UFACTURING • QUALITY • SERVICE • MANUFACTURING • QUALITY • SERVICE • MANUFACTURING • QUALITY • SERVICE • MANUFACT Worm Gear Clamps dixonvalve.com • Customer Service: 877.963.4966 Worm Gear Clamps Dixon Worm Gear Clamps •four-piece construction •clamp meets SAEJ1508 which supercedes Mil Spec WW-C-440B •screw design: 5/16" slotted hex head •maximum recommended torque 50 in. lbs. • all clamps sold 10 per box Style HS material: Style HSS material: •band and housing: SAE 201/301 series •band and housing: SAE 201/301 series stainless stainless •screw: SAE 1018 case-hardened steel, zinc •screw: SAE 300 series stainless plated and chromate dipped Band Width ½" style HS 9/16" style HSS Hose OD from to 50/64" 28/64" 58/64" 32/64" 1-4/64" 36/64" 1-16/64" 44/64" 1-32/64" 52/64" 1-48/64" 52/64" 2" 1-4/64" 2-16/64" 1-20/64" 2-32/64" 1-36/64" 2-48/64" 1-52/64" 3" 2-4/64" 3-16/64" 2-20/64" 3-32/64" 2-36/64" 3-48/64" 2-52/64" 4" 3-4/64" 4-16/64" 3-20/64" 4-32/64" 3-36/64" 5" 1-56/64" 5-32/64" 2-32/64" 6" 3-8/64" 6-32/64" 3-40/64" 7" 4-8/64" 8-32/64" 5-40/64" 10" 7-8/64" 12-16/64" 9-24/64" 13" 10-8/64" 13-48/64" 10-56/64" 14-32/64" 11-40/64" 15-16/64" 12-24/64" 16" 13-8/64" 20" 17-8/64" style HS Part # HS6 HS8 HS10 HS12 HS16 HS20 HS24 HS28 HS32 HS36 HS40 HS44 HS48 HS52 HS56 HS60 HS64 HS72 HS80 HS88 HS96 HS104 HS128 HS152 HS188 HS200 HS212 HS224 HS236 HS248 HS312 Case Qty 200 200 500 500 500 500 500 500 500 500 200 200 200 200 200 200 200 100 100 100 100 100 100 100 100 100 100 100 100 100 100 style HSS Part # HSS6 HSS8 HSS10 HSS12 HSS16 HSS20 HSS24 HSS28 HSS32 HSS36 HSS40 HSS44 HSS48 HSS52 HSS56 HSS60 HSS64 HSS72 HSS80 HSS88 HSS96 HSS104 HSS128 HSS152 HSS188 HSS200 HSS212 HSS224 HSS236 HSS248 HSS312 Case Qty 200 200 500 500 500 500 500 500 500 500 200 200 200 200 200 200 200 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Miniature Worm Gear Clamps • screw design: ¼" slotted hex head • maximum recommended torque 15 in. lbs. • all clamps sold 10 per box • meets SAE J1508 Style MH material: •band and housing: SAE 201/301 series stainless •screw: SAE 1018 case-hardened steel, zinc plated and chromate dipped style MH Band Width 5/16" style MAH 2 Hose OD from to 40/64" 14/64" 50/64" 28/64" 58/64" 32/64" 1-4/64" 36/64" 1-16/64" 44/64" 1-32/64" 60/64" 1-48/64" 1-12/64" style MH Part # MH4 MH6 MH8 MH10 MH12 MH16 MH20 Style MAH material: •band and housing: SAE 300 series stainless •screw: SAE 300 series stainless Case Qty 500 500 200 200 200 200 200 style MAH Part # MAH4 MAH6 MAH8 MAH10 MAH12 MAH16 MAH20 Case Qty 500 500 200 200 200 200 200 Torque ratings correspond to the torque rating of the screw of the clamp and are not an indication of the working pressure of any hose assembly installed with this clamp. 877.963.4966 ♦ dixonvalve.com Dixon Worm Gear Clamps Quick Release Clamps • maximum recommended torque 30 in. lbs. • screw design: 5/16" slotted hex head • Parts showing package quantities are sold in package quantities only. Style LSS material: • band and housing: 301 series stainless • screw: SAE 410 series stainless Style LS material: • band and housing: 301 series stainless • screw: plated hardened carbon steel Band Width ½" Hose OD from to 1-32/64" 3-32/64" 1" 4" 2" 5" 2-4/64" 6" 6-36/64" 3-32/64" 1-48/64" 7" 1-48/64" 8-36/64" 2" 10" 2-4/64" 12-20/64" 10-12/64" 14" 10-48/64" 16" style LS Part # LS48 LS56 LS72 LS88 LS96 LS104 LS128 LS152 LS188 ----- Pkg Qty 10 10 10 10 -10 ------ style LSS Part # LSS48 --LSS72 LSS88 --LSS104 LSS128 --LSS188 LSS216 LSS248 Pkg Qty 10 -10 10 -10 ------ style LS style LSS Torque ratings correspond to the torque rating of the screw of the clamp and are not an indication of the working pressure of any hose assembly installed with this clamp. Thumb Screw Clamps • worm gear style clamp, no tools required •screw cap removable to make clamp tamper resistant •plated carbon steel screw with a yellow thermoplastic screw cap, removable and reusable •band and housing are stainless steel Band Width 5/16" 5/16" ½" ½" ½" Dixon Hose OD from to ¼" 5/8" 5/16" 7/8" ½" 1-¼" ¾" 1-¾" 1-¼" 2-¼" Stainless Steel Part # MH4Y MH6Y HS12Y HS20Y HS28Y 877.963.4966 ♦ dixonvalve.com Pkg Qty 10 10 10 10 10 3 Worm Gear Clamps Aero-Seal® Clamps style 100 style 200 •four-piece construction •heat treated screws have buttress thread type •band slots designed for strength and •safety collar or thumb screw available smooth action •maximum recommended torque 50 in. lbs. •saddle interlocks into embossed band to • sold only in boxes of 10 form a true concentric circle •slotted hex head screw design Style 100 material: Style 200 material: Style 300 material: •band and housing: 300 •band and housing: 300 •band and housing: 302 series stainless series stainless series stainless • screw: plated carbon steel • screw: 410 series stainless •screw: high corrosion resistant 305 stainless Hose OD style 100 style 200 style 300 Pkg Qty Band Width Part # Part # Part # from to 10 30006 50/64" 20006 28/64" 10006 10 30008 58/64" 20008 32/64" 10008 10 30010 1-4/64" 20010 36/64" 10010 10 30012 1-16/64" 20012 44/64" 10012 10 30016 1-32/64" 20016 52/64" 10016 10 30020 1-48/64" 20020 52/64" 10020 10 30024 2" 20024 1-4/64" 10024 10 30028 2-16/64" 20028 9/16" 1-20/64" 10028 10 30032 2- 32/64" 20032 1-36/64" 10032 10 30036 2-48/64" 20036 1-52/64" 10036 10 30040 3" 20040 2-4/64" 10040 10 30044 3-16/64" 20044 2-20/64" 10044 10 30048 3-32/64" 20048 2-36/64" 10048 10 30052 3-48/64" 20052 2-52/64" 10052 10 30056 4" 20056 3-4/64" 10056 10 30060 4-16/64" 20060 3-20/64" 10060 style 300 Torque ratings correspond to the torque rating of the screw of the clamp and are not an indication of the working pressure of any hose assembly installed with this clamp. HTM Hi Torque Clamps style HTM •withstands more than three times the SAE torque requirements for worm-driven clamps •eight screw threads are engaged in the band simultaneously for incredible torquing drive (over 150 in. lbs.), sealing pressure and vibration resistance •slotted hex head screw design Material: • band and housing: 300 series half hard stainless • screw: 410 stainless steel screw Hose OD Stainless Steel Opt Qty Band Width Part # from to 2-8/64" 10 1-16/64" HTM200 2-40/64" 10 1-48/64" HTM250 3-8/64" 10 2-16/64" HTM300 3-40/64" 10 2-48/64" HTM350 4-8/64" 10 3-16/64" HTM400 4-40/64" 10 3-48/64" HTM450 5-8/64" 10 4-16/64" HTM500 5-40/64" 10 5/8" 4-48/64" HTM550 6-8/64" 10 5-16/64" HTM600 6-40/64" 10 5-48/64" HTM650 7-8/64" 10 6-16/64" HTM700 7-40/64" 10 6-48/64" HTM750 8-8/64" 10 7-16/64" HTM800 8-40/64" 10 7-48/64" HTM850 9-8/64" 10 8-16/64" HTM900 extended range clamps Band Width 5/8" style HP 4 Hose OD from to 1-16/64" 2-40/64" 2-8/64" 4-8/64" 4" 6-8/64" 