2015/2016 STUMPJUMPER FSR / RHYME FSR SCHEMATIC 40 1.J C: S-LINK @ FRAME PIVOT 1.I 2.F CHAINSTAY CHAINSTAY FRAME 2.C FRAME 2.A 2.E S-LINK 1.F 1.G 2.B 1.D 1.A 1.B 1.C 1.E 2.H 1.K 1.L 2.D 1.N 2.G 2.I 1.H 2.J S-LINK D: S-LINK @ SEATSTAY PIVOT E: S-LINK @ YOKE PIVOT 2.H 2.J 2.K SEATSTAY SEATSTAY B: DROPOUT PIVOT SHOCK 1.O 1.M A: BOTTOM BRACKET PIVOT FRAME YOKE F: SHOCK @ FRAME 2.G 2.K 2.L 1.G 1.F 1.H 1.F 1.L 1.K 1.M 1.G 1.K 1.L 1.N 1.O 1.J 1.I 1.N 2.E 2.I 2.D 2.F TACO BLADE (replaces 1.D when using front derailleur) 2.A 2.C 1.D 1.A 1.A 1.C 1.C 1.B 1.E 2.B 2015/2016 STUMPJUMPER FSR / RHYME FSR SCHEMATIC 40 BEARING KIT PART # S160600001 ITEM # LOCATION SPECIALIZED BICYCLE COMPONENTS SPECIFICATION PART QTY MATERIAL DESCRIPTION Ø OD Ø ID WIDTH Bearing 2 Steel 1524F (full complement bearing) 24 15 5 Sleeve 1 Aluminum Square profile O-ring 2 Rubber 1-D Spacer 1 Aluminum 1-E Spacer 1 Aluminum Bearing 4 Steel 6801V-2RS 21 12 5 Spacer (outer) 4 Aluminum With dust shield. Chamfer faces bearing 20 12.1 2.5 Spacer (inner) 2 Aluminum Square profile 18.5 12.1 2 Bearing 2 Steel 6800V-2RS 19 10 5 Spacer 2 Aluminum With dust shield. Chamfer faces bearing 16.5 10.1 3 Bearing 4 Steel 6800V-2RS 19 10 5 Spacer (outer) 4 Aluminum With dust shield. Chamfer faces bearing 18 10.1 2.5 1-A 1-B 1-C Bottom Bracket 1-F 1-G Dropout 1-H 1-I 1-J S-Link @ Seat Tube 1-K 1-L S-Link @ Seatstay 19 15 44 19.6 14.8 2.4 Square profile (2x drivetrain: use Taco Blade) 21.6 15.1 3.9 With dust shield. Chamfer faces bearing 23.5 15.1 3 1-M Spacer (inner) 2 Aluminum Square profile 16.5 10.1 2 1-N Bearing 4 Steel 6801V-2RS 21 12 5 Spacer 2 Aluminum Square profile 18.5 12.1 2 1-O S-Link @ Yoke BOLT KIT PART # S160500001 ITEM # LOCATION 2-A 2-B Bottom Bracket 2-C 2-D 2-E 2-F 2-G 2-H 2-I Dropout S-Link @ Seat Tube S-Link @ Seatstay S-Link @ Yoke 2-J 2-J Upper shock eye 2-K 2-L Lower shock eye 15130 Concord Circle, Morgan Hill, CA 95037 (408) 779-6229 0000056004_SC_R2, 09/15 Please note all instructions are subject to change and updates without notice. Please visit www.specialized.com for periodic tech updates. Feedback: [email protected] SPECIFICATION PART QTY MATERIAL Ø OD Axle 1 Aluminum 15 Axle Washer 1 Steel 18 15.5 0.7 Axle Cup 1 Aluminum 20.5 15 6.7 Bolt 2 Aluminum 12 Washer 2 Steel 20 12.8 0.5 Bolt 2 Aluminum Bolt 2 Aluminum Washer 2 Steel 15.5 Bolt 2 Aluminum Bolt (Carbon frame) 1 Bolt (Alloy frame) 1 Washer Bolt (not included) NOTE: Apply blue threadlocker to all threads Ø ID THREAD LENGTH TOOL MM TORQUE in-lbf (Nm) M15 77.5 Allen key 8 182 (20.5) M11 28.3 Allen key 6 113 (12.8) 10 M10 17.4 Allen key 6 96 (10.8) 10 M9 28 Allen key 6 130 (14.7) 12 M12 20.5 Allen key 6 148 (16.7) Aluminum 8 M8 54 Allen key 6 113 (12.8) Aluminum 8 M8 42 Allen key 6 113 (12.8) 1 Steel 12.5 0 Steel 8 M8 14 Allen key 5 175 (19.8) 10.1 8.4 WIDTH 0.5 0.5
© Copyright 2024 Paperzz