Triform 610-20-3SC Specifications
Triform 610-20-3SC
Max Chamber Pressure
20,000 PSI
Forming Area
6” X 10” Oval (152 X 254 mm)
Lower Punch Force
125 Tons
Lower Punch Stroke
3” (76 mm)
Draw Depth Capacity
3½” (89 mm)
Max Punch Tool Diameter
3” X 7” Oval (76 X 177 mm)
Daylight
9¾” (248 mm)
Control System
CNC / PLC
Allen Bradley
Electrical
Allen Bradley
Touchscreen Interface
17” Color
Job Storage / Recall
500+ Job Capacity
System Dimensions
Performance
Overall System Length
48” (122 cm)
Forming Pressure Control
(+/-) 1%
Overall System Width
120” (305 cm)
Forming Position Control
(+/-) .002” (.05 mm)
Overall System Height
98” (249 cm)
Floor Space Required
125” X 68” (317 X 172 cm)
Total System Weight
10,000 lbs (4,535 kg)
The Triform 610-20-3SC is fully programmable and offers
two modes:
• Fluid Cell Process Mode
• Deep Draw Process Mode
Power System
Main Motor Horsepower
50 HP
Pump Manufacturer
Parker or Rexroth
Working Fluid
AW 46
Heat Exchanger
Included
Temp / Level Sight Gauge
Included
Main Power
480 V
Phase
3 Phase
Hertz
60 Hz
Control System Voltage
24 VDC
FLA Draw
85 Amps
The full featured controls offer job storage and recipe
handling. In addition to sequential programming of pressure
and punch position, the operator interface data/program
screens include:
• System Diagnostics
• Alarm Handling and Logging
• “In-Sight” Feature for visual inspection
• Multi-level password protection
• OEM set-up screen for remote system
performance adjustments
• PLC Input / Output visualization
• Batch Counter
Standard VPN connection via Ethernet allows for
the press system to be monitored by the factory for
immediate technical support.
Alternative Power Configurations Available
889 Horan Drive l Saint Louis l Missouri l 63026 l www.triformpress.com l www.beckwoodpress.com l [email protected] l 855-864-4670 l 636-680-2356