QUICK ROOF
QR-35
3'' x 33.5'
TM
INSTANT
WATERPROOF
REPAIR and
RE-ROOFING
• Self-Stick Aluminum Surface •
• Super Reinforced •
• Just Press in Place for a Permanent Repair •
• Five Puncture Resistant Layers •
• 10 Year Material Warranty •
USE QUICK ROOF™ FOR
HUNDREDS OF REPAIR PROJECTS:
•
•
•
•
•
•
QR-36 - 3' x 33.5' also available for
Re-Roofing
Metal & Flat Roofs
RV & Mobile Homes
Trucks & Trailers
Gutters & Flashings
Skylights
Anywhere Leaks are a Problem
COFAIR
PRODUCTS, INC.
7301 N. St. Louis Avenue, Skokie, IL 60076
PHONE: 800-333-6700 • www.cofair.com
QR-316
3"x 16"
QR-616
6" x 16"
QR-6
6"x 33"
QR-18
18"x 33"
Original QUICK ROOF™ Self-Stick Aluminum Roll Roofing
A Fast Application,
Multi-Purpose Roofing and
Waterproofing Sheet from
• Waterproof/Weatherproof
• Sticks to most surfaces
• Aluminum surface reflects heat – reduces
energy costs
• Low cost/Labor saving/Easy to install
• Light in weight/Easy to handle
• Tough and durable – puncture and abrasion
resistant
• Stretches to allow for building movement
• Requires no coating for exposure to sunlight
• For roofing, waterproofing, patching and
repair, hundreds of other uses
Why QUICK ROOF is the fastest,
easiest and most economical solution
to your waterproofing problems.
What is QUICK ROOF?
CPI starts with a reflective aluminum foil.
Under the foil are rugged, waterproof polymer
films. Laminated beneath the films is a thick
layer of rubberized asphalt. The asphalt
compound adheres to most surfaces and seals
around most punctures, forming a protective
waterproof barrier. Finally, a high-quality
release paper is applied to shield the adhesive
surface until the QUICK ROOF is installed.
Why an aluminum foil?
The high density aluminum foil used in the
manufacture of QUICK ROOF reflects sunlight
and reduces rooftop temperatures by an
estimated 22.5%. This membrane may be
exposed to direct sunlight without the use of a
coating, which saves time, labor and money.
Where should I use QUICK ROOF?
Use this product anywhere you want a fast,
dependable waterproofing barrier. Applying
waterproofing materials is generally a messy,
complicated process requiring much labor,
equipment, and skill. QUICK ROOF simplifies
the operation – you just peel off the release
paper and apply the waterproofing sheet to
any prepared surface. QUICK ROOF may be
used for roofing, waterproofing, patching and
repair or any job requiring tough, weatherproof
protection.
How is it installed?
Simple...align sheet and apply to clean dry
surface by removing the release paper as the
material is carefully unrolled and pressed into
place. QUICK ROOF bonds to itself at
overlaps. No heat, glues, tapes, fasteners or
special tools are required ... you need only a
pair of scissors or utility knife. Some surfaces
will require cleaning and/or priming.
Can QUICK ROOF be used
for repair work?
It’s an excellent choice for patching smooth
asphalt roofs. The old roof should be cleaned
and primed as necessary, any blisters or
irregularities repaired to present a smooth
surface. QUICK ROOF is then applied to
leaking areas. A minimum 12” of solid contact
should be allowed between the edge of
QUICK ROOF and any known leaks. A bead
of caulk will help to protect exposed edges.
Narrow rolls are available for repairs and
flashing.
Product Description
QUICK ROOF is a self-adhering waterproofing
material with a reflective aluminum surface.
The sheet features multiple laminations of
special aluminum foil, high density polymer
films and a thick layer of rubberized asphalt
waterproofing compound. The aluminum foil
reflects the sun to lower rooftop temperature
and reduce energy costs. The films stabilize
and reinforce the sheet and act as the first line
of defense against leaks. The rubberized
asphalt seals tightly at the overlaps and
around most punctures, and forms a longlasting waterproof barrier. QUICK ROOF
requires no coating.
Special Features
The CPI production facility is specially
designed to make a superior waterproofing
membrane. QUICK ROOF offers the
contractor and property owner these extra
features:
• Eliminates Leaks – multiple layers of
protection seal out water. Rubberized
asphalt won’t crack or dry.
• Sticks to Most Surfaces – QUICK ROOF
sticks to roof decks for ease of application
and to eliminate movement of water under
the membrane.
• No Coating Necessary – with QUICK ROOF
you simply peel off the release paper, apply
to any prepared surface ...and the job is
done!
• Easy & Fast to Install – QUICK ROOF
eliminates the need for big crews, hot
kettles, torches, adhesives, fasteners, etc.
Following the simple instructions anyone can
install QUICK ROOF using only scissors.
Surface Preparation
QUICK ROOF may be applied directly to roof
decks including wood, metal, masonry and
existing smooth asphalt roofs. Because of the
unpredictable condition of existing roofs, CPI
cannot guarantee the performance of QUICK
ROOF over mineral surfaces. The surface to
receive QUICK ROOF must be clean, dry and
free from oil, grease or debris – prime where
necessary.
Installation
QUICK ROOF is easily installed by removing
the release paper and pressing the aluminized
membrane into place. QUICK ROOF can be
cut to fit using scissors or razor knife. QUICK
ROOF adheres to the deck and to itself when
overlapped. When overlapping the product, 3”
side laps and 6” end laps are required.
Align sheet. Peel off first 2’ of release paper
and adhere sheet to the substrate being
careful to maintain proper alignment. Carefully
unroll, peeling the release paper and pressing
into place as you go. Refer to NRCA
ROOFING & WATERPROOFING MANUAL for
complete flashing details.
Small wrinkles are not desirable but can be
smoothed out and will not affect the roof’s
performance. Large ones should be avoided
and repaired by cutting and patching before
the next roll is applied.
Typical Properties
Roll Size* 3" x 16'; 6" x 16'; 6" x 33.5';
18" x 33.5'; 36" x 33.5'
Thickness
45 mil
WARNING: QUICK ROOF is slippery. Use
caution when walking or standing on the
product. QUICK ROOF is reflective and can
contribute to sunburn. Protect skin and eyes.
SEE COMPLETE INSTRUCTIONS IN BOX
BEFORE APPLICATION
General
QUICK ROOF is a multi-purpose waterproofing
material. Apply QUICK ROOF in fair weather
at temperatures above 60° F. A minimum
slope of 1/2” per foot is required. Not
designed for ponding areas. NO TOP
COATING IS REQUIRED. Storage: Keep
rolls dry, protect from sunlight.
COFAIR
PRODUCTS, INC.
7301 N. St. Louis Avenue, Skokie, IL 60076
PHONE: 800-333-6700 • www.cofair.com
Printed 2-05