.---------------_._---
--
Edge processing of
rectangular glass
innovative
efficient
individual
RS 89.07 auto-format A8 (DBPa)
100% productivity due to 0 set-up time
Cut or polished edges of square glasses
with top radii or chamfers at the four corners
highly profitable with single piece production
• Fully automatie set-up, no change ot vacuum cups suction unit required
• Perfect edges around the complete shape with individual corners and pockets
• Tool change outside working area
• Up to 60 pieces/hour
tor ground glass with different sizes
RStechnO!Ogy
What ever you need - we serve it best
~
precision
parts / machines
glass
/ service
RS 89.07 auto-format A8 (OBPa)
100% productivity due to 0 set-up time
Features for the Future:
A1 Auto-Read
••
Program generation by reading a barcode
A2 Auto-Trans
••
Glass blanks are transported to the working area
A3 Auto-Format ••
The glass is always placed in the right position on the open suction units
A4 Auto-Profile
The profile of the glass edge is shaped into the polishing wheel
••
A5 Auto-Comp
A6 Auto-Cool
The tools are measured during process and corrected by the control device
••
Tools are always provided with sufficient cooling water directly at the contact point
with the glass (independent of the diameter of the tool, or the contour of nie glass)
A7 Auto-Sharp
Diamond tools are sharpened by a stone during process
AB Auto-Dress
The polishing tools are continually kept at an equal profile depth, without any action
by an operator
Technical data:
Glass size:
max 1800 x 1000 mm; min 130 x 300 mm
Glass thickness:
2 - 12 mm
Tolerance:
± 0,1 mm (bis 1000 mm)
Cutting speed:
rnax 38 m/min
Spindie:
Frequency-controlled up to 18000 min-1
Spindie concentricity:
<0,005 mm
Type of edge cut:
Peripheral, e.q. C-edge, straight edge with margin, chamfer etc.
Tools:
Diamond and polishing cutting disks, 0 60 and 0 150 mm
Tool change:
Quick-tool change system, optional automatie tool change
Cooling:
Multi-channel-cooling for the use of different tool diameters
o 60 and 0 150 mm, CNC-controlled, without any setting
Glass positioning:
Fixation on vacuum plate, self-opening, automatically in the right position
Loading:
Manually, outside wet area, while the machine runs
-
-
• Without action by an operator, one glass after the other,
with completely different dimensions
• Ground or polished
precision parts / machines / service
• Up to 60 pieces per hour
What is your target
tor
single piece production?
Take advantage of our know-how!
RS technolögy GmbH & Co. KG
Hans-Vogel-Straße 121
0-90765 Fürth
Germany
Telefon +49 911 733 05-40
Telefax +49 911 733 05-38
[email protected]
www.rs-technology.de