUIFMiddle Pole
(ALF)BOEJOUPUIFNFUBMPGUIFBottom Pole (ALE)
ALF
ALF
CMV
ALE
CMV
ALE
!
Note: Chuck the Self-Tapping Screw directly into an Electric
Drill for easy installation, or use a 3/8” Hex Driver.
56
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
NO HARDWARE REQUIRED FOR THIS PAGE
SEC
6.4
3FNPWFUIFQSPUFDUJWFmMNGSPNUIF#BDLCPBSEBOEBUUBDIUIFNet
(AKZ) UPUIFRim (ALX)BTTIPXO
ALX
AKZ
!
SEC
6.5
Note: If a replacement Net is needed, please call our Customer Service Department.
Our Nets are shorter than average to reduce the risk of entanglement.
3BJTFUIF#BDLCPBSEVOUJMUIFUPQPGUIF3JNJTGFFUw
BCPWFUIFQMBZJOH
TVSGBDF6TFBQFODJMUPNBSLXIFSFUIFCPUUPNPGUIFGas Spring Cover (AKG)
NFFUTUIFGas Spring (AJR)3FNPWFBCPVUBOJODIPGCBDLJOHGSPNUIFUPQPG
UIFHeight Sticker (AKP)4RVFF[FUIF(BT4QSJOH$PWFSUPBMMPXSPPNBOEBQQMZ
UIF4UJDLFSUPUIFCBDLPGUIF(BT4QSJOHMJOJOHVQUIFMJOFXJUIUIFQFODJM
NBSL1SFTTUIF4UJDLFSJOUPQMBDFXIJMFTMPXMZSFNPWJOHUIFSFTUPGUIFCBDLJOH
AKG
Squeeze
here
Squeeze
here
AJR
!
Note: Height Sticker (AKP) may be different than the one shown here.
57
AKP
OPERATION OF HEIGHT ADJUSTMENT SYSTEM
5IFCBTLFUCBMMTZTUFNNBZCFBEKVTUFEGSPNGFFUUPGFFU
To Adjust the Height of the Hoop:
)PMEUIF)BOEMFUJHIUMZUPFOHBHFUIF(BT4QSJOH3BJTFUIF)BOEMFUPMPXFSUIF
#BDLCPBSEPSMPXFSUIF)BOEMFUPSBJTFUIF#BDLCPBSE
POLE CARE AND SYSTEM MAINTENANCE
5IFMJGFPGZPVSCBTLFUCBMMTZTUFNEFQFOETPONBOZWBSJBCMFT5IFDMJNBUFFYQPTVSF
UPDPSSPTJWFTTVDIBTTBMUQFTUJDJEFTPSIFSCJDJEFTBOEFYDFTTJWFVTFPSNJTVTFDBO
BMMDPOUSJCVUFUP1PMFGBJMVSFXIJDINBZDBVTFQSPQFSUZEBNBHFPSQFSTPOBMJOKVSZ
$IFDLZPVSCBTLFUCBMMTZTUFNGSFRVFOUMZGPSMPPTFIBSEXBSFFYDFTTJWFXFBSBOE
TJHOTPGDPSSPTJPO'PSTBGFUZSFBTPOTBOEUPQSPMPOHUIFMJGFPGZPVSCBTLFUCBMM
TZTUFNZPVNVTUUBLFUIFGPMMPXJOHQSFWFOUJWFNFBTVSFT
B $IFDLBMM/VUTBOE#PMUT*GBOZBSFMPPTFUJHIUFOUIFN
C $IFDLBMMQBSUTGPSFYDFTTJWFXFBSBOEUFBS*GOFDFTTBSZSFQMBDFBOZQBSUTUIBU
IBWFCFFOXPSOPSEBNBHFEUISPVHIVTBHF$IFDLUIF1PMF$BQGPSDSBDLTPS
UFBSTUIBUDPVMEMFUXBUFSJOUIF1PMF$POUBDUPVS$VTUPNFS4FSWJDF%FQBSUNFOU
GPSSFQMBDFNFOUQBSUT
D *OTQFDUUIF8BSOJOH4UJDLFSPOUIF1PMF*GJUJTSJQQFEGBEFEPSJMMFHJCMF
DBMMPVS$VTUPNFS4FSWJDF%FQBSUNFOUUPSFRVFTUBSFQMBDFNFOU4UJDLFS
E $IFDLBMM1PMFTFDUJPOTGPSWJTJCMFSVTUPSDIJQQFEPSDSBDLFEQBJOU*GFJUIFS
BSFQSFTFOUEPUIFGPMMPXJOH
6TFBOFNFSZDMPUIUPDPNQMFUFMZSFNPWFBOZSVTUPSDIJQQFEQBJOU
$MFBOUIFBSFBXJUIBEBNQDMPUIBOEBMMPXJUUPESZ
"QQMZUXPDPBUTPGBSVTUQSFWFOUBUJWFIJHIHMPTTFOBNFMQBJOUUPUIF
BSFB"MMPXUIFQBJOUUPESZCFUXFFODPBUT
IF RUST HAS PENETRATED THROUGH THE POLE ANYWHERE, REPLACE IT IMMEDIATELY!
