Facts and figures
ALLROUNDER 570 S
www.arburg.com
Distance between tie bars: 22.44 x 22.44“ (570 x 570 mm)
Clamping force: 176, 220, 242 tons
Injection unit: 8.2 oz, 15.3 oz, 29.1 oz
130.71
23.82
31.501)2)
14.57
39.37
12.01
47.243)
193.311)2) 209.063)
194.691) 208.662) 232.093)
64.37
74.80
Electrical connection
Cooling water connection
.35
R15
1)
2)
3)
4)
2
Injection unit 8.2 oz
Injection unit 15.3 oz
Injection unit 29.1 oz
Conveyor belt
88.581) 88.982) 89.763)
8.46 / 17.134)
8.27
32.48
10.04
24.61
62.80
min. 8.27
max. 15.16
5.91
12.99
55.52
Machine dimensions
31.89
78.74
570 S
570 S
Technical data
EN-US
570 S
Clamping unit
0
with clamping force
max. tons
Opening force | stroke
max. tons | inch
0
570 S
0
0
0.00
176
220
0
242
0
57.20 | 25.59
0.00
0
0
0.00
0.00
0.00
Mold height, fixed | variable
min. inch
0.00
0.00
9.84 | ---
0.00
Platen daylight fixed | variable
max. inch
0.00
0.00
35.43 | ---
0.00
0.00
inch
0.00
0.00
22.44 x 22.44
0.00
0.00
Mold mounting platens (w x h)
max. inch
0.00
0.00
31.30 x 31.30
0.00
Weight of movable mold half
max. lbs
Distance between tie bars (w x h)
Ejector force | stroke
0
max. tons | inch
Dry cycle time EUROMAP ²
3080
7.70 | 7.87
0.00
0.00
1 pump
min. s - inch
0
0.0
0.00
0
2 pumps
min. s - inch
0
0.0
0.00
0
Accum.
min. s - inch
0
0.0
0.00
Injection unit
0.00
0
0.00
0.00
3.1 | 2.8 - 15.71
0
0.0
0.00
0
0
2.4 - 15.71
0
0.0
0.00
0
0
0
2.3 - 15.71
0
0.0
0.00
0
8.2 oz
15.3 oz
29.1 oz
with screw diameter
mm
35
40
45
45
50
55
55
60
Effective screw length
L/D
23
20
18
22
20
18
22
20
70
17
0.00
7.87
0.00
0.00
9.25
0.00
55.1
Screw stroke
max. inch
0.00
6.30
0.00
Calculated stroke volume
max. cu. inch
9.4
12.3
15.5
19.4
23.9
28.9
34.0
40.5
Shot weight
max. oz / PS
5.0
6.5
8.2
10.3
12.7
15.3
18.0
21.4
29.1
Material throughput
max. lbs/h PS
55.0
63.8
77.0
101.2
116.6
129.8
189.2
211.2
253.0
27.5
33.0
38.5
50.6
59.4
66.0
94.6
105.6
127.6
max. psi
36250
29000
22910
35815
29000
23925
34510
29000
21315
max. psi
21315
max. lbs/h PA6.6
Injection pressure
36250
29000
22910
35815
29000
23925
34510
29000
1 pump
max. cu. inch/s
7.8
10.2
12.9
8.4 | 10.6
10.4 | 13.1
12.7 | 15.9
0.0
---
0.0
2 pumps
max. cu. inch/s
7.8
10.2
12.9
8.4 | 10.6
10.4 | 13.1
12.7 | 15.9
14.5
17.3
23.7
70.5
Holding pressure
Injection flow ²
Accum.
max. cu. inch/s
30.0
39.2
49.7
32.3
40.0
48.3
43.6
51.7
Screw circumferential
1 pump
max. ft./min
154
174
197
148 |177
164 | 197
180 | 217
0
---
0
speed ²
2 pumps
max. ft./min
171
197
220
148 |177
164 | 197
180 | 217
131
141
167
Accum.
max. ft./min
52
62
69
49
56
62
62
69
82
Screw torque
max. ft./lbs
354
406
450
0
650
0
1115
1211
1417
Nozzle contact force | retraction stroke
max. tons | inch
Heating capacity | zones
kW
Feed hopper
lbs
6.60 | 15.75
Net weight of machine
lbs
Sound press. level | Ref. only ⁴
dB(A)
22.90 | 8
80
1 pump
with injection unit
9.90 | 21.65
19.90 | 8
80
Drive and connection
80
2 pumps
Accum.
