18.14
19.66
THE EC SERIES OF SERVICE CRANES BY
4.90
5000#
2270 kg
®
Reach in Feet/Meters
Capacity in Pounds/Kilograms
4885#
2215 kg
21'3"
6.48m
2500#
1130 kg
CG
18'
5.49m
5000#
2270 kg
29.53
5000#
1765#
2270 kg
800 kg
3335#
0
1510 kg
15'
4.57m
2350#
5000#
2270 kg
2270 kg
75º
650 kg
5000#
1920#
3525#
870 kg
1595 kg
45º
EC5000
EC
5000
12'
3.66m
2270 kg
60º
38.93
1440#
1065 kg
5000#
80º
9'
2.74m
TECHNICAL SPECIFICATION GUIDE
1290#
2875#
1300 kg
30º
585 kg
1720#
780 kg
15º
6'
1.83m
2580#
1170 kg
3'
EC5000
EC
5000
TECHNICAL SPECIFICATION GUIDE
SPECIFICATION INFORMATION
Crane Rating:
Standard Boom Length:
25,000 ft-lbs (3.46 ton-meters)
10’ (3.05 m) from CL of Crane
Boom Extension:
• 1st stage:
• 2nd stage:
Hydraulic 60" (152.4 cm)
Manual 60" (152.4 cm)
Max. Horizontal Reach:
20’ (6.10 m) from CL of Crane
Maximum Vertical Lift:
(from crane base)
21’ 3” (6.48 m)
Boom Elevation:
-5 to +80 degree
Stowed Height:
(crane only)
29.53” (75 cm)
DEFINING CHARACTERISTICS
Planetary Drive Winch System
The winch is equipped with a 1.8 HP permanent
magnet electric motor with a 315:1 planetary gear
reduction system. This ensures that your winch will
never quit lifting before it reaches the full rated
capacity.
Double Boom Design
The double boom design makes it nearly twice as
strong as the nearest competitor.
Gear Bearing Rotation
Uses same rotation system as the larger class
cranes. There are no plastic bushings or brass
gears in the rotation system. It uses a high strength
steel ball bearing turntable gear, a high strength
steel worm gear, and a cast steel worm gear
housing.
Integral Rotation Stop
410 degrees of rotation with an integrated rotation
stop. Integrated stops allow you the greatest
performance while protecting wires and hoses from
damage.
Mounting Space Required:
19” x 19” (48.3 x 48.3 cm)
Shipping Weight:
1180 lbs (535 kg)
Controls:
Radio control standard for all
functions
20’ of Reach
Hydraulic 1st stage extension. Manual 2nd stage
extension.
90’ (27.4 m)
5/16" (.79 cm)
16 ft/min (4.88 m/min)
2500 lbs (1134 Kg)
5000 lbs (2268 Kg)
Radio Remote
Comes standard with a radio remote control.
Winch
• Rope Length:
• Rope Diameter:
• Line pull speed:
• Max. single part line:
• Max. double part line:
Rotation:
410 degree power
(worm gear)
Lifting Capacities:
5000 lbs @ 5’ (2268 Kg @ 1.5 m)
1250 lbs @ 20’ (565 Kg @ 6.1 m)
Power Supply Required:
12 volt power unit
2.0 gpm @ 2900 psi
(7.57 lpm @ 200 bars)
NOTE: All Stellar cranes meet ANSI B30.5 and OSHA 1910.180 specifications.
Specifications subject to change without notification.
stellarindustries.com
EC5000 CAPACITY CHART
5000#
2270 kg
GEOMETRIC DIMENSIONS
Reach in Feet/Meters
Capacity in Pounds/Kilograms
4885#
2215 kg
18.14
21'3"
6.48m
19.66
2500#
1130 kg
18'
5.49m
5000#
2270 kg
5000#
1765#
2270 kg
800 kg
3335#
1510 kg
15'
4.57m
2350#
5000#
2270 kg
80º
2270 kg
75º
124.41
1440#
1065 kg
5000#
12'
3.66m
650 kg
5000#
134.90
2270 kg
60º
1920#
3525#
870 kg
1595 kg
45º
9'
2.74m
CG
1290#
2875#
1300 kg
30º
585 kg
29.53
17.00
1720#
6'
1.83m
780 kg
2580#
15º
1170 kg
38.93
3'
.914 m
2500#
1135 kg
0'
3'
.914 m
6'
1.83m
9'
2.74m
10'
3.05m
Weight of load handling devices are
part of
of load
the load
lifteddevices
and must
Weight
handling
arebe
from
theand
capacity.
partdeducted
of the load
lifted
must be
deducted from the capacity.
1665#
760 kg
15'
4.57m
1250#
565 kg
0'
20'
6.10m
Maximum 1 - part line capacity is
2500lbs (1130kg).
For capacity
greater loads,
Maximum
1 - part line
is
use 2lbs.
- part
line.
2500
(1130
kg). For greater
loads, use 2 - part line.
ROTATIONAL CLEARANCE
.
HOLE MOUNTING DETAIL
FRONT
10.00
5.00
5.38
7.38
14.75
26.5” (67.31 cm)
®
SERVICE BODY MOUNT
Mounts on 20” deep (or larger) side packs.
2
1
Item Part
Description
Qty.
1
42985 Cap Scr 0.88-9x1.75 HHGR8ZY 4
2
8648
Washer 0.88 SAE GR8
4
Your local dealer:
®
Our People. Our Products.
190 State Street
P.O. Box 169
Garner, IA 50438
Telephone: (641) 923-3741 • (800) 321-3741
Fax: (641) 923-2812
Internet: www.stellarindustries.com
Email: [email protected]
An Employee Owned Company.
For the most up to date version of this brochure, please visit www.stellarindustries.com.
Copyright © 2009 Stellar Industries, Inc.
2/09