58
NOTES
59
NOTES
60
NOTES
61
WARNING
FAILURE TO FOLLOW THESE WARNINGS MAY
RESULT IN SERIOUS INJURY AND/OR PROPERTY
DAMAGE.
Owners must ensure that all players know and follow
these rules for safe operation of the system.
yOnly hang from the rim EULHÀ\ to regain balance or avoid
injuring others. Release the rim as soon as safely possible.
yDuring play, especially when performing dunk type activities,
keep player’s face away from the backboard, rim, and net.
Serious injury could occur if teeth/face come in contact with
the backboard, rim, or net. Player should wear a mouth
guard during play.
yDo not slide, climb, or play on pole.
yWhen adjusting height or moving system, keep hands and
¿QJHUVDZD\IURPPRYLQJSDUWV
yDo not allow children to move or adjust system.
yDo not wear jewelry (rings, watches, necklaces, etc.) during
play. Objects may entangle in net.
ADVERTENCIA
yKeep organic material away from pole base. Grass, litter,
etc. could cause corrosion and/or deterioration.
yOnce a month check pole and all metal parts for signs of
corrosion (rust, pitting, chipping). Completely remove rust
and repaint with exterior enamel. If rust has penetrated any
steel part, replace that part immediately.
y Check system before each use for loose hardware,
excessive wear, instability, and signs of corrosion and repair
before use.
y1HYHUSOD\RQGDPDJHGHTXLSPHQW
y Do not use the system to lift or hoist anything. The
mechanism is designed to lift only the weight of the
backboard and rim. Do not hang anything from the handle,
rim backboard, or lifter arms as this will damage the system
and void the warranty.
AVERTISSEMENT
SI NO SE OBEDECEN ESTAS ADVERTENCIAS
PUEDEN PRODUCIRSE GRAVES LESIONES Y/O
DAÑOS A LA PROPIEDAD.
FAUTE DE NE PAS SUIVRE CES AVERTISSEMENTS,
VOUS RISQUEZ DE CAUSER DES BLESSURES
GRAVES ET/OU DES DOMMAGES À L’ÉQUIPEMENT.
El propietario del sistema debe asegurarse de que
todos los jugadores conozcan y respeten estas reglas
para que el sistema se use en forma segura.
Le propriétaire doit s’assurer que tous les joueurs
FRQQDLVVHQWHWDSSOLTXHQWOHVUqJOHVVXLYDQWHVD¿Q
d’utiliser l’équipement en toute sécurité.
‡ Cuélguese del aro sólo en forma breve, para recuperar el
equilibrio o evitar lesionar a otros jugadores. Suéltese del
aro lo más pronto que pueda hacerlo con seguridad.
‡ Durante el juego, especialmente al embocar violentamente
de alto, la cara de los jugadores debe mantenerse alejada
del tablero, el aro y la red. Pueden producirse lesiones
graves si los dientes o la cara entran en contacto con
el tablero, el aro o la red. Los jugadores deben usar un
protector bucal durante el juego.
‡1RVHGHVOLFHQRWUHSHQLMXHJXHVREUHHOSRVWH
‡ Mantenga las manos y los dedos alejados de las piezas
movibles cuando regule la altura del sistema.
‡1RGHMHTXHORVQLxRVUHJXOHQHOVLVWHPD
‡ 1R use joyas (anillos, relojes, collares o gargantillas, etc.)
durante el juego. Estos objetos pueden engancharse en la
red.
‡ 1R permita que la base del poste entre en contacto con
materiales orgánicos. El pasto, los desechos animales, etc.,
pueden causar corrosión y/o deterioros.
‡ Controle el poste y todas las piezas metálicas una vez al
mes en busca de signos visibles de corrosión (oxidación,
picaduras, escamado). Elimine todo rastro de óxido y
vuelva a pintar con esmalte para exteriores. Si el óxido ha
penetrado cualquier pieza de acero, reemplace esa pieza
de inmediato.
‡ Inspeccione el sistema antes de cada uso para YHUL¿FDU
que los elementos de ¿MDFLyQ no estén ÀRMRV que no haya
desgaste excesivo, inestabilidad ni signos de corrosión.