8.2 oz
15.3 oz
0
8.2 oz
15.3 oz
29.1 oz
8.2 oz
15.3 oz
18370
19030
0
18370
19030
21670
0
---
29.1 oz
0
0
70 | 3
0
0
70 | 3
0
0
70 | 3
0
0.00
68.69
0.00
0.00
68.69
0.00
0.00
103.04
0.00
max. kW
30
30
0
30
30
37
22
30
30
kW
34
53
0
42
53
63
34
53
55
Total
A
0
150 | ---
0
150 | ---
150 | ---
--- | ---
110 | ---
150 | ---
150 | ---
Machine
A
0
110 | 60
0
110 | 60
110 | 60
125|70
90 | 50
110 | 60
110 | 60
Heat
A
30 | ---
60 | ---
0
30 | ---
60 | ---
60 | ---
30 | ---
60 | ---
60 | ---
Oil filling
gal.
Drive power ²
Electrical connection ³
Cooling water connection
max. °F
min. Δp psi
Machine type
with EUROMAP size designation ¹
Drive
570 S 176 tons 8.2 oz | 15.3 oz
1 | 2 | Accum.
570 S 220 tons 8.2 oz | 15.3 oz
1 | 2 | Accum.
570 S 242 tons
- | 2 | Accum.
---
7.70 | 15.75
9.40 | 5
| 15.3 oz | 29.1 oz
77
77
86
22 | 1"
22 | 1"
22 | 1"
Upon request: other machine types and mold installation heights, screws, drive powers etc.
All specifications relate to the basic machine version. Deviations are possible depending on variants, process settings and
material type. Depending on the drive, certain combinations, e.g. max. injection pressure and max. injection flow may be
mutually exclusive.
1)
2)
3)
4)
[ ]
Clamping force (tons) - Large injection unit = max. stroke volume (cu. inch) x max. injection pressure (psi)
Specifications depend on the drive config. – 1st value applies to the lowest clamping force.
Specifications relate to 230V/60 cycles | 460V/60 cycles.
Detailed info in the operating instr.
Information applies to alternative equipment.
3
570 S
Mold installation dimensions
15.24-0-04
16.28
16.65
E
reducing ring to 4.0 inch
dia. 5.12+0.002 0.39 deep
dia. 4.92+0.002
Stroke max. 7.87
Y
X
A
B
min. 9.84
Dimensions for horizontally-displaceable
injection unit (VARIO principle) reduced
by 0.78 inch
Ø2.953)
Ø2.762)
Ø5.713)
Ø4.341)
0.39
0.83
Ø4.922)
40°
0.59-0.004
Ø2.561)
Ø1.69
Ø2.52
Ø3.23
30°
0.12
1.972.36
Bore in mold (if required) | Y
Ø1.77
Ø1.46
Ø1.77-0.004
1.71
Standard
Thermoset 1.972.36
max. 35.43
Center ejector | X
Injection unit
8.2 /15.3 oz 29.1 oz
a
Stroke max. 25.59
a max.
