Square D® Wall Switch
Occupancy Sensor With
Manual On
Square D ® Wall Switch Occupancy Sensor with Manual-On employs
the latest passive infrared (PIR) technology to automatically control
lighting for areas up to 1000 square feet. Complies with California
Title 24 Residential Building requirements for Bathrooms, Garages,
Laundry Rooms and Utility Rooms.
For maximum energy savings, the Square D Wall Switch Occupancy
Sensor with Manual-On requires the user to switch on lighting
manually by pressing the button on the front. Employing a special
180˚ multi-segmented lens and PIR motion sensor, the sensor reliably
detects occupancy to keep lights on while the room is occupied. This
unit will automatically switch the lights off after a pre-set delay if no
motion is detected.
Front view of the Automatic Wall Switch
Replacement Occupancy Sensor with Manual On
The Square D Wall Switch Occupancy Sensor is easy to install.
Connecting to existing active line and ground wiring similar to a
typical wall switch, the Wall Switch Occupancy Sensor is the simplest
way to achieve energy-saving lighting control with minimal installation
time.
To assure long relay life, Square D has developed a low energy
switch circuit to assure maximum contact life. These sensors are
compatable with electronic and magnetic ballast loads.
Features

Available in white and ivory with matching decorator wall plate cover.

Manual On / Auto Off

Manual bypass

120 or 277 VAC input (no neutral required)

No power pack required

No minimum load

180˚ field of view (Up to 1000 sq. ft.)

User adjustable time delay from 15 sec. - 30 minutes

Red LED motion indicator blinks to indicate motion detection

Suitable for use on all electronic and magnetic ballasts

Furnished with (3) x 6 inch external wires (pig tails)

UL and cUL Listed

Five-year warranty
Specifications
Wall Switch Replacement Occupancy Sensor
Top view of sensor field of view
Input
120 or 277 VAC 60 Hz
Output
120 VAC
• 1000 W max. incandescent load
• 1000 VA max. ballast load
• 1/4 hp max. motor load
277 VAC
• 1800 VA max. ballast load
Operating
Temperature
32 - 122o F (0 - 50oC)
Humidity
90% max. relative humidity
non-condensing
Standards
UL and cUL Listed
FCC Part 15, Home and Office Use (Class B)
Title 24 Certified
Order Information
Side view of sensor field of view
Description
Catalog Number
Wall Switch Occupancy Sensor
With Manual On (white)
SLSPWS1277MW
Wall Switch Occupancy Sensor
With Manual On (ivory)
SLSPWS1277MI
©2007 Schneider Electric All Rights Reserved
Sensor features
Sensor wiring
Schneider Electric North American Operating Division
295 Tech Park Drive
Square D and the
logo are trademarks or registered trademarks of Schneider Electric
LaVergne, TN 37086
and/or its affiliates in the United States and/or other countries.
Tel: 1-888-squared
www.squaredlightingcontrol.com
Document Number 1200HO0602R1/07
1/07