18.43 in
Special Notes:
4.00 in
22.21 in
15.20 in
15.20 in
Design:
I.D.: 1.50 inches
O.A.L.: 18.43 inches
Live Length: 15.20 inches
Height: 22.21 inches
Hose: 321 Stainless Steel
Braid: 304 Stainless Steel
End Configuration: Grooved Ends
Elbows: Carbon Steel
Pressure (Oper. PSI): 531 @ 70F
Pressure (Test PSI): 796 @ 70F
Max. Temperature: 800 Degrees F
Movement: +/- 2 inch
Note 1: For pressures at temp. above 70F, contact
Global Flex Mfg.
Note 2: At least one pipe alignment guide should
be positioned within four pipe diameters on each
side of the loop.
Approval:
Date:
This document is the property of
Global-Flex Mfg, and can not be
distributed without Global-Flex
Mfg. authorization
Changes:
Name
Date
Original 09/01/10
Revised 03/12/14
Customer:
AEW
By:
Drawing Number:
Part Number:
SCU150CSGV-2.0MVT
Special Notes:
18.43 in
4.00 in
26.01 in 19.00 in
19.00 in
Design:
I.D.: 1.50 inches
O.A.L.: 18.43 inches
Live Length: 19.00 inches
Height: 26.01 inches
Hose: 321 Stainless Steel
Braid: 304 Stainless Steel
End Configuration: Grooved Ends
Elbows: Carbon Steel
Pressure (Oper. PSI): 531 @ 70F
Pressure (Test PSI): 796 @ 70F
Max. Temperature: 800 Degrees F
Movement: +/- 3 inch
Note 1: For pressures at temp. above 70F, contact
Global Flex Mfg.
Note 2: At least one pipe alignment guide should
be positioned within four pipe diameters on each
side of the loop.
Approval:
Date:
This document is the property of
Global-Flex Mfg, and can not be
distributed without Global-Flex
Mfg. authorization
Changes:
Name
Date
Original 09/01/10
Revised 03/07/14
Customer:
AEW
By:
Drawing Number:
Part Number:
SCU150CSGV-3.0MVT
18.42 in
Special Notes:
4.00 in
29.31 in
22.30 in
Design:
I.D.: 1.50 inches
O.A.L.: 18.42 inches
Live Length: 22.30 inches
Height: 29.31 inches
Hose: 321 Stainless Steel
Braid: 304 Stainless Steel
End Configuration: Grooved Ends
Elbows: Carbon Steel
Pressure (Oper. PSI): 531 @ 70F
Pressure (Test PSI): 796 @ 70F
Max. Temperature: 800 Degrees F
Movement: +/- 4 inch
22.30 in
Note 1: For pressures at temp. above 70F, contact
Global Flex Mfg.
Note 2: At least one pipe alignment guide should
be positioned within four pipe diameters on each
side of the loop.
Approval:
Date:
This document is the property of
Global-Flex Mfg, and can not be
distributed without Global-Flex
Mfg. authorization
Changes:
Name
Date
Original 09/01/10
Revised 03/11/14
Customer:
A.R.G.
By:
Drawing Number:
Part Number:
SCU150CSGV-4.0MVT
Special Notes:
20.43 in
6.00 in
35.11 in
Design:
I.D.: 1.50 inches
O.A.L.: 20.43 inches
Live Length: 28.10 inches
Height: 35.11 inches
Hose: 321 Stainless Steel
Braid: 304 Stainless Steel
End Configuration: Grooved Ends
Elbows: Carbon Steel
Pressure (Oper. PSI): 531 @ 70F
Pressure (Test PSI): 796 @ 70F
Max. Temperature: 800 Degrees F
Movement: +/- 6 inch
28.10 in
Note 1: For pressures at temp. above 70F, contact
Global Flex Mfg.
Note 2: At least one pipe alignment guide should
be positioned within four pipe diameters on each
side of the loop.
Approval:
Date:
This document is the property of
Global-Flex Mfg, and can not be
distributed without Global-Flex
Mfg. authorization
Changes:
Name
Date
Original 09/01/10
Revised
2-04-14
Customer:
GAH
By:
Drawing Number:
Part Number:
SCU150CSGV-6.0MVT
21.44 in
Special Notes:
7.01 in
30.90 in
37.91 in
Design:
I.D.: 1.50 inches
O.A.L.: 21.44 inches
Live Length: 30.90 inches
Height: 37.91 inches
Hose: 321 Stainless Steel
Braid: 304 Stainless Steel
End Configuration: Grooved Ends
Elbows: Carbon Steel
Pressure (Oper. PSI): 531 @ 70F
Pressure (Test PSI): 796 @ 70F
Max. Temperature: 800 Degrees F
Movement: +/- 7 inch
Note 1: For pressures at temp. above 70F, contact
Global Flex Mfg.
Note 2: At least one pipe alignment guide should
be positioned within four pipe diameters on each
side of the loop.
Approval:
Date:
This document is the property of
Global-Flex Mfg, and can not be
distributed without Global-Flex
Mfg. authorization
Changes:
Name
Date
Original 09/01/10
Revised 03/12/14
Customer:
ARG
By:
Drawing Number:
Part Number:
SCU150CSGV-7.0MVT