Si encuentra irregularidades, repárelas antes de usar el
sistema.
‡1XQFDMXHJXHFRQXQHTXLSRGDxDGR
‡ 1R use el sistema para levantar ningún objeto. El
mecanismo está GLVHxDGR para elevar solamente el peso
del tablero con el aro. 1R cuelgue nada de la agarradera, el
aro, el tablero ni los brazos de elevación, ya que esto puede
GDxDUHOVLVWHPD\DQXODUODJDUDQWtD
‡1H vous suspendez pas à l’anneau plus que nécessaire
pour retrouver votre équilibre ou éviter de blesser les autres
joueurs. Relâchez l’anneau aussitôt que possible.
‡ Lors d’un match, particulièrement dans le cas des smashs,
le visage du joueur ne doit pas faire face au panneau, à
l’anneau, ni au ¿OHW Le joueur risque de graves blessures si
ses dents ou son visage entrent en contact avec le panneau,
l’anneau, ou le ¿OHW Les joueurs doivent toujours porter un
protège-dents lorsqu’ils jouent.
‡ 1H glissez pas, ne grimpez pas, et ne jouez pas sur la base
ou le poteau.
‡ Lorsque vous ajustez la hauteur ou l’équipement, gardez
vos mains et doigts loin des pièces mobiles.
‡1¶DXWRULVH]SDVOHVHQIDQWVjDMXVWHUO¶pTXLSHPHQW
‡ 1H portez pas de bijoux (bagues, montres, colliers, etc.)
lorsque vous jouez. Ces objets pourraient s’accrocher au
¿OHW
‡ Gardez la base du poteau libre de toute matière organique.
L’herbe, les déchets, etc. peuvent la corroder et la
détériorer.
‡ Une fois par mois, YpUL¿H] que le poteau et toutes les pièces
en métal ne montrent pas de signes de corrosion (rouille,
piqûres, écaillage). Enlevez toute la rouille et repeignez
complètement avec une peinture pour extérieur. Si la rouille
a pénétré une des pièces en acier, vous devrez remplacer
immédiatement la pièce en question.
‡ A chaque fois que vous allez utiliser l’équipement, YpUL¿H]
d’abord l’équilibre, la possibilité de pièces desserrées ou
usées, la stabilité de l’équipement et tout signe de corrosion
ou réparation nécessaire avant utilisation.
‡1HMRXH]MDPDLVDYHFXQpTXLSHPHQWHQGRPPDJp
‡ 1¶XWLOLVH] pas l’équipement pour lever ou soulever quoique
ce soit. Son mécanisme a été conçu uniquement pour
soutenir le poids du panneau et de l’anneau. 1¶DFFURFKH]
rien au manche, à l’anneau, au panneau ni aux leviers sous
peine d’endommager l’équipement et d’annuler la garantie.
#FS16500
www.lifetime.com
10/12/2004
62
ENHANCE YOUR LIFETIME® PURCHASE BY ADDING
ACCESSORIES OR OTHER GREAT PRODUCTS:
To purchase accessories or other Lifetime Products, visit us at:
www.lifetime.com
Or call: 1-800-424-3865
63
WARRANTY INFORMATION
LIFETIME BASKETBALL EQUIPMENT
6-YEAR LIMITED FACTORY WARRANTY
THE MANUFACTURER RESERVES THE RIGHT TO MAKE SUBSTITUTIONS TO WARRANTY CLAIMS IF PARTS ARE
UNAVAILABLE OR OBSOLETE.