0.79 0.593)
for injection unit 8.2 oz1) / 15.3 oz2) / 29.1 oz3)
Thermoset version
Robotic system mounting | E
1.28
3.94
16.54
27.56
threads 5/16 -18 UNC
0.63 deep
3.84
1.38
6.89
4
threads 3/4 -10 UNC
1.53 deep
570 S
Mold installation dimensions
Fixed mold mounting platen | A
36.26
19.69
6
14
10
26
4
20
reducing ring to 4.0 inch
dia. 5.12+0.002 0.39 deep
dia. 4.92+0.0024)
6
8.66
10
threads 5/8-11 UNC 1.22 deep
14
20
26
39.37
Moving mold mounting platen | B
25.79
21.85
16
threads 5/8 -11 UNC 1.22 deep
for robotic handling device
7
5.51
1.18
4
32.32
7
16
4
Ø3.54
Ø1.06
25.98
22.44
39.37
16.28
21.14
3.54
22.44
safety gate
25.98
32.09
31.89
27.95
Useful clamping surface when pulling the tie rods
8
4) Dimensions apply to machines with
thermoset versions (without reducing ring)
23.48
.1
33
5
570 S
Shot weights
Theoretical shot weights for the most important materials
8.2 oz
Injection units
15.3 oz
29.1 oz
inch
1.38
1.57
1.77
1.77
1.97
2.17
2.17
2.36
mm
35
40
45
45
50
55
55
60
70
Polystyrene
max. oz PS
5.0
6.5
8.2
10.3
12.7
15.3
18.0
21.4
29.1
Styrene heteropolymerizates
max. oz SB
4.8
6.3
8.0
10.0
12.3
15.0
17.6
20.9
28.5
max. oz SAN, ABS1)
4.8
6.2
7.9
9.8
12.1
14.7
17.3
20.6
28.1
Screw diameter
2.76
Cellulose acetate
max. oz CA1)
5.6
7.3
9.2
11.5
14.3
17.2
20.3
24.1
32.8
Celluloseacetobutyrate
max. oz CAB1)
5.2
6.8
8.6
10.7
13.2
16.0
18.8
22.4
30.5
Polymethyl methacrylate
max. oz PMMA
5.1
6.7
8.5
10.6
13.1
15.8
18.6
22.1
30.1
Polyphenylene oxide, mod.
max. oz PPO
4.6
6.0
7.6
9.5
11.7
14.2
16.7
19.9
27.1
Polycarbonate
max. oz PC
5.2
6.8
8.6
10.8
13.3
16.1
18.9
22.5
30.6
Polysulphone
max. oz PSU
5.4
7.0
8.9
11.1
13.8
16.6
19.5
23.3
31.6
Polyamides
max. oz PA 6.6 | PA 61)
4.9
6.5
8.2
10.2
12.6
15.2
17.9
21.3
29.0
max. oz PA 6.10 | PA 111)
4.6
6.0
7.6
9.5
11.7
14.2
16.7
19.9
27.1
Polyoximethylene (Polyacetal)
max. oz POM
6.1
8.0
10.1
12.7
15.6
18.9
22.2
26.4
36.0
Polyethylene terephthalate
max. oz PET
5.9
7.7
9.8
12.2
15.1
18.2
21.4
25.5
34.7
Polyethylene
max. oz PE-LD
3.7
4.9
6.2
7.7
9.6
11.6
13.6
16.2
22.0
max. oz PE-HD
3.9
5.0
6.4
8.0
9.9
12.0
14.0
16.7
22.7
Polypropylene
max. oz PP
4.0
5.2
6.5
8.2
10.1
12.2
14.3
17.1
23.2
Fluorpolymerides
max. oz FEP, PFA, PCTFE1)
7.9
10.4
13.1
16.4
20.2
24.5
28.8
34.3
46.6
Polyvinyl chloride
max. oz ETFE
6.9
9.0
11.4
14.3
17.7
21.4
25.1
29.9
40.7
max. oz PVC-U
6.0
7.8
9.9
12.4
15.3
18.5
21.7
25.9
35.2
max. oz PVC-P1)
5.5
7.2
9.2
11.4
14.1
17.1
20.1
23.9
32.5
1) average value
ARBURG GmbH + Co KG
With locations in Europe: Germany, Belgium, Denmark, France, United Kingdom, Italy, Netherlands, Austria, Poland, Switzerland, Slovakia, Spain, Czech Republic, Turkey,
Hungary | Asia: People‘s Republic of China, Indonesia, Malaysia, Singapore, Taiwan, Thailand, United Arab Emirates | America: Brazil, Mexico, USA
For more information, please go to www.arburg.com.
© 2017 ARBURG GmbH + Co KG
The brochure is protected by copyright. Any utilization, which is not expressly permitted under copyright legislation, requires the previous approval of ARBURG.
All data and technical information have been compiled with great care. However we accept no responsibility for correctness. Individual illustrations and information may deviate from the actual
delivery condition of the machine. The relevant valid operating instructions are applicable for the installation and operation of the machine.
ARBURG GmbH + Co KG
DIN EN ISO 9001 + 14001 + 50001 certified
680130_EN_US_032017 · Subject to alterations
Arthur-Hehl-Strasse · 72290 Lossburg · Tel.: +49 7446 33-0 · www.arburg.com · E-Mail: [email protected]