6-8/64" 9-8/64" 877.963.4966 ♦ dixonvalve.com Stainless Steel Part # HP2 HP3 HP4 HP5 Dixon Worm Gear Clamps Make-A-Clamp Kits This is a maintenance clamp system in a box. By simply cutting off a piece of banding from a continuous roll, you can make any size stainless steel worm-driven clamp from 3" diameter and up. It is a must for anyone likely to encounter requirements for varying sized large clamps. •reusable • band width: ½" • band thickness: .023" • screw design: 5/16" slotted hex head • band and housing material: 302 stainless, screw material: 410 stainless Stainless Steel Part # 4000 4001 4002 4004 4005 4006 4007 4008 Contents mini kit: 8½' band, 3 adjustable fasteners, 1 band splice kit with 100' band, 25 adjustable fasteners, 10 band splices kit with 50' band, 10 adjustable fasteners, 5 band splices box with 10 adjustable fasteners : priced per box box with 100' band, 10 band splices box with 50' band, 5 band splices 6" demonstrator kit with clamps box with 10 band splices : priced per box Dixon Racks for Worm Gear Clamps • top load metal rack made of nickel plated steel rods with enameled steel sign • sign identifies each clamp size and diameter range • rack with clamps contains 9 clamp sizes with diameter ranges from 7/32" - 2-¾" • • • • • 30 of part# MH4 30 of part# MH6 20 of part# HS10 20 of part# HS12 20 of part# HS20 Clamps included are: • • • • 20 of part# HS24 20 of part# HS28 20 of part# HS32 20 of part# HS36 CRWC Description with 200 clamps without clamps Part # CRWC CR CR Safety Dixon's couplings and retention devices are designed to work safely for their intended use. The selection of the proper hose, coupling and retention device, and the proper application of the coupling to the hose are of utmost importance. Users must consider the size, temperature, application, media, pressure and hose and coupling manufacturer's recommendations when selecting the proper hose assembly components. Dixon recommends that all hose assemblies be tested in accordance with the Rubber Manufacturers Association's recommendations and be inspected regularly (before each use) to ensure that they are not damaged or have become loose. Visit RMA.org for more information. Where safety devices are integral to the coupling, they must be working and utilized. The use of supplementary safety devices such as safety clips or safety cables are recommended. If any problem is detected, couplings must be removed from service immediately. Dixon is available to consult, train and recommend the proper selection and application of all fittings we sell. We strongly recommend that distributors and end users make use of Dixon's Testing and Recommendation Services. Call 877-963-4966 or click dixonvalve.com to learn more. Dixon 877.963.4966 ♦ dixonvalve.com 5 Dixon is recognized as the premier manufacturer and supplier of hose fittings and accessories spanning a wide range of industrial uses. Dixon’s range includes products for food, dairy processing, beverage and brewery, mobile tankers, mining, construction, chemical processing, petroleum, oilfields, refining and manufacturing. dixonvalve.com • Customer Service: 877.963.4966 Dixon Valve 800 High Street, Chestertown, MD 21620 ph: 877.963.4966 fx: 800.283.4966 Dixon Customer Service © 2012 DVCC Facebook Page YouTube Videos WG0712_WEB
© Copyright 2024 Paperzz