-JGFUJNFCBTLFUCBMMTZTUFNTBSFXBSSBOUFEUPUIFPSJHJOBMQVSDIBTFSUPCFGSFFGSPNEFGFDUTJONBUFSJBM
PSXPSLNBOTIJQGPSBQFSJPEPGTJYZFBSTGSPNUIFEBUFPGPSJHJOBMSFUBJMQVSDIBTF5IFXPSEiEFGFDUTw
JTEFmOFEBTJNQFSGFDUJPOTUIBUJNQBJSUIFVTFPGUIFQSPEVDU%FGFDUTSFTVMUJOHGSPNNJTVTFBCVTF
PSOFHMJHFODFXJMMWPJEUIJTXBSSBOUZ5IJTXBSSBOUZEPFTOPUDPWFSEFGFDUTEVFUPJNQSPQFSJOTUBMMBUJPO
BMUFSBUJPOPSBDDJEFOU5IJTXBSSBOUZEPFTOPUDPWFSEBNBHFDBVTFECZWBOEBMJTNSVTUJOHiBDUTPG
OBUVSFwPSBOZPUIFSFWFOUCFZPOEUIFDPOUSPMPGUIFNBOVGBDUVSFS
5IJTXBSSBOUZEPFTOPUDPWFSCSFBLBHFPGUIFUFNQFSFEHMBTTQMBZJOHTVSGBDF
5IJTXBSSBOUZJTOPOUSBOTGFSBCMFBOEJTFYQSFTTMZMJNJUFEUPUIFSFQBJSPSSFQMBDFNFOUPGEFGFDUJWF
CBTLFUCBMMFRVJQNFOU*GUIFFRVJQNFOUJTEFGFDUJWFXJUIJOUIFUFSNTPGUIJTXBSSBOUZ-JGFUJNF1SPEVDUT
*ODXJMMSFQBJSPSSFQMBDFEFGFDUJWFQBSUTBUOPDPTUUPUIFQVSDIBTFS4IJQQJOHDIBSHFTUPBOEGSPN
UIFGBDUPSZBSFOPUDPWFSFEBOEBSFUIFSFTQPOTJCJMJUZPGUIFQVSDIBTFS-BCPSDIBSHFTBOESFMBUFE
FYQFOTFTGPSSFNPWBMJOTUBMMBUJPOPSSFQMBDFNFOUPGUIFCBTLFUCBMMTZTUFNPSJUTDPNQPOFOUTBSFOPU
DPWFSFEVOEFSUIJTXBSSBOUZ
5IJTXBSSBOUZEPFTOPUDPWFSTDSBUDIJOHPSTDVGmOHPGUIFQSPEVDUUIBUNBZSFTVMUGSPNOPSNBM
VTBHF *O BEEJUJPO EFGFDUT SFTVMUJOH GSPN JOUFOUJPOBM EBNBHF OFHMJHFODF VOSFBTPOBCMF VTF PS
IBOHJOHGSPNUIFOFUPSSJNXJMMWPJEUIJTXBSSBOUZ
-JBCJMJUZGPSJODJEFOUBMPSDPOTFRVFOUJBMEBNBHFTJTFYDMVEFEUPUIFFYUFOUQFSNJUUFECZMBX8IJMF
FWFSZBUUFNQUJTNBEFUPFNCPEZUIFIJHIFTUEFHSFFPGTBGFUZJOBMMFRVJQNFOUGSFFEPNGSPNJOKVSZ
DBOOPUCFHVBSBOUFFE5IFVTFSBTTVNFTBMMSJTLPGJOKVSZSFTVMUJOHGSPNUIFVTFPGUIJTQSPEVDU"MM
NFSDIBOEJTFJTTPMEPOUIJTDPOEJUJPOBOEOPSFQSFTFOUBUJWFPGUIFDPNQBOZNBZXBJWFPSDIBOHF
UIJTQPMJDZ
5IJTQSPEVDUJTOPUJOUFOEFEGPSJOTUJUVUJPOBMPSDPNNFSDJBMVTF-JGFUJNF1SPEVDUT*ODEPFTOPUBTTVNF
BOZMJBCJMJUZGPSTVDIVTF*OTUJUVUJPOBMPSDPNNFSDJBMVTFXJMMWPJEUIFXBSSBOUZ
5IJTXBSSBOUZJTFYQSFTTMZJOMJFVPGBMMPUIFSXBSSBOUJFTFYQSFTTFEPSJNQMJFEJODMVEJOHXBSSBOUJFT
PGNFSDIBOUBCJMJUZPSmUOFTTGPSVTFUPUIFFYUFOUQFSNJUUFECZ'FEFSBMBOETUBUFMBX/FJUIFS-JGFUJNF
1SPEVDUT*ODOPSBOZSFQSFTFOUBUJWFBTTVNFTBOZPUIFSMJBCJMJUZJODPOOFDUJPOXJUIUIJTQSPEVDU
5IJTXBSSBOUZHJWFTZPVTQFDJmDMFHBMSJHIUTBOEZPVNBZBMTPIBWFPUIFSSJHIUTXIJDIWBSZGSPN
TUBUFUPTUBUF
ALL WARRANTY CLAIMS MUST BE ACCOMPANIED BY A SALES RECEIPT.
REPORT PRODUCT DEFECTS IN WRITING TO:
-JGFUJNF1SPEVDUT*OD10#PY$MFBSmFME65PSDBMM
.'BNUPQN.45
$BMMPSWJTJUPVS8FCTJUFGPS4BUVSEBZIPVST
1MFBTFJODMVEFZPVSEBUFETBMFTSFDFJQUBOEQIPUPHSBQITPGEBNBHFEQBSUT
To register the product, visit our Web site at www.lifetime.com
www.lifetime.com
64